Che Aziz, Siti Asma and Mohd Chachuli, Siti Amaniah and Shamsudin, Nur Hazahsha and Hamid, Rosyati (2025) ZnO thick film gas sensor for methane sensing at room operating temperature. Kufa Journal of Engineering, 17 (2). pp. 464-475. ISSN 2523-0018
|
Text
0236404052026142673167.pdf Available under License Creative Commons Attribution. Download (740kB) |
Abstract
Methane (CH₄) is a strong greenhouse gas and dangerous in industrial settings, so highly sensitive and reliable sensors are needed to detect it at low concentrations. In this study, ZnO-based thick-film gas sensors were fabricated using a screen-printing technique on Kapton substrates and evaluated for methane sensing at room temperature. The device consists of an interdigitated electrode (IDE) and a ZnO sensing layer, both deposited onto the Kapton substrate via screen printing. The prepared sensors were then tested with methane at 6700 ppm and 7500 ppm concentrations. Results show that both ZnO sensors have good linearity in I-V measurements meaning that they exhibit ohmic behavior. ZnO2 sensitivity was higher than ZnO1 probably due to some microstructural differences. Resistance changes during gas exposure were used as the sensor response.
| Item Type: | Article |
|---|---|
| Uncontrolled Keywords: | Binder, I-V characteristics, Methane, Screen-printing, ZnO gas sensor |
| Divisions: | Faculty Of Electronics And Computer Technology And Engineering |
| Depositing User: | Sabariah Ismail |
| Date Deposited: | 21 Jul 2026 04:09 |
| Last Modified: | 21 Jul 2026 04:09 |
| URI: | http://eprints.utem.edu.my/id/eprint/30186 |
| Statistic Details: | View Download Statistic |
Actions (login required)
![]() |
View Item |
