Items where Division is "Faculty Of Industrial And Manufacturing Technology And Engineering" and Year is 2023

A

Abd. Shukur, Muhammad Fadhlullah and Abdul Aziz, Mohd Fareezuan and Shamsuri, Nurrul Asyiqin and Hamsan, Muhamad Hafiz and Mohd Abid, Mohd Asyadi 'Azam and Mohamed Yusof, Yuhanees and Aziz, Shujahadeen B. and Rusdi, Hashlina and Abdul Kadir, Mohd Fakhrul Zamani (2023) An elucidation of symmetric supercapacitor with crustacean-based polymer blend electrolyte. Journal of Applied Polymer Science, 141 (2). pp. 1-12. ISSN 0021-8995

Abdul Hamid, Rahimah and Abdullah, Lokman and Sindam, Dorestey and Akmal, Suriati and Ito, Tatsuma (2023) Impact of humidity on chemical bonding, porosity and microstructure of 3D printed PLA. Journal of Advanced Manufacturing Technology, 17 (3). pp. 29-40. ISSN 1985-3157

Akbar, Muhammad Rezeki and Aripriharta and Mizar, Alfian and Muladi, Muladi and Ching, Hung-Yu and Amin, Muhammad Adib (2023) Techno-economical analysis of hybrid PV system for school industry. In: 3rd IEEE International Conference in Power Engineering Applications, ICPEA 2023, 6 March 2023through 7 March 2023, Virtual, Online.

Arep @ Ariff, Hambali and Che Manan, Adila Fazliana and Hambali, Ruzy Haryati and Arif, Sazelin and Lim, Guo Dong (2023) Development of conceptual design of female hygienic urinal bedridden using total design approach. In: 1st International Conference on Mechanical Engineering and Emerging Technologies, ICOMEET 2021, 3 November 2021, Padang, Virtual.

Arep @ Ariff, Hambali and Zulkefli, Zarul Amri and Mohd Ishak, Noordiana and Karim, M and Gunawarman (2023) Development of conceptual spin grind dryer design using integrated approach. In: 1st International Conference on Mechanical Engineering and Emerging Technologies, ICOMEET 2021, 3 November 2021, Padang, Virtual.

D

David, Thevaneyan Krishta and Krishnamoorthy, Renga Rao and Sivarao, Subramonian and Ramesh, S. (2023) Compressive and flexural strength of coal bottom ash lightweight concrete. In: 8th Brunei International Conference on Engineering and Technology 2021, BICET 2021, 8 November 2021 through 10 November 2021, Bandar Seri Begawan.

David, Thevaneyan Krishta and Subramonian, Sivarao and Ramesh, S. (2023) Engineering research the perspective towards a sound conduct. In: 8th Brunei International Conference on Engineering and Technology 2021, BICET 2021, 8 November 2021 through 10 November 2021, Bandar Seri Begawan.

F

Farhana, Kaniz and Kadirgama, Kumaran and Mohamed, Danial and Faisal Mahamude, Abu Shadate and Subramonian, Sivarao and Ramasamy, Devarajan and Samykano, Mahendran (2023) An experimental evaluation of specific heat of mono and hybrid nanofluids. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 through 27 October 2021, Virtual, Online.

Farhana, Kaniz and Kadirgama, Kumaran and Subramonian, Sivarao and Ramasamy, Devarajan and Samykano, Mahendran and Mahmude, Abu Shadate Faisal (2023) Applications of graphene nanomaterials in energy storage—a state-of-art short review. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 through 27 October 2021, Virtual, Online.

G

Ghazali, Ihwan and Padzil, Nur Wardah Sufina and Mohamad, Effendi and Al-Mashjari, Layla Ahmed and Irianto, Irianto and Herawan, Safarudin Gazali (2023) The water tap design for ablution activities considering cultural influences: A design for sustainability. Frontiers in Environmental Science, 11. pp. 1-14. ISSN 2296-665X

H

Hafizh, Hadyan and Abdullah, Rohana and Ateeq, Muhammad and Abdul Majeed, Anwar P.P. and Isaac, Matilda and Hu, Bintao (2023) Measurement and analysis of international roughness index using IoT-based system. In: 2023 IEEE Symposium on Wireless Technology and Applications, ISWTA 2023, 15 August 2023through 16 August 2023, Hybrid, Kuala Lumpur.

