Items where Division is "Faculty of Mechanical and Manufacturing Engineering Technology" and Year is 2020

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | H | I | J | K | L | M | N | P | R | S | T | W | Y | Z
Number of items: 56.

A

Ab Ghani, Ahmad Fuad and Jumaidin, Ridhwan and Hussin, Mohamed Saiful Firdaus and Dhar Malingam, Sivakumar and Abdul Munir, Fudhail and Ranom, Rahifa and Mahmud, Jamaluddin (2020) Digital Image Correlation (DIC) And Finite Element Modelling (FEM) Assessment On Hybrid Composite Carbon Glass Fibre Under Tensile And Flexural Loading. International Journal of Mechanical & Mechatronics Engineering, 20 (3). pp. 82-90. ISSN 2077-124X

Ab Ghani, Ahmad Fuad and Ramli, Mohd Irman and Jumaidin, Ridhwan and Dhar Malingam, Sivakumar and Abdul Munir, Fudhail and Yob, Mohd Shukri (2020) Parametric Study On Volume Fraction Of Representative Volume Element (RVE) CFRP AND GFRP Towards Tensile Properties. Malaysian Journal Of Applied Sciences, 5 (2). pp. 17-29. ISSN 0127-9246

Ab Rahman, Mohd Hidayat and Ahmad, Umi Hayati and Jumaidin, Ridhwan and Osman, Mohd Hairizal and Wahid, Mohammad Khalid and Maidin, Nurul Ain and Ahmad, Mohd Nazri and Mohd Basri, Mohd Salahuddin (2020) Design And Development Of Ergonomic Table And Analyze Using Rula Analysis. Malaysian Journal of Public Health Medicine, 20 (SI 1). pp. 138-144. ISSN 1675-0306

Ab Wahab, Norfariza and Mustaza, Mohammad Nor and Hassan, Muhammad Zahir and Mohd Najib, Suhaila and Abu Kassim, Khairil Anwar (2020) Development Of Smart Vehicle Blind Spot Detection System Based On 24 GHz Radar Sensors. International Journal of Engineering and Advanced Technology, 9 (3). pp. 2726-2730. ISSN 2249-8958

Ahmad, Mohd Nazri and Wahid, Mohammad Khalid and Maidin, Nurul Ain and Ab Rahman, Mohd Hidayat and Osman, Mohd Hairizal and Alis@Elias, Izzati Fatin (2020) Mechanical Characteristics Of Oil Palm Fiber Reinforced Thermoplastics As Filament For Fused Deposition Modeling (FDM). Advances in Manufacturing, 8 (1). pp. 72-81. ISSN 2095-3127

Azlan, Khairul Azri and Omar, Mohammad Rafi and Hussin, Mohamed Saiful Firdaus and Abdullah, Muhammad Ilman Hakimi Chua and S. Chinniah, Eswaran (2020) Measurement Accuracy Assessment For Laser Triangulation 3D Scanning Machine. International Journal of Recent Technology and Engineering, 8 (6). pp. 2789-2793. ISSN 2277-3878

H

Hamzah, Khairum and Nik Long, Nik Mohd Asri and Senu, Norazak and Eshkuvatov, Zainiddin K. (2020) Mode Stresses For A Thermally Insulated Curve Crack In Bonded Two Half Planes. Menemui Matematik (Discovering Mathematics), 42 (1). pp. 34-44. ISSN 2231-7023

I

Ifayefunmi, Olawale and Ismail, Mohd Shahrom and Sheikh Md Fadzullah, Siti Hajar and Johar, M (2020) Buckling of imperfect cone-cylinder transition subjected to external pressure. International Journal of Pressure Vessels and Piping, 187. pp. 1-12. ISSN 0308-0161

Ifayefunmi, Olawale and Mahidan, Fairuz Mardhiah (2020) Further Experiments On Buckling Of Cones With Imperfect Length Subjected To Axial Compression. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 10 (2). pp. 65-76. ISSN 2249-6890

Ifayefunmi, Olawale and Mahidan, Fairuz Mardhiah and Maslan, Mohamad Haidir (2020) Instability Of Conical Shells With Multiple Dimples Under Axial Compression. International Journal Of Recent Technology And Engineering (IJRTE), 8 (5). 1022-1027.. ISSN 2277-3878

