Items where Author is "Bani Hashim, Ahmad Yusairi"

Bani Hashim, Ahmad Yusairi (2023) Contemporary robotics with classical kinematic modeling. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792734

Fu, Zinvi and Jamaludin, Zamberi and Bani Hashim, Ahmad Yusairi and Mohamad, Imran Syakir (2021) Review on EMG acquisition and classification techniques: Towards zero retraining in the influence of user and arm position independence. International Journal of Integrated Engineering, 13 (4). pp. 1-15. ISSN 2229-838X

Fu, Zinvi and Bani Hashim, Ahmad Yusairi and Jamaludin, Zamberi and Mohamad, Imran Syakir (2021) The classification of EMG signals with zero retraining in the influence of user and rotation independence. International Journal Of Integrated Engineering, 13 (1). pp. 120-129. ISSN 2229-838X

Bani Hashim, Ahmad Yusairi and Afandi, Azri Nazran and Mohamad, Imran Syakir and Zainal Abidin, Syazwani and Abdullah, Amira Lateef (2020) The behaviour of nanofluids flooded in printed mini channels when excited by a small electrical potential. International Journal of Nanomanufacturing, 16 (1). pp. 76-88. ISSN 1746-9392

Bani Hashim, Ahmad Yusairi and Shukor, Ahmad Zaki and Shamsuddin, Syamimi and Kamsani, Silah Hayati and Mat Ali, Mahasan (2019) Simulation and reproduction of a manipulator according to classical arm representation and trajectory planning. Advances in Science, Technology and Engineering Systems, 4 (6). pp. 158-162. ISSN 2415-6698

Tan, Ming Hui and Bani Hashim, Ahmad Yusairi and Salleh, Mohd Rizal (2019) Radio frequency connector insertion loss measured from 300 KHz Until 8.5 GHz by using network analyzer and mechanical calibration kits. Journal Of Engineering Science And Technology, 14 (3). pp. 1587-1600. ISSN 1823-4690

Bani Hashim, Ahmad Yusairi (2019) Using worn out insole to express human foot. International Journal Of Biomedical Engineering And Technology, 29 (1). pp. 84-99. ISSN 1752-6418

Jamaludin, Zamberi and Chiew, Tsung Heng and Bani Hashim, Ahmad Yusairi and Rafan, Nur Aidawaty and Abdullah, Lokman (2018) Optimization of super twisting sliding mode control gains using Taguchi method. Industrial Engineering & Management Systems, 17. pp. 62-71. ISSN 2234-6473

Chiew, Tsung Heng and Jamaludin, Zamberi and Bani Hashim, Ahmad Yusairi and Abdullah, Lokman and Rafan, Nur Aidawaty and Maharof, M (2017) Second order sliding mode control for direct drive positioning system. Journal of Mechanical Engineering and Sciences (JMES), 11 (4). pp. 3206-3216. ISSN 2289-4659

Chiew, Tsung Heng and Jamaludin, Zamberi and Bani Hashim, Ahmad Yusairi and Abdullah, Lokman and Rafan, Nur Aidawaty (2017) Design of super twisting algorithm for chattering suppression in machine tools. International Journal Of Control, Automation And Systems, 15 (3). pp. 1259-1266. ISSN 1598-6446

Zainal Abidin, Syazwani and Mohamad, Imran Syakir and Bani Hashim, Ahmad Yusairi and Abdullah, Norli and Md Isa, Mohamed Hafiz and Masripan, Nor Azmmi and Abdullah, Amirah (2016) Investigation of thermal characteristics of CNF-based nanofluids for electronic cooling applications. Journal of Mechanical Engineering and Sciences (JMES). 2336-2349. ISSN 2289-4659

Abdullah, Amirah and Mohamad, Imran Syakir and Bani Hashim, Ahmad Yusairi and Abdullah, Norli and Poh, Ban Wei and Md Isa, Mohamed Hafiz and Zainal Abidin, Syazwani (2016) Thermal conductivity and viscosity of deionised water and ethylene glycol-based nanofluids. Journal of Mechanical Engineering and Sciences (JMES), 10. pp. 2249-2261. ISSN 2289-4659

Chiew, Tsung Heng and Jamaludin, Zamberi and Bani Hashim, Ahmad Yusairi and Rafan, Nur Aidawaty and Abdullah, Lokman and Salleh, Mohd Rizal and Arep @ Ariff, Hambali (2016) Design and analysis of super twisting sliding mode control for machine tools. Jurnal Teknologi , 78 (10-3). pp. 25-29. ISSN 2180-3722

Jamaludin, Zamberi and Fu @ Hu-Jingwei, Zinvi and Bani Hashim, Ahmad Yusairi and Mohamad, Imran Syakir (2015) EMG recording of wrist gestures under non-ideal electrode placement for machine control in a manufacturing environment. Jurnal Teknologi , 77 (21). pp. 41-49. ISSN 2180-3722

Bani Hashim, Ahmad Yusairi and Fu, Zinvi and Jamaludin, Zamberi and Mohamad, Imran Syakir (2015) How electromyography readings from the human forearm are made cryptic, trivial, or non-trivial information for use in synthetic systems. In: 2015 5th International Conference on Biomedical Engineering and Technology (ICBET 2015), 10-11 March 2015, Seoul, South Korea.