Halim, Isa and Mahadzir, Muhammad Nadzirul Izzat and Abdullah, Zulkeflee and Zainal Abidin, Muhammad Zaimi and Muhammad, Mohd Nazrin and Saptari, Adi (2023) A review on ergonomics factors determining working in harmony with exoskeletons. Malaysian Journal of Medicine and Health Sciences, 19 (6). pp. 311-327. ISSN 1675-8544

Hamzah, Khairum and Waini, Iskandar and Mohd Nordin, Muhammad Haziq Iqmal and Nik Long, Nik Mohd Asri and Khashi’ie, Najiyah Safwa and Zainal, Nurul Amira and Sayed Nordin, Sayed Kushairi (2023) Numerical solution for a curvilinear crack phenomenon in thermoelectric bonded materials subjected to mechanical loadings. Journal of Advanced Research in Applied Mechanics, 113 (1). pp. 27-36. ISSN 2289-7895

Hung, Yu Ching and Lee, Yann Long and Kiat, An Ting and Wong, Ann Yee and Chia, Mei See and Cai, Jhong Yan (2023) Next-generation shopping cart design based on design methods for consumer behaviour analysis. In: International Symposium on Automation, Mechanical and Design Engineering, SAMDE 2021, 3 December 2021 through 5 December 2021, Beijing.

I

Ishak, Anuar and Mohamad, Effendi and Arep @ Ariff, Hambali and Ito, T. (2023) An explanation of lean six sigma barriers Malaysia wastewater treatment chapter. In: 5th International Conference on Green Energy and Environment 2023 , ICoGEE 2023, 26 September 2023 through 27 September 2023, Pangkalpinang.

K

Kamaludin, Khairun Najmi and Abdullah, Lokman and Syed Salim, Syed Najib Syed and Jamaludin, Zamberi and Chiew, T. H. and Kamarudin, Muhammad Nizam and Mohd Aras, Mohd Shahrieel and Rahmat, M.F. (2023) Performance evaluation of an adaptive sigmoid friction compensation for pneumatic trajectory. In: 8th International Conference on Control and Robotics Engineering, ICCRE 2023, 21 April 2023 through 23 April 2023, Niigata.

Kamat, Seri Rahayu and Ibrahim, Muhammad Shafiq and Shamsuddin, Syamimi and Md Isa, Mohd Hafzi and Fukumi, Minoru (2023) Regression analysis of oxygen saturation level for critical driving fatigue factors using Box-Behnken design. Journal of Advanced Manufacturing Technology, 17 (3). pp. 69-81. ISSN 1985-3157

L

Liew, Pay Jun and Othman, Intan Sharhida and Tee, Chee Yin and Chang, Siang Yee and Raja Abdullah, Raja Izamshah and Wang, Jingsi (2023) Electrical discharge coating of mild steel with fly ash suspension. Journal of Advanced Research in Applied Mechanics, 112 (1). pp. 1-9. ISSN 2289-7895

M

Mahadzir, Muhammad Nadzirul Izzat and Halim, Isa and Zainal Abidin, Muhammad Zaimi and Abdullah, Zulkeflee and Radin Umar, Zaid @ Radin Zaid and Abdul Rahman, Muhammad Husna and Kasim, M.S. (2023) Design and fabrication of test rig for static pushing and pulling experiments. In: 8th International Conference on Applications and Design in Mechanical Engineering, ICADME 2023, 4 September 2023 through 5 September 2023, Kuala Lumpur.

Maidin, Shajahan and Harhara, Sohaib Mohammed Nasser (2023) Analytic hierarchy process to determine process parameters for optimal surface finish and dimensional accuracy. In: 11th International Conference on Mechanical and Manufacturing Engineering 2021, ICME 2021, 25 August 2021through 26 August 2021, Virtual, Online.

