Browse By Repository:

 
 
 
   

Items where Division is "Library > Tesis > FKM" and Year is 2017

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Jump to: Thesis
Number of items: 30.

Thesis

A. Hamid, Husna (2017) Physiochemical Evaluation And Tribological Properties Of Eco-Friendly Biodegradable Novel Biolubricant From Banana Peel Wastes. PhD thesis, Universiti Teknikal Malaysia Melaka .

Abdelgader Agilah Saleh, Gheidan (2017) Investigation of effects of combustor wall thickness on the flame stabilization limits for micro combustors with wire mesh. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Rashid, Nur Saidatul Fatimah (2017) Friction And Wear Characteristics Of Bio-Lubricant Enhanced With hBN And PKAC Additives. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Adli Zil Ikram (2017) Optimization Of MWCNT Mixture In MicroPCM Composite For Thermal Performance Testing At Different Ambient Temperature. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ali, Ahmad Nazrin (2017) Energy Simulation Analysis For Lighting In An Academic Building. Masters thesis, Universiti Teknikal Malaysia Melaka.

Almangush, Hamida Mohamed (2017) Multilayer Reversible Data Hiding Via Histogram Shifting. PhD thesis, Universiti Teknikal Malaysia Melaka.

Baharin, Bahrom (2017) Thermal Stress Effect On Disc Brake Rotor For NGV Vehicle. Masters thesis, Universiti Teknikal Malaysia Melaka.

Faris, Azman (2017) Numerical simulation of defogging on automotive windshield. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ibrahim, Asriana (2017) Modeling Of Dynamic Behavior In Closed Crack And Nonlinear Ultrasonic Array Imaging. PhD thesis, Universiti Teknikal Malaysia Melaka.

Jaafar, Yusra Liyana (2017) Characterization Of Biomechanical Properties Of Articular Cartilage Across Synovial Joint. Masters thesis, Universiti Teknikal Malaysia Melaka.

Loh, Xiao Hui (2017) Compression Molded Kenaf/Polypropylene (K/PP) Composite : Determination Of Impact Properties Using Design Of Experiment (DOE) Analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Low, Pei Sing (2017) Effect Of Stiffness Nonlinearity On The Transduction Coefficient Of A Vibration Based Electromagnetic Energy Harvesting Device. Masters thesis, Universiti Teknikal Malaysia Melaka.

Manaf, Fakhir Hussain (2017) Thermal comfort and energy consumption analysis for engineering laboratory building in UTeM. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Fauzi, Muhammad Fathi (2017) Development Of A Novel Engine Starter Using A Compression Spring. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Yusof, Humairak (2017) The Effect Of Storage Duration And Variance Temperature On High Blend Level Biodiesel Fuel Properties. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamed Jamil, Fathiah (2017) Multi-Order PID Controller Design For Active Anti-Roll Suspension System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Shafie, Abdul Muhaimin (2017) CFD Analysis Of Intake Flow In The L-Head Engine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mokhtar, Nur Hazwani (2017) Driver Recognition And Reaction To Unintended Acceleration. PhD thesis, Universiti Teknikal Malaysia Melaka.

Mustafa, Ashafi'e (2017) Selection And Optimization Of Kenaf/Epoxy Composite As An Alternative Friction Material. Masters thesis, Universiti Teknikal Malaysia Melaka.

Naji, Ihab Munther (2017) Investigation On Waste Materials As Thermal Insulation For Building. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ngah Nasaruddin, Afiqah (2017) Low Cost Natural Convection Solar Dryer For Drying Durian Tree Wood. Masters thesis, Universiti Teknikal Malaysia Melaka.

Norazni, Nor Shazwan Azrul (2017) Simulation Study On Transverse Vibration For Automotive Absorber. Masters thesis, Universiti Teknikal Malaysia Melaka.

Othman, Muhamad Naim (2017) Multi-Objectives Optimization Of Energy Consumption Of IKM Bintulu Buildings Towards Energy Saving. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rafan, Nur Aidawaty (2017) Stick Slip Friction Models Control Design Approach For Friction Compensation In Machine Tools Drive System. PhD thesis, Universiti Teknikal Malaysia Melaka.

Razali, Nadlene (2017) Development And Characterization Of Roselle Fibre Reinforced Vinyl Ester Composites. PhD thesis, Universiti Teknikal Malaysia Melaka.

Selvam, Manimaran (2017) Investigation Of Modified Shielded Metal Arc Welding (MOSMAW) For Weld Penetration Performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Shuhimi, Fairuz Fazillah (2017) Wear Failure Analysis Of Empty Fruit Bunch And Kenaf Fibres Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sukri, Mohamad Firdaus (2017) Simulation And Analysis Of A Direct Current Operated Automotive Air-Conditioning System. PhD thesis, Universiti Teknikal Malaysia Melaka.

Yew, Wansin (2017) Study Of Biomechanical Properties Of Articular Cartilage Using Low-Field Magnetic Resonance Imaging. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainuddin, Hikmah (2017) Impact Test Simulation Of Automotive Wheel Rim Using Finite Element Analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

This list was generated on Mon Sep 23 16:52:54 2019 MYT.