Browse By Repository:

 
 
 
   

Items where Subject is "T Technology > TL Motor vehicles. Aeronautics. Astronautics"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type
Jump to: | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | W | Y | Z
Number of items at this level: 728.

Hannan, MA and Azidin, FA and Mohamed, Azah (2012) Multi-sources model and control algorithm of an energy management system. Energy Conversion and Management. pp. 123-130. ISSN 0196-8904

Mohamad Faiz, Mohd Yusop (2015) Design And Analysis Of Low Cost Motorcycle Shock Absorber Test Rig Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Suhaimi, Samsudin (2015) Development Of Multibody Dynamics (MBD) Method For UTeM FV Malaysia Racing Car Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zaid Fikri, Md Salleh (2015) Design And Development Functional Prototyping Formula SAE Knuckle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A

ABDULLAH, Mohd Azman and Mansor, Muhd Ridzuan and Mohd Tahir, Musthafah and Abdul Kudus, Syahibudil Ikhwan and Hassan, Muhammad Zahir and Ngadiman, Mad Nasir (2013) Design, Analysis and Fabrication of Chassis Frame for UTeM Formula VarsityTM Race Car. International Journal of Mining, Metallurgy and Mechanical Engineering (IJMMME), 1 (1). pp. 75-77. ISSN 2320 –4060

ABDULLAH, Mohd Azman and Mansor, Muhd Ridzuan and Tamaldin, Noreffendy and Thanaraj, Krishnan (2013) Development of Formula Varsity Race Car Chassis. IOP Conf. Series: Materials Science and Engineering, 50 (012001). pp. 1-11. ISSN 1757-899X

ABDULLAH, Mohd Azman and Tamaldin, Noreffendy and Rusnandi, Herdy and Manoharan, Tayalan and Samsir, Muhammad Afiq (2013) Development and Modification of a Single Overhead Camshaft 4-Valve 4-Stroke 135 cc Formula Varsity Race Car Engine. IOP SCIENCE IOP Conf.Series:MaterialsScienceandEngineering, 50. pp. 1-7. ISSN 1757-899X

ABDULLAH, Mohd Azman and MICHITSUJI, Yohei and Takehara, Shoichiro and NAGAI, Masao and Miyajima, Naoki (2010) SWING-UP CONTROL OF MASS BODY INTERLINKED FLEXIBLE TETHER. T H E A R C H I V E O F M E C H A N I C A L E N G I N E E R I N G. pp. 115-131. ISSN 2300-1985

Ab. Hakim, Ab. Halim (2009) Kajian Tentang “Menambahbaikan Sistem Brek Letak Kereta Elektrik Untuk Kereta Penumpang”. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Aleff Nazriem, Abd Khadir (2015) Development Of Air Flow Sensor System To Monitor The Effectiveness Of Air Filter For 1000 Litre And 660 Litre Car Engine Capacity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Ghaffri, Abd Halim (2008) Permodelan Dan Analisis Pelanggaran Kereta. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Sukor, Siti Marsyidah (2016) The Comparison Study Of Handgrip Pressure On Steering Wheel National Cars (PROTON & PERODUA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Azim, Roslan (2010) An Application Of 3D Modelling And Simulation Analysis In The Development Of Consumer Product Design (Folding Bicyle). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Rosdi (2015) Experimental Study On Camshaft Profile. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Ghani, Mohamad Nur Zahir (2016) Development Of Smart Monitoring Parking System Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hafiz, Ab Aziz (2009) Vehicle Handling Improving By Active Steering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hafiz, Abd Hamid (2010) Air Conditioning System Powered By Small Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hakim, Rohhaizan (2009) Investigation Of Pressure And Temperature Cause By From Turbo System In Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Abdul Jamal (2012) Rekabentuk Dan Fabrikasi Struktur Dadan Mobiliti Pengangkutan Peribadi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Mohd Mustaffa (2012) Stability Control For Quadcopter With An Autonomous Flight System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid, Nursheda (2016) The Human Analysis And Ergonomics For The Driver Seat Design Of A Tractor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Kadir, Faizul Akmar and Tamaldin, Noreffendy and Ayob, Md Razali and ABDULLAH, Mohd Azman and HUDHA, Khisbullah and Mat Yamin, Ahmad Kamal (2014) Vehicle Speed Control Using Gain Scheduling PID with Experimental Throttle-in-the-Loop. International Review on Modelling & Simulations, 7 (4). pp. 682-693. ISSN 1974-9821

Abdul Karim, Shamihah (2011) Simultaneous Decision Of Car's Battery Using Analytical Hierarchy Process At The Conceptual Design Stage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Karim, Kasrul and Othman, Md Nazri and Abdullah, Abdul Rahim and Ramli, Mohd zulkifli and Jidin , Auzani (2012) A CONVERSION OF ICE SYSTEM INTO ELECTRIC VEHICLE. In: Power and Energy Conversion Symposium (PECS 2012), 17 December 2013, Universiti Teknikal Malaysia Melaka, Melaka, Malaysia.

Abdul Karim, Kasrul and Othman, Md Nazri and Wan Hassan, Wan Ahmas Redhauddin and Bugis, Mohd Ismadi and Ramli, Mohd Zulkifli and Abdullah, Abdul Rahim and Jidin , Auzani (2014) Electric Vehicle Development And Prediction Of Battery Consumption Based On A Journey Profile. Applied Mechanics and Materials, 699. pp. 794-799. ISSN 1660-9336

Abdul Manaf, Muhammad Zaidan and Fakeruddin, Shafarul Hafidi and Mohamad Shukri , Zakaria and Mohd Noor Asril, Saadun and Mohd Hafidzal, Mohd Hanafi (2014) Mini acceleration and deceleration driving strategy to increase the operational time of flywheel hybrid module. Proceedings of International Conference on Mathematics, Engineering & Industrial Applications 2014 (ICOMEIA 2014). pp. 287-292. ISSN 2289-1323 (In Press)

Abdul Manaf, Muhammad Zaidan and Nik Mohamed, Nik Abdullah and Zakaria, Mohamad Shukri and Saadun, Mohd Noor Asril and Mohd Hanafi, Mohd Hafidzal (2013) Modeling of Flywheel Hybrid Powertrain to Optimize Energy Consumption in Mechanical Hybrid Motorcycle. Applied Mechanics and Materials, Volume. pp. 287-292. ISSN 1660-9336

Abdul Rafeq, Saleman and Musthafah, Mohd Tahir and Mohd Azman, Abdullah and Mohd Juzaila, Abd. Latif and Muhammad Zahir, Hassan and Syahibudil lkhwan, Abdul Kudus and Muhd Ridzuan, Mansor and Fudhail, Abd Munir (2012) Design And Fabrication Of A Race Car Vehicle For UTeM Formula Varsity 2012. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rashid, Abdul Jalil (2012) Merekabentuk Dan Menganalisis Kipas Penghembus Kenderaan Penumpang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Muhammad Radzie (2012) Mengkaji Daya Seretan (Drag Force) Terhadap Rak Bumbung (Roof Box) Kereta Bersaiz Kompak Dengan Menggunakan Kaedah Eksperimen (Terowong Angin). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Mohd Azman and Mansor, Muhd Ridzuan and Mohd Tahir, Musthafah and Abdul Kudus, Syahibudil Ikhwan and Hassan, Muhammad Zahir and Ngadiman, Mad Nasir (2012) Design, Analysis and Fabrication of Chassis Frame for UTeM Formula VarsityTM Race Car. In: International Conference on Manufacturing and Industrial Engineering (ICMIE’12) Dec. 29-30, 2012, Kuala Lumpur (Malaysia), 29 - 30 December 2012, Grand Seasons Hotel, Kuala Lumpur.

Abdullah, Mohd Azman and Tamaldin, Noreffendy and Ramli, Faiz Redza and Sudin, Mohd Nizam and Mohamed Muslim, Abdul Mu'in (2014) Analysis Of The Chassis And Components Of All Terrain Vehicle (ATV). Applied Mechanics and Materials, 660. pp. 753-757. ISSN 1660-9336

Abdullah, Mohd Azman and Tamaldin, Noreffendy and Ramli, Faiz Redza and Sudin, Mohd Nizam and Mohamed Muslim, Abdul Mu'in (2014) Design And Development Of Low Cost All Terrain Vehicle (ATV). Applied Mechanics and Materials, 663 (-). pp. 517-521. ISSN 1660-9336

Abdullah Firdaos, Mohd Lidin (2008) Natural Gas Vehicle (NGV) Engine Performance Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdurahman, Dwijotomo (2015) Intergration Of Vision Based Road Lane Detection For Automatic Steering Control (ASC) Application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abu Bakar, Ahmad (2011) Analysis The Future Application Of Renewable Energy On Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ag Yusop, Ag Mohd Hafizul Hasrul (2016) Sensitivity Study Of Rear Suspension Properties Toward Vehicle Dynamic Characteristic Using ADAMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad , Yaakob (2010) Evaluation Study On Static Analysis Of Automotive Brake System Using Numerical Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Aiman, Che Zakeria (2015) Handgrip Pressure And Hand Movement Analysis While Driving On Perodua's Car Steering Wheel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Aizat Aqmal , Hishamuddin (2015) Design and validate passive automotive engine mount system. Project Report. UTeM. (Submitted)

Ahmad Anwar , Mohamed Sabri (2013) Sistem Kawalan Brek Anti Kekunci (ABS). Project Report. UTeM, Melaka. (Submitted)

Ahmad Azmir , Ahmad Tarmizi (2008) Kajian Tentang Mereka Bentuk Brek Letak Kereta Elektrik Untuk Kereta Penumpang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Danial, Zakaria (2015) Development Of Thin Flat Chassis Of Multipurpose Remote Controlled Powered Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faiz, Hamzah (2010) Analysis Of Lubricant Performance For Motorcycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faiz Fikri, Ghazali (2009) Study Of Energy Absorption Of Motorcycle Safety Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizal , Yaacob (2008) Vehicle Active Steering System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fakhrullah, Abdul Rashid (2015) The Effect Of Engine Oil On Vehicle Fuel Consumption. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Firdaus, Mohammad Mohsin (2010) Design Of Automotive Chassis Electrical System Training Board. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hazwan, Fauzi (2009) Parking Brake Tester. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Kamal , Mat Yamin (2006) Aerodynamic Study of a Coach Using Computational Fluid Dynamic (CFD) Technique. Masters thesis, Coventry University.

Ahmad Muzahar , Mohd Zainal (2005) Menghasilkan Daya Tujahan Dengan Menggunakan Motor Dan Propeler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nur Qamari, Mohd Azhari (2009) Improvement Of Mechanical Properties Of Aluminum Alloy By Artificial Aging Treatment For Structural Application In Automobile. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rezduan, Zainal (2009) Development Of New Third Light Brake Signal On Motorcycle Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Ridhwan , Abdullah (2008) Design And Development Of Antilock Braking System For Motorcycle 110 Cc. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sadhiqin, Mohd Isira and Adi, Mohd Khafe and Zamre, Abdul Ghani (2010) Active Steering System Based on Nonlinear Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sadhiqin, Mohd Isira (2007) Active Steering System Based On Nonlinear Control System. Masters thesis, UTM.

Ahmad Sobri, Ishak (2009) Development Of Aerodynamic Smoke Tunnel Unit For Teaching And Learning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syahir, Sulaiman (2012) Analisis Daya Seret (Drag Force) Terhadap Rak Bumbung Kereta Kompak Dengan Menggunakan Kaedah Simulasi Dinamik CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zaifazlin , Zainordin (2014) Characterization of magnetorheological brake for speed control application. Masters thesis, UTeM.

Ahmad Zaifazlin , Zainordin (2009) Magnetorheological Brake System Characterization Using Non Parametric Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zharif Rabbani, Rozali (2008) Flow Investigation Around Sphere In Open Circuit Wind Tunnel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zul Fadzli, Mansor Taridi (2009) Simulation For Helicopter Control System Using LQR Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aiman Arrif, Ahamad Tarmizi (2012) Design And Fabricate A Brake System And Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Airin, Jalani (2006) Space Station Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aisyah Almajidaf Tan, Sofian Tan (2007) Effectiveness Of Oil Consumption At Motoring Test Case Study: Automotive Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aizat Fuad, Ahmad Shatar (2009) Studies And Design Of Suspension System For A Formula SAE Racing Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aizuddin Fahmi, Mohd Riduan (2015) Modelling And Simulation Of Cylinder Deactivation System Applied To Passenger Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akmarina Izza, Mokeri (2013) Smart Parking Via RFID Tag. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali Ilman, Abdullah (2012) Study Of Optimizing HX1 Car Air Conditioning Heat Exchanger By Using CFD Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alif Ikhsan , Karim (2015) Analysis of wheel rim on their design and strength. Project Report. UTeM. (Submitted)

Alif Zulfakar, Pokaad (2010) The Effectiveness Of Active Front Bumper System For Frontal Impact Protection Using Magnetorheological. Masters thesis, UTeM.

Aliff Fahmi , Radzi (2013) Green technology of synthetic rubber for the future tire. Project Report. UTeM. (Submitted)

Alimin, Ahmad Jais and Tamaldin, Noreffendy and Mamat, Rizalman (2011) Strategic Research Partnership on Automotive Powertrain & Fuels in Universiti Malaysia Pahang, Universiti Teknikal Malaysia Melaka & Universiti Tun Hussein Onn Malaysia. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Amaluddin, Zainuddin (2015) Wireless Power Transfer For Electric Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amar Ridzuan, Abd Hamid (2011) Design And Fabrication Of Glass - Fiber Composite Bodywork For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aminurrashid , Noordin and Mohd Azli , Salim and Mohd Razali , Mohamad Sapiee and Sulaiman , Sabikan and Mohd Hanif , Che Hasan and Zamani, Md Sani and M.H., Othman (2012) Development of a quadruped crawling robot prototype. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012, Melaka, Malaysia . (Submitted)

Amir, Mohd Zubir (2016) Development Of Steer-By-Wire (SBW) Controller System For Steering Respone. Masters thesis, Universiti Teknikal Malaysia Melaka.

