Development Of Numerical Model For Simulation Intake Flow In Combustion Chamber Of L-Head Engine Type

Abdul Munir, Fudhail and Mohd Tahir, Musthafah and Mohd Shafie, Abdul Muhaimin and Hassan, Muhammad Zahir (2017) Development Of Numerical Model For Simulation Intake Flow In Combustion Chamber Of L-Head Engine Type. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 17 (2). pp. 134-142. ISSN 2227-2771

Text 175301-4848-IJMME-IJENS_Musthafah et al.pdf - Published Version Download (1MB)

Abstract

Flow inside the combustion chamber plays the main role in the combustion process. This paper analyzed the behavior of the flow inside the L-type combustion chamber for in-cylinder engine with three different simulations. The first simulation is dealing with the static geometry of the domain. There are only combustion chambers and piston volume involved in the static simulation. The air inlet velocity is calculated using the standard engine formula for the piston at position of 9°, 18°, 27°, 36°, and 45° degrees after the top dead center. Engine speed ranges from 1500 rpm to 4500 rpm with increment of 500 rpm. The second simulation called port-flow simulation also deals with the static geometry domain but there is an addition at the intake port and intake valve. The piston volume is set to be at highest volume. There are three different valve lift used. The inplanum pressure is set to the environment pressure and the outplanum pressure is set according to the chosen values.

Item Type:	Article
Uncontrolled Keywords:	Micro power generation, micro-scale combustors, heat recirculation
Subjects:	T Technology > T Technology (General) T Technology > TK Electrical engineering. Electronics Nuclear engineering
Divisions:	Faculty of Mechanical Engineering
Depositing User:	Nor Aini Md. Jali
Date Deposited:	15 May 2018 09:18
Last Modified:	08 Jul 2021 23:14
URI:	http://eprints.utem.edu.my/id/eprint/20848
Statistic Details:	View Download Statistic

Actions (login required)

View Item