Ifayefunmi, Olawale and Mazli, Amirul Husaini and Ismail, Mohd Shahrom (2020) Combined Stability Of Cone-Cylinder Transition Subjected To Axial Compression And External Pressure. Thin-Walled Structures, 157. pp. 1-14. ISSN 0263-8231

Ifayefunmi, Olawale Friday (2020) Buckling Experiments Of Cracked Axially Compressed Cones. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 10 (3). pp. 5665-5674. ISSN 2249–6890

Ifayefunmi, Olawale Friday and Ismail, Mohd Shahrom (2020) An Overview Of Buckling And Imperfection Of Cone-Cylinder Transition Under Various Loading Condition. Latin American Journal of Solids and Structures, 17 (8). pp. 1-21. ISSN 1679-7817

Ifayefunmi, Olawale Friday and Mahidan, Fairuz Mardhiah (2020) Buckling Of Cracked Cones Subjected To Axial Compression. Latin American Journal of Solids and Structures, 17 (9). pp. 1-13. ISSN 1679-7817

Ifayefunmi, Olawale Friday and Mahidan, Fairuz Mardhiah and Abu Bakar, Norinni (2020) Buckling Of Axially Compressed Imperfect Steel Cones With Local Dents. International Journal of Mechanical and Production Engineering Research and Development, 10 (3). pp. 10807-10816. ISSN 2249–6890

Iliyas Ahmad, Maznah and Yusof, Yusri and Abdul Kadir, Aini Zuhra and Saif, Yazid and Daud, Md Elias and Latif, Kamran (2020) Machine Monitoring System: A Decade In Review. The International Journal of Advanced Manufacturing Technology, 108 (11-12). pp. 3645-3659. ISSN 0268-3768

Ilyas, R. A. and Sapuan, S. M. and Zainudin, E. S. and Ibrahim, Rushdan and Abral, Hairul and Ishak, M. R. and A. Atiqah, A. Atiqah and M. S. N. Atikah, M. S. N. Atikah and Edi Syafri, Edi Syafri and Mochamad Asrofi, Mochamad Asrofi and Jumaidin, Ridhwan (2020) Thermal, Biodegradability And Water Barrier Properties Of Bio-Nanocomposites Based On Plasticised Sugar Palm Starch And Nanofibrillated Celluloses From Sugar Palm Fibres. Journal of Biobased Materials and Bioenergy, 14. pp. 234-248. ISSN 1556-6560

Ishak, Anuar and Waini, Iskandar and Pop, Ioan (2020) Hybrid Nanofluid Flow Past A Permeable Moving Thin Needle. Mathematics, 8 (4). pp. 1-18. ISSN 2227-7390

Ishak, Anuar and Waini, Iskandar and Pop, Ioan (2020) Hybrid Nanofluid Flow Towards A Stagnation Point On A Stretching/Shrinking Cylinder. Scientific Reports, 10 (1). 1- 12. ISSN 2045-2322

Ishak, Anuar and Waini, Iskandar and Pop, Ioan (2020) MHD Flow And Heat Transfer Of A Hybrid Nanofluid Past A Permeable Stretching/Shrinking Wedge. Applied Mathematics and Mechanics (English Edition), 41 (3). pp. 507-520. ISSN 0253-4827

Ishak, Anuar and Waini, Iskandar and Pop, Ioan (2020) Mixed Convection Flow Over An Exponentially Stretching/Shrinking Vertical Surface In A Hybrid Nanofluid. Alexandria Engineering Journal, 59 (3). pp. 1881-1891. ISSN 1110-0168

Ishak, Anuar and Waini, Iskandar and Pop, loan (2020) Flow And Heat Transfer Of A Hybrid Nanofluid Past A Permeable Moving Surface. Chinese Journal of Physics, 66. pp. 606-619. ISSN 0577-9073

J

Jumaidin, Ridhwan and Khiruddin, Muhammad Afif Akmal and Asyul Sutan Saidi, Zulhelmi and Salit, Mohd Sapuan and Ilyas, Rushdan Ahmad (2020) Effect Of Cogon Grass Fibre On The Thermal, Mechanical And Biodegradation Properties Of Thermoplastic Cassava Starch Biocomposite. International Journal of Biological Macromolecules, 146. pp. 746-755. ISSN 0141-8130

