Items where Division is "Faculty of Mechanical Engineering" and Year is 2017

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 39.

Lim, Z.Y. and Putra, Azma and Mohd Nor, Mohd Jailani and Yaakob, Mohd Yuhazri (2017) Sound Absorption Performance Of Natural Kenaf Fibres. Applied Acoustics, 130. pp. 107-114. ISSN 0003-682X

Abd Samad, Md Fahmi and Mohd Nasir, Abdul Rahman (2017) Comparison Of Information Criterion On Identification Of Discrete-Time Dynamic System. Journal of Engineering and Applied Sciences, 12 (1 SI). pp. 5660-5665. ISSN 1816-949X

Abdul Munir, Fudhail and Mikami, Masato and Hassan, Muhammad Zahir and Salim, Mohd Azli (2017) Flame Stabilization In Multiple Inlet Channel Meso-Scale Tube Combustors With Wire Mesh. Journal Of Advanced Vehicle System, 4 (1). pp. 20-27. ISSN 2550-2212

Abdul Munir, Fudhail and Mohd Tahir, Musthafah and Mohd Shafie, Abdul Muhaimin and Hassan, Muhammad Zahir (2017) Development Of Numerical Model For Simulation Intake Flow In Combustion Chamber Of L-Head Engine Type. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 17 (2). pp. 134-142. ISSN 2227-2771

Abdul Munir, Fudhail and Seo, Takehiko and Mikami, Masato (2017) Optimization Of Flame Stabilization Limits In Meso-Scale Tube Combustors With Wire Mesh. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 17. pp. 186-192. ISSN 2227-2771

Ad Suhadak, Fadrah Hanim and Zakaria, Kamarul Ariffin and Ali, Mohd Basri and Yusuff, Mohd Asri (2017) Fatigue Damage Simulation Of Automobile Steering Knuckle Subjected To Variable Amplitude Loading. International Journal Of Techology And Engineering Studies, 3 (6). pp. 245-252. ISSN 2415-0924

Ahmad, Fauzi and Hudha, Khisbullah and Mazlan, Saiful Amri and Jamaluddin, Hishamuddin and Zamzuri, Hairi and Abd Kadir, Zulkiffli and Aparow, Vimal Rau (2017) Modelling And Control Of A Fixed Calliper-Based Electronic Wedge Brake. Strojniški Vestnik - Journal Of Mechanical Engineering, 63. pp. 181-190. ISSN 0039-2480

Cheah, Yee Mun and Putra, Azma and Muhammad, Noryani and Dullah, Abd Rahman and Jenal, Ruztamreen (2017) Modeling dynamics of a building using a portal frame approach. International Review On Modelling and Simulations, 10 (4). pp. 289-295. ISSN 1974-9821

Cheng, See Yuan and Abdullah, Mohd Azman and Mansor, Shuhaimi (2017) Effect Of Spoiler Angle On The Aerodynamic Performance Of Hatchback Model. International Journal Of Applied Engineering Research, 12 (22). pp. 12927-12933. ISSN 0973-4562

Dhar Malingam, Sivakumar and Mohd Ishak, Noordiana and Mansor, Muhd Ridzuan (2017) Thermoplastic matrix selection for fibre metal laminate using fuzzy VIKOR and entropy measure for objective weighting. Journal of Engineering Science and Technology, 12 (10). pp. 2792-2804. ISSN 2792 - 2804

Dhar Malingam, Sivakumar and Ng, Lin Feng and Subramaniam, Kathiravan and Ab Ghani, Ahmad Fuad and Jumaat, Faizal Azli (2017) Tensile And Impact Properties Of Cost-Effective Hybrid Fiber Metal Laminate Sandwich Structures. Advances in Polymer Technology, 37 (7). pp. 2385-2393. ISSN 0730-6679

Dhar Malingam, Sivakumar and Pilvamangalam, Nisallini and Bapokutty, Omar and Selamat, Mohd Zulkefli and Subramonian, Sivarao (2017) Quasi-static indentation behaviour of kenaf bast fibre reinforced metal laminate system. Defence S &T Technical Bulletin, 10 (3). pp. 258-271. ISSN 1985-6571 (Submitted)

Dhar Malingam, Sivakumar and Selamat, Mohd Zulkefli and Subramonian, Sivarao (2017) Investigation on Fatigue Life Behaviour of Sustainable Bio-Based Fibre Metal Laminate. Journal of Mechanical Engineering, SI 1 (1). pp. 123-140. ISSN 1823-5514

