Items where Author is "Salleh, Mohd Rizal"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 38.

Article

Yaakob, Mohd Yuhazri and Salleh, Mohd Rizal and Wan Nor Azman, Wan Ainul Syafika and Amir Mohamed, Kamarul and Salahudin, Mohamad Tahkim and Haery, Sihombing (2019) Physiognomic Characteristics Towards MPV Car Design In Kansei Engineering. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.3). pp. 224-229. ISSN 2278-3091

Mizobuchi, Akira and Abdul Aziz, Mohd Sanusi and Kasim, Mohd Shahir and Mohamad, Effendi and Salleh, Mohd Rizal and Raja Abdullah, Raja Izamshah and Ishida, Tohru (2019) Helical Micro-Hole Drilling Of Chemically Strengthened Glass Using Capsule-Shaped Electroplated Diamond Tool. Journal of Advanced Manufacturing Technology, 13 (2). pp. 69-81. ISSN 1985-3157

Mohamad, Effendi and A Rahman, Muhamad Arfauz and Salleh, Mohd Rizal and Ibrahim, Mohd Amran and Sulaiman, Mohd Amri (2019) Generation Of A Decision Support System To Enhance The Efficiency Of Lean Manufacturing. Industrial Engineering & Management Systems, 18 (2). pp. 173-181. ISSN 1598-7248

Tan, Ming Hui and Bani Hashim, Ahmad Yusairi and Salleh, Mohd Rizal (2019) Radio frequency connector insertion loss measured from 300 KHz Until 8.5 GHz by using network analyzer and mechanical calibration kits. Journal Of Engineering Science And Technology, 14 (3). pp. 1587-1600. ISSN 1823-4690

Mohamad, Effendi and Salleh, Mohd Rizal and A Rahman, Muhamad Arfauz and Sulaiman, Mohd Amri and Ishak, Anuar and Teruaki, Ito (2019) Cleaner Production Value Stream Mapping At A Chromium Plating Plant: A Case Study. International Journal Of Agile Systems And Management (IJASM), 12 (3). pp. 245-260. ISSN 1741-9174

Abdullah, Rohana and Abd Rahman, Md Nizam and Salleh, Mohd Rizal (2019) A Systematic Approach To Model Human System In Cellular Manufacturing. Journal Of Advanced Mechanical Design, Systems, And Manufacturing, 13 (1). pp. 1-11. ISSN 1881-3054

Ishak, Anuar and Mohamad, Effendi and Sukarma, Lukman and Salleh, Mohd Shukor and Salleh, Mohd Rizal and Mohamad, Noraiham and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran (2018) Cleaner Production Implementation In An E-Waste Recovery Plant By Using The Value Stream Mapping. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 55-67. ISSN 1985-3157 (Unpublished)

Sam, Mei Lee and Saptari, Adi and Salleh, Mohd Rizal and Mohamad, Effendi (2018) Comparison Between Linear Programming And Integer Linear Programming: A Review. International Journal Of Mathematics In Operational Research (IJMOR), 13 (1). pp. 91-106. ISSN 1757-5850

A Rahman, Muhamad Arfauz and Mohamad, Nor Rizan and Mustafa, Zaleha and Ismail, Syahriza and Abdul Rahman, Azrul Azwan and Abdullah, Shariman and Mohamad, Effendi and Nordin, Mohd Hisham and Salleh, Mohd Rizal (2018) Design Of Compact Pre-Pregger Machine For In House Production Of Pre-Preg Material. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 437-449. ISSN 1985-3157

Abdullah, Rohana and Hashim, Hanizam and Abd Rahman, Md Nizam and Salleh, Mohd Rizal (2018) Development Of Enterprise Human System Modelling Framework In Support Of Cellular Manufacturing Lean Operation. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (1)). pp. 235-245. ISSN 1985-3157

Razak, Muhammad Shahmi and Sulaiman, Mohd Amri and Mat, Siti Asiyah and Ramle, Zuraimi and Mohamad, Effendi and Salleh, Mohd Rizal (2017) The Effect Of Cryogenic Cooling On Surface Roughness Of Titanium Alloy: A Review. Journal Of Advanced Manufacturing Technology (JAMT), 11 (2). pp. 101-114. ISSN 1985-3157