K

Kashi'ie, Najiyah Safwa and Md Arifin, Norihan and Pop, Ioan Mihai (2020) Unsteady Axisymmetric Flow And Heat Transfer Of A Hybrid Nanofluid Over A Permeable Stretching/Shrinking Disc. International Journal of Numerical Methods for Heat and Fluid Flow, 31 (6). pp. 2005-2021. ISSN 0961-5539

Khashi’ie, Najiyah Safwa and Md Arifin, Norihan and Pop, Ioan and Nazar, Roslinda and Hafidzuddin, Ezad Hafidz and Wahi, Nadihah (2020) Non-Axisymmetric Homann Stagnation Point Flow And Heat Transfer Past A Stretching/Shrinking Sheet Using Hybrid Nanofluid. International Journal of Numerical Methods for Heat and Fluid Flow, 30 (10). pp. 4583-4606. ISSN 0961-5539

L

Lau, Kok Tee and Munawar, Rose Farahiyan and Arif@Harip, Afraha Baiti and Ong, C. G. (2020) Effect Of Contact Pad’s Roughness And Ni–P Plating Thickness On Leadless Packages’ Shear Strength Variation. Transactions on Electrical and Electronic Materials, 21. pp. 1-9. ISSN 1229-7607

M

Maidin, Nurul Ain and Ab Rahman, Mohd Hidayat and Ahmad, Mohd Nazri and Wahid, Mohammad Khalid and Osman, Mohd Hairizal and Jumaidin, Ridhwan and Mazlan, Siti Nur Humaira and Mohd Basri, Mohd Salahuddin (2020) Design For Manufacturability (DFM) Of 3D Printed Parts Fabricated Using Open Source 3D Printer. International Journal Of Integrated Engineering, 12 (5). pp. 203-209. ISSN 2229-838X

Md Arifin, Norihan and Kashi'ie, Najiyah Safwa and Pop, Ioan and Nazar, Roslinda and Hafidzuddin, Ezad Hafidz and Wahi, Nadihah (2020) Thermal Marangoni Flow Past A Permeable Stretching/Shrinking Sheet In A Hybrid Cu-Al2O3/Water Nanofluid. Sains Malaysiana, 49 (1). pp. 211-222. ISSN 0126-6039

Md Arifin, Norihan and Kashi'ie, Najiyah Safwa and Pop, Ioan Mihai and Nazar, Roslinda (2020) Melting Heat Transfer In Hybrid Nanofluid Flow Along A Moving Surface. Journal of Thermal Analysis and Calorimetry. pp. 1-12. ISSN 1388-6150

Md Arifin, Norihan and Khashi’ie, Najiyah Safwa and Rashidi, Mohammad Mehdi and Hafidzuddin, Ezad Hafidz and Wahi, Nadihah (2020) Magnetohydrodynamics (MHD) Stagnation Point Flow Past A Shrinking/Stretching Surface With Double Stratification Effect In A Porous Medium. Journal of Thermal Analysis and Calorimetry, 139. pp. 3635-3648. ISSN 1388-6150

Mohd Saib, Khairul Anwar and Hassan, Muhammad Zahir and Karjanto, Juffrizal and Md. Yusof, Nidzamuddin and Ab Wahab, Norfariza (2020) Design Of Smart Packaging Machine Liquid Soap Using Pugh’s Method. International Journal of Emerging Trends in Engineering Research, 8 (9). pp. 6203-6208. ISSN 2347-3983

N

Nik Long, Nik Mohd Asri and Senu, Norazak and Hamzah, Khairum and Eshkuvatov, Zainiddin K. (2020) Stress Intensity Factor For Bonded Dissimilar Materials Weakened By Multiple Cracks. Applied Mathematical Modelling, 77. pp. 585-601. ISSN 0307-904X

Nik Long, Nik Mohd Asri and Senu, Norazak and Hamzah, Khairum and Eshkuvatov, Zainidin (2020) Stress Intensity Factors For Crack Problems In Bonded Dissimilar Materials. Journal of Engineering and Technological Sciences, 52 (5). pp. 665-676. ISSN 2337-5779

