Browse By Repository:

 
 
 
   

Items where Division is "Library > Projek Sarjana Muda > FTK" and Year is 2017

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Jump to: Monograph
Number of items: 306.

Monograph

A.Fadzil, Nur Fazreeha Ameelya (2017) The Optimization Of Cold Metal Transfer (CMT) Welding Process Parameters On 5052 Aluminium Alloy Tensile Strength Using Taguchi Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Aziz, Muhammad Azraei (2017) Development Of IoT Smart Home Controller Using Biosensor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab Latif, Norhazlia (2017) Conceptual Design And Fabrication A Novel Energy Harvester For Malacca River. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rahman, Mohd Khairul (2017) Development Of Grip Strength Monitoring System For Stroke Patient. Project Report. UTeM, Melaka. (Submitted)

Abd Aziz, Azrul Muhaimin (2017) Generating Electricity From Tyre Rotation System Using Statistical Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Aziz, Ihsan Fikri (2017) Development Of Automatic Healthcare System By Using GSM For Paralysis Patient. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Ghafar, Abdullah Ariff (2017) Development Of Portable Lifter To Lift Outdoor Unit For Split Type Air-Conditioning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahim, Muhammad Mustaqim (2017) Development Of IoT Wheelchair For Rehabilitation. Project Report. UTeM, Melaka. (Submitted)

Abd Rahman, Mohd Shamsul Izhar (2017) Design And Analysis Of The Suspension System For The Agricultural Smart Mover With Using Total Design Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahman, Najwa (2017) Development Of Surveillance System Using Raspberry Pi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rama, Nur Syafiqah (2017) Development Of A Smart Baby Stroller Using Bluetooth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Razak, Safiah (2017) Bandwidth And Gain Enhanced Of Patch Antenna With Metamaterial Waveguide. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Wahid, Syakira (2017) Development Of Car Temperature Cooling Control By Using Magnet Code. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nur Liana (2017) Optimization Of Tribological Performance For Purify Engine-Oil Enhance By Nanoparticles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nur Syafiqah (2017) Design And Development Of Fly-Mosquito Trapping Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Gaffar, Muhammad Sayyid (2017) Investigation Of Load Bearing Capacity On Different Bio-Lubricant Enhance By Nanoparticles Using Extreme Pressure Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Garapar, Abdul Rahiman (2017) Study Of Glass Tint Effectiveness As Heat Resistant In Buildings. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Nor Faizah (2017) The Optimization Of Friction Stir Welding Parameter For Aluminium 5052 By Using Full Factorial Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Latef, Muhammad Syazwan (2017) Design Of Water Filter System Containing Rice Husk And Kapok Fiber For River Trash Collector System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Muhammad Atikkullah (2017) Design And Development Wind Turbine Generator By Using Arduino. Project Report. UTeM, Melaka. (Submitted)

Abdul Rahman, Nabil Haikal (2017) Development And Optimization Of Portable Vacuum Clamping. Project Report. UTeM, Melaka. (Submitted)

Abdul Rani, Mohamad Hakim (2017) Development Of GPRS Signal Amplifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Nur Amiera Ashraf (2017) Analysis Performance Of Fiber Optic Sensors In Fully Synthetic Engine Oil Monitoring System With Different Concentration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Nurul Ameera (2017) Development Of Fiber Optic Sensor For Semi-Synthetic Engine Oil Performances With Different Concentrations. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Razi, Muhammad Haidhir Firdaus (2017) A Development Of Motorcycle Engine Oil Performance Monitoring System Using Fiber Optic Cable. Project Report. UTeM, Melaka. (Submitted)

Abdul Samat, Abdul Hafiz (2017) Select And Install Engine For Agricultural Smart Mover. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Zali, Muhammad Ridzuan (2017) Investigation Of Energy And Cost Effectiveness Between Electric Water Heater And Energy Harvested From 1.0 HP Air Conditioner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Fatin Nadia (2017) Experimental Investigation On Mechanical Properties Effect For Different Orientation Of Kenaf Fiber Composite Through Tensile And Impact Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Mohd Fairuz (2017) Fabrication Of Emergency Tyre Inflator Generated From Motorcycle Exhaust Gas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Hafizul Aliff (2017) DC Motor Speed Control Using Measured Distance By Ultrasonic Sensor. Project Report. UTeM, Melaka. (Submitted)

Abu Bakar, Muhammad Azad (2017) Conversion Of Go-Kart To E-Kart Mounting Design And Fabrication. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Hanifah, Hariz (2017) Introduction Of Double Gyroscope Concept For Motorcycle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adnan, Anis Azwa (2017) Development Of Automated Key Management System Using LabVIEW. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afandi, Siti Fatimah (2017) Muscle Activity Analysis Using Surface Electromyography (sEMG) For Passenger While Riding Moving Train In Prolonged Stand. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ag Puteh, Awang Faruq Haqeemy (2017) Experimental Study On The Dependency Of The Lithium-Ion Battery And Temperature Using Chi-Square Independent Test. Project Report. UTeM, Melaka. (Submitted)