Mohamad, Effendi and Jaafar, Roshidah and Faishal, Muhammad and Adiyanto, Okka (2023) Life cycle assessment of eco-brick production using pet particle reinforced epoxy resin composites. Multidisciplinary Science Journal, 5 (3). pp. 1-10. ISSN 2675-1240

Mohamad, Noraiham and Ab Maulod, Hairul Effendy and Abd Razak, Jeefferie and Ghani, Mohd Sharin and Rahim, Nor Hidayah and Mohd Isa, Mohd Hanafiah and Che Halin, Dewi Suriyani and Shueb, Mohammed Iqbal and Ismail, Norshafarina (2023) Tensile and dielectric properties of tin dioxide reinforced deproteinized natural rubber nanocomposites for electrical insulator. In: Green Materials and Electronic Packaging Interconnect Technology Symposium, EPITS 2022, 14 September 2022 through 15 September 2022, Langkawi.

Mohamad, Noraiham and Abd Ghani, Anis Aqilah and Anen, Marvrick Anak and Abd Razak, Jeefferie and Raja Abdullah, Raja Izamshah and Mohd Ali, Mohd Amran and Ab Maulod, Hairul Effendy and Se, Sian Meng (2023) Optimization of recycled polypropylene concrete aggregates processing using water-assisted melt compounding via response surface methodology. In: Green Materials and Electronic Packaging Interconnect Technology Symposium, EPITS 2022, 14 September 2022 through 15 September 2022, Langkawi.

Mohamad, Noraiham and Mohamad Juoi, Jariah and Abd Razak, Jeefferie (2023) Green fertilizer: binder from chitosan, natural rubber & lignin. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792727

Mohamad Juoi, Jariah and Yusuf, Yusliza and Mohd Rosli, Zulkifli and Mustafa, Nuzaimah and Wan Zulkifli, Wan Amirul Shafiz and Abdul Aziz, Fariha Awatif and Abd. Wahab, Nur Umairah Afifah (2023) Recycling of glazed roof tile waste for fine aggregate in green concrete. In: Green Materials and Electronic Packaging Interconnect Technology Symposium, EPITS 2022, 14 September 2022 through 15 September 2022, Langkawi.

Mohd Rosli, Zulkifli and Layu, Elsee and Wan Zulkifli, Wan Amirul Shafiz and Mohamad Juoi, Jariah and Abdul Aziz, Fariha Awatif and Jumaidin, Ridhwan (2023) Investigating the mechanical performance of new green concrete based on unglazed fired roof tile waste. In: Green Materials and Electronic Packaging Interconnect Technology Symposium, EPITS 2022, 14 September 2022 through 15 September 2022, Langkawi.

Muniandy, Moviyndiran and Mustapa, Mohammad Sukri and Ali, Nurdin and Siswanto, Waluyo Adi and Rashid, Azrin Hani Abdul and Masirin, Mohd Idrus Mohd and Wahab, Norfariza Ab and Yaakob, Mohd Yuhazri and Mansor, Mohamad Norani and Wagiman, Abdullah (2023) A review on the tensile properties of bamboo fiber treatments. In: 11th International Conference on Mechanical and Manufacturing Engineering 2021, ICME 2021, 25 August 2021through 26 August 2021, Virtual, Online.

N

Ng, X. H. and Bakar, R.A. and Kadirgama, Kumaran and Subramonian, Sivarao and Ramasamy, Devarajan and Samykano, Mahendran (2023) The performance of beta type stirling engine using different fuel. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 through 27 October 2021, Virtual, Online.

R

Rahman, Muhamad Arfauz A and Lin, Chengsi and Maropoulus, Paul G and Teoh, Woei Sheng and Rahman, Azrul Azwan Abdul and Mohamad, Effendi (2023) Design and validation of an automation strategy for the strip test process in the semiconductor industry. In: 2023 International Conference on Robotics and Automation in Industry, ICRAI 2023, 3 March 2023through 5 March 2023, Peshawar.

Rahman, Muhamad Arfauz A and Shikder, Kaafi N. and Maropoulos, Paul G. and Mohamad, Effendi and Rahman, Azrul Azwan Abdul and Salleh, Mohd Rizal (2023) Configuration tool for generating multi-type and multi-robot work cell layout. In: 2023 International Conference on Robotics and Automation in Industry, ICRAI 2023, 3 March 2023through 5 March 2023, Peshawar.