Amir Afham, Sulaiman (2015) Design And Analysis A Reliable And Comfortable Seat For Bicycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Shafiq, Hsan Baseri (2010) Solar-Powered Electric Bicycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amjad Saddar , Md. Isa (2013) Pembangunan Sistem Kuasa Penggerak Hibrid Elektrik Untuk Kenderaan Dua Alam UTeM. Project Report. UTeM, Melaka. (Submitted)

Ammar Alfaiz, Mustaffa Albakri (2011) Design And Fabrication Of A Semi Automatic Gear Shifting Mechanism For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amrik Singh, Phuman Singh (2009) Modeling And Simulation Of 14 DOF Vehicle Dynamics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amrik Singh, Phuman Singh and Mohd Azman, Abdullah and Ranjit Singh, Sarban Singh (2014) Development Of Vehicle Rollover Prevention System Using Active Braking. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amrul , Omar (2008) Suspension Geometry Analysis Of Formula Varsity Race Car. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Amzatul Akmam, Mokhtar and Md. Radzai, Said (2006) Axial crushing of fiber filled thin tubes. In: Seminar Pencapaian Penyelidikan KUTKM (REACH 2006), 18 - 20 Disember 2006, Holiday Inn Resort, Batu Feringgi, Pulau Pinang. (Submitted)

Ani, Mohammad Firdaus (2016) Developing Regression Models Of Driver Fatigue Using An Ergonomics Approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Anuar , Piji (2007) Modeling And Analysis Of Desmodromic Valve Train. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Aqilah, Othman@Omar (2006) Two Level Power Car Alarm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arina , Zakaria (2010) Study On Shock-Absorbing Properties Of Square Tube Strengthening Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asok Max , Subramaniam (2013) Active Suspension Control Of Ground Vehicle Heave And Pitch Motion. Project Report. UTeM, Melaka. (Submitted)

Awangku Mohd Hazmin , Awang Zainal (2010) Study Of The Effect Of Variable Speed Fan On The Radiator Cooling System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azhar, Mohamad Amin Ariff (2015) Design, Install And Monitor Of Hydronic Radiant Cooling System In An Enclosed Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azidin, Farid Arafat and Hannan, Mahammad Abdul and Mohamed, Azah (2013) Renewable Energy Technologies and Hybrid Electric Vehicle Challenges. PRZEGLĄD ELEKTROTECHNICZNY (Electrical Review), 89 (8). pp. 150-156. ISSN 0033-2097

Azidin, Farid Arafat (2016) Energy Management System For Three-Wheel Light Electric Vehicle Using Multi-Sources Energy Models. PhD thesis, Universiti Teknikal Malaysia Melaka.

Azidin, Farid Arafat and Hannan, Mahammad Abdul and Mohamed, Azah (2013) An Energy Management of Light Electric Vehicle. An Energy Management of Light Electric Vehicle, 2 (2). pp. 271-276. ISSN 2315-4462

Aziz, Ahmad Zuhairi (2016) Contribution Of Lightweight Materials To The Design And Manufacturing Of An Electric Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizi, Adnan (2005) Design And Fabrication Of Test Jig For Motorcycle Suspension Performance Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizul Hakim, Kamardin (2015) The Effect Of Piston Head On The Performance Of Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizul Hilmi , Ahmad (2008) Topology Optimization In Automotive Bumper Beam Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlilawati , Ishak (2008) Vehicle Protection System From Water Flooding. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azma, Putra and Wong, Hee Kiong and Nawal Aswan, Abdul Jalil (2014) Measurement Of Structure-Borne Noise From Road Input In A Motor Vehicle Cabin. Asean Engineering Journal, 4 (2). pp. 29-41. ISSN 2229-127X

Azman, Mat Sari (2011) Design And Development Of An Automatic Bicycle. Project Report. UTeM, Melaka Malaysia. (Submitted)

Azman , Ismail (2009) Simulation And Experimental Investigation On A Pneumatically Actuated Active Suspension System Using Gain Scheduling PI Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Awang Md Isa and Zahriladha, Zakaria and Fauzi, Mohd Johar (2007) In-Flight Prayer Times And Qiblat Direction Using GPS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmir, Mat Zain (2010) Design Of MR Fluid Base Brake System For Motorcycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azril, Othman (2005) Design And Fabricate An Open-Circuit Miniatute Sized Wind Tunnel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrul Hafez , Mohamad (2013) Study Of Design And Fabricate Driving Simulator. Project Report. UTeM, Melaka. (Submitted)

B

Bahari, Norhazilina and Jidin , Auzani and Abdullah, Abdul Rahim and Othman, Md Nazri and Manap, Mustafa (2012) Modeling and Simulation of Torque Hysteresis Controller for Brushless DC Motor Drives. In: IEEE Symposium on Industrial Electronics and Applications (ISIEA), 2012 , 23-26 Sept. 2012, Bandung, Indonesia.

Bahri, Azizi (2013) Simulation and analysis of material transport system in automotive industry area. Masters thesis, UTeM.

C

Carla Regina, Yaling (2015) Design And Simulation Of Go-Kart Active Rear Spoiler Air Foil Shape Using Computational Fluid Dynamics (CFD) Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Hong Ket (2010) Study Of Internal Heat Exchanger Effects On Car Air Conditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chau, Kar Hoo (2015) Panic Sensing And Spontaneous Stability System To Avoid Accident. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Engku Roziana , Che Engku Harun (2008) Pembaharuan Pada Sistem Kunci Kereta (Proton Wira). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Hasan, Mohd Hanif and Md Sam, Yahaya and Aripin, Muhamad Khairi (2017) Implementation Of Robust Composite Nonlinear Feedback For Active Front Steering Based Vehicle Yaw Stability. Jurnal Teknologi, 79 (5-2). pp. 39-43. ISSN 0127-9696

Che Hasan, Mohd Hanif and Md Sam, Yahaya and Kemao , Peng and Aripin, Muhamad Khairi and Ismail, Muhamad Fahezal (2014) Composite Nonlinear Feedback for Vehicle Active Front Steering. Applied Mechanics and Materials, 667. pp. 127-134. ISSN 16609336, 16627482

Cheng, S.Y. (2013) Aerodynamic Pitching Stability of Sedan-type Vehicles Influenced by Pillar-shape Configurations. In: SAE 2013 World Congress & Exhibition, 16-18 April 2013, Detroit, USA.

Cheng, S.Y. (2012) Aerodynamic stability of road vehicles in dynamic motion. In: The Seventh International Colloquium on Bluff Body Aerodynamics and Applications, 2-6 September 2012, Shanghai, China.

Cheng, S.Y. (2013) Aerodynamic stability of road vehicles in dynamic pitching motion. Journal of Wind Engineering and Industrial Aerodynamics, 122. pp. 146-156. ISSN 01676105

Cheng, S.Y. (2012) Effects of Transient Aerodynamics on Vehicle Stability: A Large Eddy Simulation analysis. In: 30th AIAA Applied aerodynamics Conference, 26-28 June 2012, New Orleans, USA.

Cheng, S.Y. (2011) Large eddy simulation of flow past road vehicles subjected to pitching oscillation. In: 20th AIAA Computational Fluid Dynamics Conference, 27-30 Jun 2011, Hawaii, USA.

Cheng, S.Y. (2011) Numerical analysis of the effects of transient aerodynamics on driving stability. In: The Sixth Japan-Taiwan Workshop on Mechanical and Aerospace Engineering, 7-10, Dec 2011, Sapporo, Japan.

Cheng, S.Y. (2012) Numerical quantification of aerodynamic damping on pitching of vehicle-inspired bluff body. Journal of Fluids and Structures. pp. 188-204. ISSN 08899746

Cheng, S.Y. (2010) On the aerodynamic damping mechanism of vehicle pitching stability using Large Eddy Simulation. In: The 24th Computational Fluid Dynamics Symposium, 20 – 22 December 2010, Tokyo, Japan.

Cheng, S.Y. (2012) On the unsteady aerodynamics of road vehicles in the dynamic motions. In: 9th International ERCOFTAC Symposium on Engineering Turbulence Modelling and Measurements, 6 - 8 June 2012, Thessaloniki, Greece.

Cheng, S.Y. (2011) A numerical analysis of transient flow past road vehicles subjected to pitching oscillation. Journal of Wind Engineering and Industrial Aerodynamics, 99 (5). pp. 511-522. ISSN 01676105

Cheok, Yong Seng and Zulkifilie, Ibrahim (2012) Vector control drive of permanent magnet synchronous motor based dsSpace DS1103 implementation. In: 2012 IEEE International Power Engineering and Optimization Conference (PEDCO) , 6-7 June 2012, Melaka, Malaysia. (Submitted)

Cheong, En Yi (2010) Smart Car Alarm System Using Pic Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Wai Pick (2010) Study Of Aircraft Propeller - Structural Strength. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin , Fen Ying (2014) Analysis on passive vehicle suspension system. Project Report. UTeM. (Submitted)

Cho, Hon Meng (2015) Turbulence Modeling Verification For Bluff Body Flow. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choo, Hui Hui (2013) A Study Of Work Postures And Grip Force For Carpal Tunnel Syndrome (CTS) Among Workers In Aero Space Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choong, Kei Shing (2009) Design And Development Of Drive Simulator For Vehicle Dynamic Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

D

D. Ravisankar, Devarajee (2012) System Identification Of Electronic Wedge Brake (EWB). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dahlan, Ainol Suhada (2016) Automatic Tyre Pressure Replenishing System Development Assisted By Mathematical Modelling And Finite Element Analysis. PhD thesis, Universiti Teknikal Malaysia Melaka.

Danial Sophian, Onn (2015) Performance Analysis Of Formula Varsity Car Tyre. Project Report. UTeM, Melaka, Malaysia. (Submitted)

de Lillo, Liliana and Empringham, Lee and Wheeler, Patrick and Khwan-on, Sudarat and Gerada, Christopher and Othman, Md Nazri and Huang, Xiaoyan (2010) Multiphase Power Converter Drive for Fault-Tolerant Machine Development in Aerospace Applications. Industrial Electronics, IEEE Transactions on (Volume:57 , Issue: 2 ) , Volum (Issue:). pp. 575-583. ISSN 0278-0046

E

E. A., Azrulhisham and Y. M., Asri and A. W. , Dzuraidah and N. M., Nik Abdullah and A. , Shahrum and C. H., Che Hassan (2010) Evaluation Of Fatigue Life Reliability Of Steering Knuckle Using Pearson Parametric Distribution Model. International Journal of Quality, Statistics, and Reliability, 2010. pp. 1-8. ISSN 1687-7152

Efariani, Abdul Rahim (2015) Finite Element (FE) Analysis Of Drum Brake System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Effendi , Mohamad and Adi , Saptari and Rohana , Abdullah (2012) The Implementation Of Risk Management In An Aerospace Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Em, Poh Ping (2009) Development Of A Simple CVT System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Engku Zaidi, Engku Ibrahim (2009) Kajian Analisis Risiko Kualitatif Dan Kuantitatif Pada Penggunaan Stesen Pengisian Gas Asli (NGV). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ezza Farhana , Hassan (2015) Smart trolley with RFID. Project Report. UTeM. (Submitted)

F

Fadhilah, Shikh Anuar (2012) A Study Of Copper Based Nanofluids Thermophysical Properties As Advanced Coolant In Automotive Radiator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadhli, Syahrial and Safarudin Gazali , Herawan and Nazri , Md Daud (2012) Development Of Electric Formula Varsity Race Car For Green Campus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faezah, Hashim (2011) Intelligent Safety Helmet For Motorcyclist. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fahrulrazi, Hashim (2009) Solar Powered Electric Bicycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizil, Wasbari (2013) Study Of Heat Exchanger Effects On Car Air - Conditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizul Akmar, Abdul Kadir and Khisbullah, Hudha and Mohd. Zakaria, Mohd. Nasir and Ubaidillah, . (2007) Development of a Magnetically Activated Brake System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizul Akmar, Abdul Kadir (2006) The behavior of vehicle during cornering. Masters thesis, Coventry University.

Farizzamzam, Nasruddin (2009) Design And Analysis Of The Drivetrain System For Formula SAE Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fauzi, Ahmad (2009) Gain Scheduling PID Control With Pitch Moment Rejection For Pneumatically Actuated Active Suspension. Masters thesis, UTeM.

Fauzi, Mohd. Johar (2004) Pembangunan Simulasi Penerbangan Peluru Berpandu Jenis Cruise dan Balistik. PhD thesis, Universiti Kebangsaan Malaysia.

Febrian, Idral (2010) Conceptual Of A Single Seater Formula Racing Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Firkhan Akhmadeen , Maarof (2008) Kinematic Study Of A Macpherson Susupension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fitrian , Imadduddin (2010) Control Of Pneumatically Actuated Active Suspension System Using Multiple Proportional - Integral With Knowledge - Based Fuzzy. Masters thesis, UTeM.

Fong, See Yan (2009) Longitudinal Aerodynamic Performance Of An Aircraft Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fudhail, Abdul Munir (2011) Design And Fabrication Of A Lightweight Dry Clutch Disc For A Mini Farming Tractor. Project Report. UTeM. (Submitted)

G

Goh , Chep Kien (2009) Design And Development Of Tire Force Measuring Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh , Wern Chie (2008) The Study Of Flow Visualization On LNT Catalytic Converter Using CFD-Fluent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

Hady , Efendy (2011) Utilization Of Palm Waste As An Alternative Powder Reinforcement In Friction Materials Non- Asbestos In Manufacturing Motorcycle Brake Pad. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafizah, Che Hussin (2009) Study On The Aftermarket Production Of Ignition System In Relation of Engine Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafizin , Hanipah (2013) Design And Development Of A Protable Spark Plug Tester For Motocycle User. Project Report. UTeM, Melaka. (Submitted)

Hairul Effendy, Ab Maulod (2015) Constitutive Modeling Of Softening In Swollen Elastomers Under Long Term Cyclic Loading. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hairul Nizam, Talib and Zulkifilie, Ibrahim and N. A. , Rahim and N. M., Yaakob (2012) Development of combined vector and torque control methods for independent two induction motor drives. In: IEEE International Power Engineering and Optimization Conference (PEDCO), 6-7 June 2012, Melaka, Malaysia. (Submitted)

Hambali, Arep@Ariff (2009) Selection Of Conceptual Design Using Analytical Hierarchy Process For Automotive Bumper Beam Under Concurrent Engineering Environment. PhD thesis, Universiti Putra Malaysia.