Ahmad, Azharudin (2017) Optimization Of RTCS Main Frame By Using Numerical Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Madiha Husna (2017) Optimization Of Friction Stir Welding Parameter On Aluminium 5052 Alloy By Using Taguchi Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Dugel, Muhamad Sufian (2017) Implementation Of Safety Divider Downhill Road With The Transmutation Concept. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Khairi, Muhammad Syahmi (2017) The Development Of Semiautomatic Vertical Ladder For Domestic Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Nahran, Luqman El Hakim (2017) Experimental Investigation On Energy Absorption Capacity Of Mild Steel Cone Subjected To Axial Crushing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aman, Mohd Azizi (2017) Design And Optimize The Interior Design And Furniture Mechanism Of Modular Unit Of Food Truck. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ami, Amir Ashraf (2017) Development Of Equipment For Loosen And Tighten Of Lug NUTS By Using Gear Concepts (Special Lug Wrench Tool). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Hussein, Mohd Hanafiah (2017) Industry Monitoring Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amit, Auzai (2017) Design Of Electronic Fuel Injector Tester For Educational Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amran, Mohamad Affendi (2017) Development Of Uninterruptible Power Supply Using Variable Voltage Regulator For Low Power Devices. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amran, Muhammad Aimman (2017) Design And Development Of Car Alarm System Using SMS Based. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariffin, Nur Amelia (2017) Development Of Small Energy Generation From Vehicle Movement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Asir, Nor Farhana (2017) Thumbprint Automatic Attendance System & Door Access By Using GSM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Asri, Muhamad Zhariff (2017) Development Of Elementary School Drone Kit Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang, Nurul Nadiah (2017) Investigation Of Friction Characteristics Of SAE 15 W40 Conventional Engine Oil With Nano Additive. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang Zawawi, Dayang Ezzatul (2017) Bandwidth Enhancement Of Multiband Microstrip Patch Antenna For Wimax Application. Project Report. UTeM, Melaka. (Submitted)

Ayeob, Mohd Azizi (2017) Comparison DC And AC Of Inclined Plane Test (IPT) For Tracking And Erosion Of Insulating Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azlan, Muhammad Fitri Aiman (2017) Investigation On Tool Paths Programming Strategies Using CATIA V5 To Fabricate Biomedical Application On Simultaneous Five-Axis CNC Milling Machine. Project Report. UTeM, Melaka. (Submitted)

Azli, Muhammad Asyraf (2017) Numerical Solution Of Nanofluids Flow And Heat Transfer Over A Moving Surface With Thermal Radiation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Mohd Arshad (2017) Development Of An Electronic Board That Identify And Check The Functionality Of The Commonly Used Arduino's Component (Assorted Component Checker). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Muhammad Faiz (2017) The Influence Of Refrigerant Charging For Non-Ducted Split Unit 1 Horsepower Air Conditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

B. Mohd Saipudin, Muhammad Afiq (2017) Soil Condition Sensor Development And Wireless Monitoring Using ESPresso. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Basrey, Zafirah (2017) Bandwidth Enhancement Of Reconfigurable Planar Inverted-F Antenna (PIFA) For GPS Band Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Beh, Eik Zhen (2017) Introductory Of Dimple To Ahmed Body Top Surface As A Drag Reduction Device By Using DoE Appraoches. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

C. Chemban, Swarna Latha (2017) Implantable In Body Antenna Design At Medical Implant Communication Service Band For Telemedicine Application. Project Report. UTeM, Melaka. (Submitted)

Chai, Agatha Yan Hong (2017) Improving Inventory Management Using Open Source Software Enterprise Resource Planning (OSS/ERP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Jing Ting (2017) Improving Densification Of Alumina-Based Ceramic For Cutting Tool By Using Different Sintering Profiles. Project Report. UTeM, Melaka. (Submitted)

Chandi, Mohd Afiq (2017) Electronic Walking Stick For Visual Impaired. Project Report. UTeM, Melaka. (Submitted)

Chang, Chia Wen (2017) Improving Production Planning Using Open Source Material Requirements Planning (OSS/MRP) Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Charlseak, Charisa (2017) Design, Analysis And Development Of Frame, Body And Mechatronic System For A Tennis Court Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Arbaei, Nur Adlin (2017) Ergonomic Risk Factor That Contribute To Discomfort And Vibration Analysis While Riding Train. Project Report. UTeM, Melaka. (Submitted)

