Items where Author is "Alkahari , Mohd Rizal "

Alkahari, Mohd Rizal and Azizul Izham, Emalyn Damyra Idza and Hussein, Nur Izan Syahriah and Maidin, Shajahan and Ramli, Faiz Redza (2023) Online monitoring of wire arc additive manufacturing process: A review. Advances In Materials And Processing Technologies. pp. 1-16. ISSN 2374-0698

Rosli, Nor Ana and Alkahari, Mohd Rizal and Mohamad Norani, Mohamad Nordin and Abdollah, Mohd Fadzli bin and Paijan, Lailatul Harina and Furumoto, T (2023) Evaluation on the performance of sustainable wire arc additive manufacturing using micro plasma arc welding. In: 5th International Conference on Green Energy and Environment 2023 , ICoGEE 2023, 26 September 2023 through 27 September 2023, Pangkalpinang.

Ramli, Faiz Redza and Sudin, Mohd Nizam and Alkahari, Mohd Rizal and Che Mat, Muhammad Arifuddin and Herawan, Safarudin Ghazali (2022) The effect of tensile strength and surface roughness by varying oxygen level in 3D printer chamber. Jurnal Tribologi, 33. pp. 80-96. ISSN 2289-7232

Abd. Latif, Mohd Juzaila and Alkahari, Mohd Rizal and Yob, Mohd Shukri and Lim, Gordon Tze Yih and Musa @ Othman, Masjuri and Abdul Rahman, Mohd Nazim and P. Rajaandra and Nguyen, H. Q. (2022) Parameter optimization of fused deposition modeling process for 3D printed prosthetic socket using PCR-TOPSIS method. International Journal of Nanoelectronics and Materials, 15 (SI). pp. 247-258. ISSN 1985-5761

Abdullah, Muhammad Ilman Hakimi Chua and Omar, Mohammad Rafi and Alkahari, Mohd Rizal and Abdullah, Rohana and Abdollah, Mohd Fadzli bin and Subramaniam, Mahananthan and Ibramsa, Rizwana Seeni (2022) Effect of polyamide-12 material compositions on mechanical properties and surface morphology of SLS 3D printed part. Journal of Mechanical Engineering, 19 (1). pp. 57-70. ISSN 1823-5514

Alkahari, Mohd Rizal and Abdollah, Mohd Fadzli and Ramli, Faiz Redza and Rosli, Nor Ana and Maidin, Shajahan and Herawan, Safarudin Gazali (2021) Review On Effect Of Heat Input For Wire Arc Additive Manufacturing Process. Journal of Materials Research and Technology, 11. pp. 2127-2145. ISSN 2238-7854

Mat, Shafizal and Ramli, Faiz Redza and Alkahari, Mohd Rizal and Mustafar, Ahmad Al Idrisi and Zainal Aris, Muhamad Aminur 'Ilman and Jamli, Mohamad Ridzuan and Case, Keith (2020) Parameter Optimization In 3D Printer Recycle Machine. ARPN Journal of Engineering and Applied Sciences, 15 (21). pp. 2385-2392. ISSN 1819-6608

Rosli, Nor Ana and Abdollah, Mohd Fadzli and Alkahari, Mohd Rizal and Ramli, Faiz Redza (2020) Influence Of Process Parameter On The Height Deviation Of Weld Bead In Wire Arc Additive Manufacturing. International Journal of Mechanical and Production Engineering Research and Development, 10 (3). pp. 1165-1176. ISSN 2249–6890

Hasan, Rafidah and Rosli, Nur Ameelia and Mat, Shafizal and Alkahari, Mohd Rizal (2020) Failure Behaviour Of 3D-Printed ABS Lattice Structure Under Compression. International Journal of Engineering and Advanced Technology (IJEAT), 9 (3). pp. 3908-3912. ISSN 2249–8958

Muhamad Damanhuri, Amir Abdullah and Omar, Mohammad Rafi and Hariri, Azian and Md Fauadi, Muhammad Hafidz Fazli and Alkahari, Mohd Rizal (2019) Emission Of Selected Environmental Exposure From Selective Laser Sintering (SLS) Polyamide Nylon (PA12) 3D Printing Process. Journal of Safety, Health and Ergonomics, 1 (1). pp. 1-6. ISSN 2682-745X