Chiew, Tsung Heng and Jamaludin, Zamberi and Bani Hashim, Ahmad Yusairi and Rafan, Nur Aidawaty and Abdullah, Lokman and Salleh, Mohd Rizal and Arep @ Ariff, Hambali (2016) Design And Analysis Of Super Twisting Sliding Mode Control For Machine Tools. Jurnal Teknologi , 78 (10-3). pp. 25-29. ISSN 2180-3722

Osman, Edynoor and Abd Rashid , Mohd Warikh and Abd Manaf, Mohd Edeerozey and Mohamad, Effendi and Salleh, Mohd Rizal and Ito, Teruaki and Moriga, Toshihiro (2016) Hygrothermal Effect on Mechanical and Thermal Properties of Filament Wound Hybrid Composite. Journal of Advanced Manufacturing Technology (JAMT) . pp. 1-12. ISSN 1985-3157

Yusup, Muhamad Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Muhamad, Mohd Razali and Saptari, Adi (2015) Synthesizing The Domain Of Lean Practices In Manufacturing Operations : A Review. Jurnal Teknologi , 77 (1). pp. 153-162. ISSN 2180-3722

Yusup, Muhamad Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Muhamad, Mohd Razali and Saptari, Adi (2015) Synthesizing The Domain Of Lean Practices In Manufacturing Operations : A Review. Jurnal Teknologi , 77 (1). pp. 153-162. ISSN 2180-3722

Yusup, Muhamad Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Ab Rahman, Mohd Nizam (2015) The Implementation Of Cleaner Production Practices From Malaysian Manufacturers Perspectives. Journal Of Cleaner Production, 108. pp. 659-672. ISSN -

Wan Mahmood, Wan Hasrulnizzam and Yusup, Muhamad Zaki and Salleh, Mohd Rizal and Mohd Yusof, Azrul Shahimy (2015) The Relation Between Manufacturing Sustainability And Lean Production In Malaysian Industries An Initial Study. Applied Mechanics and Materials, 761 (-). pp. 560-565. ISSN -

Yusup, Muhamad Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Mohd Yusof, Azrul Shahimy (2015) Review The Influence Of Lean Tools And Its Performance Against The Index Of Manufacturing Sustainability. International Journal Of Agile Systems And Management, 8. pp. 116-131. ISSN -

Wan Mahmood, Wan Hasrulnizzam and Yusup, Mohd Zaki and Salleh, Mohd Rizal (2015) The Relation between Manufacturing Sustainability and Lean Production in Malaysian Industries - An Initial Study. Applied Mechanics and Materials, 761. pp. 560-565. ISSN 1662-7482

Yusup, Mohd Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal (2015) Review the influence of lean tools and its performance against the index of manufacturing sustainability. Int. J. Agile Systems and Management, 8 (2). pp. 116-131. ISSN 1741-9182

Yusup, Mohd Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Mohd Yusof, Azrul Shahimy (2014) The Adoption Of Lean And Cleaner Production – A Preliminary Study For Malaysia Manufacturing Industry. Applied Mechanics and Materials, 660. pp. 949-953. ISSN 1660-9336

Wan Mahmood, Wan Hasrulnizzam and Yusup, Mohd Zaki and Salleh, Mohd Rizal and Amat, Rafidah (2014) Exploring The Impacts Of Cleaner Production On Manufacturing Sustainability In Malaysia - An Initial Study. Science International-Lahore, 26 (5). pp. 1829-1833. ISSN 1013-5316

Yusup, Muhamad Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Muhamad, Mohd Razali (2014) The Influence Factor For The Successful Implementation Of Cleaner Production : A Review. Jurnal Teknologi, 67 (1). pp. 89-97. ISSN 0127-9696

Yusup, Mohd Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Mohd Razali, Muhamad (2014) The Influence Factor for the Successful Implementation of Cleaner Production: A Review. Jurnal Teknologi, UTM, 67 (1). pp. 89-97. ISSN 0127-9696

Abdullah, Lokman and Jamaludin, Zamberi and Salleh, Mohd Rizal and Abu Bakar, Baharudin and Jamaludin, Jailani and Tsung Heng, Chiew and RAFAN, NUR AIDAWATY (2014) Theoretical Analysis of Velocity and Position Loop Behaviour of Nonlinear Cascade Feedforward Controller for Positioning of XY Table Ballscrew Drive System. Advanced Materials Research, 845. pp. 831-836. ISSN 1662-8985

