Items where Author is "Sulaiman, Mohd Amri"

Mohamad, Effendi and A Rahman, Muhamad Arfauz and Salleh, Mohd Rizal and Ibrahim, Mohd Amran and Sulaiman, Mohd Amri (2019) Generation Of A Decision Support System To Enhance The Efficiency Of Lean Manufacturing. Industrial Engineering & Management Systems, 18 (2). pp. 173-181. ISSN 1598-7248

Mohamad, Effendi and Salleh, Mohd Rizal and A Rahman, Muhamad Arfauz and Sulaiman, Mohd Amri and Ishak, Anuar and Teruaki, Ito (2019) Cleaner Production Value Stream Mapping At A Chromium Plating Plant: A Case Study. International Journal Of Agile Systems And Management (IJASM), 12 (3). pp. 245-260. ISSN 1741-9174

Abd Rahman, Md Nizam and Muhamad, Mohd Razali and Sulaiman, Mohd Amri and Hashim, Zarifah Syazana and Fadzil, Ahmad Anuar and Budi, Esmar (2018) Copper Layer Sheet Resistance Evolution As A Function Of Post-Seed Process Self-Annealing Time. Journal of Advanced Manufacturing Technology, 12 (SI4). pp. 15-24. ISSN 1985-3157

Liew, Pay Jun and Mohd Hajazi, Aini Syahida and Shaaroni, Ainusyafiqah and Sulaiman, Mohd Amri and Raja Abdullah, Raja Izamshah (2018) Investigation Of Effects Of Carbon Nanofiber Nanofluid In Drilling Of AISI 304 Stainless Steel. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 491-500. ISSN 1985-3157

Sulaiman, Mohd Amri and Mat, Siti Asiyah and Razak, Muhammad Shahmi and Ramle, Zuraimi and Mohamad, Effendi and Che Haron, Che Hassan and A Ghani, Jaharah (2018) Performance Of CVD Coated Carbide Tool By Optimizing Machining Parameters During Turning Titanium Alloy Ti-6AL-4V ELI In Flooded Condition. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 401-412. ISSN 1985-3157

Liew, Pay Jun and Shaaroni, Ainusyafiqah and Abd Razak, Jeefferie and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2017) Optimization Of Cutting Condition In The Turning Of AISI D2 Steel By Using Carbon Nanofiber Nanofluid. International Journal of Applied Engineering Research, 12 (10). pp. 2243-2252. ISSN 0973-4562

Salleh, Mohd Shukor and Ishak, Anuar and Mohamad, Effendi and Sukarma, Lukman and Mahmood, Azmi B.R. and A Rahman, Muhamad Arfauz and Yahaya, Saifudin Hafiz and Salleh, Mohd Shukor and Sulaiman, Mohd Amri (2017) Cleaner Production Implementation Using Extended Value Stream Mapping For Enhancing The Sustainability Of Lean Manufacturing. Journal of Advanced Manufacturing Technology (JAMT) , 2289-8 (1). pp. 47-60. ISSN 1985-3157

Razak, Muhammad Shahmi and Sulaiman, Mohd Amri and Mat, Siti Asiyah and Ramle, Zuraimi and Mohamad, Effendi and Salleh, Mohd Rizal (2017) The Effect Of Cryogenic Cooling On Surface Roughness Of Titanium Alloy: A Review. Journal Of Advanced Manufacturing Technology (JAMT), 11 (2). pp. 101-114. ISSN 1985-3157

Mohamad Ishak, Nurul Naili and Salleh, Mohd Shukor and Yahaya, Saifudin Hafiz and Mohamad, Effendi and Sulaiman, Mohd Amri (2017) The Effect of Equal Channel Angular Pressing (ECAP) on the Microstructure and Hardness of A356 Aluminium Alloy. Journal Of Advanced Manufacturing Technology (JAMT), 11 (2). pp. 47-57. ISSN 1985-3157

Safian, Mohd Azizul Hikmi and Salleh, Mohd Shukor and Subramonian, Sivarao and Hussein, Nur Izan Syahriah and Sulaiman, Mohd Amri and Yahaya, Saifudin Hafiz (2017) Production Of LM4 Feedstock For Thixoforming By Using Cooling Slope Casting. Journal Of Advanced Manufacturing Technology (JAMT) , 11 (1). pp. 77-90. ISSN 1985-3157

Che Haron, Che Hassan and Sulaiman, Mohd Amri and A Ghani, Jaharah and Kasim, Mohd Shahir and Mohamad, Effendi (2016) Performance Of Carbide Tool In High Speed Turning Of TI-6AL-4V ELI Under Conventional Coolant And Minimal Quantity Lubrication. ARPN Journal Of Engineering And Applied Sciences, 11 (7). pp. 4817-4821. ISSN 1819-6608

