Items where Author is "Ahmad, Mohd Nazri"

Article

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Mohammad Taha, Mastura and Mustapha, Faizal and Leman, Zulkiflle (2022) Investigation of ABS-Oil Palm Fiber (Elaeis guineensis) composites filament as feedstock for fused deposition modeling. Rapid Prototyping Journal, -. 01-13. ISSN 1355-2546

Ishak, Mohamad Ridzwan and Ahmad, Mohd Nazri and Mustapha, Faizal and Mohammad Taha, Mastura and Leman, Zulkiflle (2022) Rheological properties of natural fiber reinforced thermoplastic composite for fused deposition modeling (FDM): a short review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 98 (2). pp. 157-164. ISSN 2289-7879

Lau, Kok Tee and Mohammad Taha, Mastura and Abd Rashid, Norhanani Hidayati and Manogaran, Devaki and Ahmad, Mohd Nazri (2022) EFFECT of hBn fillers on rheology property and surface microstructure of ABS extrudate. Jurnal Teknologi, 84 (4). pp. 175-182. ISSN 2180–3722

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Mustapha, Faizal and Mohammad Taha, Mastura and Lukista, Debby Dyne and Ghazali, Ihwan and Leman, Zulkiflle and Irianto (2022) Application of Taguchi method to optimize the parameter of Fused Deposition Modeling (FDM) using oil palm fiber reinforced thermoplastic composites. Polymers, 14 (11). 01-15. ISSN 2073-4360

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Mohammad Taha, Mastura and Mustapha, Faizal and Leman, Zulkiflle (2021) Rheological and morphological properties of oil palm fiber-reinforced thermoplastic composites for fused deposition modeling (FDM). POLYMERS, 13 (21). 01-14. ISSN 2073-4360

Hussin, Mohamed Saiful Firdaus and Ahmad, Mohd Nazri and Jumaidin, Ridhwan and Mohammad Taha, Mastura and Mansor, Muhd Ridzuan and Muhamad Damanhuri, Amir Abdullah and Mukhtar, Mohd Fariduddin and Wahid, Mohammad Khalid and Zakaria, Azrul Abidin (2021) Effect Of Surface Roughness On Oil-Water Separation For Oil Skimmer. ARPN Journal Of Engineering And Applied Sciences, 16 (17). pp. 1742-1750. ISSN 1819-6608

Jumaidin, Ridhwan and Mohd Zainel, Siti Nuraisyah and Adam, Nur Wardah and Hussin, Mohamed Saiful Firdaus and Ab Ghani, Ahmad Fuad and Mohammad Taha, Mastura and Yaakob, Mohd Yuhazri and Ahmad, Mohd Nazri and Maidin, Nurul Ain and Wahid, Mohammad Khalid and Ab Rahman, Mohd Hidayat and Osman, Mohd Hairizal and Mansor, Muhd Ridzuan and Mohamad Yatim, Nor Azlina (2021) Thermal Degradation And Mechanical Characteristics Of Sugarcane Bagasse Reinforced Biodegradable Potato Starch Composites. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 78 (1). pp. 157-166. ISSN 2289-7879

Ahmad, Mohd Nazri and Abdul Rasib, Amir Hamzah and Tarmeze, A. A. (2020) Capability Of 3D Printing Technology In Producing Molar Teeth Prototype. International Journal On Engineering Applications, 8 (2). pp. 64-70. ISSN 2281-2881

Ahmad, Mohd Nazri and Wahid, Mohammad Khalid and Maidin, Nurul Ain and Ab Rahman, Mohd Hidayat and Osman, Mohd Hairizal and Alis@Elias, Izzati Fatin (2020) Mechanical Characteristics Of Oil Palm Fiber Reinforced Thermoplastics As Filament For Fused Deposition Modeling (FDM). Advances in Manufacturing, 8 (1). pp. 72-81. ISSN 2095-3127

Ab Rahman, Mohd Hidayat and Ahmad, Umi Hayati and Jumaidin, Ridhwan and Osman, Mohd Hairizal and Wahid, Mohammad Khalid and Maidin, Nurul Ain and Ahmad, Mohd Nazri and Mohd Basri, Mohd Salahuddin (2020) Design And Development Of Ergonomic Table And Analyze Using Rula Analysis. Malaysian Journal of Public Health Medicine, 20 (SI 1). pp. 138-144. ISSN 1675-0306

Maidin, Nurul Ain and Ab Rahman, Mohd Hidayat and Ahmad, Mohd Nazri and Wahid, Mohammad Khalid and Osman, Mohd Hairizal and Jumaidin, Ridhwan and Mazlan, Siti Nur Humaira and Mohd Basri, Mohd Salahuddin (2020) Design For Manufacturability (DFM) Of 3D Printed Parts Fabricated Using Open Source 3D Printer. International Journal Of Integrated Engineering, 12 (5). pp. 203-209. ISSN 2229-838X