Chea, Kah Mun (2017) Design Of High Viscosity Batter Dispensing System To Enhance The Productivity Of Kuih Bahulu. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Cheah, Dow Sheng (2017) Effect Of Different Thickness Of Chrome Spray On The Exhaust Pipes. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chee, Yik Pei (2017) Implementation Of Information, Decision And Action (IDA) Method In Overall Equipment Effectiveness (OEE) To Improve Manufacturing Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng, Ngee Siong (2017) Optimisation Of The Mechanical Properties Of The Engineering Plastics Via Optimal Processing Parameters Using Taguchi Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew, Yi Ching (2017) Development Of UTeM Bus Tracking System Using GSM And GPS Modules. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chin, Zhen Yan (2017) Development Of Automatic Air Humidity And Temperature Controller With Purifying Function Controlled By Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Wen Kan (2017) Design Of A Low Viscosity Batter Dispensing System To Improve The Productivity Of Kuih Rempeyek. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Christopher, Christer Ruben (2017) Design And Development Of A Novel Water Distiller Using Fresnel Lens. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dasuky, Fatin Noor Afifah Afif (2017) Analysis Of Doppler Effect In LTE By Using MATLAB. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Doraisingam, Sankiran Dharma (2017) Fiber Optic Sensor Development On Liquid Cetirizine Detection For Pharmaceutical Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Elain, Elweelee (2017) Analysis Of The Factor Affecting The Consumption Of Energy And Energy Trends In Factory 2 FTK,Using Statistical Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Esmom, Ezlin Nur Aina (2017) Development Of Pigeon Hole Box System Using IoT For University Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Evelyn, Usun Kasing (2017) Design And Development Of Solar Powered Smart Dustbin For Domestic Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Gan, Chong Chun (2017) Design And Development Of Single Phase 3-Level Cascaded H-Bridge Multilevel Inverter Using Sinusoidal Pulse Width Modulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ghulam Shabir, Muhammad Syazwan (2017) Development Drill Press Stand For Portable Electric Drill. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Say Kheat (2017) Study Of Cold Room Performance Analysis (Temperature And Air Flow Distribution) In An Application Laboratory (Laboratory Equipment). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafiz, Nur Afifa (2017) Design And Development Of Testing Rig For Resemblance Of Tidal Phenomena Using Solidthinking. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hairuddin, Norfazlyana (2017) Simulation Design On Power Trip Prevention Switching Circuit For Domestic Fix Demand. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hairus Saleh, Riduan (2017) Optimization Parameter And Mechanical Properties For Aluminium 5052-H32 By Multi-Passes Butt Joint Using Friction Stir Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halim, Nurhafizah (2017) A Study Of Fabrication Costs Of Testing Rig For River Trash Collector System With The Application Of Solid Thinking Inspire. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halim, Nurul Wahida (2017) Development Of Rubber Track Wheelchair Using Arduino Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamedan, Norsyazura Aiza (2017) Investigation Of The Capability Of Local Palm Oil Infused With Nanoparticle As A New Additive For Lube Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasbullah, Mohamad Faisal Zulfaqqar (2017) Development Of Portable Power Generation System With Low Cost Vertical Axis Wind Turbine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hashim, Ahmad Hariz (2017) Development Of An Automated Garden Irrigation System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hashim, Mohamad Husaini (2017) Reducing Air Press Turbulence By CFD Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassan, Muhammad Shahirman (2017) Investigation On The Performance Mild Steel Impact Test Vibrational Analysis Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hong, Zhi Xuan (2017) The Planning Of Handover In 5g Technology. Project Report. UTeM, Melaka. (Submitted)

Hussain, Nadia (2017) Preliminary Study Of Mechanical Properties For Composite Reinforce Pineapple Leaf Fibre Through Impact Tensile And Torsion Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Isa, Nur Afiffa (2017) A Fiber Optic Sensor On Alkaline Level Detection Using Beam-Through Technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Mohammad Hanif (2017) Development Of Automatic Trip Monitoring System In Distribution Box Using Global System For Mobile Communication (GSM). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Mohd Nor (2017) Temperature And Humidity Effect On Corrosion And Mechanical Properties Of Fences And Gates. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Nurfarah Izzati (2017) Development Of Crack On Composite Detection Sensor Using Magnetic Induction Concept. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izahar, Adam (2017) Water Quality Sensor Development And Wireless Monitoring Using Arduino. Project Report. UTeM, Melaka. (Submitted)

Jalil, Muhamad Suhaimi (2017) Development Of Portable Magnetic Clamping. Project Report. UTeM, Melaka. (Submitted)

Jallil, Nurul Amirah (2017) Design Of A Corner Chair To Ease The Daily Routine Of Cerebral Palsy Kids. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamel, Muhammad Shazni (2017) The Development Of Prototype Of Automatic Windshield Wiper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamil, Nur Zahira (2017) Implementation Of Digital Filter For Pre Processing Of Lightning Detection And Monitoring System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Johar, Hafizuddin (2017) Design And Development Of A Smart Home Power Monitoring System For Energy Awareness Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Johari, Mohd Nur Fitri (2017) Study For The Effect Of Blowing Direction On Heat Transfer Of Cooling Tube By CFD Simulation And Experimental Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Johari, Muhamad Hatim (2017) Development Of The Detection Motorcycle Location Using GPS And GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juwahir, Eiddi Noor Azizi (2017) Experimental Investigation On Mechanical Properties Effect For New Composition Of Epoxy Resin Reinforced Kenaf Fiber Through Torsion And Impact Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamar, Nurul Zarifah (2017) Tribological Study Using Pin-On-Disc For Polypropylene At Different Carbon Fibers Filler Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamaruddin, Nurain (2017) Delmia Ergonomics Analysis On Wheelbarrow To Improve Ergonomics Factor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamarudin, Ain Nurkamilia (2017) Study And Development On Pattern Classification System For Empty Fruit Bunch Based On The Age Profile Of Oil Palm (Elaeis Guineeniss) Trees. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarul Zaman, Mohamad Fahhim (2017) Development Of Humidity Controller Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kek, Zi Xiangg (2017) Improving Stock Record Accuracy Using Mobile Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khozari, Nur Jannah (2017) Morphological Study Using Optical Microscope Of Natural Rubber With Modified Tapioca Starch After Soil Burial Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koh, Jian Yang (2017) Experimental Evaluation Of Multifunctional Variable Refrigerant Flow (VRF) System In An Application Laboratory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kong, Ching Yee (2017) Design Of Cooling System For Two Plate Mould. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Chai Fen (2017) Propose Of Suitable System To Improve The Dust Collector System In Trim Booth CTRM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, De Rong (2017) The Design And Development Of Temperature Controlled Oyster Mushroom Farmhouse Using PID Control Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Hooi Fong (2017) Accuracy Study Of Impeller On Five-Axis And Nine-Axis Machine By Using Powermill And CATIA. Project Report. UTeM, Melaka. (Submitted)

