Items where Author is "Sudin, Mohd Nizam "

Md Daud, Nazri and Sudin, Mohd Nizam and Zakaria, Mohd Shukri (2022) Flow analysis of airfoil with mechanical slat and flap using CFD. Journal of Engineering and Technology, 13 (1). pp. 73-82. ISSN 2180-3811

Ramli, Faiz Redza and Sudin, Mohd Nizam and Alkahari, Mohd Rizal and Che Mat, Muhammad Arifuddin and Herawan, Safarudin Ghazali (2022) The effect of tensile strength and surface roughness by varying oxygen level in 3D printer chamber. Jurnal Tribologi, 33. pp. 80-96. ISSN 2289-7232

Sudin, Mohd Nizam and Md Daud, Nazri and Yusuff, Mohd Asri (2022) A comparison of the flexural properties of PLA and ABS printed parts. Journal of Engineering and Technology, 13 (2). pp. 1-13. ISSN 2180-3811

Salim, Mohd Azli and Hosnie, Aina Natasha and Masripan, Nor Azmmi and Md. Saad, Adzni and Sudin, Mohd Nizam and Naroh, Azmi and Feng, Dai (2021) Characterisation of mechanical-electrical properties of graphene nanoplatelets filled epoxy as conductive ink in various patterns. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 439-456. ISSN 1985-5761

Shamsudin, Shamsul Anuar and Abd Aziz, Muhammad Syahril and Sudin, Mohd Nizam and Ismail, Mohd. Farid and Huthaifa Ahmad Al-Issa (2021) Performance Of Thermal Electric Cooling (TEC) Air Condition For A Small Office Space. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 395-412. ISSN 1985-5761

Salim, Mohd Azli and Mokhlis, Maizura and Masripan, Nor Azmmi and Md. Saad, Adzni and Sudin, Mohd Nizam and Dai, Feng and Naroh, Azmi (2021) Characterisation of mechanical-electrical properties of graphene nanoplatelets filled epoxy as conductive ink. Defence S and T Technical Bulletin, 14 (1). pp. 26-42. ISSN 1985-6571

Salim, Mohd Azli and Ab Wahid, Ameeruz Kama and Omar, Ghazali and Masripan, Nor Azmmi and Md. Saad, Adzni and Sudin, Mohd Nizam and Dobrota, Dan and Naroh, Azmi (2020) Driving monitoring system application with stretchable conductive inks: A review. International Journal of Nanoelectronics and Materials, 13 (SI). pp. 327-346. ISSN 1985-5761

Salim, Mohd Azli and Omar, Ghazali and Masripan, Nor Azmmi and Md. Saad, Adzni and Sudin, Mohd Nizam and Mokhlis, Maizura and Caridi, Francesco (2020) Nanoindentation Of Graphene Reinforced Epoxy Resin As A Conductive Ink For Microelectronic Packaging Application. International Journal of Nanoelectronics and Materials, 13 (SI). pp. 407-418. ISSN 1985-5761

Salim, Mohd Azli and Ismail, Norhisham and Masripan, Nor Azmmi and Md. Saad, Adzni and Sudin, Mohd Nizam and Naroh, Azmi and Caridi, Francesco (2020) Resistivity Characterization For Carbon Based Conductive Nanocomposite On Polyethylene Terephthalate And Thermoplastic Polyurethane Substrates. International Journal of Nanoelectronics and Materials, 13 (SI). pp. 315-326. ISSN 1985-5761

Salim, Mohd Azli and Md. Saad, Adzni and Sudin, Mohd Nizam and Rosszainily, Intan Raihan Asni and Dmitriev, Andrey N. (2020) Test load determination on composite standard Malaysian rubber constant viscosity 60 for earthquake isolator. International Journal of Nanoelectronics and Materials, 13 (SI). pp. 347-362. ISSN 1985-5761

Salim, Mohd Azli and Md. Saad, Adzni and Sudin, Mohd Nizam and Rosszainily, Intan Raihan Asni and Donik, Crtomir and Mohd Yusof, Norbazlan (2020) Investigation of the mechanical properties of standard Malaysian rubber with constant viscosity and epoxidised natural rubber using nano-indentation test. Defence S and T Technical Bulletin, 13 (1). pp. 104-116. ISSN 1985-6571