Maidin, Nurul Ain and Ab Rahman, Mohd Hidayat and Ahmad, Mohd Nazri and Osman, Mohd Hairizal and Wahid, Mohammad Khalid and Mazlan, Siti Nur Humaira and Abdul Latiff, Muhammad (2019) Airco Wind Turbine Prototype Design And Development. International Journal of Recent Technology and Engineering, 8 (1S5). pp. 79-85. ISSN 2277-3878

Wahid, Mohammad Khalid and Ahmad, Mohd Nazri and Osman, Mohd Hairizal and Maidin, Nurul Ain and Ab Rahman, Mohd Hidayat and Hussin, Mohamed Saiful Firdaus and Kasno, Mohammad `Afif (2019) Development Of Biodegradable Plastics For Packaging Using Wastes From Oil Palm And Sugar Cane. International Journal Of Recent Technology And Engineering (IJRTE), 8 (1S5). pp. 75-78. ISSN 2277-3878

Jumaidin, Ridhwan and Ab Rahman, Mohd Hidayat and Ahmad, Mohd Nazri and Wahi, Mohammad Khalid and Yaakob, Mohd Yuhazri and Maidin, Nurul Ain and Osman, Mohd Hairizal and Sutan Saidi, Zulhelmi Asyul and Ahmad Ilyas, Rushdan (2019) Characteristics Of Cogon Grass Fibre Reinforced Thermoplastic Cassava Starch Biocomposite: Water Absorption And Physical Properties. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (1). pp. 43-52. ISSN 2289-7879

Ahmad, Mohd Nazri and Wahid, Mohammad Khalid and Maidin, Nurul Ain and Ab Rahman, Mohd Hidayat and Osman, Mohd Hairizal and Alis@Elias, Izzati Fatin (2019) A Complete Denture By Rapid Prototyping With Reverse Engineering Approach. International Journal of Mechanical and Mechatronics Engineering, 19 (3). pp. 50-57. ISSN 2227-2771

Ahmad, Mohd Nazri and Osman, Mohd Hairizal and Jumaidin, Ridhwan and Abu Hassan, Muhammad Afiq and Wahid, Mohammad Khalid and Maidin, Nurul Ain and Ab Rahman, Mohd Hidayat (2019) Flow Analysis Of Five-Axis Impeller In Vacuum Casting By Computer Simulation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (2). pp. 181-189. ISSN 2289-7879

Ahmad, Mohd Nazri and Ab Rahman, Mohd Hidayat and Osman, Mohd Hairizal and Wahid, Mohammad Khalid and Maidin, Nurul Ain and Mohd Basir, Mohamad Faris (2019) Shrinkage Effect Of Vacuum Casting Process Parameters Using Taguchi Method. International Journal of Integrated Engineering, 11 (3). pp. 248-254. ISSN 2229-838X

Ab Rahman, Mohd Hidayat and Maidin, Nurul Ain and Ahmad, Mohd Nazri and Osman, Mohd Hairizal and Wahid, Mohammad Khalid and Hussin, Mohamed Saiful Firdaus and Mohd Yassim, Halyani and Razali, Muhammad Zayani Afiq (2018) A Prototype Development Of Anti-Hunchback Device. Journal of Mechanical Engineering, SI5(1). pp. 192-209. ISSN 1823-5514

Osman, Mohd Hairizal and Ab Rahman, Mohd Hidayat and Ahmad, Mohd Nazri and Wahid, Mohammad Khalid and Maidin, Nurul Ain (2017) A Study Of Optimization For Surface Finish On Drilling Process Of AISI D2 Tool Steel. International Journal Of Applied Engineering Research, 12. 9644-9652 . ISSN 0973-4562

Osman, Mohd Hairizal and Ab Rahman, Mohd Hidayat and Ahmad, Mohd Nazri and Wahid, Mohammad Khalid and Maidin, Nurul Ain (2017) Optimization Of Drilling Parameters On Diameter Accuracy In Dry Drilling Process Of AISI D2 Tool Steel. International Journal Of Applied Engineering Research, 12 (20). pp. 9644-9652. ISSN 0973-4562

Su, Muhammad Nasiruddin and Arep @ Ariff, Hambali and Jaafar, Roshidah and Widodo, Wahyono Sapto and Ahmad, Mohd Nazri (2017) A Review Of Energy Absorption Of Automotive Bumper Beam. International Journal of Applied Engineering Research, 12 (2). pp. 238-245. ISSN 0973-4562