Hambali, Arep @ Ariff (2008) Development Of Design Concept Selection Using Analytical Hierarchy Process (AHP) For Automotive Components. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzah, Sakidin and Mohd Ruddin, Ab Ghani and Syed Najib, Syed Salim and Norsarizan, Mat Youb (2010) Active Suspension Using Optimal Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hannan, MA and Azidin, FA and Mohamed, Azah (2014) Hybrid electricvehiclesandtheirchallenges:Areview. Renewableand Sustainable Energy Reviews. pp. 135-150. ISSN 0033-2097

Hannan, MA and Azidin, FA and Mohamed, A (2012) Light Vehicle Energy Management System using Multi-Power Sources. PRZEGLĄD ELEKTROTECHNICZNY (Electrical Review), 88 (3b). pp. 197-204. ISSN 0033-2097

Harun, Ahmad Izzuddin (2016) The Profile Design Identification Based On Graphical Approach Forwards Cognitive Style. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasfarizal, Farizad (2015) Design And Modification For Child Restraint Seat On Moped Motorcycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hashim, Muhammed Noor (2016) An Optimization Of Drag Reduction Of An Automotive Roof Box. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hasmel , Nazray (2008) Design And Development Chassis For The Fire Fighting Vehicle. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hassan, Muhammad Zahir and Abdul Kudus, Syahibudil Ikhwan and Halid, Mohd Shazni and Abdul Manaf, Muhammad Zaidan (2013) Stability Analysis for Buoyancy UTeM’s Amphibious Hybrid Vehicle (AHV). International Journal of Mechanical Engineering applications Research – IJMEAR, 4 (E090). pp. 296-302. ISSN 2249- 6564

Hassan, Muhammad Zahir and Abdul Manaf, Muhammad Zaidan and Halid, Mohd Shazni and Alehan, Muhammad Nadzeer and Md Isa, Amjad Saddar (2013) UTeM`s Amphibious Hybrid Vehicle: Ride and Handling Analysis. Applied Mechanics and Materials, 393. pp. 354-359. ISSN 1662-7482

Hassan, Muhammad Zahir and Brooks, P.C. and Barton, D.C. (2013) 采用全联热-机械有限元模型计算盘式制动器尖叫声的预测工具 (A Predictive Tool to Evaluate Disk Brake Squeal Using A Fully Coupled Thermo--Mechanical Finite Element Model). Drive System Technique (传动技术), 27 (3). pp. 39-48. ISSN 1006-8244

Hassan, Muhammad Zahir and Md Isa, Amjad Saddar and Abdul Kudus, Syahibudil Ikhwan and Abdul Manaf, Muhammad Zaidan (2013) UTeM`s Amphibious Hybrid Vehicle: Development of Hybrid Electric Propulsion System. International Review of Mechanical Engineering, 7 (5). pp. 790-794. ISSN 1970-8734

Hassan, Muhammad Zahir and Razali, Muhammad Razil and Halid, Mohd Shazni (2013) Design and Development of Amphibious Hybrid Vehicle Body Structure. International Journal of Science and Research (IJSR). pp. 220-223. ISSN 2319-7064

Hassan, Muhammad Zahir and Zainal Ariffin, Haziq Irfan (2013) Development of Vehicle Blind Spot System for Passenger Car. Applied Mechanics and Materials, 393. pp. 350-353. ISSN 1662-7482

Hassan, Muhammad Zahir (2009) Thermal Deformation Analysis of Automotive Disc Brake Squeal. PhD thesis, University of Leeds.

Hassan, Muhammad Zahir (2013) The evaluation of disc brake squeal propensity through a fully coupled transient thermomechanical model. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 227 (3). pp. 361-375. ISSN 0954-4070

Hassan, Muhammad Zahir and Abdul Munir, Fudhail and Salim, Mohd Azli (2015) Design of Chassis Frame for All-Terrain Vehicle for Educational Purposes. Applied Mechanics and Materials , 695. pp. 742-745. ISSN 1662-7482

Hassan, Muhammad Zahir and Abdul Munir, Fudhail and Salim, Mohd Azli (2015) Finite Element Analysis on Brake Disc of an Educational All-Terrain-Vehicle. Applied Mechanics and Materials , 695. pp. 535-538. ISSN 1662-7482

Hassan, Muhammad Zahir and Ahmad, Fauzi and Aparow, Vimal Rau and HUDHA, Khisbullah (2013) Identification of Intelligent Controls in Developing Antilock Braking System. Journal of Advanced Manufacturing Technology, 7 (1). pp. 1-13. ISSN 1985-3157

Hassan, Muhammad Zahir and Alehan, Muhammad Nadzeer and Md Isa, Muhammad Fahmi and Abdul Manaf, Muhammad Zaidan (2013) Design, Analysis and Fabrication of Space Frame Chassis for Amphibious Hybrid Vehicle. International Journal of Engineering Sciences Research-IJESR. pp. 864-866. ISSN 2230-8504

Hassan, Muhammad Zahir and Brooks, P.C. and Barton, D.C. (2008) Fully Coupled Thermal-Mechanical Analysis of Automotive Disc Brake Squeal. In: Inaugural Automotive Researchers' Conference,, 8-9 January 2008, University of Huddersfield, United Kingdom.

Hassan, Muhammad Zahir and Brooks, P.C. and Barton, D.C. (2008) Thermo-Mechanical Contact Analysis of Car Disc Brake Squeal. SAE International Journal Passenger Cars – Mechanical System, 1 (1). pp. 1230-1239. ISSN 1946-3995

Hassan, Muhammad Zahir and Brooks, P.C. and Barton, D.C. (2008) Thermo-Mechanical Contact Analysis of Car Disc Brake Squeal. In: 26th Annual Brake Colloquium & Exhibition SAE International, 12 October 2008, St Antonio, Texas USA.

Hassan, Muhammad Zahir and Brooks, P.C. and Barton, D.C. (2009) A predictive tool to evaluate disk brake squeal using a fully coupled thermo-mechanical finite element model. International Journal Vehicle Design, 51 (1-2/20). pp. 124-142. ISSN 1741-5314

Hassan, Muhammad Zahir and Magaswaran, K. and Phuman Singh, A.S. (2014) A NEW METHOD IN THE IDENTIFICATION OF NOISE AND VIBRATION CHARACTERISTICS OF AUTOMOTIVE DISK BRAKES IN THE LOW FREQUENCY DOMAIN. International Journal of Automotive and Mechanical Engineering (IJAME), 9 (Januar). pp. 1554-1577. ISSN 2180-1606

Hassan, Muhammad Zahir and Md Isa, Muhammad Fahmi and Razali, Muhammad Razil and Abdul Manaf, Muhammad Zaidan (2013) Structure Analysis of Cast Iron for Dry Clutch of Amphibious Vehicle. International Journal of Engineering Trends and Technology (IJETT), 4 (5). pp. 1768-1771. ISSN 2231-5381

Hassan, Muhammad Zahir and Shamsudin, Shamsul Anuar (2005) Designing and Building Go-Karts As An Engineering Student Project. In: 4th Asia-Pacific Forum on Engineering and Technology Education, 26-29 September 2005, Bangkok Thailand.

Hazila , Nayan (2007) Analysis Of The Performance Of A Combustion Chamber Gas Turbine. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Hendra, Ruding (2009) Membangunkan Enjin Motosikal Menggunakan Bahan Api LPG. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Heng , Seok Teik (2013) Design of a dynamic vibration absorber. Project Report. UTeM. (Submitted)

Herman , Edmeades (2008) Fabricating A Car's Radiator. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hilmi , Amiruddin (2006) Disc Brake Performance Finite Element Analysis (FEA). Masters thesis, Coventry University .

Hilmi Safuan, Japar (2010) Aerodynamic Study Of Heavy Truck Using CFD Fluent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

I

Ian Divine , Hillary Bajau (2008) Small Scale Intelligent Vehicle. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ibrahim, Azhar (2016) Antilock Braking System Control Using Fractional Gain PID Controller. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ibrahim, Zulkifilie and Mohd Yaakop, Nurazlin and Sulaiman , Marizan and Mat Lazi, Jurifa and Abu Hasim, Ahmad Shukri and Patakor, Fizatul Aini (2012) Electric Differential With Svpwm Direct Torque Control Using Five-Leg Inverter For Electric Vehicles. Journal of Theoretical and Applied Information Technology, 46 (2). pp. 599-609. ISSN 1992-8645

Idham, Ahmad (2008) Active Suspension System With State Feedback Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Intan Liyana, Ismail (2012) Manufacturing Process Selection For Automotive Bumper Fascia Using Analytical Hierarchy Process (AHP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izhar Hifnie, Mohd. Amin (2009) Design And Analyze The Chassis Of An Electric Vehicle For Use In Campus Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

J

Jamaludin, Abdullah (2010) Skuter Elektrik Boleh Lipat Menggunakan Hab Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamaludin, Mohd Zaini (2011) Design And Fabrication Of Pedal Components For UTeM Formula Style Race Car. Project Report. UTeM, Melaka. (Submitted)

Jamarizan , Mohd Isa (2008) Design And Development Of Locking Device For Proton Waja Glove Box. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamieshah , Jamil (2010) Design And Analysis KR-150 Go-Kart. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jayahkudy, Raguvaran (2016) Application Of Bio-Glycol To Inhibit Natural Pressure Loss In Automotive Type. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jidin, Auzani and Nik Idris, Nik Rumzi and Mohamed Yatim, Abdul Halim and Sutikno, Tole (2011) A hybrid DTC-DSC drive for high performance induction motor control. Journal of Power Electronics, 11 (5). pp. 704-712. ISSN 15982092

Jidin, Auzani and Nik Idris, Nik Rumzi and Mohamed Yatim, Abdul Halim and Sutikno, Tole and Elbuluk, Malik (2011) Extending Switching Frequency for Torque Ripple Reduction Utilizing a Constant Frequency Torque Controller in DTC of Induction Motors. Journal of Power Electronics, 11 (2). pp. 148-155. ISSN 15982092

Jidin, Aiman Zakwan and Lim, Siau Li and Kadmin, Ahmad Fauzan (2017) Implementation Of Algorithm For Vehicle Anti-Collision Alert System In FPGA. International Journal of Electrical and Computer Engineering (IJECE), 7 (2). pp. 775-783. ISSN 2088-8708

Jidin, Auzani and Nik Idris, Nik Rumzi and Mohamed Yatim, Abdul Halim and Sutikno, Tole and Elbuluk, Malik (2011) An Optimized Switching Strategy for Quick Dynamic Torque Control in DTC-Hysteresis-Based Induction Machines. IEEE Transactions on Industrial Electronics, 58 (8). pp. 3391-3400. ISSN 0278-0046

Jidin, Auzani and Nik Idris, Nik Rumzi and Mohamed Yatim, Abdul Halim and Sutikno, Tole and Elbuluk, Malik (2012) A Wide-Speed High Torque Capability Utilizing Overmodulation Strategy in DTC of Induction Machines With Constant Switching Frequency Controller. IEEE Transactions on Power Electronics, 27 (5). pp. 2566-2575. ISSN 0885-8993

Jidin, Auzani and Sutikno, Tole and Nik Idris , Nik Rumzi and Jidin, Aiman Zakwan and Mohamed Yatim, Abdul Halim (2010) A Novel Dynamic Overmodulation Strategy of Direct Torque Control. TELKOMNIKA: Indonesian Journal of Electrical Engineering, 8 (3). 275 -284. ISSN 1693-6930

Jidin , Auzani and Nik Idris, Nik Rumzi and Mohamed Yatim, Abdul Halim and Sutikno, Tole and Elbuluk, Malik (2011) Simple Dynamic Overmodulation Strategy for Fast Torque Control in DTC of Induction Machines With Constant-Switching-Frequency Controller. IEEE Transactions on Industry Applications, 47 (5). pp. 2283-2291. ISSN 0093-9994

Joehan, Ariff Ismail (2012) Design And Fabricate An Ergonomics Cockpit For Single Seater Formula Varsity Electric Racing Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Julia, Luming (2015) The Application Of C- Shaped Curve In Air Filter Design: A Case Of Performance Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juliana, Yaakub (2012) Reclamation Of Aerospace-Grade Carbon Fibre Prepreg Waste Through Second Impregnation Of Thermoset Polymer Via Hand Lay-Up Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Julianous , Ketihus (2014) Study and development of the drag reduction system for go-kart. Project Report. UTeM. (Submitted)

K

Kamal Ruzuan, Mat Hussin (2009) An Investigation Of Motorcycle Disc Brake Rotor Using Finite Element Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarul Ariffin, Ruslani (2008) Merekabentuk Sistem Suspensi, Brek dan Sistem Roda Untuk Formula SAE. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamaruzaman, Muhamad Fakri Hakim (2015) Design And Performance Analysis Of Solar Bicycle For A Sustainable Local Commute. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kasrul, Abdul Karim and Md Nazri , Othman and Auzani , Jidin and Mohd Zulkifli, Ramli (2014) Development Of Integrated Monitoring System For Re-Electric Vehicle. Jurnal Teknologi, 71. pp. 99-104. ISSN 2180–3722 (Submitted)

Kee, Low Chit (2009) The Design And Development Of Pneumatic Impulse Rocket For Night Parachute Search Lighting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairil Amri, Muhamad Tajuddin (2015) Engine Performance Analysis Using GT-Power Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairil Anuar, Muhamad (2011) Study On The Heat Dissipation Properties On Palm Waste Brake PAD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairuddin, Osman (2007) Modeling And Controller Design For A Cruise Control System. Masters thesis, UTM.

Khairuddin, Osman and Mohd. Shakir, Saat and Ahmad Sadhiqin, Mohd. Isira (2009) Cruise Controller System Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Anuar, Ahmad (2009) An Investigation Of Turbine Blade Failure In Aircraft Turbine Engines. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Azri, Azlan (2009) Development Of An Active Bumper System To Reduce Vehicle Crash Impact. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Hafiz, Megat Bohri (2011) Design And Analysis Of Muffler Of Car Exhaust System Based On Solidwork Express. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Hazwan, Abu Bakar (2009) Low-Cost Automatic Headlight Dimmer System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Najjib , Shokhaimi (2009) Study On Operating Engine Temperature In Relation With Engine Performance. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Khairulizani, Azman (2015) Virtual Testing Of Suspension Coil Spring Using FE Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairunnisak, Kamarozaman (2012) Design And Development Of Object Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khaleel, Mohamed Adnan (2016) An Investigation Of Car Bumper With Respect To Impact Energy Absorption. Masters thesis, Universiti Teknikal Malaysia Melaka.