Munawar, Rose Farahiyan and Shahril, M. Khairul and Abu, Maisarah and Bani Hashim, Ahmad Yusairi (2014) Green magnetic wave absorber, the potential of paddy straw and recycled paper. Materials Research Innovations, 18. S6-21. ISSN Print ISSN: 1432-8917 ; Online ISSN: 1433-075X

Ramdan, Nur Sufiah Akmala and Bani Hashim, Ahmad Yusairi and Kamat, Seri Rahayu and Ali Mokhtar, Mohd Najib and Asmai, Siti Azirah (2014) On lower-back pain and its consequence to productivity. Journal of Industrial and Intelligent Information, 2 (2). pp. 83-87. ISSN 2301-3745

Ahmad, NurulHuda and Kamat, Seri Rahayu and Minhat, Mohamad and Bani Hashim, Ahmad Yusairi and Isa, Halim (2014) Modeling an ergonomic driving for in-car interaction: A propose framework. In: International Conference on Industrial Engineering and Operations Management (IEOM2014), January 7 – 9, 2014, Bali, Indonesia.

Bani Hashim, Ahmad Yusairi and Maslan, Mohd Nazmin and Raja Abdullah, Raja Izamshah and Mohamad, Imran Syakir (2014) Delivering key signals to the machine: seeking the electric signal that muscles emanate. Journal of Physics Conference Series, 546 (1). pp. 1-9. ISSN 1757-8981

Ali Mokhtar, Mohd Najib and Wong, Kian Loon and Saleman, Abdul Rafeq and Bani Hashim, Ahmad Yusairi and Jafar, Fairul Azni and Zakaria, Muhammad Zulfattah (2014) Synthesis of four bar slider mechanism for finitely three separated positions. Advanced Materials Research, 903 (-). pp. 221-226. ISSN 1662-8985

Ramdan, Nur Sufiah Akmala and Bani Hashim, Ahmad Yusairi and Kamat, Seri Rahayu and Asmai, S. A. (2014) Techniques on video streaming for back pain prevention. Manufacturing Science and Technology, 2 (4). pp. 67-74. ISSN 2333-2697

Jamaludin, Zamberi and Chiew, Tsung Heng and Bani Hashim, Ahmad Yusairi and Rafan, Nur Aidawaty and Abdullah, Lokman (2013) Identification Of Friction Models For Precise Positioning System In Machine Tools. Procedia Engineering , 53. pp. 569-578. ISSN 1877-7058

Md Palil, Md Dan and Bani Hashim, Ahmad Yusairi and Adnan, R.A.B and Zamri, Ruzaidi and Abd Rahman, Khairul Anuar and Rizal, M.S. and Prabuwono, Anton Satria (2012) Computer vision based robotic polishing using artificial neural networks. Journal of Advanced Manufacturing Technology, 6 (1). pp. 61-76. ISSN 1985-3157

Bani Hashim, Ahmad Yusairi and Noor Azuan , Abu Osman and Wan Abas, Wan Abu Bakar and Abdul Latif , Lydia (2011) Approximating the relationship among the degree of the reaction forces and the nodes on footprint during a stance phase. Applied Mathematical Modelling, x (x). pp. 1-7. ISSN 0307-904X (In Press)

Bani Hashim, Ahmad Yusairi (2011) Representing system by gene encoding. International Journal of Research and Reviews in Computer Science, 2 (1). pp. 247-249. ISSN 2079-2557

Bani Hashim, Ahmad Yusairi and Noor Azuan, Abu Osman and Wan Abas, Wan Abu Bakar (2011) Determining foot-ankle mechanism design by mapping the relationships among bones, joints, and ground reaction force. Global Engineers & Technologists Review, 1 (2). pp. 39-47. ISSN 2231-9700

Bani Hashim, Ahmad Yusairi and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Abdul Latif, Lydia (2011) Evaluation of foot kinematic structure by the order of bones' and joints' edges. International Journal of Modelling and Simulation, 31 (2). pp. 101-111. ISSN 1925-7082

Bani Hashim, Ahmad Yusairi and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Abdul Latif, Lydia (2010) Analysis of shalat gait. International Journal of Open Problems in Computer Science and Mathematics, 3 (4). pp. 552-562. ISSN 1998-6262

Bani Hashim, Ahmad Yusairi and Nawawi, Badrul Hisyam and Shafii, Mohd Hanafi and Abdul Rahim, Mohd Riyadh Solihin (2009) Authentication Model Using Multiple Sensors Input. In: International Conference on Signal Acquisition and Processing, 2009. ICSAP 2009, 3-5 April 2009, Kuala Lumpur .

Bani Hashim, Ahmad Yusairi (2008) Experimenting with the problem-based learning. In: DECON 2008 - National Conference of Design and Concurrent Engineering Universiti Teknikal Malaysia Melaka , 28-29 Oktober 2008, Universiti Teknikal Malaysia Melaka. (Submitted)