A Ghani, Jaharah and Che Haron, Che Hassan and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Tomadi, Siti Haryani (2016) Wear Mechanism Of Coated And Uncoated Carbide Cutting Tool In Machining Process. Journal Of Materials Research, 31 (13). pp. 1873-1879. ISSN 0884-2914

Kasim, Mohd Shahir and Atan, Mohamad Hazizan and Che Haron, Che Hassan and A Ghani, Jaharah and Sulaiman, Mohd Amri and Mohamad, Effendi and Mohamad, Minhat and Abu Bakar, Mohd Hadzley and Saedon, Juri (2015) Analysis Of Tool Performance During Ball-End Milling Of Aluminium Alloy 6061-T6. Applied Mechanics and Materials, 761. pp. 318-323. ISSN 1662-7482

Ibrahim, Mohamad Amran and Mohamad, Effendi and Arzmi, Muhammad Hazwan and A Rahman, Muhamad Arfauz and Saptari, Adi and Shibghatullah, Abdul Samad and Sulaiman, Mohd Amri and Md Ali, Mohd Amran (2015) Enhancing efficiency of die exchange process through single minute of exchanging die at a textile manufacturing company in Malaysia. Journal of Applied Sciences. pp. 456-464. ISSN 1812-5654

Md Ali, Mohd Amran and K.M, Faizal and Salleh, Mohd Shukor and Sulaiman, Mohd Amri and Mohamad, Effendi (2015) Design Consideration For Design A Flat And Ring Plastics Part Using Solidworks Software. IOP Conference Series: Materials Science And Engineering, 100 (1). pp. 1-9. ISSN 1757-8981

Raja Abdullah, Raja Izamshah and Yu, Aaron Lung and Mohamad, Effendi and Mohd Abid, Mohd Asyadi 'Azam and Sulaiman, Mohd Amri and Liew, Pay Jun and Abdul Aziz, Mohd Sanusi (2015) Optimization Of Milling Parameter For Untreated And Heat Treated Polyetheretherketones (PEEK) Biomaterials. Applied Mechanics And Materials, 761. pp. 293-297. ISSN 1662-7482

Raja Izamshah Raja Abdullah (2014) A plastic wall tile and method of manufacturing thereof. PI 2014703490.

Minhat, Mohamad and Sulaiman, Mohd Amri and Kasim, Mohd Shahir (2014) RETROFITTING A CONVENTIONAL LATHE TO A DIGITAL INTELLIGENCE SYSTEM. Journal of advanced Manufacturing Technology (AMT). pp. 1-8. ISSN Nil (Submitted)

Md Ali, Mohd Amran and Raja Abdullah, Raja Izamshah and Hussein, Nur Izan Syahriah and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Salleh, Mohd Rizal and Mohamad, Effendi and Subramonian, Sivarao and Liew, Pay Jun and Abdullah, Zulkeflee (2014) Performance of wire-EDM parameters on machining characteristics of titanium alloy (Ti6Al4V) using Taguchi method. In: Malaysia University Conference Engineering Technology 2015, 10-11 November 2014, Melaka.

Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Mohamad, Effendi and Abu Bakar, Mohd Hadzley and Minhat, Mohamad (2014) Analysis of Tool Performance during Ball-end Milling of Aluminium Alloy 6061-T6. In: iDECON 2014 – International Conference on Design and Concurrent Engineering, 21 - 23 September 2014, Melaka.

Minhat, Mohamad and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) RETROFITTING A CONVENTIONAL LATHE TO A DIGITAL INTELLIGENCE SYSTEM. In: International Conference on Artificial Intelligence and Computer Science (AICS 2014), 15 - 16 September 2014, Bandung, Indonesia.

Md Ali, Mohd Amran and Salmah, Siti and Zaki, Mohd and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) The Effect of Pressure on Warpage of Dumbbell Plastic Part in Injection Moulding Machine. Advanced Materials Research, 903. pp. 61-66. ISSN 1662-8985

Sulaiman, Mohd Amri and Kasim, Mohd Shahir (2014) Effect of high-speed parameters on uncoated carbide tool in finish turning Titanium Ti-6Al-4V ELI. Sains Malaysiana, 43. pp. 111-116. ISSN 0126-6039

Raja Abdullah, Raja Izamshah and Hassan, Zulhairy and Kasim, Mohd Shahir and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Sulaiman, Mohd Amri and Subramonian, Sivarao (2014) Cutter Path Strategies For Shoulder Milling Of Thin Deflecting Walls. Advanced Materials Research, 903 (-). pp. 175-180. ISSN 1662-8985

