Items where Division is "Library > Projek Sarjana Muda > FKP" and Year is 2016

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | F | H | I | K | L | M | N | O | R | S | T | W | Y | Z
Number of items: 120.

A

A Azizi, Nurul Shafika (2016) Comparison Study On The Effect Of Double Pogo Pin And Single Pogo Pin In The IC Package Production. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Razak, Nur Hasinah (2016) Numerical Investigation On Different Penetration Angle In Bone Drilling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Aziz, Norfarhana (2016) Effects Of MWCNTS Surface Modification On The Thermal And Mechanical Properties Of Epoxy Filled MWCNTS Nanocomposites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahman, Nadia Adriena (2016) Effect Of Injection Moulding Parameters On Material Characteristic Of Two Plate Mould With Different Material Using Flow Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rashid, Nur Umiza (2016) Nano Hybrid Of MWCNTs GNPs Filled Epoxy Nanocomposites For Structural Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Yazid, Nurul Shuhadah (2016) Effect Of Poly Vinyl Alcohol (PVA) On The Size Of Linseed Oil (LO) Microcapsule Self-Healing Coating. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hadi, Nur Aisyah (2016) Redesign Material Handling System By Using Ergonomic Approach To Reduce Back Pain Risk. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid, Nursheda (2016) The Human Analysis And Ergonomics For The Driver Seat Design Of A Tractor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Latif, Shahida (2016) A Design And Development Of Rain-Sensing Auto Window Closure For Home. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rashid, Muhammad Faiz Haiqal (2016) Optimization Study On Process Condition Of Durian Shell Pulping Towards Hydrophobicity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah Sani, Nor Azfar (2016) Design And Development Of Vehicle Security Device By Using Biometric Identification (Fingerprint). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Noor Farah Iddayu (2016) Formation Of Iron Oxide Nanostructure By Thermal Oxidation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Sabariah (2016) Effect Of Polycation Additive On Electrophoretic Deposition Of Surface Functionalized Boron Nitride Particles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abul Jalil, Mujahidah (2016) Round Nose Bullet Design Using High-Profile Curve Definition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Mohd Aireen (2016) Evaluation On Difference Working Posture Using RULA Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nizam, Afiq Syazwi (2016) Optimization Of Process Condition On Loading Degree Of Magnetic Composite Sheet By Lumen Loading Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azemin, Masyhadi (2016) Design And Analysis Of Optimum Clearance Of An Open Small Thimble Blanking Die. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizan, Noor'ain (2016) Strength Analysis Of IC Package Through The Impact Of Dynamic Load. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmin, Ahmad Faris (2016) Human Robot Interaction (HRI) Using Simple, Interactive Robots. Project Report. UTeM, Melaka, Malaysia. (Submitted)

B

Balai, Lorita Lawi (2016) A Study To Propose Solution On Palm Oil Mill Screw Press Machine Breakdown Using QC Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Birang, Katerina (2016) Formation Of Cobalt Doped Zinc Oxide Photocatalyst For Synthetic Methyl Orange Degradation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

C

Chan, Yean Kwan (2016) Redesign Warehouse Storage And Retrieval System At Apparel Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chandran, Devaagar (2016) Investigation Phenomena Of Flank Wear At Initial Stage During Cutting Process Of Stainless Stell 304. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ab. Hamid, Mohamad Nor Hafiz (2016) Develop Standardization Work Of Coil Setup At Pressing Machine : A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ku Junoh, Sahida (2016) Design Of Model Reference Adaptive Control (MRAC) For Machine Tool Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Roizimi, Muhamad Shafiq (2016) Development Of Cutting Technology For Cutting Polymer Foam Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheong, Kai Mun (2016) Determination Of The Influence Of Chemical Treatment To The Strength Of FDM Used Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chi, Lai May (2016) Analysis And Improvement Of Extrusion Machine Breakdown In Solder Wire Manufacturing Operation Using QC Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chon, Yu Yun (2016) Preparation And Characterization Of Nano-Alumina Filled HDPE Conducting Polymer Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choo, Jia Huang (2016) Investigation Of The Effect Of Build Orientation On Mechanical Properties Of Fused Deposition Modeling Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