Kassim, Dg Hafizah and Putra, Azma and Mohd Nor, Mohd Jailani and Hamzah, Ain Nur Haznida (2017) Preliminary Study Of Acoustical Treatment In A Scaled Model Mosque. International Review Of Mechanical Engineering (IREME), 11 (4). pp. 222-227. ISSN 1970-8734

Mahmud, Dayang Nor Fatin and Abdollah, Mohd Fadzli and Masripan, Nor Azmmi and Tamaldin, Noreffendy and Amiruddin, Hilmi (2017) Frictional Wear Stability Mechanisms Of An Activated Carbon Composite Derived From Palm Kernel By Phase Transformation Study. Industrial Lubrication And Tribology, 69 (6). pp. 945-951. ISSN 0036-8792

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli and Hasan, Rafidah and Amiruddin, Hilmi and Abdullah, Muhammad Ilman Hakimi Chua (2017) Statistical Models For Predicting Wear And Friction Coefficient Of Palm Kernel Activated Carbon-Epoxy Composite Using The ANOVA. Industrial Lubrication And Tribology, 69 (5). pp. 761-767. ISSN 0036-8792

Md Isa, Mohamed Hafiz and Tee, Boon Tuan and Zakaria, Muhammad Zulfattah and Zulkafli, Nur Izyan and Rivai, Ahmad and Ab Razak, Juhari and Yusof, Ahmad Anas (2017) Emission Inventory For Area Source: Case Study In Majlis Bandaraya Melaka Bersejarah (MBMB) Region. International Journal Of Environment, Society & Space (IJESS), 5 (2). pp. 9-17. ISSN 2289-5299

Md Isa, Mohamed Hafiz and Zakaria, Muhammad Zulfattah and Abdul Munajat, Nurain and Abu Bakar, Fateh Sakinah and Haron, Muhammad Asyraf (2017) Cleaner Production Implementation At Chicken Slaughtering Plant. ARPN Journal Of Engineering And Applied Sciences, 12 (14). pp. 4324-4328. ISSN 1819-6608

Misha, Suhaimi and Ahmed Al-Qadhi, Ahmed Abdullah and Mohd Rosli, Mohd Afzanizam and Akop, Mohd Zaid (2017) Design And Simulation Of An Optimized Mixed Mode Solar Dryer Integrated With Desiccant Material. International Journal of Mechanical & Mechatronics Engineering , 17. pp. 65-73. ISSN 2077-124X (online) 2227-2771 (Print)

Mohamad Yusof, Humairak (2017) The Effect Of Storage Duration And Variance Temperature On High Blend Level Biodiesel Fuel Properties. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Fauzi, Afifah (2017) Characteristic Of Elderly People Hand And Its Effect To Walking Stick Handle:A Case Study In Malacca. Masters thesis, UTeM.

Mohd Ishak, Noordiana and Dhar Malingam, Sivakumar and Mansor, Muhd Ridzuan (2017) Weighting of natural fibre criteria for fibre metal laminate using entropy method for car front hood utilization. Key Engineering Materials, 740. pp. 75-80. ISSN 1662-9795

Mohd Sapuan, Salit and Jumaidin, Ridhwan and Ishak, Mohamad Ridzwan and Jawaid, Mohammad and Sahari, Japar (2017) Effect Of Seaweed On Mechanical, Thermal, And Biodegradation Properties Of Thermoplastic Sugar Palm Starch/Agar Composites. International Journal of Biological Macromolecules, 99. pp. 265-273. ISSN 0141-8130

Mustafa, Ashafi'e (2017) Selection And Optimization Of Kenaf/Epoxy Composite As An Alternative Friction Material. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mustafa, Ashafi'e and Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Shuhimi, Fairuz Fazillah and Muhammad, Noryani (2017) Optimization Of Friction Properties Of Kenaf Polymer Composite As An Alternative Friction Material. Industrial Lubrication And Tribology, 69 (2). pp. 259-266. ISSN 0036-8792

Nazan, Muhammad Afdhal and Ramli, Faiz Redza and Alkahari, Mohd Rizal and Sudin, Mohd Nizam and Abdullah, M. A. (2017) Process Parameter Optimization Of 3D Printer Using Response Surface Method. ARPN Journal Of Engineering And Applied Sciences, 12 (7). pp. 2291-2296. ISSN 1819-6608

Ng, Lin Feng and Dhar Malingam, Sivakumar and Zakaria, Kamarul Ariffin and Bapokutty, Omar and Subramonian, Sivarao (2017) Influence of kenaf fibre orientation effect on the mechanical properties of hybrid structure of fibre metal laminate. Pertanika Journal of Science & Technology, 25 (S5). pp. 1-8. ISSN 0128-7680

