Items where Division is "Library > Tesis > FKM" and Year is 2023

I

Ismail, Ismaniza (2023) Comparative study on bending and torsional effect of highly thermal graphene hybridization conductive ink. Masters thesis, Universiti Teknikal Malaysia Melaka.

J

Jamadi, Aida Haryati (2023) Characterization of fused deposition modelling printed kenaf fibre reinforced poly-lactic acid composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jasmee, Solehah (2023) Characterisation of hybrid graphene nanoplatelets with functionalised boron nitride as thermal interface material. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

K

Kamaruddin, Zatil Hafila (2023) Fabrication and characterisation of Cymbopogan citratus fibre reinforced thermoplastic cassava starch/palm wax composites. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

M

Mohamad, Imanurezeki (2023) Optimization of centralised air conditioning system performance for university office building. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Akram, Mohd Khairil Ridzwan (2023) Boiler tube remaining life according to Larson-Miller parameter. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohammad Noor, Norida (2023) Correlation study on different temperature-humidity of highly thermal graphene hybridzation conductive ink. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Noh, Azhari (2023) Multi-objective optimization of bio-base grease using hybrid taguchi-grey relational analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Ridzuan Tan, Nurfarah Diana (2023) Investigation on small scale DBD plasma actuator on vehicle spoiler in inducing airflow. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Salleh, Nursyaira (2023) Computational study of blood flow through vortex generator integrated mechanical heart valve. Masters thesis, Universiti Teknikal Malaysia Melaka.

P

Ponnaiyan, Jayaprakash (2023) A simulation of solar photovoltaic thermal system with spiral design absorber using MWCNT water working fluid. Masters thesis, Universiti Teknikal Malaysia Melaka.

R

Rosli, Nor Ana (2023) Development and performance analysis of a novel 4 axis MPAW-based WAAM system. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

S

Said, Muhammad Asyraf (2023) Silterra cleaning solution in post chemical mechanical polishing oxide to minimize ammoniacal nitrogen in effluent. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

W

Wan Yusof, Wan Fairuz (2023) The effect of different type of additives on friction and wear of MNR grease. Masters thesis, Universiti Teknikal Malaysia Melaka.

Z

Zulkiflee, Farisya Farhana (2023) Interface pressure distribution of conventional and 3D-printed sockets using finite element analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.