Items where Author is "A Ghani, Jaharah"

Kasim, Mohd Shahir and Mohd Nasir, Faarih Farhan and A Ghani, Jaharah and Raja Abdullah, Raja Izamshah and Mohd Shahrim, Mohammad Shah All Hafiz and Wong, Pui Kei and Yusof, Ahmad Anas and Mohamad, W Noor Fatihah (2019) Analysis On Effect Of Ball Bladder Size During Water Hammer In Domestic Water System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (1). pp. 33-43. ISSN 2289-7879

Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Raja Abdullah, Raja Izamshah and Akmal, Suriati and Md Ali, Mohd Amran and Abu Bakar, Mohd Hadzley and Salleh, Mohd Shukor (2018) Investigation Of Tangential Force On Ball Nose Rake Face During High-Speed Milling Of Inconel 718. Advances In Materials And Processing Technologies, 4 (3). pp. 1-7. ISSN 2374-0698

Sulaiman, Mohd Amri and Mat, Siti Asiyah and Razak, Muhammad Shahmi and Ramle, Zuraimi and Mohamad, Effendi and Che Haron, Che Hassan and A Ghani, Jaharah (2018) Performance Of CVD Coated Carbide Tool By Optimizing Machining Parameters During Turning Titanium Alloy Ti-6AL-4V ELI In Flooded Condition. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 401-412. ISSN 1985-3157

Abdul Hadi, Musfirah and A Ghani, Jaharah and Che Haron, Che Hassan and Kasim, Mohd Shahir (2016) Effect Of Cutting Speed On The Carbide Cutting Tool In Milling Inconel 718 Alloy. Journal Of Materials Research, 31 (13). pp. 1885-1892. ISSN 0884-2914

Che Haron, Che Hassan and Sulaiman, Mohd Amri and A Ghani, Jaharah and Kasim, Mohd Shahir and Mohamad, Effendi (2016) Performance Of Carbide Tool In High Speed Turning Of TI-6AL-4V ELI Under Conventional Coolant And Minimal Quantity Lubrication. ARPN Journal Of Engineering And Applied Sciences, 11 (7). pp. 4817-4821. ISSN 1819-6608

Ruslan, Mohd Shahfizal and Othman, Kamal and A Ghani, Jaharah and Kasim, Mohd Shahir and Che Haron, Che Hassan (2016) Surface Roughness Of Magnesium Alloy AZ91D In High Speed Milling. Jurnal Teknologi, 78 (6-9). pp. 115-119. ISSN 0127-9696

A Ghani, Jaharah and Che Haron, Che Hassan and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Tomadi, Siti Haryani (2016) Wear Mechanism Of Coated And Uncoated Carbide Cutting Tool In Machining Process. Journal Of Materials Research, 31 (13). pp. 1873-1879. ISSN 0884-2914

Kasim, Mohd Shahir and Atan, Mohamad Hazizan and Che Haron, Che Hassan and A Ghani, Jaharah and Sulaiman, Mohd Amri and Mohamad, Effendi and Mohamad, Minhat and Abu Bakar, Mohd Hadzley and Saedon, Juri (2015) Analysis Of Tool Performance During Ball-End Milling Of Aluminium Alloy 6061-T6. Applied Mechanics and Materials, 761. pp. 318-323. ISSN 1662-7482

Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Abdul Aziz, Mohd Sanusi and Mohd Abid, Mohd Asyadi 'Azam and Che Haron, Che Hassan and A Ghani, Jaharah (2014) The Influence Of Cutting Parameter On Heat Generation In High-Speed Milling Inconel 718 Under MQL Condition. Journal of Scientific & Industrial Research (JSIR), 73 (1). pp. 62-65. ISSN 0975-1084 (Online); 0022-4456 (Print)

Kasim, Mohd Shahir and Mohd Zahudi, Mohd Sufri and Che Haron, Che Hassan and A Ghani, Jaharah and Raja Abdullah, Raja Izamshah and Mohd Isa, Mohd Hanafiah and Saedon, Juri and Roni Sahroni, Taufik and Ito, Teruaki (2014) The Effect Of WEDM Cutting Parameter On Inconel 718 Subsurface Microhardness. Journal of Advanced Manufacturing Technology, 8 (2). pp. 51-59. ISSN 1985-3157

Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Mohamad, Effendi and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Saedon, Juri (2014) Multi-Objective Optimization Using Box-Behken Of Response Surface Methodology For High-Speed Machining Of Inconel 718. Applied Mechanics and Materials, 629 (-). pp. 487-492. ISSN 1660-9336

Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Mohamad, Effendi and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Saedon, Juri (2014) Multi-Objective Optimization Using Box-Behnken Of Response Surface Methodology For High-Speed Machining Of Inconel 718. Applied Mechanics and Materials, 629. pp. 487-492. ISSN 1662-7482

Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Minhat, Mohamad and Mohamad, Noraiham and Che Haron, Che Hassan and A Ghani, Jaharah and Saedon, Juri and Saad, Nor Hayati and Mohamed, Saiful Bahri (2014) Prediction Of Cutting Force In End Milling Of Inconel 718. Journal of Engineering and Technology (JET), 5 (2). pp. 63-70. ISSN 2180-3811

Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Gusri, Akhyar Ibrahim and Mohd Zaid, Abdul Yazid and Sulaiman, Mohd Amri (2013) Tool Life Of TiAlN PVD Coated Carbide Tool In High-Speed End Milling Of Untreated Inconel 718 Under Minimum Quantity Lubrication Condition. Sains Malaysiana, 42 (12). pp. 1721-1726. ISSN 0126-6039

Che Haron, Che Hassan and A Ghani, Jaharah and Sulaiman, Mohd Amri and Lutfiah Intan and Kasim, Mohd Shahir (2011) The Effect Of Minimal Quantity Lubrication (MQL) On The Surface Roughness Of Titanium Alloy Ti-6Al-4V ELI In Turning Process. Advanced Materials Research Journal, 146-14 (1750). pp. 1750-1753. ISSN 10.4028