Khalis, Suhaimi (2011) Design And Fabrication Of An Upright With Brake Caliper Mounting For Formula Varsity Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kher, V.K. and Tan, CheeFai and Ranjit, S.S.S. (2012) BUS ACCIDENTS PREVENTION WITH AN INTEGRATED STEERING SYSTEM. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia .

Khisbullah , Hudha and zakaria, Mohd Hafidz and tamaldin, noreffendy (2011) Hardware in the Loop Simulation of Active Front Wheel Steering control for yaw disturbance rejection. International Journal of Vehicle Safety, 5 (4). pp. 356-373. ISSN 1479-3105

Khor, Teik Lim (2008) Design And Development Of Safety Pedal Lock For Manual Gear's Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khor, Mei Yin (2015) Air Flow And Temperature Distribution Analysis In An Air Conditioned Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khusyairi, Abd Aziz (2009) Unmanned Aerial Vehicle (UAV) Monitoring Surveillance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kismera , Mohamed Amin (2013) Radiator cleaning equipment. Project Report. UTeM, Melaka. (Submitted)

Kong, Wei Shen (2013) Design And Fabrication Of A Reduced Scale Tire Test Machine. Project Report. UTeM, Melaka. (Submitted)

Kow, Kok Lim (2013) Development Of Active Suspension For Passenger Car. Project Report. UTeM, Melaka. (Submitted)

Kuah, Chuen Tse (2008) Design Of Automotive Parts For 5 Axis Milling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kumaresan, Magaswaran (2010) A Study Of Windshield Automotive Wiper Noise And Vibration Using Finite Element (FE) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kumaresan, Magaswaran (2014) Low frequency friction induced vibration of automotive disc brake. Masters thesis, UTeM.

L

Lai, Qili (2013) Development Of Four Wheel Steering For Vehicle Handling Enhancement. Project Report. UTeM, Melaka. (Submitted)

Lau, Saijod T.W. and Said, M. R. and Yaakob, Mohd Yuhazri (2012) On the effect of geometrical designs and failure modes in composite axial crushing: A literature review. Composite Structure, 94 (3). pp. 803-812. ISSN 0263-8223

Lee, Kok Tai (2013) Modeling, Simulation And Validation Of Reduced Scale Vehicle Dynamics Model. Project Report. UTeM, Melaka. (Submitted)

Lee, Liu Hui (2010) Parking System Using Labview With SMS Application. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lee, Yee Chern (2015) Development Of An Active Braking System For A Go Kart. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee , Tze Jian (2009) Development Of Data Acquisition System For Tyre Force Measuring Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leong, Seng Wah (2009) Steering Control For A Car Using Backstepping Control Strategy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Kean Fei (2013) Design Of A Comfortable Bus Passenger Seat. Project Report. UTeM, Melaka. (Submitted)

Lim, Chee How (2010) Car Steering Control System For Disability Person. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Fong Kiaw (2009) Air Flow Around Bodies In Subsonic Wind Tunnel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Yen Ching (2011) Parking Monitoring System Using LabVIEW. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Kian Wee (2015) Modelling Of A Small Scale Quadrotor System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Swee Meng (2009) Rolling And Yawing Aerodynamic Performance Of An Aircraft Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Sin Ni (2012) Intelligent Car Park System. Project Report. UTeM, Melaka. (Submitted)

Lim , Chen Chuan (2014) Impact of EV charging on LV networks. Project Report. UTeM. (Submitted)

Lim , Seong Chuan (2014) Development and vibration analysis of go-kart system. Project Report. UTeM. (Submitted)

Lina , Lo (2008) Automated Parking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling, Pick Tung (2005) The Characteristics Of Air Free Jet Flows. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loganathan, Sivajothy (2005) Critical Volume For Maximum Efficiency Of Exhaust Fan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Logeswaran, Kanasin (2010) Design Optimization Of Third Brake Light And Signal System On Motorcycle Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Kah How (2016) Improved GPS Single Point Positioning Using Weighted Least Square Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Zhia Yew (2008) Front Wheel Drive, Rear Wheel Drive, And Four Wheel Drive Effect Comparison To Vehicle Directional Stability. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loi, Wei Cheong (2012) Regenerative Braking Systems (RBS): Energy Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Seong Gook (2008) Disc Brake Performance : FEA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Soo Har (2010) R66 Bus Superstructure Concept Design Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

Magaswaran, K. and Hassan, Muhammad Zahir and Phuman Singh, A.S. (2014) A Parallel Study of Vibration Analysis and Acoustic Analysis in Low Frequency Brake Noise. APPLIED MECHANICS AND MATERIALS, 471. pp. 35-39. ISSN 1662-7482

Magaswaran, K. and Phuman Singh, A.S. and Hassan, Muhammad Zahir (2013) An Analytical Model to Identify Brake System Vibration within the Low Frequency Domain. SAE International , SAE Technical Paper 2013-01-2033. pp. 1-8. ISSN 0148-7191

Mat Nor, Mohd Firdaus (2008) FEM Analysis And Improve Design Of Frontal Bumper Of Wira. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Yamin, Ahmad Kamal (2012) Pulsating Flow Studies in a Planar Wide-angled Diffuser Upstream of Automotive Catalyst Monoliths. PhD thesis, Coventry University.

Mat Yamin, Ahmad Kamal (2016) Tutorial 1: Finite Element Analysis of a Cruciform Braced Chassis Frame using ANSYS Workbench. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2016) Tutorial 1: Fluid Flow Through a Duct Bend using ANSYS Workbench. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2016) Tutorial 2: Fluid Flow Through an Automotive Catalyst Monolith using ANSYS Workbench. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal and Benjamin, S. F. and Roberts, C. A. (2013) Pulsating flow in a planar diffuser upstream of automotive catalyst monoliths. International Journal of Heat and Fluid Flow, 40 (2013). pp. 43-53. ISSN 0142-727X

Mat Yamin, Ahmad Kamal and Benjamin, Stephen and Roberts , Carol A and Pierson, Steve (2010) Modelling an Axisymmetric Perforated Brick Catalyst. In: Star European Conference 2010, 22 - 23 March 2010, London.

Mat Yamin, Ahmad Kamal and Tamaldin, Noreffendy and Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Ahmad, Fauzi (2015) Self-Assessment Report 2015 for Bachelor of Mechanical Engineering (Automotive) with Honours. Documentation. Universiti Teknikal Malaysia Melaka. (Unpublished)

Mathivaanan , Mariappan (2011) Wireless Vehicular Communication Network Using NCTU Network Simulation (NCTUNS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Hairul Nizam , Talib (2005) Simulation Of A Matrix Converter Controller, Electro Mechanical Actuator-EMA (For Realistic Operation Condition). Masters thesis, University of Nottingham.

Md Isa, Nurhazimah (2008) A Study On An Engine Cooling Unit Of Automotive Engine Test Bed. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Isa , Ali and Mohd Yusoff , Sulaiman and Juhari, Ab. Razak (2006) Test Rig Development Of Automotive Radiator Performance On A Vehicle Engine Block. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Monir, Md Najmi (2016) Investigation On The Use Of Air Flow Indicator In Vehicle Air Conditioning Sensor As Dust Particle Accumulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Safirul Shafik, Ramlee (2010) Pocket Tacho Meter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mior Mohd Amin, Mior Lokman (2008) Wind Tunnel Test : Whether Between Simplified And Detailed Model Shows Any Difference In Coefficience Of Drag And Lift. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mirni, Abdul Ghani (2011) Kajian Mengenai Daya Aerodinamik Pada Sayap Hadapan Kereta Lumba Menggunakan Kaedah Simulasi CFD. Project Report. UTeM, Melaka Malaysia. (Submitted)

Mohamad, Najmiah Radiah and Yusoff, S. A. S. and Salleh, Azahari and Hashim, Nik Mohd Zarifie and Yusop, Norbayah and Misran, Mohamad Harris (2014) An Initial Development Of Simple And Low-Cost Approach For Affordable Semi-Automatic Car. International Journal for Advance Research in Engineering and Technology, 2 (XI). pp. 1-5. ISSN 2320-6802

Mohamad Arif, Zainal (2008) Preliminary Study On Brake Squeal Noise For The Development Of Faulty Parts Indicator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ariff Shah, Mohamed Nazmi (2009) Conceptual Design And Development Of A Composite Drivetrain Differential Casing For Formula Student Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fahrurrofiq, Imam Fauzi (2012) Modelling And Validating Of Vehicle Longitudinal Dynamic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faizul Fadzly, Salehudin (2011) Performance Of Semi-Active Control Of Railway Vehicle Suspension. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Farhan, Zulkipli (2009) Study Of Energy Absorption Of Bicycle Safety Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Firdaus, Abdul Ghaffar (2010) Design And Development Of Carbon Fiber Suspension Push Rod For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hafiz, Mohamad (2010) Determination Of Aerodynamic Drag Force Acting On Moving Heavy Duty Truck-Trailer In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hafizi , Saari (2015) Design and structural analysis of rear suspension swing arm for air powered motorcycle (APM). Project Report. UTeM. (Submitted)

Mohamad Hazerul, Md Sehat (2015) UTeM FV Malaysia Racing Car Suspension Optimization Using Geometrical Optimization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Husyairi, Hasrin (2015) Modelling, Characterisation And Force Tracking Control Of A Magnetorheological Damper For Automotive Suspension. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ilham, Mazlan (2015) Mini Site Survey Using Drone And Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Nashrik, Suhaimy (2012) Development Of Automotive ECU And Ignition Wiring System Training Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shahril Ikhmal , Samsaimon (2015) Extended Electric Motorcycle Consumption And Range Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shahrul Amierul , Ramli (2015) Design and analysis of formula student racing car suspension system. Project Report. UTeM. (Submitted)

Mohammad Fajar, Sariman (2012) Merekabentuk Dan Fabrikasi Casis Kerangka Ruang Kereta Lumba Elektrik Formula Varsity UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Farkhan, Daem (2011) Ergonomics Study Of Cockpit Arrangement For UTeM Formula Varsity Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hafiz, Mohamad Elias (2008) The Effect Of Re-Artificial Aging Time On The Impact Toughness Of An Aluminum Alloy For Automotive Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Nizam, Shamsuddin (2010) Development Of Manual Transmission Powertrain Dynamic Model For Drive Simulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Qayyum , A. Shukor (2008) Normal Mode Analysis Of An Exhaust Pipe. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Ain , Kamaruddin (2009) Analisis Risiko Daripada Sudut Kualitatif Dan Kuantitatif Terhadap Teksi NGV. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amerrull, Ismail (2009) Aerodynamic Study On An Aircraft. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amin, Muhd Kamaruddin Pater (2009) Merekabentuk Sistem Stereng Depan Bagi Kereta Lumba Formula Pelajar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amirul , Awang (2009) Analysis And Simulation On Impact Collision Of Multi-Purpose Vehicle (MPV) As NGV. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Anuar, Omar (2011) Race Car Semi-Active Suspension Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aras, Mohd Shahrieel and Boon, Pei Teow and Ai, Kee Teoh and Pei, Kee Lee and Mohamed Kassim, Anuar and Harun, Mohamad Haniff and Mohd Zambri, Mohd Khairi and Khamis, Alias (2017) Evaluation And Analysis Of Pid And Fuzzy Control For AUV-YAW Control. Journal of Theoretical and Applied Information Technology, 95 (17). pp. 4256-4364. ISSN 1992-8645

Mohd Aras, Mohd Shahrieel and Mohd Zambri, Mohd Khairi and Ab Rashid, Mohd Zamzuri and Abdul Azis, Fadilah and Khamis, Alias (2015) Dynamic mathematical design and modelling of autonomous control of All-Terrain Vehicles (ATV) using system identification technique based on pitch and yaw stability. International Review of Automatic Control (IREACO), 8 (2). pp. 140-148. ISSN 1974-6059

Mohd Arif , Yaakub (2015) Improvement of ride quality for passenger vehicle using the magnetorheological damper. Project Report. UTeM. (Submitted)

Mohd Arizam , Abu Seman (2008) The Development Of Visual Indicator For Engine Maintenance In Cars. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Ashraf, Mohd Razali (2011) Vehicle Security Alert System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ashraff, Che Hashim (2009) Preliminary Study On Power Train System For Electric Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azarul Syazari , Che Aziz (2013) The effects of ice formation on airfoil performance. Project Report. UTeM, Melaka. (Submitted)

Mohd Azim, Ridzwan (2008) Design And Development Of An Automotive Seat For Safety. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizi, Abd Aziz (2006) Optimizing The Stiffness And Strength In Bumper Beam Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizi , Omar (2009) Mereka Bentuk Basikal Roda Tiga Hibrid Yang Dijanakan Oleh Dwitenaga Iaitu Tenaga Manusia Dan Tenaga Elektrik Untuk Kegunaan Di Bandar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizul, Hamzah (2011) An Experimental Study Of A Steering Wheel Vibration For UTeM Formula Varsity Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azlan, Mohd Akhir (2012) Investigation Of Parameter That Affecting Air Flow Around Vehicle Frontal Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azli, Salim (2012) Development Of Suppression System For Noise And Vibration In Automotive Flexible Wiper. Project Report. UTeM. (Submitted)

Mohd Azman, Abdullah (2005) Powertrain Engine Timing Gear Contact Analysis-Noise Analysis Using FEM. Masters thesis, Brunel University.