Lee, Man Ching (2017) Development Of Smart Lighting System For Dolby Cinema Using Bluetooth Application. Project Report. UTeM, Melaka. (Submitted)

Leow, Li Ying (2017) Manufacturing Productivity Improvement In Clothing Industry Using Toyota Sewing System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lieong, Chun Yin (2017) Development Of Smart Home Automation System Using Wi-Fi. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Liew, Chin Chin (2017) Effect Of Hard And Soft Segment Ratio To Vibration Damping Properties Of Polyurethane. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Kai Yan (2017) The Development Of Active Buoy Charging Station For Remotely Operated Underwater Vehicle (ROV) Using Solar Power. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Hui Yee (2017) Development Of An Automatic Can Crusher Using Programmable Logic Controller At FTK Canteen. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Angeline Wan Jing (2017) Brain-Machine Interface Device For Amyotrophic Lateral Sclerosis (ALS) Disease Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lok, Soo Kee (2017) Accuracy Study Of Car Rim On Five-Axis Simultaneous Milling And Nine-Axis Turn-Mill Machine By Using CATIA V5. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Luah, Chii Hao (2017) Blade-Generator Structure Analysis And Topology Optimization Of Savonius Vertical Axis Wind Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M. Balakirisnan, Shawn Shivaneson (2017) Investigation Of Mobile Network Coverage Performance In UTeM’s Technology Campus Using Coverage Profiling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mageswaran, Renugah (2017) Development Of Water Resistant Particleboards From Rice Husk. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mahadi, Mohamad Farid (2017) Comparison Study Between HSC 70 With DMU 60 EVO Using Powermill Software On Simultaneous 5-Axis Machining Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahayuddin, Zahid Nasrullah (2017) Development Of Cascaded H-Bridge Multilevel Inverter Based On PWM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mahzan, Irna Nadira (2017) Development Of FPGA Based Portable Low-Cost Digital Signal Generator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mansor, Masrina (2017) Development Of Milk Dispenser Using Arduino Microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mansor, Nur Atiqah (2017) Deveploment Of Brake Oil Monitoring System Tool Using Application Of Fiber Optic Liquid Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marzukhe, Ida Nurfarhana (2017) Ergonomic Environment Using Subjective Method Regarding Discomfort And Risk Analysis For Prolonged Standing At KTM Komuter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Ariffin, Nuramalina (2017) A Study On Ergonomic Environment Factor And Inertia That Contribute To Discomfort Inside Train. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Dewi, Muhammad Ainol Hafiz (2017) Development Of Attendance System For Student Using Bluetooth Device Connection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Jahari, Nur Farrahim (2017) Optimization Of Fiber Optic Sensor In Detecting The Condition Of Sunflower Oil For Food Industry Usage By Using Factorial Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazalan, Muhammad Danial Farhan (2017) Optimization Of Tensile Strength Via Optimal Processing Parameter For High Density Polyethylene (HDPE) Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazelan, Muhammad ‘Azim Saniy (2017) Design And Development Of Portable U-Turn Signal System For Motor Vehicle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mazlan, Ikhwan Fakhrulhaziq (2017) Effect Of Different Welding Parameters To The Mechanical Properties Of Spot Weld. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Muhammad Hazim (2017) Design, Analysis And Fabricate The Prototype Of Food Truck Body. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Muhd Uzi Migzuan (2017) Development Of Shuttlecock Launcher With Dual Mode Trajectory System For Badminton Training Purpose. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Akhir, Noor Liyana (2017) Development Of Automatic Meal Dispenser For Pet Dietary Via Internet Of Things (IoT). Project Report. UTeM, Melaka. (Submitted)

Md Ali, Mohamad Fariq Azzad (2017) Improvement In Efficiency Of Water Floating Nano Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Ilias, Omar Dani (2017) Design And Fabricate A Prototype Of Fire Safety Window Grille For Residential Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Osman Ani, Mohamad Taufiq (2017) Improvement Of 12 Meter Catamaran Boat Hull Design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Sallehan, Muhammad Syafi (2017) Comparison Of Different Organo Zinc Compound As Tribological Properties Improver In Palm Oil Based Bio-Lubricant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Asri, Hairil Hashimie (2017) Development Of Face Detection And Recognition In Home Security Using Surf Feature. Project Report. UTeM, Melaka. (Submitted)

Mohamad Husni Alhadi, Mohamad Hamiroel Nazrin (2017) Designing Data Logger For RTU System In Distribution Automation System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Noor, Mohamad Azrin (2017) Energy Harvesting From Asphalt Pavement Roadways Vehicle-Induced Stresses For Street Lighting. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Nor, Dalila Basirah (2017) Prediction On The Reliability Of Glove Dipping Machine Using Weibull Distribution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Saleh, Muhamad Ridhwan (2017) The Design Of The Agriculture Smart Mover Bodywork Structure Using Total Design Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shaferudin, Atiqah (2017) Assessment Of Renewable Energy Effect Of Grid Transient Stability In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed, Amir Syahir (2017) Development Of Smart Baby Cradle By Using PIC16PF877A Controller. Project Report. UTeM, Melaka. (Submitted)

