Items where Author is "Mustafa, Nuzaimah "

Article

Abdul Kudus, Syahibudil Ikhwan and Syah Lubis, Abdul Munir Hidayat and Amran, Ammar Syafi and Mustafa, Nuzaimah and Mohammad Taha, Mastura and Shaharuzaman, Mohd Adrinata (2024) Flow analysis and shear rate comparison of counter-rotating and co-rotating intermeshing twin-screw extruders for filament extrusion of polypropylene-based biocomposites. Pertanika Journal of Science and Technology, 32 (S2). pp. 1-20. ISSN 0128-7680

Yusuf, Yusliza and Mustafa, Nuzaimah and Yusof, Yusra Fitri and Sulistyarini, Dwi Hadi (2024) The mechanical and physical properties of 3D printing filament made from recycled polypropylene and ground tyre rubber treated with alkali. Pertanika Journal of Science and Technology, 32 (S2). pp. 151-163. ISSN 0128-7680

Yusuf, Yusliza and Wong, Chun Yip and Mohammad Taha, Mastura and Mustafa, Nuzaimah and Che Daud, Zuraidawani (2023) New wood dust reinforced recycled polypropylene composite filament and traditional polypropylene filament for FDM applications: Life cycle assessment study. Journal of Sustainability Science and Management, 18 (9). pp. 157-170. ISSN 2672-7226

Muhammad, Noryani and Mohammad Taha, Mastura and Mustafa, Nuzaimah and Zakaria, Nazri Huzaimi and Che Hamid, Hazliza Aida and Shaharuzaman, Mohd Adrinata and Loh Y.F (2022) Statistical analysis of the performance of young's modulus of natural fiber composites and synthetic fiber composites. Jurnal Teknologi, 84 (6-2). pp. 151-162. ISSN 180–3722

Hamzah, Khairum and Ali, Farhan Afif and Khashi’ie, Najiyah Safwa and Waini, Iskandar and Mustafa, Nuzaimah and Nik Long, Nik Mohd Asri (2022) Mechanical and physical properties of sawdust reinforced epoxy resin composites. Journal of Southwest Jiaotong University, 57 (3). pp. 292-299. ISSN 0258-2724

Jumaidin, Ridhwan and Abdul Halim, Harith Hilman and Mohammad Taha, Mastura and Ab Ghani, Ahmad Fuad and Mustafa, Nuzaimah and Zakaria, Nazri Huzaimi and Abdul Kudus, Syahibudil Ikhwan and Yaakob, Mohd Yuhazri and Aziz, Alia Ruzanna and Keshavarz, Meysam and Salleh, Tuan Suhaimi and Rushdan, Ahmad Ilyas and Saleman, Abdul Rafeq and Razali, Nadlene and Abdul Munir, Fudhail and Shaharuzaman, Mohd Adrinata (2022) Thermal and mechanical properties of thermoplastic cassava starch/beeswax reinforced with cogon grass fiber. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 96 (1). pp. 53-59. ISSN 2289-7879

Hamzah, Khairum and Shamsudin, Syafiq Asraf and Ab Wahab, Norfariza and Sayed Kushairi, Sayed Nordin and Mustafa, Nuzaimah (2022) Mechanical properties of sandwich laminates composite on plywood and glass fibers. ARPN Journal Of Engineering And Applied Sciences, 17 (2). pp. 178-185. ISSN 1819-6608

Sapuan, S.M. and Mustafa, Nuzaimah and Jawaid, Mohammad and Razali, Nadlene (2020) Sodium Hydroxide Treatment Of Waste Rubber Crumb And Its Effects On Properties Of Unsaturated Polyester Composites. Applied Sciences (Switzerland), 10 (11). pp. 2-17. ISSN 2076-3417

Salit, Mohd Sapuan and Mustafa, Nuzaimah and Razali, Nadlene and Mohammad Jawaid (2020) Effect Of Surface Treatment On The Performance Of Polyester Composite Filled With Waste Glove Rubber Crumbs. Waste and Biomass Valorization, 12. pp. 1061-1074. ISSN 1877-2641