Mohd Azrol Hairomy , Mohd Nordin (2009) Eksperimen Analisis Ragaman Terhadap Kereta Penumpang Kompak Yang Menggunakan Tangki NGV. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Azwan , Arbaii (2007) Rekabentuk Dan Analisis Lengan Kawalan Sistem Gantungan Kereta Lumba Formula Universiti. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ezuwan, Kassim (2008) Designing And Analyzing Preliminary Parts Of An Aerostat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadhlan, Zahari (2008) Aerodynamic Investigation Of A Commercial Vehicle Using CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiezul, Johari (2009) A Comparison Study Of Standard Test Method For The Determination Of Flexural Property Of Glass Fiber Polyester Laminates. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fairus , Abdollah and Syed Najib , Syed Salim and Hairol Nizam, Mohd Shah and Irma Wani , Jamaludin (2011) Development Of An Automated Self-Parking System (ASPS) For An Automated Guided Vehicle (AGV) Via Intelligent Control Algorithms. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiz, Mat Zaid (2010) Aerodynamic Study Of Formula 1 In School For Mozac Racing Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizal, Halim (2008) Study The Failure Phenomenon On Proton Waja's Door Handle And Redesign The Model To Reduce Failure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizi, Abd Halim (2008) Design Of Low Cost 3 Digit Digital Tachometer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fareez, Mohd Afif (2013) Smart Parking System Using Wireless Connectivity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fareez Ibnor, Ibrahim (2011) Design And Analysis Of A Lightweight Clutch Disc For A Mini Farming Tractor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farhami , Ahmad Kamal (2015) Design and analysis of space frame chassis for formula students racing car. Project Report. UTeM. (Submitted)

Mohd Farhan, Alias (2008) Study On Chassis Vibration Induce By Power Train And Engine Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faridh , Samian (2010) Design Of Two Seated Three Wheel Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fariz Naim, Abdul Talib (2012) Basikal Elektrik Boleh Lipat Menggunakan Hab Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fidzrin, Mohd Hamizaz (2014) Vehicle Brake Light Detection Using Hybrid Color Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Handy (2011) Material Selection Of Cars Tire Based On Design For Sustainability Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Juhari (2015) Optimization Of The UTeM FV Malaysia Race Car Suspension System Design To Reduce Rolling Effect. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Zamri (2009) Design And Development Of Hybrid Composite Chassis For Formula Student Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Jaafar (2010) Automotive Air Conditioner Booster. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Jahar (2009) Design And Simulation Of Adaptive Cruise Control Using Matlab/Simulink. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Firdaus , Ab Razak (2009) A Study Of Aerodynamics For F1 In Schools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Abu Bakar (2010) Design And Development Of Ventilated Single Disc Brake Rotor For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fisol, Jusoh (2006) Design And Analysis Multi Purpose Vehicle (MPV) Chassis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fizree , Yaacob (2015) Design and analysis of chassis frame for single seated electric vehicle. Project Report. UTeM. (Submitted)

Mohd Hafes , Rosli (2015) Design and validation of army vehicle suspension system in longitudinal direction. Project Report. UTeM. (Submitted)

Mohd Hafidz, Zakaria (2009) The Development Of Composite Bodywork Of Nose Cone Panel For Formula Varsity Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafidz , Zakaria (2014) The development of active front wheel steering system. Masters thesis, UTeM.

Mohd Hafifi , Muhammad Hanafiah (2008) A Controller Design For An Expansion Valve. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz, Mohd Yaziz (2011) Simulation Of Front Impact On A Car Bumper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizi, Abdul Rahman (2009) Design And Development Of Composite Suspension Push Rod For Formula Student Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hanif, Md Yusuf (2009) Development Of Four Wheel Steering System For RC Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hanif, Harun (2008) Design An Active Suspension System For Peugeot 206. Other thesis, Coventry University.

Mohd Hanif, Harun and Khisbullah, Huda and Mohd Zakaria, Mohamad Nasir and Faizur Akmar, Abdul Kadir (2004) Position Tracking Control Of A Pneumatic Actuation System: Preliminary Design Of An Active Roll Control Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Haniff, Mohamed (2008) Merekabentuk Dan Menganalisis Go-Kart Berkuasa Bateri Bagi Tujuan Perlumbaan Formula Pelajar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hasbullah, Putra (2015) Design And Implementation Of Line Camera Based Lane Following Intelligent Vehicle Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hasrul Hafiidz , Mohd Zaid (2015) Design and fabricate suspension system for formula student racing car. Project Report. UTeM. (Submitted)

Mohd Hidayat , Ishak (2009) Merekabentuk Dan Menjalankan Simulasi Untuk Model Dynamic Headlamp Cornering Dan Merekabentuk Skematik Litar Elektrik Untuk Proses Pengajaran Dan Pembelajaran ( P&P). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hisham, Baharuddin (2009) The Effect Of Lean NOx Trap Catalyst On NO2 Removal From Diesel Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hudairee, Hasim (2015) Design And Analysis For FV Electric Vehicle Racing Car Chassis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Husharilamri , Husain (2008) Design And Development Of A Dual Acting Magnetically Activated Shock Absorber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Iskandar , Md Sulaiman (2010) Aquaculture control method for catfish fertilization system (web-based scada system). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Izamudin, Itam Ahmed (2010) Design And Development Of Carbon Fiber Double Wishbone Suspension Arm For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Izarin, Ishak (2011) Evaluation Of A Perodua Kancil Engine Mounting System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Izzati Izdihar , Ibrahim (2010) Design And Development Of Automotive Smart Tail Light System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kamarul Hafis, Abdul Aziz (2015) Effect Of Suspension Spring Stiffness On FV (Formula Varsity) Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khair, Salehan (2008) Design Of A Physical Model Of The Car Charging System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairir, Ismail (2010) Ergonomics Design And Analysis Of Bus Driver Seat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Azwan, Mamat (2010) Simulation Study Of Pitching And Rolling Control For Passanger Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Nizam, Suhaimin (2015) Suspension Development And Analysis Of Multipurpose Remote Controlled Powered Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairy, Abd Mutalib (2012) Development of Brush Lifting Gear for Slip Ring Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairy, Abd Mutalib (2012) Development of brush lifting gear for slip ring motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Muhyiddin, Mustafa (2010) Aerodynamic Perform of Aircraft Propeller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Mundzir Muzzammil, Mamat (2015) Design And Development Of Sport Utility Vehicle Dynamic Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Mustaqim, Othman (2012) Merekabentuk Dan Menganalisis Pancarongga Ekzos Seramik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Najib, Ab Rahman (2008) Reka Bentuk Prototaip Unit Penyejuk Bahan Api Petrol. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Najib, Idris (2010) Mechanism Design Of Magnetorheological Based Antilock Braking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasir, Faarih Farhan (2016) Development Of Compressed Air Powered Bicycle (CAPB) Using Linear Actuator (Pneumatic Cylinder). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasir, Muhamad Azidi (2016) The Development Of Directional Control And Wheel Synchronization Od Vehicle Steering By Wire (VSBW) System By Implementing Fuzzy PID Controller (FPC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasrul Azli, Mohd Aris (2010) Design Analysis Of Bearing For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nawari, Mat Sudin (2012) Merekabentuk Dan Menganalisis Casis Kenderaan Hijau Untuk UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nawawi, Mustafa (2009) The Effect Of Hole Plate On Automotive Waste Heat Extraction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nawawi, Abdul Rahman (2008) Vehicle Active Steering System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nazrilmizan, Mazlan (2005) Brakes Pads Wear And Tear Warning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nazrul, Othman (2012) Rekabentuk Dan Fabrikasi Sistem Stering Kereta Lumba Elektrik Formula Varsiti. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nizam, Sudin and Shamsul Anuar, Shamsudin and Mohd Zulkefli, Selamat and Tan, CheeFai (2005) Design And Analysis Of Polymeric-Based Composite Automotive Bumper Beam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Noor Asril, Saadun (2009) Preparation Of Catalytic Converter For Two Stroke Generator Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Noor Asril , Saadun (2009) Preparation Of Catalytic Converter For Two Stroke Generator Engine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Nor Fakurazy , Abu Bakar (2010) Intelligent Airship Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Norhisham, Ahmad Kamil (2006) Object Tracker Using Global Positioning System (GPS) And Radio Link. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Qayyum , Mohd Zulkifli (2015) Conceptual design and static analysis of chassis structure for air powered motorcycle (APM). Project Report. UTeM. (Submitted)

Mohd Rauf, Jamaludin (2010) Design Of Control System For Automatic Steering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Raus , Zainudin (2009) Aerodynamics Cooling Of Disc Brake Rotor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Razali, Shahrul Hafez (2008) Modelling And Simulation Of Engine Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rizal, Alkahari (2005) Effects Of Coatings On Quality And Mechanical Behaviour Of Self-Piercing Riveted (SPR) Joints. Masters thesis, University of Warwick.

Mohd Rushdan, Hamat@Hamad (2005) Analisis Tegasan Haba Ke Atas Brek Disc (Simulasi). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sabirin, Rahmat (2011) Design And Fabrication Of Engine Mounting For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sabirin, Rahmat (2015) Modelling, Simulation And Control Of A Series Hybrid Electric Vehicle. Masters thesis, Universiti Teknikal Malaysia Melaka..

Mohd Sabri, Mohamed Mokhtar (2009) Aerodynamic Optimization Of F1 Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Saiful Hakimi, Mat LWI (2006) Radiator Heat Dissipation Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Saleh, Mohamed (2007) Improvement Of Ride Quality Of Passenger Vehicle Using The Semi-Active Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sallehuddin , Salihin (2009) Auto Level Parking Model. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Salmizi, Mat Nor (2011) Semi Active Suspension System Design For Heavy Duty Truck. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Samsudin, Mat (2009) Design An Exhaust System For Formula Student Racing Car. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Saufi, Amran (2009) Studies And Design Of Carbon Fiber Monocoque Chassis For Formula SAE Racing Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shaarani, Mohd Hashim (2010) Design And Development Of Lightweight Chassis For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shafwan, Mohd Zahid (2009) Kajian Terhadap Sistem Suspensi Depan Bagi Kereta Lumba Formula Pelajar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahril , Ahmad Fauzi (2010) Design, Development And Test KR-150 Go-Kart. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sharedzal, Jonit (2006) The Potential Location Of Air Flow Around Car's Body In Generating Electricity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shazni , Halid (2013) Kenderaan Dua Alam UTeM : Analisa Pengendalian Dan Pemanduan. Project Report. UTeM, Melaka. (Submitted)

Mohd Shazwan, Mohd Zaki (2009) Analysis Of Multiaxial Force Acting On Stering Knuckle Of A Vehicle On Uneven Surfaces. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shukor, Hadran (2009) Conceptual Development Of Gear Braking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Suffian, Abdul Mues (2008) Magnetic Brake Design And Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syafiq, Mat Samuji (2009) Development Of Ergonomics Passenger Car Driver Seat Concept Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syafiq, Radzali (2009) Kajian Awal Tentang Sistem Rantaian Kuasa Untuk Kereta Elektrik Hibrid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syafiq Zaim, Azman (2009) Device For Road Vehicle Using Wireless Transmission Rotating Wheels. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syahar, Mohd Shawal (2006) Automotive Radiator Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syahir Asyraf, Mohammed Tahir (2010) Environmental Effect On Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syahrin Amri, Mohd Noh (2012) Real Time Study On Vehicle Tire Pressure. Project Report. UTeM. (Submitted)

Mohd Syahrizal , Basri (2007) Rekabentuk Dan Analisis Sistem Stering Bagi Kereta Lumba Formula. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syawal , Sulaiman (2013) Investigation of electric motorcycle performance in UTeM Kampus Induk. Project Report. UTeM, Melaka. (Submitted)

Mohd Syazwan Naim, Mohamad Basir (2012) Modeling And Controller Design For An Active Car Suspension System Using Quater Car Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Taha, Hanafi (2009) Analisis Risiko Daripada Sudut Kualitatif Dan Kuantitatif Terhadap NGV Pada Kereta Kompak. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Talha, Sofian (2008) Analisis Dan Fabrikasi Sistem Penyejukan Enjin Bagi Kegunaan Ujian Dinamometer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yamin, Ahmad Hafizal (2012) Car Accident Warning Flare. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusri , Ibrahim (2009) Analysis And Simulation On Impact Collision Of Compact Passenger Car As NGV. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Zaid , Akop (2007) An Investigation Of Disc Brake Rotor By Finite Element Analysis (FEA). Masters thesis, Coventry University.

Mohd Zakaria, Mohamad Nasir and Khisbullah , Hudha and Faizul Akmar , Abdul Kadir and Mohd Hanif, Harun and Ubaidillah, . (2005) Design And Development Of A Full Scale Shock Absorber Test Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zakaria, Mohammad Nasir and Khisbullah, Hudha and Faizul Akmar, Abdul Kadir and Mohd Hanif, Harun and Ubaidillah, . (2010) Design And Development Of A Magnetically Activated Engine Mounting System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zakaria, Mohammad Nasir (2006) Analysis of double wishbone suspension system components. Masters thesis, Conventry University.

Mohd Zakiran, Zulkiflee (2008) Design A Load Bearing Convertible Structure For Motorcycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zawavi, Zulkafli (2010) Development Of Recoiling And Reshapable Car Bumper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zhafran , Kamaludin (2011) Design, Development And Analysis Of HVACS System For Steering Wheel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zharif, Zakaria (2010) Mechanism Design Of Mr Brake For Formula Varsity Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zhilal, Mohd Faudzi (2009) Simulation And Experimental Evaluation On Sliding Mode Control For Pneumatically Actuated Active Suspension System Using Quarter Car Test Rig. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zubir, Amir (2009) Force Tracking Control Of Magneto-Rheological (MR) Damper Using PI Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zubir, Amir and Md Fahmi, Abd Samad (2016) Hardware-In-The-Loop Simulation Of Steer-By-Wire System In Automotive Vehicle. International Journal Of Advanced And Applied Sciences, 3 (9). pp. 51-58. ISSN 2313-626X

Mohd Zuhair, Zulkarnain (2012) Thermal Analysis Of Lighweight Clutch Disc. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zul Hazmi, Mhd Fauzy (2008) Finite Element Analysis Of Car Alloy Wheel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulfadli, Ahmad (2009) Mengkaji Kesan Pertambahan Cross Member Pada Nisbah Torsional Stiffness Terhadap Jisim Bagi Casis Kenderaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Faisal, Abdul Manas (2011) Design And Fabricate Chassis For Personal Electric Vehicle For UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Sa'ari, Mohamad Isa (2004) Rekabentuk dan Pembangunan Kalkulator Bergraf untuk Misi ke Marikh. PhD thesis, Universiti Kebangsaan Malaysia.

Mohiddeen, Iddin (2015) Design And Validation Of Army Vehicle Suspension Systems In Lateral Direction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mokhtar, Nur Hazwani (2017) Driver Recognition And Reaction To Unintended Acceleration. PhD thesis, Universiti Teknikal Malaysia Melaka.