Mohamed Aripin, Muhammad Nawi (2017) Fabrication Of Suspension System For The Palm Oil Plantation Agriculture Smart Mover Through Experimental And Numerical Prediction. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohammad Rosli, Muhammad Hafizi (2017) Correlation Between Surface Roughness And Dust Build-Up In Fabric Duct And Galvanized Steel Duct : A Comparison. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Sukeri, Ahmad Nurfaidhi Sadiq (2017) Design Optimisation Of Car Jack System For An Emergency Usage Using PDS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Zamzuri, Noor Adilah Yasmin (2017) Tolerance Stack Analysis Using Tolcap Software For River Trash Collector System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amer, Muhammad Syahrul Nezar (2017) DOE Approach In Determination Of The Optimum Welding Parameters For Three Layer Spot Weld. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Anuar, Intan Munirah (2017) Development Of An Automatic Irrigation Sprinkler System For Corn Farm Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azemi, Muhammad Naqiuddin (2017) Investigation On The Performance Stainless Steel Impact Test Vibrational Analysis Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azman, Abdullah Haziq (2017) Feasability Study Of Using Vegetable Oil As A Cutting Lubricant On Conventional Lathe Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azmi, Siti Haidar Atiah (2017) Optimisation And Analysation Of Linear Positioning Table For Drilling Machine. Project Report. UTeM, Melaka. (Submitted)

Mohd Fauzi, Mohamad Firdaus (2017) To Study The Concept Of Perpetual Motion On Table Fan By Using Permanent Magnet. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Fozi, Airini An Nadrah (2017) Automated Guided Vehicle (AGV) System Based On Simultaneous Localization And Mapping (SLAM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fozi, Nur Aliaa Fazlin (2017) Development Of Automatic Water Replacement Aquarium With Fish Feeder Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Hassan, Farahin (2017) Study Of Fiber Orientation Effect On Mechanical Properties Of Banana Pseudostem Fiber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Jaffri, Siti Julia Zulaika (2017) Design And Development Of Energy Harvester Device For The Application In Domestic Pipeline. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kamil, Ahmad Ridhwan (2017) Development Of An Autonomous Robot For Inspection System Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Latfi, Marwan Shafiq (2017) Design And Development Of Pineapple Leaf Cutter (PLC) Device In Pineapple Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nizam, Nurfarihah Natasha (2017) A Fiber Optic Sensor On Acidic Level Detection Using Beam-Through Technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Noor, Muhammad Firdaus (2017) Improvement Of Buoyancy For 12 Meter Double Hull Boat Using Virtual Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ramli, Nur Arif (2017) Development Of Semi-Automatic System For Underwater Remote Operated Vehicle (ROV) By Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridzuan, Nur Haslinda (2017) An Analysis Of Harmonics Contribution Of Variable Frequency Drive In Power Distribution System. Project Report. UTeM, Melaka. (Submitted)

Mohd Rodzi, Haziqahtulsyahirah (2017) An Investigation Of Power Quality Issue In Campus Technology, UTeM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Rosdi, Nur Hidayah (2017) Optimization Of Fiber Optic Sensor In Detecting The Condition Of Corn Oil For Daily Usage Of Healthy Diet By Using Factorial Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sahet, Muhammad Afnan (2017) Development Of Rice Cleaner By Using Arduino Control. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Saib, Khairul Anwar (2017) Design And Development Of Packaging Machine For Liquid Soap. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Supinar, Mohd Habib (2017) Harvesting Of Waste Energy From 1.0 HP Air Conditioner In Production Of Free Hot Water. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Tarmizi, Muhammad Syafiq (2017) Design And Development Of Portable Pineapple Leaf Fibre Machnice In Pineapple Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zahid, Muhammad Nur Akif (2017) Development Of Intruders And Fire Alert At House Using GSM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zain, Mohd Amer Fazriel (2017) Prototype Of Water-Cooled Condenser Cooling System For Split Unit Air-Conditioner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaini, Norsolleha (2017) Investigation Of Wear Behaviour By Different Nanoparticles In Conventional Oil On The Ball Bearing Tested Using Extreme Pressure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zakaria, Muhammad Farhan Zuhaili (2017) Development Of An Educational Quiz Kit That Test Student Knowledge On Control System's Second Order Transient Response By Using DC Motor Speed Control As Application (Transient Response Quiz Box). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zali, Muhammad Fahmie Izuddin (2017) Potential Study And A Development Of Hybrid Solar Pico Hydro Power Harvesting For Urban And Rural Area. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zamani, Mohd Ziaulhadi (2017) Aerodynamic Effect Of Overhang On Turbulent Flow Field Within Two Dimensional Street Canyon. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zin, Mohammad Taufik (2017) Parametric Study On Hydronic Wall Cooling System Using Domestic Pipe As A Radiant System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulkarnain, Fatin Syazana (2017) Design And Analysis For Development Of Bicycle Helmet Moulding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Ali, Luqmannurhakiem (2017) Investigation On Thermal Resistance Property Of Natural Hybridization Fibers (Oil Palm & Coconut) Through Conduction Concept Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Shuhada, Muhammad Khusyairi (2017) Development Of New Clamping Method For Waterjet Machine. Project Report. UTeM, Melaka. (Submitted)