D

Dzulkafli, Siti Dzulaika (2016) To Analyse The Works Body Posture In Phn Industry Sdn Bhd Using Rula Assessment Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

F

Foo, Yeong Horng (2016) Optical And Photoelectrochemical Studies Of Tungsten Sulphoselenide (Wsse) Thin Films For Solar Panels. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

Halim, Nabilah (2016) Design Of Fuzzy-Pid Controller For Tracking Performance Of Machine Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamdan, Siti Nur Raheena (2016) Investigation Of Surface Integrity When Machining AISI 1045 Using Uncoated Carbide Cutting Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harun, Ahmad Izzuddin (2016) The Profile Design Identification Based On Graphical Approach Forwards Cognitive Style. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hashim, Umira Syafika (2016) Effect Of Chilled Air Coolant On Surface Roughness And Tool Wear When Machining 2205 Duplex Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

I

Ismail, Shahrul Azwan (2016) Comparisons Of Mechanical Properties Between Pure Polypropylene And Polypropylene Filled With Talc Using Single Gate And Twin Gate Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

Kamar Din, Tasnim (2016) Effect Of Carbon Nanofiber Nanofluid On Turning Of D2 Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kee, Kai Hung (2016) Redesign Of Polar Cutting Workstation In Paper Cups Manufacturing Industry Using Ergonomics Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairulazdan, Nur Khairunisya (2016) Study And Analysis Of Cognitive Style Towards The Affective Design In Kansei Engineering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

L

Lai, Chii Chung (2016) Effect Of Surface Functionalization By Naoh On Electrophoretic Deposition Of H-BN Particles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Pei Jing (2016) Optimizing Ceramic Shell Thickness To Enhance Its Permeability. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Shi Guo (2016) Effect Of Cold Arc To Deflection In Continuous Welding Of Thin Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Song Jin (2016) Design Of Noise Insulator For Metal Stamping Operation In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Wen Long (2016) Cyclic Voltammetry Analysis Of Tungsten Sulpho Selenide (WSSe) Thin Films By Electrochemical Route. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Weng Tack (2016) Structural And Electronic Properties Of Metal Oxides Attached To Single-Walled CNT As Li-Ion Battery Electrode By Using DFT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Chiew Jie (2016) Application Of Triz And ANP In Selecting The Best Concept Design At The Conceptual Design Stage For An Automotive Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Chooi Jing (2016) Tools For QRM Implementation In Job Shop Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Jin Tzen (2016) Analysis And Improvement Of Lubricant Blending Cycle-Time Inconsistency Using QC Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Liyem (2016) Investigation Of Tool Wear When Machining AISI 1045 Using Uncoated Carbide Cutting Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Reo Sei (2016) Development And Acoustical Analysis Using Kenaf And Coconut Fibres At Different Fibre Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Suzanne Shien Thung (2016) The Application Of TRIZ Reduce Speed Loss In Semiconductor Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling, Gordon Teck Poh (2016) Framework For Robotic Work Cell Configuration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