Ramadhanti,, Darin and Larasati, Aisyah and Muid, Abdul and Mohamad, Effendi (2023) Building customer churn prediction models in Indonesian telecommunication company using decision tree algorithm. In: 7th International Conference on Science and Technology, ICST 2021, 7 September 2021through 8 September 2021, Yogyakarta.

Rosli, Nor Ana and Alkahari, Mohd Rizal and Mohamad Norani, Mohamad Nordin and Abdollah, Mohd Fadzli bin and Paijan, Lailatul Harina and Furumoto, T (2023) Evaluation on the performance of sustainable wire arc additive manufacturing using micro plasma arc welding. In: 5th International Conference on Green Energy and Environment 2023 , ICoGEE 2023, 26 September 2023 through 27 September 2023, Pangkalpinang.

S

Sazli, Muhammad Alif Syafiq and Ab Wahab, Norfariza and Nasir, Nur Syuhada and Vikanesh, Venu and Mustapa, Mohammad Sukri (2023) Influence of micro drilling parameters towards tool wear on carbon fiber reinforced polymers (CFRP) panel. In: 11th International Conference on Mechanical and Manufacturing Engineering 2021, ICME 2021, 25 August 2021 through 26 August 2021, Virtual, Online.

Sivarao, Subramonian and Prasath, K.P. and Ramesh, S. and Kadirgama, Kumaran and Pujari, S. and Vatesh, Umesh Kumar and Salleh, Mohd Shukor and Ali, Mohd Amran and Maidin, Shajahan (2023) Modelling of surface roughness for glass-assisted co2 laser machined p-type silicon wafer. In: 8th Brunei International Conference on Engineering and Technology 2021, BICET 2021, 8 November 2021 through 10 November 2021, Bandar Seri Begawan.

Subramonian, Sivarao and Prasath, K.P. and Ramesh, S. and Kadirgama, Kumaran and Salleh, Mohd Shukor and Ali, Mohd Amran and Maidin, Shajahan and David, Thevaneyan Krishta (2023) Rooted guardrail post design - an improvement towards reducing run-off-road catastrophic accidents. In: 8th Brunei International Conference on Engineering and Technology 2021, BICET 2021, 8 November 2021 through 10 November 2021, Bandar Seri Begawan, Brunei Darussalam.

Sundi, Syahrul Azwan and Izamshah, Raja and Kasim, Mohd Shahir and Othman, Intan Sharhida and Raffay, Mohamad Razly (2023) Surface roughness analysis of five-axis flank milling strategies for slanted thin-walled pocketing: aerospace part. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 through 27 October 2021, Virtual, Online.

Syamimi, Shamsuddin and Azmin, Ahmad Faris and Mat Ali, Mahasan and Kamat, Seri Rahayu and Maharof, Madihah and Yussof, Hanafiah (2023) Evaluating kansei emotion responses in human-robot interaction with low-cost robots in educational setting. Journal of Advanced Manufacturing Technology (JAMT), 17 (3). pp. 113-127. ISSN 1985-3157

T

Ting, Kung Hieng and Maidin, Shajahan and Ariff, Hambali (2023) Ultrasonic assisted 3D printing of recycled Acrylonitrile Butadiene Styrene (ABS). Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792956

Tyassilva, Arfienda Miawa and Aripriharta, Aripriharta and Ihsan, Rifqi Al and Alfadel Saputra, Rui and Omar, Saodah and Ching, Hung-Yu (2023) Aquaponic analysis using the PV system. In: 3rd IEEE International Conference in Power Engineering Applications, ICPEA 2023, 6 March 2023through 7 March 2023, Virtual, Online.

W

Waini, Iskandar and Alabdulhady, Sumayyah and Ishak, Anuar and Pop, Ioan (2023) Viscous dissipation effects on hybrid nanofluid flow over a non-linearly shrinking sheet with power-law velocity. Heliyon, 9 (10). pp. 1-12. ISSN 2405-8440

Y

Yamaguchi, Masayuki and Seemork, Jiraporn and Phulkerd, Panitha and Ali, Mohd Amran Bin Md (2023) Modification of rheological responses under elongational flow at non-isothermal condition. In: 9th International Conference on Novel Trends in Rheology, 26 July 2023through 27 July 2023, Zlin.