Ng, Lin Feng and Dhar Malingam, Sivakumar and Zakaria, Kamarul Ariffin and Selamat, Mohd Zulkefli (2017) Fatigue performance of hybrid fibre metal laminate structure. International Review of Mechanical Engineering, 11 (1). pp. 61-68. ISSN 1970-8734

Phuman Singh, Amrik Singh and Nishihara, Osamu (2017) Trajectory Generation and Tracking Using Integrated Control of 4WS and DYC for Minimum Jerk Obstacle Avoidance. In: Future Active Safety Technology toward zero traffic accidents, FAST-zero ’17, 18 September 2017, Nara, Japan.

Putra, Azma and Khai, Hee Or and Selamat, Mohd Zulkefli (2017) Oil Palm Empty Fruit Bunch Fibres As Sustainable Acoustic Absorber. Applied Acoustics, 119. pp. 9-16. ISSN 0003-682X

Sabaruddin, Saiful Akmal and Yusof, Ahmad Anas and Saadun, Mohd Noor Asril and Ghazali, Rozaimi (2017) Application Of Water As Pressure Medium In Hydraulic Hybrid System. Journal Of Engineering And Applied Sciences, 12 (16). pp. 4824-4830. ISSN 1819-6608

Sapuan, Salit M. and Jumaidin, Ridhwan and Ishak, Mohamad Ridzwan and Jawaid, Mohammad (2017) Thermal, Mechanical, And Physical Properties Of Seaweed/Sugar Palm Fibre Reinforced Thermoplastic Sugar Palm Starch/Agar Hybrid Composites. International Journal of Biological Macromolecules, 97. pp. 606-615. ISSN 0141-8130

Selamat, Mohd Zulkefli and Sahadan, Siti Norbaya and Dhar Malingam, Sivakumar and Sudiana, Yayan and Mohamad, Noraiham (2017) Epoxy/carbon black/graphite composite bipolar plate prepared by high speed mixing technique. Proceedings Of Mechanical Engineering Research Day 2017. pp. 410-412. ISSN -

Sheikh Md Fadzullah, Siti Hajar and Ifayefunmi, Olawale Friday and Mustafa, Zaleha and Omar, Ghazali and Mansor, Muhd Ridzuan (2017) Perforation Behaviour Of Composites Sandwich Structures On Low-Velocity Impact At Oblique Angles. International Journal Of Automotive And Mechanical Engineering (IJAME), 14 (2). pp. 4158-4170. ISSN 2229-8649

Sheikh Md Fadzullah, Siti Hajar and Ramli, Siti Nur Rabiatutadawiah and Mustafa, Zaleha (2017) The Effect Of Alkaline Treatment And Fiber Length On Pineapple Leaf Fiber Reinforced Poly Lactic Acid Biocomposites. Jurnal Teknologi, 79. pp. 111-115. ISSN 2180–3722

Shuhimi, Fairuz Fazillah and Abdollah, Mohd Fadzli and Kalam, M.A. and Masjuki, Hassan and Mustafa, Ashafi’e and Mat Kamal, Sushella Edayu and Amiruddin, Hilmi (2017) Effect Of Operating Parameters And Chemical Treatment On The Tribological Performance Of Natural Fiber Composites : A Review. Particulate Science And Technology, 35 (5). pp. 512-524. ISSN 0272-6351

Sivakumar, Dhar Malingam (2017) Fatigue Life Behaviour of Glass/Kenaf Woven-Ply Polymer Hybrid Biocomposites. Journal of Polymers and the Environment, 21 (3). pp. 1-11. ISSN 1566-2543 (In Press)

Sivakumar, Dhar Malingam and Selamat, Mohd Zulkefli and Subramonian, Sivarao (2017) Failure Analysis of Hybrid Fibre Reinforced Plastics for Bolted Joint under Thermal Effect. Journal of Mechanical Engineering, SI 1 (1). pp. 141-156. ISSN 1823-5514

Wasbari, Faizil and Abu Bakar, Rosli and Gan, Leong Ming and Mohd Tahir, Musthafah and Yusof, Ahmad Anas (2017) A Review Of Compressed-Air Hybrid Technology In Vehicle System. Renewable And Sustainable Energy Reviews, 67. pp. 635-653. ISSN 1364-0321

This list was generated on Mon Dec 23 14:04:44 2024 +08.