Browse By Repository:

 
 
 
   

Performance Analysis Of Evaluation Between Oil Based Coolant And Combination Of Oil Based Coolant With Palm Oil On Cutting Surface In Turning Operation

Mohd Akram Zaki, Mohd Sabri (2008) Performance Analysis Of Evaluation Between Oil Based Coolant And Combination Of Oil Based Coolant With Palm Oil On Cutting Surface In Turning Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

[img] PDF (24 Pages)
24.pdf - Submitted Version

Download (158Kb)
[img] PDF (Full Text)
Performance_Analysis_Of_Evaluation_Between_Oil_Based_Coolant_And_Combination_Of_Oil_Based_Coolant_With_Palm_Oil_On_Cutting_Surface_In_Turning_Operation_-_Mohd_Akram_Zaki_Mohd_Sabri_-_TJ1185.M42_2008.pdf - Submitted Version
Restricted to Registered users only

Download (6Mb)

Abstract

This project represents the performance analysis of coolant during turning operation. The analysis is made on the surface finish after machining. Generally, a few types of cutting fluid in market and being used as cutting fluid to the machining process will give a few advantages such as producing a good surface finish. The main purpose of this project is to investigate the performance of palm oil application as compound in coolant whether suitable or not for machining operation especially the turning operation. Other purpose is to compare and identify the best coolant between the oil-based coolant and the combination of oil-based coolant with palm oil in the aspect of surface machining. Experiment is conducted using a carbon steel AISI 1045 as a workpiece material with dimension of.250mm x 50mm. The workpiece is being turned by conventional lathe machine using (FUCHS) bacteriostatic emulsifiable cutting oil mixed with pure palm oil as coolant. The parameters setting such as cutting speed is set differently, 185rpm, 340rpm, 425rpm, and 625rpm. The feed rate is 0.5mm/rev and depth of cut is 0.5mm will remain constant. Surface roughness value is taken through the surface roughness tester and surface texture observation is done using metallurgy microscope. As the result, the palm oil compound will affect the surface machining and decreasing the quality of surface machining. A few factor is identified which will affect the surface roughness which are cutting speed and machining time.

Item Type: Monograph (Project Report)
Uncontrolled Keywords: Surface roughness, Machine-tools, Metal-cutting
Subjects: T Technology > T Technology (General)
T Technology > TJ Mechanical engineering and machinery
Divisions: Library > Projek Sarjana Muda > FKP
Depositing User: Nooraidillah Rasdi
Date Deposited: 03 May 2012 01:32
Last Modified: 28 May 2015 02:31
URI: http://eprints.utem.edu.my/id/eprint/2840

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year