P

Parman, Setyamartana and Machmudah, Affiani (2020) Waveform Based Inverse Kinematics Algorithm Of Kinematically Redundant 3-Dof Manipulator. International Journal of Innovative Technology and Interdisciplinary Sciences, 3 (2). pp. 407-428. ISSN 2613-7305

Pop, Ioan and Khashi’ie, Najiyah Safwa and Md Arifin, Norihan (2020) Non-Darcy Mixed Convection Of Hybrid Nanofluid With Thermal Dispersion Along A Vertical Plate Embedded In A Porous Medium. International Communications in Heat and Mass Transfer, 118. pp. 1-7. ISSN 0735-1933

Pop, Ioan and Khashi’ie, Najiyah Safwa and Md Arifin, Norihan and Wahi, Nadihah and Nazar, Roslinda and Hafidzuddin, Ezad Hafidz (2020) Three-Dimensional Hybrid Nanofluid Flow And Heat Transfer Past A Permeable Stretching/Shrinking Sheet With Velocity Slip And Convective Condition. Chinese Journal of Physics, 66. pp. 157-171. ISSN 0577-9073

Pop, Ioan and Khashi’ie, Najiyah Safwa and Md Arifin, Norihan and Wahid, Nur Syahirah (2020) Flow And Heat Transfer Of Hybrid Nanofluid Over A Permeable Shrinking Cylinder With Joule Heating: A Comparative Analysis. Alexandria Engineering Journal, 59 (3). pp. 1787-1798. ISSN 1110-0168

Pop, Ioan and Waini, Iskandar and Ishak, Anuar (2020) Transpiration Effects On Hybrid Nanofluid Flow And Heat Transfer Over A Stretching/Shrinking Sheet With Uniform Shear Flow. Alexandria Engineering Journal, 59 (1). pp. 91-99. ISSN 1110-0168

Pop, Ioan and Waini, Iskandar and Ishak, Anuar and Groşan, Teodor (2020) Mixed Convection Of A Hybrid Nanofluid Flow Along A Vertical Surface Embedded In A Porous Medium. International Communications in Heat and Mass Transfer, 114. pp. 1-5. ISSN 0735-1933

Pop, Ioan Mihai and Waini, Iskandar and Ishak, Anuar (2020) Melting Heat Transfer Of A Hybrid Nanofluid Flow Towards A Stagnation Point Region With Second-Order Slip. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 235 (2). pp. 405-415. ISSN 0954-4089

R

Ramli, Mohd Irman and Ngatiman, Nor Azazi and Ab Ghani, Ahmad Fuad and Hamzah, Nur Habibah (2020) A Study On Gasoline Engine Fuel Octane Numbers Using Accelerometer Analyzing And Statistical Measurement. Journal of Engineering and Technology, 11 (2). pp. 1-9. ISSN 2180-3811

S

Salit, Mohd Sapuan and Mustafa, Nuzaimah and Razali, Nadlene and Mohammad Jawaid (2020) Effect Of Surface Treatment On The Performance Of Polyester Composite Filled With Waste Glove Rubber Crumbs. Waste and Biomass Valorization, 12. pp. 1061-1074. ISSN 1877-2641

Salit, Mohd. Sapuan and H. N., Salwa and Mohammad Taha, Mastura and Zuhri, Mohd Yusoff Moh (2020) Life Cycle Assessment of Sugar Palm Fiber Reinforced-Sago Biopolymer Composite Takeout Food Container. Applied Sciences, 10 (22). pp. 1-21. ISSN 2076-3417

Sapuan, S. M. and Hamdan, N. Salwa and Mohammad Taha, Mastura and Zuhri, Mohd Yusoff Moh (2020) Application Of Shannon’s Entropy-Analytic Hierarchy Process (AHP) For The Selection Of The Most Suitable Starch As Matrix In Green Biocomposites For Takeout Food Packaging Design. Bioresources, 15 (2). pp. 4065-4088. ISSN 1930-2126