Moo, Yi Shan (2012) A Study On Independent Wheel Railway Bogie. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad, Manap (2009) An Aerodynamics Study Of Body Work Of Formula Student Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Afnan , Mohd Aris (2015) Comparative performance of single speed and continuous variable transmission (CVT) for air powered motorcycle (APM). Project Report. UTeM. (Submitted)

Muhamad Arif Fahmi, Abdul Wahab (2009) Design Of Test Rig For Bending And Torsion Of Vehicle Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Azwan, Aziz (2015) Design And Analysis Of Low Cost Shock Absorber Test Rig For Suspension Parameter Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Faiz , Abu Hassan (2009) Automatic Parking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Farhan, Fadzilah Husani (2012) Design And Fabricate For Knuckle Racing Electric Car With High Performance And Realibility. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Hanif Subhi, Mohd Rashid (2011) Experimental Study On The Motorcycle Helment Microclimate Heat Distribution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Hazwan, Mohd Zahri (2011) Design And Analysis Of A Lightweight Clutch Disc For A Single Seated Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Khairi, Aripin and Y.M, Sam and Kumeresan, A.D and Kemao , Peng and Mohd Hanif , Che Hasan and Muhamad Fahezal, Ismail (2013) A Yaw Rate Tracking Control of Active Front Steering System Using Composite Nonlinear Feedback. In: Asiasim 2013. Communications in Computer and Information Science, 402 . Springer Berlin Heidelberg, pp. 231-242. ISBN 978-3-642-45036-5

Muhamad Khairi, Aripin and Yahaya, Md. Sam and Kumeresan, A.D and Kemao , Peng and Norhazimi , Hamzah and Muhamad Fahezal, Ismail (2014) A Review of Active Yaw Control System for Vehicle Handling and Stability Enhancement. International Journal of Vehicular Technology, 2014. pp. 1-15. ISSN 1687-5710

Muhamad Sahail, Zainol Abidin (2011) Design And Development Of A Bell Crank For Monoshock Front Suspension For Formula Varsity Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Saiful, Abu Bakar (2006) Belt Stretch Measurement In Relation To Speed. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Suffian Effendi, Md Yusuf (2010) Simulation Study On Active Seat Suspension For A Passenger Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Suhaidi , Samsudin (2015) Design and analysis of suspension system for extreme buggy. Project Report. UTeM. (Submitted)

Muhamad Syahriman, Yahya (2015) Redesign motorcycle transmission with reverse gear. Project Report. UTeM. (Submitted)

Muhamad Tarmizi , Adnan (2013) Vehicle collision detector (vcd). Project Report. UTeM. (Submitted)

Muhammad, Abdullah (2009) Kawalan Iklim Dalam Satu Ruang Tertutup. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aizat, Md Alias (2015) Development Of Airflow Sensor System Towards Air Intake Filter In 1000cc Car Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aizuddin, Abd Aziz (2010) The Design Of Mechanism Mechanical Ventilation System Using Solar System For Car Below The Sunlight. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aizuddin, Osman (2011) Design And Fabricate A Brake System For UTeM Personal Electric Vehicle (PEV). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Amin, Dzulkifli (2012) Engine Performance And Emission Level Investigation Of Vehicle Running With Different Types Of RON Fuel Grades And Fuel Brands. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Amir Lufti, Radzali (2013) Development Of Single-Wheeled Balancing Scooter. Project Report. UTeM, Melaka. (Submitted)

Muhammad Arif, Kamalruzaman (2015) The Study Of Effect Of Engine Oil Viscosity On Engine Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Arif, Ramli (2015) Recharging Of Flywheel Hybrid Module Through Acceleration Phase. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Asyraf, Zulkefli (2012) Kenderaan Hijau PDRM : Ride And Handling Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Bukhari, Baharuddin (2015) Co2 Capture From Exhaust Gas To Improve Fuel Economy In Single Cylinder Diesel Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Danial Asyraf , Zahari (2013) Merekabentuk Dan Menguji Radiator Automotif Berbentuk Bulat. Project Report. UTeM, Melaka. (Submitted)

Muhammad Fadhil , Ismail (2015) Design and fabrication of chassis frame for formula student racing car. Project Report. UTeM. (Submitted)

Muhammad Fahmi , Md Isa (2013) Rekabentuk Dan Fabrikasi Sistem Stering Dan Brek Kenderaan Dua Alam UTeM. Project Report. UTeM, Melaka. (Submitted)

Muhammad Faiz, Jansar (2010) Design And Development Braking System For Patrol Mobility Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faiz, Abdul Salim (2010) Simulation Evaluation Of Magnetorheological Brake Based On Anti-Lock Braking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faridhwan, Shofri (2015) Novel Conceptual Design And Simulation Of Rear Pressure Different Air Flow Correction Device Using Computational Fluid Dynamic (CFD) Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hafiz, Ahmad Sohan (2008) Effect Of External Agent In The Control Of Vehicle Tyre Pressure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hafiz , Abd Rahim (2013) Flow modelling of simplified human nasal cavity by using Computational Fluid Dynamics (CFD). Project Report. UTeM, Melaka. (Submitted)

Muhammad Hafiz , Mohamed Yunus (2015) Self-driving toy car. Project Report. UTeM. (Submitted)

Muhammad Hafizullah , Ashari (2011) Design and Fabrication of Space Frame Chassis For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hanif, Mohd Zanani (2012) Design And Development Of Recreational Human Powered Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hasnan , Abd Ghani (2007) Efficiency Energy Storage, From Kinetic Energy To Electric Potential Energy. Project Report. UTeM, Melaka. (Submitted)

Muhammad Hatta, Anuar (2009) Design And Analysis Composite Car Bumper Using CAD And CAE. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hazwan , Md Jamal (2011) Design And Analysis Personal Electric Vehicle For UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hijlal, Jamalulil (2015) Experimental Study (Comparison) Of Engine Rubber Mounting’s Vibration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Idris, Sulaiman (2015) Power Source Management System Of Electric Vehicle Racing Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ikhtiaruddin, Afandi (2012) Merekabentuk Dan Membangunkan Struktur Kerangka Skuter Imbangan Elektrik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ikram, Mohd Zain (2009) Design Optimization For Automotive Wiper Retractor System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Jura'aid, Abu Bakar (2008) Motorized Spoiler To Help To Stop Car Faster. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Khairil Anwar, Idris (2015) Optimization Of Aerodynamic Package For Formula Varsity Racing Car To Reduce Drag Force Using CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Luqman Hakim, Abd Rahman (2009) Simulation And Experimental Investigation On Semi Active Suspension System With Skyhook, Groundhook, And Hybrid Controllers. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Luqman Hakim, Abd Rahman (2015) Development Of A Novel Electronically Controlled Wedge Braking System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Muhammad Nazim , Mohd Bashir (2015) Design and analysis of pitching and rolling control for passenger car. Project Report. UTeM. (Submitted)

Muhammad Nazir , Mat Isa (2009) Smart Parking System Using Labview. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Norsyafiq , Md Nasib (2015) Conceptual design and performance analysis of the air motor for air powered motorcycle. Project Report. UTeM. (Submitted)

Muhammad Nur, Othman and Mohd Shahrieel, Mohd Aras and Fadilah, Abd Azis and Ahmad Nizam, Jamaludin and Mohd Faruq, Abdul Latif (2013) Design A Novel Thruster Magnetism Motor (TMM) For Underwater Vehicle Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nuruddin , Yahya (2007) State Space Approach For Controlling 1-Dof Vehicle Active Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ramdan, Mat Ali (2015) Extended Electric Motorcycle Battery Mount Design, Analysis And Installation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ridhwan, Mad Ali (2011) Efficiency of Mini Type Shell Heat Exchanger For Car Air Conditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Safuan, Md Salleh (2015) Design And Assembly Analysis Of Differential Gear Box For UTeM FV Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Shukri , Ahmad Azazi (2013) Design Optimization Study On The Formula Varsity Car Chassis. Project Report. UTeM, Melaka. (Submitted)

Muhammad Syafiq, Abdul Malik (2011) Design Concept Selection Of Automative Bumper Fascia Using Analytical Hierarchy Process (AHP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syameel, Zanal (2015) Improvement of commercial vehicle suspension system using MR damper. Project Report. UTeM. (Submitted)

Muhammad Syukri, Abdul Latib (2010) Mechanism Design Of Active Geometry Control Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syukri, Ismail (2010) Design Optimization For The Active Bumper System Test Rig. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Taufik, Abdul Aziz (2012) Electronics Stability Program (ESP) Of The Automotive Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Taufiq, Abdul Khalid (2011) An Experimental Study Of Steering Wheel Vibration In Static Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Yazid, Hasnan (2011) Simulation Of Air Flow Around Vehicle Front Windscreen. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Yusri , Md Yusuf (2013) Effect of stanum on the properties of graphite-stanum composite for bipolar plate. Project Report. UTeM. (Submitted)

Muhammad Zahir, Hassan (2004) Brake Disc Performance: Finite Element Analysis. Masters thesis, Coventry University.

Muhammad Zahir, Hassan (2009) Thermal Deformation Analysis Of Automotive Disc Brake Squeal. PhD thesis, University of Leeds.

Muhammad Zaidan , Abdul Manaf (2013) Pembangunan sistem pendorongan kenderaan hibrid dua alam untuk operasi penyelamat marin (Development of hybrid amphibious vehicle propulsion system for marine safety and rescue operation). Other thesis, UTeM.

Muhammad Zulhakim, Sharudin (2013) Contaminant removal for different geometry of cavities with high Reynolds number using fluent. Project Report. UTeM, Melaka. (Submitted)

Muhd Amirul Zulhilmi , Mohd Saru (2015) Design and analysis a lightweight knuckle for improving the formula student racing car. Project Report. UTeM. (Submitted)

Muhd Firdaus, Md. Tahir (2008) Redesign Of A Cradle For Aircraft Maintenance Using Ergonomics Analysis And Quality Function Deployment (QFD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Muslim, Abu Bakar (2009) Development Of A Side-Pot Body Panel For A Formula Student Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Ridzuan, Mansor (2009) Development of Double Wishbone Composite Suspension System for Formula Student Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Ridzuan, Mansor and Nurfaizey, Abdul Hamid and Mohd Zaid, Akop and Mohd Afzanizam, Mohd Rosli and Mad Nasir, Ngadiman and Mohd Syakir, Mohtarudin and Habirafidi, Ramli (2008) Development Of Composite Body Panels For Formula Student Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Syafiq, Mohd Yusof (2010) Performance Test Of Electric And Electro-Hydraulic Parking Brake. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhsin , Abdul Razak (2009) Development Of Double Wishbone Suspension Using Glass Fiber Reinforced Polymer (GFRP) For Formula Student Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Munir, F.A and M. Azmi, M.Irwan and M. Zin, Mohd Rody and Salim, M.A and Hassan, Muhammad Zahir (2011) Preliminary design of carbon composite facing for dry clutch disc of mini agricultural tractor. International Review of Mechanical Engineering, 5 (4). pp. 577-580. ISSN 1970-8734

Murugesan , Sulakhsheme (2016) 77 GHz Antenna For Automotive Radar Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustaffa Albakri, Ammar Alfaiz and Hassan, Muhammad Zahir and Mohd Tahir, Musthafah and Rusnandi, Herdy and Mohd Adrinata, Shaharuzaman and Mansor, Muhd Ridzuan (2012) Design and Development of UTeM Perodua Eco-challenge Vehicle. Applied Mechanics and Materials, 165. pp. 202-208. ISSN 1660-9336

Musthafah, Mohd Tahir and Salim, M.A. and Herawan, Safarudin Gazali and Bakar, R.A. (2014) Feasibility Study for Energy Recovery from Internal Combustion Engine's Waste Heat. International Review of Mechanical Engineering, 8 (1). pp. 223-227. ISSN 1970-8734

Musthafah, Mohd Tahir and Ali, Muhammad Syahir and Mohd Shafie, Abdul Muhaimin and Bakar, R.A. (2014) Simulation of Single Cylinder Engine Fuel with Alternative Fuel by Using Available Software. International Review of Mechanical Engineering, 8 (4). pp. 798-802. ISSN 1970-8734

Musthafah, Mohd Tahir and Mohd Shafie, Abdul Muhaimin and Ali, Muhammad Syahir and Yusmady, Mohamed Arifin and Abu Bakar, Rosli (2014) INTAKE ANALYSIS ON FOUR-STROKE ENGINE USING CFD. In: International Conference on Automotive Innovation and Green Energy Vehicle 2014, 26 -27 August 2014, Swiss Garden Resort & Spa, Kuantan, Pahang. (Submitted)

Musyriff, Mustafa (2010) Foldable Electric Bicycle Using Hub Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

N

Nadhira Fathiah, Kamarulzaman (2015) Performance Comparison Between CNG And Petrol Fuel In Internal Combustion Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasrul Hakim , Khalid (2010) Air Flow Distribution Of A Fan Using CFD Method. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Naurah Jasmin , Sahid (2015) Analysis of the car ventilation system and enhancement using solar power. Project Report. UTeM. (Submitted)

Nazrul , Mohamed Asru (2009) Merekabentuk Sistem Pengudaraan Efektif Kereta Yang Sedang Diletakkan Di Tempat Letak Kereta Tanpa Bumbung. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Neilson, Peter Sorimpuk (2010) Design And Development Of Remote Controlcar Starter System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Ai Xin (2016) Design And Development Of Broader Viewing Angle Device For Motorcyclist To Improve Safety. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, , Eng Sia (2007) High Flexibility Multi Terrain Rover. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Nidzamuddin, Md Yusof and Juffrizal, Karjanto and Mastura, Mohammad Taha and Muhammad Zulfattah, Zakaria and Muhammad Nur, Othman (2014) The Development Of Hydrogen Cell For Petrol-Powered Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Isna Zulkarnain , Nik Iskandar Ariff (2015) Improvement of automotive engine vibration using semi active engine mount system. Project Report. UTeM. (Submitted)

Noor Asmidar, Ismail Affendee (2008) Design Optimization Of Hollow Beam For The Car Side Door Impact Beam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azam, Ahmad Faiz and Jidin, Auzani and Ngatiman, Nor Azazi and Jopri, M.H and Manap, Mustafa and Lukar Herlino, Adeline and Alias, Nor Faezah (2013) Current Control of BLDC Drives for EV Application. In: IEEE International Power Engineering and Optimization Conference 2013 (PEOCO 2013), 3-4 June 2013, Langkawi, Malaysia.