Mohmad Bakhari, Muhammad Ashraf Wajdi (2017) Development Of Road Power Generation By Applying The Conversion System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mooruthy, Ruban (2017) Design And Fabrication Of Automobile Blind Spot Detection System Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad, Fatin Nasuha (2017) Automatic Plant Management System For Horticulture Using Android. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhamad Fadilah, Aqilah (2017) Development Of Cleaning Whiteboard System Using Programmable Logic Control (PLC). Project Report. UTeM, Melaka. (Submitted)

Muhammad Hanafiah, Muhammad Hazimi (2017) Design Of Car Fuel Lid Cover Breaker For Safety Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Mahayudin, Nurrul Hikmah (2017) Modelling And Validation Of Ride Model For Utility Truck. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Musa, Mohamad Dzumalin Faisal (2017) Performance Analysis Of Brass Sheet Under Vibration Impact Test By Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustapa, Nur Amalia (2017) Development Of Portable Automatic Scoreboard For Sport Tournament Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustapai, Munirahasmaa (2017) Optimization Of Fiber Optic Sensor In Detecting The Condition Of Palm Oil For SME Industry Usage By Using Factorial Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasarudin, Faizun (2017) Improving Manufacturing Process Through Lean Implementation In Small Scale Manufacturing Workshop. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasrudin, Nur Fatihah (2017) The Optimization Of Welding Parameter For Joining Mild Steel 1020 Using ABB Metal Inerts Gas (MIG) Robot Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nawawi, Mohamad Zainul Hakim (2017) Evaluation Of Sugarcane Bagasse As A Raw Material For Desalination. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazar Shah, Noramin (2017) Comparison Study Of 5 Axis Machine With Different Configuration Using CATIA Software. Project Report. UTeM, Melaka. (Submitted)

Nazari, Mohd Faiz (2017) Design,Analysis And Development Oil Palm Loose Fruits Collector Device. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nazri, Syarifuddin (2017) Development Of Monitoring System In OPerating Theater Using Arduino Ethernet Shield. Project Report. UTeM, Melaka. (Submitted)

Nazri, Syarifuddin (2017) Development Of Monitoring System In Operating Theater Using Arduino Ethernet Shield. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Liaw Yong (2017) Development Of Small Volume Watering & Soil Cooling System By Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Simpson (2017) Development Of Remotely Operated Trash Cleaning Robot For River Cleaning Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ngan, Choon Wang (2017) Soft Starter Design For Single Phase AC Motor Using Microcontroller – Based Phase Angle Control. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nik Azami, Nik Nazihah (2017) Development Of Assisted Global Navigation Satellite System (A-GNSS) Vehicle Tracking System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Noor Azman, Muhammad Akmal (2017) Development Of Fiber Optic Liquid Sensor On Liquid Paracetamol Concentration Detection For Pharmaceutical Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Zamri, Nur Ridha Rifaie (2017) Simulation Of Sprocket By Using Different Tool Paths Process In CAD/CAM Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norfadzlon, Mohd Farid Hakim (2017) Design And Development Of Yamaha Y15ZR Frame Slider (Carbon Steel). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhan, Mohamad Zul Hafiq (2017) Development Of Diode Clamped Multilevel Inverter Base On PWM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Oh, Zi Xin (2017) Development Of Emergency Wireless Communication System By Using GSM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Omar, Abdullah (2017) A Study To Design And Fabricate A Prototype Of Driver Drowsiness Preventer (DDP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Omar, Mohammad Zulkurnain (2017) E-Logic Trainer Kit : Development Of An Electronic Educational Simulator And Quiz Kit For Logic Gate Combinational Circuit By Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Omar, Muhammad Faidhllah (2017) Fabricate The Body Of The Agriculture Smart Mover. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Omar, Nurul Shafiqah (2017) Performance Analysis Of Oil Skimmer For Grease Trap System To Shorten The Retention Time. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Omar, Zulfahmi (2017) Development Of A Prototype Of Portable 5V Battery Charging System Using Wind Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Ee Wong (2017) Development Of Sorting System Based On Colour Segregation Using Programmable Logic Controller (PLC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Qiao Yuan (2017) Design, Optimization And Development Of Phyllotaxis Pattern Solar Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Onn, Azizi Arif (2017) Optimization And Analyze Of Fixable Clamping Jig For Milling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Othman, Aimanezmir (2017) Optimization On The Nanoparticle Stability In Liquid Phased Condition By Using Taguchi Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Otsman, Muhammad (2017) Tribological Properties Modification Of Zinc Diprimary Octyl Induced Palm Oil Bio-Lubricant Using Molybdenum Dithiophosphate. Project Report. UTeM, Melaka. (Submitted)

Pan, Carol Zi Ting (2017) Propose New Dust Suction System To Solve The Malfunctioning Of Existing System In The Trim Booth At Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Puvanen Thiran, Logantiraan (2017) Improvement Of Diamond Antenna Dish Based On Comparison Method Between Scanning Part, Actual CAD Data And Fabrication Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rafi'i, Nurul Atiqah (2017) Analysis On The Effect Of Inter-Cell Interefence In LTE By Using Matlab. Project Report. UTeM, Melaka. (Submitted)

Rahim, Masitah (2017) Effect Of Palm Oil Trunk Dust To Polyurethane Noise Reduction Properties. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rahim, Norhuzaifi (2017) Experimental Investigation Of Energy Absorption Capacity Of Mild Steel Cylinder Subjected To Axial Crushing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rahiman, Nur'Ain (2017) Design And Development Of Pineapple Leaf Fibre Extraction Machine. Project Report. UTeM, Melaka. (Submitted)