Ab Wahab, Norfariza and Samsul Mafrizal, Mohamad Nor Iqbal and Ruslan, Eliyana and Mustafa, Nuzaimah and Abdul Hadi, Dayanasari and Zahari, Madiha and Abd. Mutalib, Nurliyana (2020) Effect Of Portable Vacuum Clamping On Acrylic Pocket Machining Performance. ARPN Journal of Engineering and Applied Sciences, 15 (6). pp. 784-791. ISSN 1819-6608

Abdul Hadi, Dayanasari and Jidin, Aiman Zakwan and Ab Wahab, Norfariza and Zahari, Madiha and Abd Mutalib, Nurliyana and Johari, Siti Halma and Ahmad, Suziana and Mustafa, Nuzaimah (2019) CMOS Ring Oscillator Delay Cell Performance: A Comparative Study. International Journal of Electrical and Computer Engineering, 9 (3). pp. 1757-1764. ISSN 2088-8708

Salit, Mohd Sapuan and Mustafa, Nuzaimah and Jawaid, Mohamed and Razali, Nadlene (2019) Microstructure And Mechanical Properties Of Unsaturated Polyester Composites Filled With Waste Rubber Glove Crumbs. Fibers and Polymers, 20 (6). pp. 1290-1300. ISSN 1229-9197

Omar, Nooririnah and Raja Mohd Rasi, Raja Zuraidah and Zainudin, Mohd Harris Fadhilah and Azhari, Muhamad Azwar and Yusuf, Yusliza and Mustafa, Nuzaimah and Azlan, Umar Al Amani and Razi, M. H.F.A. and Ismail, Syahriza and Mohamad, S. (2018) Experimental Study Of Welded Joints On Steel Plate Cold-Rolled Sheet Metal Using Different Electrode Tips. Journal of Advanced Manufacturing Technology (JAMT) , 12. pp. 1-16. ISSN 1985-3157

Omar, Nooririnah and Abdullah, Rohana and ABD RAZAK , JEEFFERIE and Mustafa, Nuzaimah (2013) A REVIEW ON SUPERSONIC PARTICLE DEPOSITION AS POTENTIAL SOLUTION FOR AIRCRAFT METAL MOLD REPAIR. Global Engineers & Technologists Review, 3 (2). pp. 14-16. ISSN 2231-9700

Conference or Workshop Item

Mohamad Juoi, Jariah and Yusuf, Yusliza and Mohd Rosli, Zulkifli and Mustafa, Nuzaimah and Wan Zulkifli, Wan Amirul Shafiz and Abdul Aziz, Fariha Awatif and Abd. Wahab, Nur Umairah Afifah (2023) Recycling of glazed roof tile waste for fine aggregate in green concrete. In: Green Materials and Electronic Packaging Interconnect Technology Symposium, EPITS 2022, 14 September 2022 through 15 September 2022, Langkawi.

Omar, Nooririnah and Abdullah, Rohana and Mustafa, Nuzaimah and Azhari, Muhammad azwar (2013) REVIEW ON HIGH PRESSURE COLD SPRAY (HPCS) PROCESS AS CORROSION TREATMENT FOR AGING AIRCRAFT PART. In: International conference on engineering education 2013 , 23-25/12/2013, Madinah. (Submitted)

Mohamad, Noraiham and Mahamood, Mazlin Aida and Yaakub, Juliana and Abdul Razak, Jeefferie and Muchtar, Andanastuti and Shueb, Mohammed Iqbal and Kasim, Mohd Shahir and Mohd Abid, Mohd Asyadi Azam and Yaakob, Mohd Yuhazri and Mustafa, Nuzaimah and Toibah, Abd Rahim and Qumrul, Ahsan (2013) FUNCTIONALISATION OF ETHYLENE-PROPYLENE COPOLYMER (EPM) BY MELT GRAFTING OF MALEIC ANHYDRIDE (MAH) USING HIGH SHEAR INTERNAL MIXER. In: International Conference on the Science and Engineering of Materials, 13-14 Nov 2013, Kuala Lumpur, Malaysia.