Noor Azreen , Hamzah (2015) Design and analysis of space frame chassis for solar car challenge. Project Report. UTeM. (Submitted)

Noor Faridah , Amat (2012) Smart Bicycle Rider Coach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Hafizee, Badardin (2006) KUTKM Vehicle Maintenance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Hashemy , Musa (2007) Modeling And Simulation Of A Heavy Vehicle. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Nooranith Shazni , Khairul Azuar (2013) Prototyping A Miniature Airborne Robot. Project Report. UTeM, Melaka. (Submitted)

Noorlydiana, Hussain (2009) Study Of Evaluation Of Drag Acting On The Truck Trailer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Adilia , Abd Latif (2012) Curves And Surface Modeling : A Case Of Truck Wind Deflector Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Fadhlina, Ab Razak (2009) Alternative Material For Motorcycle Brake Pedal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Farah Hidayah , Badul Zaman (2010) Parking Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Fariha, Sohod (2013) Thermal Behavior Of Natural Fiber Mat Hybrid Composite For Tooling Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazam, Jamel (2008) Computer Aided Ergonomics Design Analysis In Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazhafidz Aizat, Ahmad Ghazali (2011) Design And Analysis An Efficient Lightweight Brake Disc For A Single Seated Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazira, Jani (2015) Design, Simulation And Analysis Of Disc Rotor Using Anycasting Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazli , Borhan (2009) Kesan Parameter Liang Ekzos Ke Atas Janaan Kuasa Bagi Enjin Dua Lejang. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Norfadzlin , Mohd Sani (2011) Digital Parking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhisyam, Mustapha (2005) Kajian Kehilangan Halaju Bagi Continuosly Variable Tranmission (CVT) Jenis Talisawat Getah Bentuk-V. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norirman , Mansor (2007) Kesan Aerodinamik Pada Struktur Sokongan A (A-Pillar). Project Report. Melaka, Malaysia, UTeM. (Submitted)

Norizal , Arshad (2008) Menganalisa Kerosakan Penyerap Shimmy (Shimmy Damper) Terhadap Unit Pendaratan Pesawat Ringan (Model : Eagle 150B). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norman Jeff, Muntok (2009) Engine Performance Test On Ngv Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur 'Afwa, Mohd Taufik (2006) Periodic Vehicle Service Maintenance System For Swedish Motor Assemblies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Akhmar, Parlam (2010) Study Of Belt Stretch In Relation To Rotational Speed. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Amin , Abdul Wahid (2009) Steering Control For A Car Using Fuzzy Logic Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Atiqah, Shahari (2012) Simulation Of Air Flow Around A Vehicle Side Mirror. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Ezrin , Mad Sariff (2008) Design And Analysis Of Car Side Door Impact Beam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Farah Nabilah, Md Yusof (2015) The influencing factors that enhance the intention of use of electric cars in Malaysia. Project Report. UTeM. (Submitted)

Nur Fasiha, Nazirmuidin (2010) Study Of Heat Exchanger Effect In A Car Air Conditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hayatie, Ismail (2005) Analisis Tegasan Haba Terhadap Brek Shoe (Simulasi). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hidayah, Kamal Azhar (2006) JPJ Driving Test For Illiterate Candidate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Izan Syahriah, Hussein (2010) Direct Metal Deposition Of Waspaloy Wire Using Laser And Arc Heat Sources. PhD thesis, University of Nottingham.

Nur Izrin, Mahyon (2010) Aerodynamic Study Of Proton Exora Using Computational Fluid Dynamic (CFD) Fluent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Izzatul Hani , Md Nasir (2015) Improvement of anti roll bar for rollover prevention in automotive application. Project Report. UTeM. (Submitted)

Nur Shuhada, Yusoff (2006) Optimizing HVAC System Using Vehicle Passenger Thermal Comfort Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Syaheddatul Saqinah, Sukirman (2006) Car Suspension Modeling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurain Shyafina, Ab Latif (2012) Kajian Penjanaan Semula Tenaga Melalui Sistem Suspensi Kenderaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurfaizey , Abdul Hamid (2007) The design of light weight automotive brake pedal. Masters thesis, Coventry University.

Nurfarahin Najwa, Mohd Razak (2015) Efficient planned maintenance system for automobiles engine by means of oil based condition monitoring - a case study of UTeM student bus. Project Report. UTeM. (Submitted)

Nurhafizah, Ismail (2013) Analisis Dinamik Kereta Lumba "Formula Varsity 2012". Project Report. UTeM, Melaka. (Submitted)

Nurliyana , Baharin (2014) Strategies to manage the impact of high PHEV penetration to the grid. Masters thesis, UTeM.

Nurul Huda, Jamil (2009) Steering Control For Bicycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Mastura, Romli (2006) Effectiveness In Cooling Of Cyclist's Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Nabilah , Nordin (2015) The factors that influence in the technology transportation (LAND VEHICLE) to the environment. Project Report. UTeM. (Submitted)

Nurulhuda, Khalid (2005) Thermal Stress Analysis On Brake Drum (Simulation). Project Report. UTeM, Melaka, Malaysia. (Submitted)

O

Omar, Rozani (2011) Design And Fabricate Propulsion System Of UTeM Personal Electric Vehicle (PEV). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Ching keat (2011) Design And Development Of 3-Dof Motion Rlatform For Vehicle Simulator. Project Report. UTeM, Melaka Malaysia. (Submitted)

Ooi, Chin Pow (2015) Head-Up Display (HUD) Interface Design For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Oon , Kar Weng (2008) Fuzzy Logic Controller For An Autonomus Parallel Self- Parking System Using Labview. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Othman, Rahman (2015) Optimizing The Race Car Dynamics And Performance On Virtual Race Track. Project Report. UTeM, Melaka, Malaysia. (Submitted)

P

Phua, Chun Haw (2015) Optimisation Of Magnetorheological Damper Test Rig For Automotive Suspension. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Phuman Singh, A.S. and Hassan, Muhammad Zahir (2012) A parallel study of vibration analysis and acoustic analysis in low frequency brake noise. In: 4th International Conference on Noise, Vibration and Sound, 26-28 November 2012, Kuala Lumpur.

Phuman Singh, A.S. and Mat Darus, I.Z. (2014) Active roll control strategy using fuzzy logic control active suspension. WSEAS transactions on systems and control, 9. pp. 566-573. ISSN 2224-2856

Porter, Sophie and Mat Yamin, Ahmad Kamal and Aleksandrova, Svetlana and Benjamin, Stephen and Roberts, Carol A and Saul, Jonathan (2014) An Assessment of CFD Applied to Steady Flow in a Planar Diffuser Upstream of an Automotive Catalyst Monolith. SAE International Journal of Engines, 7 (4). pp. 1697-1704. ISSN 1946-3936

R

Rafika, Buang (2013) A Critical Evaluation Of The Probable Causes Of Musculoskeletal Disorders Among Workers In Aerospace Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rafis Suizwan, Ismail / Hussain (2007) CFD Simulation And Subsonic Wind Tunnel Testing On A Model Of Mitsubishi Evolution 6. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Raguvaran , Jayahkudy (2006) An Aerodynamic Study On MPV Spoiler. Project Report. UTeM, Melaka. (Submitted)

Rahmat, Mohd Sabirin and Ahmad, Fauzi and Mat Yamin, Ahmad Kamal and Aparow, Vimal Rau and Tamaldin, Noreffendy (2013) Modelling and Torque Tracking Control of Permanent Magnet Synchronous Motor For Hybrid Electric Vehicles. International Journal of Automotive and Mechanical Engineering , 7. pp. 955-967. ISSN 2229-8649 (Print); 2180-1606 (Online)

Rahmat, Mohd Sabirin and Ahmad, Fauzi and Mat Yamin, Ahmad Kamal and Tamaldin, Noreffendy and Aparow, Vimal Rau and Jamaludin, Hishamuddin (2016) Simulation of Hybrid Electric Vehicle based on a Series Drive Train Layout. Jurnal Teknologi, UTM, 78 (6). pp. 211-221. ISSN 0127-9696

Raja Noorzihan, Raja Ab Kadir (2009) Kajian Terhadap Sistem Suspensi Belakang Bagi Kereta Lumba Formula Pelajar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raphael, Stephen (2008) Tempat Duduk Keselamatan Kereta Kanak-Kanak. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raven, Lachimanan (2010) The Evaluation Study Of Noise And Vibration In Flexible Wiper System Using Analytical Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razali, Muhammad Zuhaili and Abdullah, Abdul Rahim and Wan Mohamed, Wan Ahmad Najmi and Ahmad Khiar, Mohd Shahril (2016) Hydrogen Inlet Pressures Parameter Analysis Of Proton Exchange Membrane Fuel Cell (PEMFC) Using Spectrogram. ARPN Journal Of Engineering And Applied Sciences, 11 (6). pp. 3875-3882. ISSN 1819-6608

Razlan, Razali (2015) Design, Analysis And Fabrication Of Regenerative Automotive Suspension System Test RIG Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Renggie, Rudelle Roland (2008) Design Of An Expansion Chamber For Power Tuning Of A Two Stroke Engine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ridzuan, Mohd Rasyidi (2016) Active Suspension Control Using Multiorder PID Controller. Masters thesis, Universiti Teknikal Malaysia Melaka.

Riezan , Bohari (2007) Automated Guided Electric Vehicle. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Rodzman Rozimi, Radzi (2011) Numerical Study On The Motorcycle Helmet Microclimate Heat Distribution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rodzman Rozimi, Radzi (2011) Numerical Study On The Motorcycle Helmet Microclimate Heat Distribution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosley, Mohammad Nazry and Tamaldin, Noreffendy and Abdollah, Mohd Fadzli and Zakaria, Muhammad Zulfattah and Mat Yamin, Ahmad Kamal (2016) Emission Characteristics of Hydrogen Enrichment in Light Duty Single Cylinder Diesel Engine. In: The 4th International Conference on Engineering and ICT (ICEI 2016), 4 April 2016 - 6 April 2016, Hatten Hotel Melaka. (Submitted)

Roslina Aida, Rahimi (2008) CFD Simulation And Validation Of Aerodynamic Over Ahmed Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ruseli, Kien (2009) Thermal Stress Analysis On Heavy Truck Disc Brake Rotor Using Finite Element Analysis (ABAQUS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ruzaidi , Razali (2015) Validation and improvement of 14-DOF ride and handling model for passenger vehicle (electronic resource). Project Report. UTeM. (Submitted)

Ruzanna Nadia, Nisah (2009) Finite Element Analysis Of A Motorcycle Alloy Wheel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

S

Safarudin Gazali, Herawan (2011) Development Of Electrical Scooter For Green Campus, In Case Par Dispatch Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Safarudin Gazali, Herawan (2011) The Effect Of Gear Ratio On Turbo Alternator To Produce Higher Power Generation In The Spark Ignition Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Safiuddin Azri , Mhd Hassan Zaini (2015) Determination of suitable routing protocol based on network analysis with different scenarios. Project Report. UTeM. (Submitted)

Sahariman, Muhd Afif Zulhilmi (2015) An Alternative Static Green Technology Generator For Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saiful Azhar, Che Pa (2010) Design And Development Of The Tricycle For Agriculture Sector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salleh, Zulhisyam and Sulaiman , Marizan and Omar, Rosli and Patakor, Fizatul Aini (2017) Optimization Of Fuzzy Logic Based For Vector Control Induction Motor Drives. Ieee Xplore. pp. 1-6. ISSN -

Sariman, Mohamad Zaharudin (2016) Modelling And Control Of A Semi-Active Magnetorheological Damper For Engine Mounting Systems. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sariman, Mohamad Zaharudin and Harun, Mohamad Hafiz and Ahmad, Fauzi and Md Yunos, Mohd Razali and Mat Yamin, Ahmad Kamal (2015) Vibration Control of a Passenger Car Engine Compartment Model using Passive Mounts Systems. Journal of Engineering and Applied Sciences, 10 (17). pp. 7472-7476. ISSN 1816-949X

Sariman, Mohamad Zaharudin and Harun, Mohamad Hafiz and Mat Yamin, Ahmad Kamal and Ahmad, Fauzi and Md Yunos, Mohd Razali (2015) Magnetorheological Fluid Engine Mounts: A Review on Structure Design of Semi Active Engine Mounting. International Journal of Materials, 2. pp. 6-16. ISSN 2313-0555

Sasitharan , Yellapan (2013) Development Of Brake System For Reduced Scale Vehicle. Project Report. UTeM, Melaka. (Submitted)

Satchiaanandhan, Subramaniam (2011) Aerodynamics Study Of A Passenger Car Spoiler In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saul, Jonathan and Porters, Sophie and Mat Yamin, Ahmad Kamal and Medina, Humberto and Aleksandrova, Svetlana and Benjamin, Stephen (2015) Influence of cyclic variance on The Performance of URANS for Pulsating Flow upstream of an Automotive Catalyst Monolith. In: IMechE internal Combustion Engines 2015, 02 December 2015 - 03 December 2015, Royal College of Physicians, London.

Sawita, Amir (2012) Effect On Mechanical And Physical Properties Of Cotton Fiber In Hybrid Laminated Composite For hard Panel Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Selveraj, Subramaniam (2008) Design And Development Of An Automatic Wiper Retractor System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Seri Rahayu , Kamat and Norhidayah, Hashim (2013) A study on muscle fatigue associated with awkward posture among workers in aerospace industry. Advanced Engineering Forum, 10 (1). pp. 287-292. ISSN 103.26.74.254-27/05/14,09:25:29

Shafizal, Mat and Faizil, Wasbari and Mohd Firdaus, Sukri (2010) The Effect of Lean NOx TRAP (LNT) Catalyst On ON2 Removal From Diesel Exhaust Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shafizal , Mat (2007) The effect of lean NOx trap catalyst on NO2 removal from diesel engine. Masters thesis, Coventry University.

Shahrul Izzat , Hamid (2010) Experimental Validation Of Aftermarket Fuel Saving Device (Air Boom). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shawaluddin, Shah Fathi (2011) A Safety Design Of Aerospace Vehicle Using Numerical Analysis. Project Report. UTeM, Melaka. (Submitted)

Shazizi, Mustafa (2013) User Interface Assessment Of Car Dashboards. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sisu Arman, Amir (2008) Development Of Quarter Car Test Rig For Vehicle Ride Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Aishah , Zulkefli (2009) Active Car Steering Using Sliding Mode Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Aminah, Samsuddin (2012) Optimization Of Vehicle Steering Wheel In Active Steering System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Fatimah , Abait (2014) Jute/glass reinforced polyester resin laminated composite by compressive moulding : mechanical properties based on different stacking sequence and surface treatment. Masters thesis, UTeM.