Ramalingam, Thineskumar (2017) Investigation Of Energy Absorption Capacity Of Mild Steel Cylinder Subjected To Lateral Crushing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramat, Muhammad Fikri (2017) Development Of Automatic Body Cleaning System For Pet Via Internet Of Things (IoT). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ramlan, Muhammad Saifulazwan (2017) Study On Desalination Of Seawater By Water Hyacinth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramli, Ahmad Syukran (2017) Effect Of Water Mist In Spark Ignition Engine Toward Exhaust Gas Emission. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramsah, Mohammad Zulfadhli (2017) Develop And Design Portable Mini Turbine And Solar Source for Outdoor Usage. Project Report. UTeM, Melaka. (Submitted)

Razlan, Anmar Sarhan (2017) Field Oriented Control Of Five-Phase Induction Motor Speed Drive Using DSpace And Matlab/Simulink. Project Report. UTeM, Melaka. (Submitted)

Revindran, Sathiyasuruban (2017) Development Of Stand-Alone Solar System For Under-Development Area. Project Report. UTeM, Melaka. (Submitted)

Rizalman, Nur Farhana Intan Suhaila (2017) Development Of Foreign Material In Food Detection Sensor Using Resistance Concept. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rollan Afendy, Zahin Wazini (2017) Solar Hybrid Power System Model Using Arduino With A Smart Control And Monitoring System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosdani, Nurul Fatin (2017) Microcontroller-Based Voltage And Current Stability Controller For Domestic Application. Project Report. UTeM, Melaka. (Submitted)

Rosli, Muhammad Akmal (2017) Development Of Unmanned Aerial Vehicle (Portable Version). Project Report. UTeM, Melaka. (Submitted)

Rosli, Muhammad Tirmidzi Al Bakri (2017) Design, Analysis And Development Of Tennis Court Dryer Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Siti Najihah (2017) Tensile Behavior Study Of Polypropylene At Different ASH Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosly, Muhammad Safwan (2017) Blending Of ZDDP And MoDTP Into Corn Oil As Tribological Properties Improvers. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosman, Muhammad Qamarul Arifin (2017) Development Of Automatic Fire Extinguisher System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosmi, Nur Shahira (2017) The Development Of Automatic Switch Using Microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rozman, Amirul Dzakiyy (2017) Design Of Electrical Circuit Of Electronic Fuel Injector Tester For Education Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rusli, Ahmad Adib (2017) Development Of Coin Collector Notification System Using GSM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rusli, Nur Alia (2017) Assessment On The Impact Of Distributed Generation (Renewable Energy) Penetration To The National Grid Protection System Performance Using Eracs Software. Project Report. UTeM, Melaka. (Submitted)

Rusni, Muhammad Firdaus (2017) The Development Of Power Generation Roof Ventilator For Emergency Light. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

S.Chinniah, Eswaran (2017) Comparative Study Between 3D Scanner,Vernier Calliper,And Coordinate Measurement Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Saharuddin, Muhammad Zariq Izwan (2017) Developing Recycling Machine For Botlle Plastic With Reward By Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samsudin, Khairul Ikhwan (2017) Automatic Vehicle Recognition Using Morphological And Template Matching Technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Samsudin, Muhammad Izzat (2017) Fabrication Of Braking System For The Palm Oil Plantation Agriculture Smart Mover Through Analytical Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sani, Muhammad Nurshahmin (2017) Design And Development Of Vertical Axis Wind Turbine For Electrical Power Generation Specific Use In Malaysia. Project Report. UTeM, Melaka. (Submitted)

Saparuddin, Hasan (2017) Effect Of Spot Weld Tip To The Welding Characteristic Of Dissimilar Resistance Spot Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sapingai, Mohamad Azywan (2017) Development Of Auto Log Sheet Switch For Energy Management. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Saruji, Nur Safweda (2017) Elevator Door Mechanism Control System Improvement Using Arduino Uno. Project Report. UTeM, Melaka, Malaysia. (Submitted)

See, Toh Chun Sing (2017) Development Of Remotely Operated Underwater Crawler Robot For Underwater Inspection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Selamat, Siti Khotijah (2017) Development Of Solar Tracker Using Microcontroller To Control Stepper Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shaari Omar, Mohamad Shukri Faiz (2017) Modelling And Validation Of Ride Model Commercial Vehicle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shahli, Nur Amalina (2017) Development Of Alert Notification Of Indoor Air Quality Level Using GSM System. Project Report. UTeM, Melaka. (Submitted)

Shamsuddin, Nurul Shahira (2017) Surface Integrity Of Tool Steel AISI D2 Produced By Dry CNC Turning. Project Report. UTeM, Melaka. (Submitted)

Shamsuri, Muhammad Hamizan (2017) Development Of Smart Temperature Monitoring System Using Ubidots. Project Report. UTeM, Melaka. (Submitted)

Shamsuri, Nurizrin Shazmira (2017) A Diagnostic Of Harmonic Source Signature Recognition In Power Distribution System By Using Periodogram. Project Report. UTeM, Melaka. (Submitted)

Shamsusah, Haqeem Shah Firdaus (2017) Assessment On Indoor Air Quality Analysis In Portable Cabin And Traditional Building Classroom. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shapri, Siti Nur Shahira (2017) Development Of Wearable Miniaturized Antenna For WLAN Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shukri, Izzah Atirah (2017) Development Of Microstrip Solar-Patch Antenna For Wireless Radio Communications. Project Report. UTeM, Melaka. (Submitted)