Muhamad Damanhuri, Amir Abdullah and Hariri, Azian and Alkahari, Mohd Rizal and Md Fauadi, Muhammad Hafidz Fazli and Zainal Bakri, Siti Farhana (2019) Indoor Air Concentration From Selective Laser Sintering 3D Printer Using Virgin Polyamide Nylon (PA12) Powder: A Pilot Study. International Journal of Integrated Engineering, 11 (5). pp. 140-149. ISSN 2229-838X

Hasan, Rafidah and Alkahari, Mohd Rizal and Ismail, Rainah and Said, Radzai and Md Ali, Syaril Azrad and Azmi, Muhamad Syafwan and Rosli, Nur Ameelia (2019) Investigation On Process-Properties Relationship With Load-Bearing Performance Of Lattice-Structured Cellular Material For Lightweight Applications. [Technical Report] (Submitted)

Hasan, Rafidah and Azmi, Muhamad Syafwan and Rosli , Nur Ameelia and Alkahari , Mohd Rizal and Ismail , Rainah (2018) Static And Dynamic Analysis Of FDM Printed Lattice Structures For Sustainable Lightweight Material Application. Progress In Industrial Ecology, 12. pp. 247-259. ISSN 1476-8917

Alkahari, Mohd Rizal and Mazlan, Siti Nur Humaira and Ramli, Faiz Redza and Maidin, Nurul Ain and Sudin, Mohd Nizam and Zolkaply, Ardzatul Ruziah (2018) Surface Finish And Mechanical Properties Of Fdm Part After Blow Cold Vapor Treatment. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 48. pp. 148-155. ISSN 2289-7879

Alkahari, Mohd Rizal and Ramli, Faiz Redza and Faudzie, M. S. M and Nazan, Muhammad Afdhal and Sudin, Mohd Nizam and Mat, Shafizal and Khalil, Siti Nurhaida (2018) Dimensional Accuracy And Surface Roughness Of Part Features Manufactured By Open Source 3D Printer. ARPN Journal Of Engineering And Applied Sciences, 13. p. 1139. ISSN 1819-6608

Rosli, Nor Azwar Syahila and Hasan, Rafidah and Ng, Wai Hoe and Baharudin, Muhammad Khairi and Alkahari, Mohd Rizal (2018) Investigation on process-properties relationship with mechanical properties of lattice-structured cellular material for lightweight application. International Journal Of Engineering And Technology (UAE), 7 (3.17). pp. 1-4. ISSN 2227-524X

Nazan, Muhammad Afdhal and Ramli, Faiz Redza and Alkahari, Mohd Rizal and Sudin, Mohd Nizam and Abdullah, M. A. (2017) Process Parameter Optimization Of 3D Printer Using Response Surface Method. ARPN Journal Of Engineering And Applied Sciences, 12 (7). pp. 2291-2296. ISSN 1819-6608

Maidin, Shajahan and Loo, Heoy Shin and Alkahari, Mohd Rizal and Samat, Khairul Fadzli and Yahaya, Saifudin Hafiz (2015) Bone Scaffold Geometrical Design And Material Selection By Using Analytical Hierarchy Process For Additive Manufacturing Process. Jurnal Teknologi, 77 (32). pp. 141-149. ISSN 0127-9696

Alkahari, Mohd Rizal and Furumoto, Tatsuaki and Ueda, Takashi and Hosokawa, Akira (2014) Consolidation Characteristics Of Ferrous-Based Metal Powder In Additive Manufacturing. Journal Of Advanced Mechanical Design, Systems, And Manufacturing, 8 (1). pp. 1-16. ISSN 1881-3054

Alkahari, Mohd Rizal and Furumoto, Tatsuaki and Ueda, Takashi and Hosokawa, Akira (2014) Melt Pool And Single Track Formation In Selective Laser Sintering Selective Laser Melting. Advanced Materials Research, 933 (-). pp. 196-201. ISSN 1662-8985

Tan, Chee Fai and Alkahari, Mohd Rizal and Said, Md Radzai and Dhar Malingam, Sivakumar and Liew, S. M. and Chen, Wei and Rauterberg, G. W. Matthias and Sarban Singh, Ranjit Singh and Subramonian, Sivarao (2013) Fire fighting mobile robot: state of the art and recent development. Australian Journal of Basic and Applied Sciences, 7 (10). pp. 220-230. ISSN 1991-8178