Yusup, Mohd Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Tukimin, Rahayu (2013) A Review on Optimistic Impact of Cleaner Production on Manufacturing Sustainability. Journal of Advanced Manufacturing Technology (JAMT) . pp. 79-99. ISSN 1985-3157

Yusup, Mohd Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Mohamed, Norhafiza (2013) THE TRANSLATIONAL PROCESS OF CLEANER PRODUCTION STRATEGIES. GLOBAL ENGINEERS & TECHNOLOGISTS REVIEW, 3 (5). pp. 29-39. ISSN 2231-9700

Yusup, Mohd Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Mohd Rosdi, Mohd Noor Hanif (2013) THE TRIGGER SIGNAL FOR LEAN PRODUCTION PRACTICES : A REVIEW. GLOBAL ENGINEERS & TECHNOLOGISTS REVIEW, 3 (6). pp. 23-32. ISSN 2231-9700

Mohamad, Effendi and Salleh, Mohd Rizal (2012) Simulation Study Towards Productivity Improvement for Assembly Line. Journal of Human Capital Development, 5 (2). pp. 59-69. ISSN 1985-7012

Saptari, Adi and Salleh, Mohd Rizal and Wong, Soon Lai (2011) Jig Design,Assembly Line Design And Work Station Design And Their Effect To Productivity. Jordan Journal of Mechanical and Industrial Engineering, 5 (1). pp. 9-16. ISSN 1995-6665

Mohamad, Effendi and Sobiren, Norhaslina and Saptari, Adi and Salleh, Mohd Rizal (2009) The Implementation Of Risk Management At Aerospace Manufacturing Company. Journal of Human Capital Development, 2 (1). pp. 25-36. ISSN ISSN: 1985-7012

Conference or Workshop Item

Ito, Teruaki and Mohamad, Effendi and Salleh, Mohd Rizal (2013) A Student Mobility Program through Cross Cultural and Technical Exposure. In: JSME No.13-205 The 13th Design Engineering Workshop 2013, 28-30 November 2013, Kitakyushu, Japan.

Sivarao, Subramonian and Aziz, Alif and Hambali, A and Salleh, Mohd Rizal and T.J.S, Anand and Raja, Izamshah and Nur, izan and A.R.M, Warikh (2013) SUPER ENERGY SAVING LOCKING SYSTEM (SES- LOCK). In: Program Pemindahan Ilmu (KTP01), 21 Ogos, Bangi Malaysia.

Abdullah, Lokman and Jamaludin, Zamberi and Salleh, Mohd Rizal and Abu Bakar, Baharudin and Maslan, Mohd Nazmin and Tsung Heng, Chiew and RAFAN, NUR AIDAWATY (2013) Design and Analysis of Self-tuned Nonlinear PID Controller for XY Table Ballscrew Drive System. In: 2nd International Symposium on Computer, Communication, Control and Automation (3CA 2013), 1 - 2 December 2013, Holiday Inn Atrium, Singapore.

Kasim, Mohd Shahir and Salleh, Mohd Rizal and Sivarao, Subramonian (2008) Experimental Investigation of Significance Parameters in Surface Grinding – Quality Evaluation. In: National Conference on Design & Concurrent Engineering, 28-29 October 2008, Melaka.

Kasim, Mohd Shahir and Salleh, Mohd Rizal and Abd Rahman, Ammar and Abd Rahim, Nurul Hidayah (2008) An Investigation of the Impact of Cylindrical Grinding Parameters on Surface Roughness. In: National Conference on Design & Concurrent Engineering, 28-29th October 2008, Melaka.

Book

Abd Rahman, Ammar and SUBRAMONIAN, SIVARAO and Minhat, Mohamad and Abd. Rahman, Md. Nizam and Salleh, Mohd Rizal (2013) Manufacturing Process Volume 1. Penerbit Universiti UTeM.

Technical Report

Alwi @ Suhaimi, Saifulza and Salleh, Mohd Rizal and Jaafar, Hazriq Izzuan and Ab Ghani, Mohd Ruddin and Md Fauadi, Muhammad Hafidz Fazli (2019) A Novel Approach Of Groebner Bases Computation For Safety Analysis Of Distributed Discrete Controllers. [Technical Report] (Submitted)

This list was generated on Fri Dec 9 19:46:25 2022 +08.