Items where Author is "Mohd Tahir, Musthafah"
![]() | Up a level |
Article
Zulkafli, Nur Izyan and Sukri, Mohamad Firdaus and Mohd Tahir, Musthafah and Muhajir, Asjufri and Hanak, Dawid Piotr (2022) Optimal operation of chillers plant in academic building by using linear programming approach. Chemical Engineering Transactions, 97. pp. 91-96. ISSN 2283-9216
Sulaima, Mohamad Fani and Abdul Kadir, Aida Fazliana and Mohd Tahir, Musthafah and Sukri, Mohamad Firdaus and Yusoff, Mohd Rahimi and Abu Kasim, Ainuddin and Ali, Luqman (2022) Optimal load management strategy under off-peak tariff riders in UTeM: A case study. Bulletin of Electrical Engineering and Informatics, 11 (2). pp. 646-657. ISSN 2302-9285
Sukri, Mohamad Firdaus and Mohd Tahir, Musthafah and Ab Razak, Juhari and Ab Rahman, Azhan (2021) Achieving Energy Cost Saving Using Best Energy Tariff: A Case Study Of A Sewage Plant. International Review of Electrical Engineering (IREE), 16 (1). pp. 68-77. ISSN 1827- 6660
Abdul Munir, Fudhail and Mohd Ridzuan Tan, Nurfarah Diana and Mohd Tahir, Musthafah and Mikami, Masato (2020) Quantifying Heat Losses In Micro Combustor With Wire Mesh Using Numerical Simulation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 70 (1). pp. 37-45. ISSN 2289-7879
Ab Razak, Juhari and Musa, Masjuri and Mohd Tahir, Musthafah and Mohamad, Imran Syakir and Othman, Md Nazri (2018) Small Scale Hydro Turbines For Sustainable Rural Electrification Program. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 49 (2). pp. 138-145. ISSN 2289-7879
Abdul Munir, Fudhail and Mohd Tahir, Musthafah and Mohd Shafie, Abdul Muhaimin and Hassan, Muhammad Zahir (2017) Development Of Numerical Model For Simulation Intake Flow In Combustion Chamber Of L-Head Engine Type. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 17 (2). pp. 134-142. ISSN 2227-2771
Wasbari, Faizil and Abu Bakar, Rosli and Gan, Leong Ming and Mohd Tahir, Musthafah and Yusof, Ahmad Anas (2017) A Review Of Compressed-Air Hybrid Technology In Vehicle System. Renewable And Sustainable Energy Reviews, 67. pp. 635-653. ISSN 1364-0321
Mohd Tahir, Musthafah and Ali, Muhammad Syahir and Mohd Shafie, Abdul Muhaimin and Abu Bakar, Rosli (2014) Simulation of single cylinder engine fuel with alternative fuel by using available software. International Review of Mechanical Engineering, 8 (4). pp. 798-802. ISSN 1970-8734
ABDULLAH, Mohd Azman and Mansor, Muhd Ridzuan and Mohd Tahir, Musthafah and Abdul Kudus, Syahibudil Ikhwan and Hassan, Muhammad Zahir and Ngadiman, Mad Nasir (2013) Design, Analysis and Fabrication of Chassis Frame for UTeM Formula VarsityTM Race Car. International Journal of Mining, Metallurgy and Mechanical Engineering (IJMMME), 1 (1). pp. 75-77. ISSN 2320 –4060
Mustaffa Albakri, Ammar Alfaiz and Hassan, Muhammad Zahir and Mohd Tahir, Musthafah and Rusnandi, Herdy and Mohd Adrinata, Shaharuzaman and Mansor, Muhd Ridzuan (2012) Design and Development of UTeM Perodua Eco-challenge Vehicle. Applied Mechanics and Materials, 165. pp. 202-208. ISSN 1660-9336
