Browse By Repository:

 
 
 
   

Performance of Wire-EDM Parameters on Machining Characteristics of Titanium Alloy (Ti6Al4V) using Taguchi Method

Mohd Amran, Md Ali and Raja, Izamshah and Nur Izan Syahriah, Hussein and Mohd Shahir, Kasim and Mohd Amri , Sulaiman and Mohd Rizal, Salleh and Effendi , Mohamad and Sivarao, Subramonian and Pay Jun, Liew and Zulkeflee, Abdullah (2014) Performance of Wire-EDM Parameters on Machining Characteristics of Titanium Alloy (Ti6Al4V) using Taguchi Method. In: Malaysia University Conference Engineering Technology 2015, 10-11 November 2014, Melaka.

[img] Text
EDM Parameters on Machining of Ti6Al4V by Taguchi.pdf

Download (649Kb)
[img] Text
33 - Published Version
Restricted to Registered users only

Download (13Kb) | Request a copy

Abstract

The effect of wire electrical discharge machining (wire-EDM) parameters on machining characteristics of Titanium Alloy (Ti6Al4V) is studied. 0.2mm diameter of electrolytic brass wire having composition ratio Copper and Zinc 60:40 was selected as wire electrode. The experiment was done using SODICK VZ500L wire-EDM machine. Orthogonal arrays design of Taguchi method was applied to design the experimental matrix and the data was analyzed using analysis of variance (ANOVA). It is found that the most significant parameter affected material removal rate (MRR) is servo voltage followed by pulse duration, while pulse interval shows the less significant factor. The validation of optimum parameter has been done for MRR and it is found that after optimization process, the MRR can reach up to 0.044g/min, which is a 4.76% increased as compared to maximum MRR result from initial experiment. Surface roughness (RA) reduces to 4.35% meanwhile kerf width (Kw) slightly increases to 0.036% after conformation run of the optimization combination process parameters. Pulse duration of input parameter of gives the most significant impact to RA and Kw. Thus, it shows that the results of wire-EDM on Ti6Al4V are particularly useful for industrial practitioners and researchers to determine the best combination of parameters which lead to optimize the machining performance.

Item Type: Conference or Workshop Item (Paper)
Uncontrolled Keywords: wire-EDM, titanium alloy, taguchi metho, machining characteristics
Subjects: T Technology > TJ Mechanical engineering and machinery
T Technology > TS Manufactures
Divisions: Faculty of Manufacturing Engineering
Depositing User: Dr. Mohd Amran Md Ali
Date Deposited: 28 Sep 2015 01:33
Last Modified: 28 Sep 2015 01:33
URI: http://eprints.utem.edu.my/id/eprint/14827

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year