M. Azhar, Ume Nur Ashikien (2016) Human Robot Interaction (HRI) For Kindergarten Children Using Humanoid Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mani, Nirmessini Maselah (2016) Application Of Kaizen To Prevent Slip Of Defective Products To Internal Customer In Automobile Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazda, Nur Syahirah (2016) The Effects Of Shaft Misalignment At Different Speed On Vibration And Sound Emission. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Muhamad Hafeez Fikri (2016) Microstructural Characterization And Mechanical Properties Of Semisolid A356 Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed, Hazim (2016) Preliminary Investigation Of Visual Features For AGV Localization Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Hairi, Mohamed Azelan (2016) Mircostructural Morphology And Mechanical Properties Of Rheocast A319 Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad, Muhammad Nur Azizi (2016) Development Of A Framework For Remanufacturing Of LCD Monitor At The Disposal Stage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Arshad, Noorazian (2016) A Study On Relationship Between Hand Pressure Grip Force With Hand Tool Vibration At Automotive Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azman, Mohamad Huzaifa (2016) A Study Of Cobalt Catalyst Preparation For Carbon Nanotube Powder Growth By Using Alcohol Catalytic Chemical Vapor Deposition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hajazi, Aini Syahida (2016) Investigation Of Drilling Process Using Nanofluid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kassim, Mohammad Khairul Azmi (2016) Influence Of Air Speed And Spray Pressure On Urea Granule Physical Properties. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Maliki, Mohd Adli Arif (2016) Study To Optimise Interior Field Flow Of A Lobe Pump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasir, Faarih Farhan (2016) Development Of Compressed Air Powered Bicycle (CAPB) Using Linear Actuator (Pneumatic Cylinder). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Razali, Mohammad Taqiyuddin (2016) System Response For Lightweight Robot Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Raziff, Muhammad Shahmir (2016) Designing A Friendly Campus "Learning Environment" Model For FKP Students Using Product Service System Concept. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Salim, Muhammad Ammar Luqman (2016) Accuracy And Repeatability Analysis Of Industrial Robot Under Loaded Conditions And Various Distances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sani, Erni Natasya (2016) Evaluation Of Risk Factor In Manual Load Carrying. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Tajwi, Nurul Akmar (2016) Design And Development Of Cylinder LPG Trolley For Domestic Use. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zambre, Mohammad Nurul Safwan (2016) Development Of Holding Jig For Cutting Of Polymer Foam Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zin, Ameir Asyraff (2016) Investigation Of Mechanical Properties Of Plastic Product For Two Plate Family Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Nor, Nor Amalina (2016) Effect Of Agitation Rate And Reaction Temperature On The Size Of Linseed Oil Microcapsule Self-Healing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nor, Nor Nazihah (2016) Development Of Overall Performance Effectiveness (OPE) At The Semiconductor Industry : A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustapa, Siti Nure Fatima (2016) Development Of Easy And Quick Plug In Plastic Wall Tiles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

N

Napi, Fauziah (2016) Circuit Defects Detection Of Flexible Printed Circuit By Electrophoretic Deposition Of Organic DYE. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Ai Xin (2016) Design And Development Of Broader Viewing Angle Device For Motorcyclist To Improve Safety. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Mee Chin (2016) A Study To Determine The Best Combination Of FDM Process Parameters Using Taguchi Method To Optimize The Build Time And Surface Quality. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Qi Mun (2016) Design Of Manual Milling Operation Workstation For Product Dimensional Accuracy And Safe Posture. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Yean Kit (2016) A TRIZ Approach To Reduce Unscheduled Downtime In Semiconductor Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ngu, Ung Hie (2016) Effect Of Fibre Size And Sample Thickness On Kenaf Core As A Potential Acoustical Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Hisham, Nurul Asyikin Ahmad (2016) Synthesis Of Tio2 Nanostructure By Anodic Oxidation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noridan, Norfadlihady Zharif (2016) Pneumatic Control Of Six Legged Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norizan, Annasuha (2016) The Improvised Design Of Headphone Using Integration Of Kano Model And QFD For Increasing Customer Satisfaction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

O

Ong, Chien Chung (2016) Structural Characterisation And Properties Of Lead-Free Solders On Different Surface Roughness Of Copper Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ooi, Yee Khai (2016) Optimization Of Vision-Guided Mobile Robot Navigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

R

Razak, Muhammad Shahmi (2016) Flexural Test On Virgin And Recycle HDPE Specimen. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razali, Roslina (2016) Redesign Of Weaving Department Layout Using Systematic Layout Planning (SLP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozuli, Nurul Atikah (2016) Design And Analysis Of Optimum Clearance Of An Open Small Thimble Bending Die. Project Report. UTeM, Melaka, Malaysia. (Submitted)