Subramaniam, Arvind Veloo (2017) Design And Develop Manually Operated Machine For The Preparation Of Plastering Mortars By Using Waste Papers. Project Report. UTeM, Melaka. (Submitted)

Sudirman, Dina Zulaikha (2017) Development Of Vision-Based System For Product Classification. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sukri, Syazwan (2017) Development Of Volatile Organic Compounds (VOC) Removal Filter Prototype For Transport Air Conditioner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Mohd Fadzil, Sharifah Nurul Jannah (2017) Development Of Electronic Component Rack System By Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tallip, Juriyanna (2017) Optimization Of Tribological Performance For Filtration Waste Cooking Oil Enhance By Nanoparticles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Mei Lyne (2017) Development Of Water Level Of Wastewater Treatment Plant Monitoring System By Using PLC With HMI Features. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Ren Jie (2017) Performance Analysis Of 1HP Split Type Room Air Conditioner Using Refrigerant R410A And R32. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Yi Lin (2017) Development Of A Wearable Ankle Rehabilitation Device For Patient With Calf Muscles Flexibility Problems By Using Arduino Uno. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Zi Hao (2017) Examination Of Buckling Behaviour Of Axially Compressed Cylinder With Uneven Length. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tang, Hong Kwong (2017) Performance And Energy Analysis For Hybrid Evaporative Chiller System Controlled By Chilled Water Temperature By Heater. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tariq, Muhammad Akmal Dodgson (2017) Development Of Household Power Trip Monitoring Devices Utilizing Global System For Mobile Communication (GSM). Project Report. UTeM, Melaka. (Submitted)

Teo, Huei Boon (2017) Modification Of Headlight Intensity Control Based On Distance By Using Bluetooth. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Teo, Phaik Yuan (2017) Optimisation Of Poka-Yoke Concept To Develop A Prism Jig Assembly For Semiconductor Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Thankadurai, Raaja Panndiyan (2017) Design & Development Of Oil Disposal System For Grease Trap Using PUGH Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tung, Chia Seng (2017) Development Of A GUI For Automatic Eye Tracking For Post Data Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Veeran, Sassinananthan (2017) Surface Mounted On Body Antenna Design At Medical Implant Communication Service Band For Tele-Medicine Application. Project Report. UTeM, Melaka. (Submitted)

Wan Hussin, Wan Hiqmal Hisyam (2017) Flexural Behaviour Study Of Polypropylene At Different Ash Filler Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mohammed Azmi, Ainnur Marshitah (2017) Development Of Fall Detector Using Arduino Through GSM For Health Care Use. Project Report. UTeM, Melaka. (Submitted)

Wan Zaidi, Aiman Izzati (2017) Improving The Densification Of Alumina Based Ceramics For Cutting Tool Using Binder Agent. Project Report. UTeM, Melaka. (Submitted)

Wang, Sheng Hue (2017) Investigation Of The Buckling Behavior Of Axially Compressed Truncated Cone With Uneven Length. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wee, Wei Huat (2017) Design, Analysis And Development Of Tennis Ball Launcher For A Tennis Court Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Yew Moon (2017) Development Of The Unmanned Aerial Vehicle In Hexacopter For Attitude Control. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Woon, Chee Hong (2017) Classification Of Normal People And People With Parkinson's Disease Based On Speech Signals Using Simulation Of MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Woong, Meng Fai (2017) Development Of Motorcycle Security System Using RFID And GSM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yahya, Muhammad Hilmi (2017) Determination Of Lightning Distance From Thunder And Radiation Electric Field. Project Report. UTeM, Melaka. (Submitted)

Yew, Peter Kwong Yong (2017) Design And Development Of Shield For Fire Resistance Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusoff, Ahammad Sadiq (2017) Development Of Indoor Air Quality (IAQ) Display Unit Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zahar, Mohamad Yusri (2017) Analysis Frequent Failures In Electrostatic Precipitator To Measure Efficiency At Coal-Fired Power Plant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zaidi, Maryam Nabihah (2017) Power Factor Improvement Using Automatic Power Factor Compensation (APFC) Device For Medical Industries In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zaimi, Nik Muhamad Firdaus (2017) Development Of An Electronic Educational Quiz Kit That Test Student Knowledge On Translating Timing Diagram To The PLC Ladder Diagram. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal, Nor Izhani (2017) Development Of Remote Terminal Unit (RTU) For Power Quality Monitoring System. Project Report. UTeM, Melaka. (Submitted)

Zainal Abidin, Muhamad Aqil (2017) Finite Element Analysis Of Oblique Impact On Composite Bicycle Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainin, Nur Syafiqa (2017) Fiber Optic Sensor For Different Concentrations Detection Of Honey. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainudin, Robiatul Aqirah (2017) Development Of Casing And Ventilation System In 3D Printer, Prusa 13 By Using Integrated Approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zakaria, Nur Shahirah (2017) Development Of Crosswind Detection For Direction And Speed Monitoring System At Highway Using Android APP. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkifli, Nur Atikah (2017) A Harmonic Detection Of Rectifier Load In Power Distribution System. Project Report. UTeM, Melaka. (Submitted)

This list was generated on Mon Oct 14 21:15:13 2019 MYT.