Raja Abdullah, Raja Izamshah and Mohd Nawawi, Nurul Husna and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) Effects Of Cutter Geometrical Features On Machining Polyetheretherketones (PEEK) Engineering Plastic. Journal of Mechanical Engineering and Sciences (JMES), 6 (-). pp. 863-872. ISSN 2289-4659

Abu Bakar, Mohd Hadzley and Ahmad, Siti Sarah Nadia and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Mohamad Raffi, Nurul Fatin (2014) Evaluation Of The Surface Integrity When Machining LM6 Aluminum Metal Matrix Composites Using Coated And Uncoated Carbide Cutting Tools. Applied Mechanics and Materials, 465-16 (-). pp. 1049-1053. ISSN 1660-9336

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Ahmad, Siti Sarah Nadia and Mohamad Raffi, Nurul Fatin (2014) Surface Integrity Of LM6 Aluminum Metal Matrix Composite When Machined With High Speed Steel And Uncoated Carbide Cutting Tools. Journal of Mechanical Engineering and Sciences (JMES), 6 (-). pp. 854-862. ISSN 2289-4659

Md Ali, Mohd Amran and Mohd Sani, Siti Salmah and Mohd, Zaki and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) The effect of pressure on warpage of dumbbell plastic part in injection moulding machine. Applied Mechanics and Materials, 529. pp. 61-66. ISSN 1662-7482.

Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Md. Ali, Mohd Amran and Abdul Aziz, Mohd Sanusi and Mohamad, Noraiham and Raja, Izamshah (2013) Prediction of Cutting Force in End Milling of Inconel 718. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET), 3-4 December 2013, Kuantan, Pahang. (Submitted)

Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Gusri, Akhyar Ibrahim and Mohd Zaid, Abdul Yazid and Sulaiman, Mohd Amri (2013) Tool Life Of TiAlN PVD Coated Carbide Tool In High-Speed End Milling Of Untreated Inconel 718 Under Minimum Quantity Lubrication Condition. Sains Malaysiana, 42 (12). pp. 1721-1726. ISSN 0126-6039

Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2013) Cutting Performances of Coated PVD in High Speed End Milling of Aged Inconel 718. Materials Science Forum, 773-774. pp. 653-660. ISSN 1662-9752

Mohd , amran and Salmah, Siti and Hussein, Nur Izan Syahriah and Raja, Izamshah and Mohd , Hadzley and Sivarao, Subramonian and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2013) Effects of Machine Parameters on Surface Roughness Using Response Surface Method in Drilling Process. In: Malaysian International Tribology Conference , November 18-20, 2013, Kota Kinabalu, Sabah, Malaysia.

Kasim, Mohd Shahir and Sulaiman, Mohd Amri and RAJA ABDULLAH, RAJA IZAMSHAH (2013) Assessment of environmental friendly application of biodegradable MQL coolant in end milling of Inconel 718. In: 16th Conference of the European Roundtable on Sustainable Consumption and Production (ERSCP), 4-7 June 2013, Istanbul, Turki.

Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2013) Wear mechanism and notch wear location prediction model in ball nose end milling of Inconel 718. Wear, 302 (1-2). pp. 1171-1179. ISSN 0043-1648

Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2013) Prediction Surface Roughness in High-Speed Milling of Inconel 718 Under Mql Using Rsm Method. Middle-East Journal of Science Research, 13 (3). pp. 264-272. ISSN 1990-9233

Sulaiman, Mohd Amri and Kasim, Mohd Shahir (2012) The Study Of Wear Process On Uncoated Carbide Cutting Tool In Machining Titanium Alloy. Journal of Applied Sciences Research. pp. 4821-4827. ISSN 1819-544X

Che Haron, Che Hassan and A Ghani, Jaharah and Sulaiman, Mohd Amri and Lutfiah Intan and Kasim, Mohd Shahir (2011) The Effect Of Minimal Quantity Lubrication (MQL) On The Surface Roughness Of Titanium Alloy Ti-6Al-4V ELI In Turning Process. Advanced Materials Research Journal, 146-14 (1750). pp. 1750-1753. ISSN 10.4028

Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2011) Surface Integrity of Inconel 718 under MQL condition. Advanced Materials Research, 150-15. 1667 -1672. ISSN 1022-6680

Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2010) TOOL LIFE INVESTIGATION IN DRY TURNING OF INCONEL 718 WITH PVD TiAlN-COATED WC INSERT. In: Conference on Engineering and Technology Education, 2nd – 5th August 2010, Kuching, Sarawak.