Sapuan, S.M. and Mustafa, Nuzaimah and Jawaid, Mohammad and Razali, Nadlene (2020) Sodium Hydroxide Treatment Of Waste Rubber Crumb And Its Effects On Properties Of Unsaturated Polyester Composites. Applied Sciences (Switzerland), 10 (11). pp. 2-17. ISSN 2076-3417

Shikh Anuar, Fadhilah and Hooman, Kamel and Malayeri, Mohammad Reza and Ashtiani Abdi, Iman (2020) Experimental Study Of Particulate Fouling In Partially Filled Channel With Open-Cell Metal Foam. Experimental Thermal and Fluid Science, 110. pp. 1-11. ISSN 0894-1777

Sundi, Syahrul Azwan and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir (2020) Effect Of Machining Parameters On Surface Roughness In Edge Trimming Of Carbon Fiber Reinforced Plastics (CFRP). Tribology Online, 15 (2). pp. 53-59. ISSN 1881-2198

Sundi, Syahrul Azwan and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Jaafar, Mohd Fairuz and S. Ding, S. Ding (2020) Statistical Analysis On The Effect Of Machining Conditions Towards Surface Finish During Edge Trimming Of Carbon Fiber Reinforced Plastics (CFRP). International Journal of Nanoelectronics and Materials, 13 (SI). pp. 199-209. ISSN 2232-1535

T

Tukimin, Rahayu and Mohamad Sapiee, Mohd Razali and Wan Mahmood, Wan Hasrulnizzam and Mohd Nordin, Maimunah (2020) Exploring The Impact Of Supplier Development Practices On Manufacturing Responsiveness In Malaysia. International Journal of Integrated Engineering, 12 (5). pp. 171-177. ISSN 2229-838X

W

Waini, Iskandar and Ishak, Anuar and Pop, Ioan Mihai (2020) Hybrid Nanofluid Flow And Heat Transfer Over A Permeable Biaxial Stretching/Shrinking Sheet. International Journal of Numerical Methods for Heat and Fluid Flow, 30 (7). pp. 3497-3513. ISSN 0961-5539

Waini, Iskandar and Ishak, Anuar and Pop, Ioan Mihai (2020) Hybrid Nanofluid Flow On A Shrinking Cylinder With Prescribed Surface Heat Flux. International Journal of Numerical Methods for Heat & Fluid Flow, 31 (6). pp. 1987-2004. ISSN 0961-5539

Wan Mahmood, Wan Hasrulnizzam and Azlan, Umar Al-Amani (2020) QFD Approach In Determining The Best Practices For Green Supply Chain Management In Composite Technology Manufacturing Industries. Malaysian Journal on Composite Science and Manufacturing, 1 (1). pp. 45-56. ISSN 2716-6945

Wan Mahmood, Wan Hasrulnizzam and Mohd Amin, Ahmad Nawawi and Hanapiah, Luqmanulhakim (2020) Application Of AHP On SMED For Jig And Fixture Design Selection. International Journal of Human and Technology Interaction, 4 (1). pp. 27-37. ISSN 2590-3551/ 2600-8122

Wan Mahmood, Wan Hasrulnizzam and Mohd Rosdi, Mohd Noor Hanif and Kamat, Seri Rahayu and Tukimin, Rahayu and Ayuni, Numfor Solange (2020) Discovering The Classification Of Manufacturing Complexity From Malaysian Industry Perspective. Journal of Advanced Manufacturing Technology, 14 (2). pp. 65-76. ISSN 1985-3157

Y

Yusof, Yusri and Saif, Yazid and lliyas Ahmed, Maznah and Latif, Kamran and Abdul Kadir, Aini Zuhra (2020) Systematic Review Of Step-NC-Based Inspection. International Journal of Advanced Manufacturing Technology, 108. pp. 3619-3644. ISSN 0268-3768

Z

Zakaria, Nazri Huzaimi and Aman, M.A. and Ngali, Mohd Zamani and Abdul Munir, Fudhail and Selamat, Mohd Zulkefli (2020) Characteristic Of Thermoplastics Corn Starch Composite Reinforced Short Pineapple Leaf Fibre By Using Laminates Method. Journal of Mechanical Engineering and Sciences, 14 (3). pp. 7058-7070. ISSN 2231-8380

This list was generated on Tue Jul 5 01:57:43 2022 +08.