S

Samsudin, Nur Alina (2016) Analysis On Human Factor For Manual Handling Worker And Design For Improvement Of Table Workstation In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sapani, Norshafiyanarina (2016) Bees Algorithm Inspired By Grenade Explosion Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarjuni, Noor Afiqah Nabila (2016) Semisolid Processing Of Aluminium LM6 Alloy Using Cooling Slope Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Selvaraju, Kalaiselvan (2016) Increasing ABB Flexpicker Robot's Degree Of Freedom For Automated Product Assembly Task. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sha'arani, Fatin Izzati (2016) Optimization Of Injection Moulding Parameters Of Three Plate Injection Mould Using Flow Analysis Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nurliza, Mohamad (2016) Expert System Of Maintenance Problems For Square Foiling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sivapragasam, Thiliban (2016) Design Of Automatic Loading And Unloading Of Workpiece System For HAAS CNC Milling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Su, Zhi Qian (2016) Determination Of Tensile Properties Of Topologically Optimized FDM For End-Used Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suberi, Hanis Amira (2016) Effect Of Surfactant On The Surface Integrity Of Stainless Steel Using EDM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

T

Tam, Yau Yin (2016) Modelling Overall Equipment Effectiveness Improvement With Overall Production Cost. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Chia Hwa (2016) Performance Analysis Of Different Blade Design For Waste Kinematic Energy Recovery System (WKERS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Lee Ping (2016) DMAIC Approach To Reduce Total Duration Of Prototyping Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tang, Kah Chun (2016) Development Of A 3-Axis Articulated Type Robot Arm With A Mobile PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Kok Chen (2016) Structural Characterization Of Tungsten Sulphoselenide (Wsse) Thin Films For Semiconductor Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tew, Huei Theng (2016) Preparation And Charaterization Of Kenaf Fiber Reinforced MWCNTS-EPOXY Multi-Scale Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Thavan, Lingeshpari Vasu (2016) Industrial Case Study On The Effect Of Particle Size On Warpage Of Alumina Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tong, Chee Kiet (2016) Design And Simulation Studies Of 3-Axis Articulated Robotic Arm With PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

Wan Nor Azman, Wan Ainul Syafika (2016) Study And Analysis Physiognomic Toward The Product Design (Kansei Engineering). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Yaacob, Wan Nur Hidayah (2016) An Analysis And Measurement For The Customer Design Preferences. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wo, Angeline Weng Wei (2016) Production And Characterization Of Fibrillated Nanocellulose Fiber Derived From Spent Tea Leaves. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Yung Cheng (2016) Analysis Of Sound Absorption Properties Of Spent Tea Leaves-Polypropylene Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Y

Yap, Sin Yin (2016) Effect Of Thermoplastic Mesh Incorporation On The Mechanical And Physical Properties Of Fibre Reinforced Laminate Structures. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yeap, Hong Kheng (2016) Mechanical And Physical Analysis On The Effect Of Commercial Aluminium Mesh In Fibre Reinforced Laminate Structures. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yoong, Sai Sieng (2016) Process Parameter Relationship Of Stainless Steel To Carbon Steel Pipes Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Z

Zakaria, Ahmad Zikri (2016) Design And Analysis Of A Plastic Book Mark Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Muhammad 'Izzat (2016) Incorperating Levy Flight Method On The Bees Algorithm With Pseudo-Gradient Towards Numerical Benchmark Test Functions. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zamri, Nurin Aifaa (2016) Design Optimization Of Car Jack Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zin, Muhamad Sharul Nizam (2016) Improvement On Pump Footing System For Misalignment Correction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zubaidi, Nur Zurain (2016) Analysis Comparison Between Solidworks Plastics And Simulation Moldflow Adviser Of Optimum Gate Size For The Design Of A Single Cavity Plastic Name Card Holder Mold. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkifli, Azni (2016) Optimization Of Conceptual Manual Wheelchair Design Using Integrated QFD And DFMA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

This list was generated on Fri Oct 18 03:09:09 2019 +08.