Mat Dan, Reduan and Putra, Azma and Sudin, Mohd Nizam and Abdul Hamid, Abdul Hakim and Mazlan, Rozdman Khaidir (2019) Wear Behaviour Of A-C: H Helical Gear Through Particle Generation. Defence S and T Technical Bulletin, 12 (1). 161 - 175. ISSN 1985-6571

Alkahari, Mohd Rizal and Mazlan, Siti Nur Humaira and Ramli, Faiz Redza and Maidin, Nurul Ain and Sudin, Mohd Nizam and Zolkaply, Ardzatul Ruziah (2018) Surface Finish And Mechanical Properties Of Fdm Part After Blow Cold Vapor Treatment. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 48. pp. 148-155. ISSN 2289-7879

Alkahari, Mohd Rizal and Ramli, Faiz Redza and Faudzie, M. S. M and Nazan, Muhammad Afdhal and Sudin, Mohd Nizam and Mat, Shafizal and Khalil, Siti Nurhaida (2018) Dimensional Accuracy And Surface Roughness Of Part Features Manufactured By Open Source 3D Printer. ARPN Journal Of Engineering And Applied Sciences, 13. p. 1139. ISSN 1819-6608

Nazan, Muhammad Afdhal and Ramli, Faiz Redza and Alkahari, Mohd Rizal and Sudin, Mohd Nizam and Abdullah, M. A. (2017) Process Parameter Optimization Of 3D Printer Using Response Surface Method. ARPN Journal Of Engineering And Applied Sciences, 12 (7). pp. 2291-2296. ISSN 1819-6608

Sudin, Mohd Nizam and Shamsuddin, Shamsul Anuar and Musthafah, Mohd Tahir and Faiz Redza , Ramli (2014) Topology Optimization in Automotive Brake Pedal Redesign. International Journal of Engineering and Technology (IJET), 6 (1). pp. 398-402. ISSN 0975-4024

Sudin, Mohd Nizam and ABDULLAH, Mohd Azman and Ramli, Faiz Redza and Musthafah, Mohd Tahir and Shamsudin, Shamsul Anuar (2014) Review of Research on Vehicles Aerodynamic Drag Reduction Methods. International Journal of Mechanical and Mechatronics Engineering, 14 (2). pp. 35-47. ISSN 2077-124X

Abdullah, Mohd Azman and Tamaldin, Noreffendy and Ramli, Faiz Redza and Sudin, Mohd Nizam and Mohamed Muslim, Abdul Mu'in (2014) Analysis Of The Chassis And Components Of All Terrain Vehicle (ATV). Applied Mechanics and Materials, 660. pp. 753-757. ISSN 1660-9336

Abdullah, Mohd Azman and Tamaldin, Noreffendy and Ramli, Faiz Redza and Sudin, Mohd Nizam and Mohamed Muslim, Abdul Mu'in (2014) Design And Development Of Low Cost All Terrain Vehicle (ATV). Applied Mechanics and Materials, 663 (-). pp. 517-521. ISSN 1660-9336

Sudin, Mohd Nizam (2013) User-Centred Design Approach in Designing Motorcycle Tire Dismounting Tool for One-Handed User. International Journal of Engineering and Technology (IJET), 5 (4). pp. 3588-3595. ISSN 0975-4024

Sudin, Mohd Nizam and Zamani, Safwan (2013) Conceptual Design of a Motorcycle Tire Dismounting Tool for One-Handed User. Journal of Mechanical Engineering and Technology, 5 (1). pp. 1-10. ISSN 2180-1053

Sudin, Mohd Nizam (2010) THE ROLE OF A SPECIFICATION IN THE DESIGN PROCESS: A CASE STUDY. In: INTERNATIONAL DESIGN CONFERENCE - DESIGN 2010, 17-20 May 2010, Dubrovnik - Croatia.

Sudin, Mohd Nizam and Harun, Mohd Ruzi and Shamsuddin, Shamsul Anuar (2007) A PROTOTYPE OF KBS FOR MATERIAL SELECTION IN BUMPER BEAM DESIGN. Suranaree J. Sci. Technol., 14 (3). pp. 215-222. ISSN x

Sudin, Mohd Nizam (2005) A note on the conceptual design of polymeric composite automotive bumper system. Journal of Materials Processing Technology, 159. pp. 145-151. ISSN 0924-0136