Khalid, Mohamad Kamal and Mansor, Muhd Ridzuan and Abdul Kudus, Syahibudil Ikhwan and Mohd Tahir, Musthafah and Hassan, Muhammad Zahir (2011) Performance Investigation of the UTeM Eco-Car Disc Brake System. International Journal of Engineering & Technology IJET-IJENS, 11 (6). pp. 1-6. ISSN 2077-1185
Abdul Munir, Fudhail and Sidik, N.A.C and Mohamad Zin, Mohd Rody and Hassan, Muhammad Zahir and Mohd Tahir, Musthafah (2010) Numerical Simulations of Shear Driven Square and Triangular Cavity by Using Lattice Boltzmann Scheme. World Academy of Science, Engineering and Technology, 45 (0045:2). pp. 190-194. ISSN 2010-3778
Mohd Tahir , Musthafah and Yamada , Noboru (2010) Thermodynamic Analysis of Expansion Profile for Displacement-type Expander in Low-temperature Rankine Cycle. Journal of Thermal Science and Technology, 5 (1). pp. 61-74. ISSN 1880 - 5566
Book Chapter
Mansor, Muhd Ridzuan and Akop, Mohd Zaid and Sapuan, S.M. and Mohd Tahir, Musthafah and Salim, Mohd Azli and Shaharuzaman, Mohd Adrinata (2006) Concurrent Design Of Green Composites. In: Green Approaches To Biocomposite Materials Science And Engineering. IGI Global, pp. 48-51. ISBN 9781522504245
Conference or Workshop Item
Abdullah, Mohd Azman and Mansor, Muhd Ridzuan and Mohd Tahir, Musthafah and Abdul Kudus, Syahibudil Ikhwan and Hassan, Muhammad Zahir and Ngadiman, Mad Nasir (2012) Design, Analysis and Fabrication of Chassis Frame for UTeM Formula VarsityTM Race Car. In: International Conference on Manufacturing and Industrial Engineering (ICMIE’12) Dec. 29-30, 2012, Kuala Lumpur (Malaysia), 29 - 30 December 2012, Grand Seasons Hotel, Kuala Lumpur.
Ashari, Muhamad Hafizullah and Mansor, Muhd Ridzuan and Mohd Tahir, Musthafah and Hassan, Muhammad Zahir and Mohd Adrinata, Shaharuzaman (2011) DESIGN OF A SPACE FRAME CHASSIS FOR UTEM PERODUA ECO-CHALLENGE CAR. In: International Seminar on the Application of Science & Mathematics 2011 (ISASM 2011), 1-3 November 2012, PWTC Kuala Lumpur.
Mohd Tahir, Musthafah and Abdul Kudus, Syahibudil Ikhwan and Mansor, Muhd Ridzuan and Hassan, Muhammad Zahir and Shaharuzaman, Mohd Adrinata (2011) Implementation Of Cooperative Learning In Engineering Education : A Case Study On The Utem Perodua Eco - Challenge Project. In: the 1st National Conference on Active Learning (NCAL 2011) , 10-11 December 2011, Kampus Bandar UTeM. (Submitted)
Mohd Tahir, Musthafah and Abdul Kudus, Syahibudil Ikhwan and Mansor, Muhd Ridzuan and Hassan, Muhammad Zahir and Mohd Adrinata, Shaharuzaman (2011) Implementation of Cooperative Learning in Engineering Education: A Case Study on the UTeM Perodua Eco-Challenge Project. In: 2011 1st National Conference on Active Learning - NCAL 2011, 10-11 December 2011, Kampus Bandar, Universiti Teknikal Malaysia Melaka.
Khalid, Mohamad Kamal and Mansor, Muhd Ridzuan and Mohd Tahir, Musthafah and Hassan, Muhammad Zahir and Tamaldin, Noreffendy (2011) A STUDY ON BRAKING PERFORMANCE OF UTEM ECO-CAR DISC BRAKE SYSTEM. In: International Seminar on the Application of Science & Mathematics 2011 (ISASM 2011), 1-3 November 2012, PWTC Kuala Lumpur.