Siti Nurul Haiza, Mahmud (2009) Improvement Of Strength And Formability Of Aluminum Alloy Sheet By Artificial Aging Treatment (Application For Car Body Panel). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Soliah, Selamat (2012) Modeling And Design Of An Active Car Suspension System Using Half Car Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sivarao Subramonian (2012) AN AUTOMATIC TYRE INFLATING SYSTEM (ATIS). PI 2012002727.

Sivarao Subramonian (2012) HYDRO-GAS AIRLESS TYRE (HAT). PI 2012701286.

Sivarao Subramonian (2012) MAGNETIC AIRLESS TYRE (MAT). PI 2012701282.

Sivarao Subramonian (2012) A TYRE PRESSURE SUSTAINING SYSTEM (T-PreSS). PI 2012002728.

Sophie, Porter and Mat Yamin, Ahmad Kamal and Svetlana, Aleksandrova and Stephen, Benjamin and Carol, A. Roberts and Jonathan, Saul (2014) An Assessment Of Cfd Applied To Steady Flow In A Planar Diffuser Upstream Of An Automotive Catalyst Monolith. SAE International Journal of Engines, 7 (-). pp. 8-15. ISSN 1946-3936

Sudin, Mohd Nizam and ABDULLAH, Mohd Azman and Ramli, Faiz Redza and Musthafah, Mohd Tahir and Shamsudin, Shamsul Anuar (2014) Review of Research on Vehicles Aerodynamic Drag Reduction Methods. International Journal of Mechanical and Mechatronics Engineering, 14 (2). pp. 35-47. ISSN 2077-124X

Suhaila, Mat Said (2010) Modeling Study Of A Gas Turbine Burner Cooling Ring Efficiency In A Model Combuster Exit Duct. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sukri, Mohamad Firdaus (2017) Simulation And Analysis Of A Direct Current Operated Automotive Air-Conditioning System. PhD thesis, Universiti Teknikal Malaysia Melaka.

Suthan, Erin (2009) The Analysis Of The Forces That Act On The Motorcycle Brake Pedal During Emergency Brake. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sutikno, Tole and Jidin, Auzani and Basar, Mohd Farriz (2010) Simple Realization of 5-Segment Discontinuous SVPWM Based on FPGA. International Journal of Computer and Electrical Engineering, 2 (1). pp. 148-157. ISSN 1793-8198

Sutikno, Tole and Jidin, Auzani and Jidin, Aiman Zakwan and Nik Idris, Nik rumzi (2011) FPGA Based High Performance Torque and Flux Estimator. International Review of Electrical Engineering (IREE), 6 (1). pp. 207-214. ISSN 1827- 6660

Sutikno, Tole and Jidin, Auzani and Nik Idris, Nik Rumzi (2010) New approach FPGA-based implementation of discontinuous SVPWM. Turkish Journal of Electrical Engineering and Computer Sciences, 18 (4). pp. 499-514. ISSN 1300-0632

Sutikno, Tole and Jidin, Auzani and Wong, Jenn Hwa and Nik Idris, Nik Rumzi (2010) A Simple Approach of Space-vector Pulse Width Modulation Realization Based on Field Programmable Gate Array. Electric Power Components and Systems, 38. pp. 1546-1557. ISSN 1532-5008

Sutikno , Tole and Jidin, Auzani and Nik Idris, Nik Rumzi (2011) A New Fixed Switching Frequency Direct Torque Controlled PMSM Drives with Low Ripple in Flux and Torque. ITB Journal, 43 (3). pp. 173-190. ISSN 1978-3051

Syafiq, Zamsari (2015) Design And Analysis Of Automotive Suspension System Using Semi-Active Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syazana, Sapie (2010) Half Car Active Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Anuar, Syed Muzzamil (2008) Rekabentuk Kombinasi Kerusi Keselamatan Kanak-Kanak Dengan Kerusi Kereta. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Muhammad Alif, Syed Ahmad Ruslan (2015) Predictive Tools For The FV Racing Car Disc Brake Squeal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Putra, Syed Ammar (2009) Analysis Of The Reliability Of Power Window System For Sedan Cars. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sylvester, Sulip (2015) Extended Hybrid Electric Motorcycle Motor Mount Design, Analysis And Installation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

shariff, zulkifli (2007) Innosat konsep pembangunan, penaksiran risiko, analisa keupayaan daya kebolehtahanan meter-pecut, rate-giro dan pemproses sistem kawalan penentu attitud (ADCS) bagi inertia measurement unit (IMU). Masters thesis, Universiti Kebangsaan Malaysia.

syed mohamed, muhammad syafiq (2014) Kansei Engineering Implementation on Car Center Stack Designs. International Journal of Education and Research , 2 (4). pp. 355-366. ISSN 2201-6740

T

T., Joseph Sahaya Anand (2012) NICKEL AS AN ALTERNATIVE AUTOMOTIVE BODY MATERIALS. Journal of Mechanical Engineering and Sciences, 2. pp. 187-197. ISSN 2231-8380

Tai, Weng Hao (2016) Cross Wind Detection For Direction And Speed Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tamaldin, Noreffendy (2010) Experimental Investigation of Emission from a Light Duty Diesel Engine Utilizing Urea Spray SCR system. PhD thesis, Coventry University.

Tamaldin, Noreffendy (2010) Experimental study of SCR in a light-duty diesel exhaust to provide data for validation of a CFD model using the porous medium approach. SAE 2010 World Congress & Exhibition, April 2010, Detroit, MI, USA, Session: Diesel Exhaust Emission Control: SCR (Part 3 of 3) (2010-01-1177).

Tan, Chee Fai and Mohd Hazani, Shafie and Sivakumar, Dhar Malingam and Juhari, Ab. Razak and Mohd. Zulkifli, Selamat (2005) An Expert Fault Diagnosis System For Vehicle Air Conditioning Production And Maintenance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, CheeFai (2013) Total Design of Active Neck Support System for Economy Class Aircraft Seat. Applied Mechanics and Materials. pp. 657-660. ISSN 1660-9336

Tan, CheeFai and Radzai, Said and Shamsul Anuar, Shamsudin and Mohd. Rizal, Alkahari (2006) Analysis And Optimisation Of Unmanned All-Terrain Vehicle : Mechanical Structure Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, CheeFai (2010) Smart system for aircraft passenger neck support. PhD thesis, Eindhoven University of Technology.

Tan, CheeFai and Chen, Wei and Rauterberg, G.W.M. (2010) An Approach to Study the Body Back Discomfort of Economy Class Aircraft Passenger. In: International Conference on Applied Human Factors and Ergonomics (AHFE2010), Miami, Florida, US.

Tan, CheeFai and Chen, Wei and Rauterberg, G.W.M. (2010) Seat Discomfort of Dutch Truck Driver Seat: A Survey Study and Analysis. In: SAE 2010 World Congress & Exhibition, 13 April 2010, Detroit, Michigan, United States .

Tan, CheeFai and Chen , Wei and Rauterberg , G.W.M. (2010) SELF-REPORTED SEAT DISCOMFORT AMONG DUTCH COMMERCIAL TRUCK DRIVERS. In: FISITA2012, 30 May - 4 June, Budapest, Hungary.

Tan, CheeFai and Khalil , Siti Nurhaida and Said, Md Radzai (2014) Numerical Modeling of Air-Based Bus Seat. Applied Mechanics and Materials, 663. pp. 610-613. ISSN 1660-9336

Tan, CheeFai and Sarban Singh, Ranjit Singh and Siti Aisyah, Anas (2011) Truck seating comfort: objectify and subjectify measurement approach. International Journal of Soft Computing and Engineering (IJSCE), 1 (5). pp. 1-6. ISSN 2231-2307

Tan, Ser Chow (2015) Improvement Of Front Wheel Steering System Due To Side Wind. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Wen Hong (2016) The Study Of Seating Pressure On National Car (Proton And Perodua). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan , CheeFai and Chen, Wei and Rauterberg, G.W.M. (2012) Adaptive Neck Support for Wellbeing During Air Travel. In: Handbook of Ambient Assisted Living - Technology for Healthcare, Rehabilitation and Well-being. Ambient Intelligence and Smart Environments, 11 . IOS Press, Netherlands, pp. 1-18. ISBN 978-1-60750-836-6

Tan , Soon Lam (2008) Design Improvement Of Wheel Spacer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan , Chee Fai and Chen , W. and Kimman, F. and Rauterberg, G.W.M. (2010) Sleeping in Sitting Posture Analysis of Economy Class Aircraft Passenger. In: Electronic Engineering and Computing Technology, Series: Lecture Notes in Electrical Engineering. Lecture Notes in Electrical Engineering, 60 . Springer Netherlands, pp. 703-713. ISBN 978-90-481-8776-8

Tee, Chai Yong (2014) Smart Parking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Jia Wei (2015) Effect Of Yaw Angle On The Aerodynamics Performance Of Rear Spoiler-By CFD Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Yian Phing (2005) Smart Parking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teo, Chee Huat (2013) Pedestrians Emerging And Safety Alert System In Public Buses For Road Users. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Terrence, Mark Adrain (2015) A Study Of Harvesting Potential Wind Energy Based On Turbulence Effect On The Side Of The MPV (MULTI-PURPOSE VEHICLE) Using CFD Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Too , Phooi Wah (2010) Development Of Concept Design For An Ideal Intercity Bus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Toong, Chui Eng (2009) Study Of Heat Exchanger Effect In A Car Air Conditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

U

Ubaidillah, . (2010) Sixth Order Polynomial Model And Skyhook Algorithm Based Fuzzy Logic Control Of Magnetorheological Damper For Automotive Suspension System. Masters thesis, UTeM.

V

Vignesh Kumar, Subramaniam (2006) Design The Car Park Control Using Grafcet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Vimal Rau, Aparow (2011) Pc Based Data Acquisition System For Scaled Vehicle Navigation System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

W. Mohd Zailimi, W. Abdullah (2004) Motorcar Powered by Fuel Cell. Masters thesis, Coventry University.

Wan Ellena Nadia, Wan Kamal (2012) Modeling, Simulation And Control Of Antilock Braking System Using Multibody Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Fairuz, Wan Yusof (2005) Propeller Powered Solar Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mohamad Nohsa , Wan Yaacob (2009) Kesan Penggunaan Alat Penjimat Bahanapi Ke Atas Prestasi Enjin. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Wan Mohd Khidhir, Abdul Aziz (2006) Merekabentuk Prototaip Unit Kawalan Elektronik Bagi Sistem Beg Udara. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mokhtar, Wan Abdullah (2006) Ramalan Aliran Haba Dan Jisim Melalui Satu Kipas Penukar Haba Menggunakan Pemodelan CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nor Izham , Wan Nashar (2008) Fabrication Of Dry Painting Booth For Makmal Prototaip Dan Inovasi, Jabatan Reka Bentuk Dan Inovasi, Fakulti Kejuruteraan Mekanikal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Norazrini , Idris (2013) Model Matematik "Hibrid-Mekanikal Berasaskan Rim" Menggunakan Roda Tenaga Dwi-Jisim Untuk Mengoptimumkan Penggunaan Tenaga Dalam Motosikal Hibrid-Mekanikal. Project Report. UTeM, Melaka. (Submitted)

Wan Norhafizan , Wan Rohizan (2008) Rotorblade Aerodynamic Performance Evaluation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wazirtani, Othman (2011) Experimental Study Of Steering Wheel Vibration In Dynamic Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Jiar Mean (2010) Development Of Concept Design For An Ideal City Bus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Daphne Jie Yin (2015) Validation Of Pressure Distribution On Generic Side View Mirror By Experimental And Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, , Hee Kiong (2013) Measurement of structure-borne noise from road input in a motor vehicle cabin. Project Report. UTeM, Melaka. (Submitted)

Y

Yap, Choon Yuen (2009) Material Selection And Optimization Design For Car Side Door Impact Beam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yap, Kent Peng (2009) Computational Fluid Dynamics (CFD) Prediction Of Flow And Temperature Distribution In Drying Compartment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yew, Kheng Loon (2009) Vehicle Handling Improvement Using Steer By Wire Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong, Sze Yeau (2013) Design Analysis Of High Performance Motorcycle Disc Brake. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusmalina, Yusoff (2008) Kecekapan Dan Kehilangan Haba Ekzos Enjin Diesel 2 Liter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Z

Zaidy, Zainudin (2009) Analisis Keboleharapan Dan Jangka Hayat Komponen Automotif Steering Knuckle Menggunakan CAE. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal Ariffin, Ahmad Zainal Taufik and Mat Nuri @ Md Din, Nur Rashid and Ahmad Mansor, Mazlan and Hassan, Muhammad Zahir and Abdul Latif, Mohd Faruq (2014) Electric Car Chassis Design and Analysis by Using CATIA V5 R19. Electric car chassis design and analysis by using CATIA V5 R19. pp. 1-4. ISSN 2278-1684

Zainordin, Ahmad Zaifazlin and ABDULLAH, Mohd Azman and Hudha, Khisbullah (2013) Modelling and validation of magnetorheological brake responses using parametric approach. IOP Conf. Series: Materials Science and Engineering. pp. 1-8. ISSN 1757-899X

Zainuddin, Intan Shafinaz (2008) Rekabentuk Tali Pinggang Kereta Untuk Ibu Mengandung. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria , Hamzah (2007) The Study Of Aerodynamic Effect On Spoiler. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Zaweer Akram, Zainal Abiden (2012) Dynamic Analysis Of A Lightweight Clutch Disc. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulazrin, Ismail (2009) Simulation And Experimental Investigation On Magnetorheological Damper Characterization Using Sixth Order Polynomial Approached. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulazrin, Ismail (2009) Simulation and Experimental Investigation On Magnetorheological Damper Characterization Using Sixth Order Polynomial Approached. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulfadli, Kasmani (2010) Simulation Of Automatic Steering System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulizwan , Sutaji (2011) Design Of Ergonomics Car Instrument Panel And Dashboard. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkifli, Ibrahim and Muhammad Sharil, Yahaya and Mohd Razali, Mohamad Sapiee (2012) Develop A Direct Drive System For Electric Motorcycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zuriadi, Ahmad Hafizi (2012) Quadcopter Rembedded Controller For Altitude Hold And Surveillance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zuwairi Amin , Md Hata (2008) Steering System Design And Analysis Of Formula Varsity Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

This list was generated on Fri Oct 20 01:39:43 2017 MYT.