Items where Division is "Faculty Of Mechanical Technology And Engineering" and Year is 2023

Article

Abal Abas, Zuraida and Baharuddin, Azhari Samsu and Mukhtar, Mohd Fariduddin and Norizan, Mohd Natashah and Wan Fakhruddin, Wan Farah Wani and Minato, Wakisaka and Abdul Rasib, Amir Hamzah and Zainal Abidin, Zaheera and Abdul Rahman, Ahmad Fadzli Nizam and Hairol Anuar, Siti Haryanti (2023) Integrating local and global information to identify infuential nodes in complex networks. Scientific Reports, 13 (1). pp. 1-12. ISSN 2045-2322

Azmi, Nur Fatihah and Ismail, Muhammad Hazim and Mokhtar, Nur Hazwani and Ramli, Mizah and Saleman, Abdul Rafeq (2023) Flow simulation study on bed bath for bedridden patient. CFD Letters, 16 (3). pp. 112-124. ISSN 2180-1363

Khashi’ie, Najiyah Safwa and Hamzah, Khairum and Waini, Iskandar and Zainal, Nurul Amira and Sayed Kushairi, Sayed Nordin and Mohd Kasim, Abdul Rahman and Pop, Ioan (2023) Response surface methodology of the unsteady axisymmetric magnetic hybrid nanofluid flow subject to a shrinking disk. Journal of Advanced Research in Applied Mechanics, 112 (1). pp. 137-148. ISSN 2289-7895

Mat Dan, Reduan and Putra, Azma and Yahya, M. Farid and Samsubaha, Muhammad Fadzlee and Rashid, Zaini (2023) Study of axial vibration of a motor-compressor system using operational modal analysis. Sound and Vibration, 57 (1). pp. 119-131. ISSN 1541-0161

Mohd Rosli, Mohd Afzanizam and Salimen, Nurfarhana and Akmal Muhamed Rafaizul, Nurul Izzati and Misha, Suhaimi and Abdullah, Norli and Herawan, Safarudin Gazali and Permanasari, Avita Ayu and Hussain, Faridah (2023) Parametric study of photovoltaic system integrated with organic phase change material using ANSYS. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 106 (1). pp. 76-89. ISSN 2289-7879

Mukhtar, Mohd Fariduddin and Abal Abas, Zuraida and Abdul Rasib, Amir Hamzah and Asmai, Siti Azirah and Hairol Anuar, Siti Haryanti and Mohd Zaki, Nurul Hafizah and Zainal Abidin, Zaheera and Abdul Rahman, Ahmad Fadzli Nizam (2023) Global structure model modification to improve influential node detection. ARPN Journal Of Engineering And Applied Sciences, 18 (3). pp. 220-225. ISSN 1819-6608

Razali, Nadlene and Kamarolzaman, Anita Akmar and Abdul Hamid, Nurfaizey and Sheikh Md Fadzullah, Siti Hajar and Sharif, Emy Aqillah and Hamdan, Hasanudin and Ahmad Rashidi, Syazwan and Othman, Sarah (2023) Characterization of carbon fibre reinforced polyphenylene sulfide composite under interlaminar shear strength. Journal of Advanced Research in Applied Mechanics, 102 (1). pp. 1-9. ISSN 2289-7895

Zainal, Nurul Amira and Khashi’ie, Najiyah Safwa and Waini, Iskandar and Hamzah, Khairum and Sayed Nordin, Sayed Kushairi and Mohd Kasim, Abdul Rahman and Nazar, Roslinda and Pop, Ioan (2023) Analysis of solution stability in Al2O3-Cu/H2O over a stretching/shrinking wedge. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 111 (2). pp. 116-125. ISSN 2289-7879

Zainal, Nurul Amira and Waini, Iskandar and Khashi’ie, Najiyah Safwa and Hamzah, Khairum and Sayed Nordin, Sayed Kushairi and Mohd Kasim, Abdul Rahman and Nazar, Roslinda and Pop, Ioan (2023) Stability analysis of unsteady flow and heat transfer of rear stagnation point in hybrid nanofluids with thermal radiation and magnetic impact. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 112 (1). pp. 84-93. ISSN 2811-3950

Zainal, Nurul Amira and Waini, Iskandar and Khashi’ie, Najiyah Safwa and Nazar, Roslinda and Pop, Ioan (2023) Thermal radiation effect on unsteady MHD rear stagnation point in Al2O3-Cu/H2O hybrid nanofluids. Journal of Quality Measurement and Analysis, 20 (1). pp. 1-13. ISSN 2600-8602

Zakaria, Kamarul Ariffin and Tar, Vishaldeep and Yusuff, Mohd Asri and Roseli, Adnan and Ali, Mohd Basri and Tajul Arifin, Ahmad Mubarak (2023) Effect of weight percentage on physical and mechanical properties of coconut shell reinforced polymer composite. ARPN Journal of Engineering and Applied Sciences, 18 (17). pp. 2051-2057. ISSN 1819-6608

Conference or Workshop Item

Abdullah, Haslina and Isa, Nurshafinaz and Zakaria, Mohamad Shukri (2023) Optimization machining parameters in pocket milling using genetic algorithm and mastercam. In: 12th International Conference on Mechanical and Manufacturing Engineering 2022 , ICME 2022, 9 August 2022 through 10 August 2022, Virtual, Online.

Arianti, Nunik Destria and Muda, Azah Kamilah and Ahmad, Norashikin (2023) Red blood cells classification with sharpening segmentation and mask R-CNN. In: 14th International Conference on Soft Computing and Pattern Recognition, SoCPaR 2022, and the 14th World Congress on Nature and Biologically Inspired Computing, NaBIC 2022, 14 December 2022through 16 December 2022, Virtual, Online.

Ariffin, Eddy Azrai and Munir, Fudhail Abdul and Rahman, Abdul Razak Abdul and Yob, Mohd Shukri (2023) Investigation on the effect of direct welding heat for on-stream repair of stainless steel piping. In: Article number 0300082nd International Conference on Design, Energy, Materials and Manufacture 2021, ICDEMM 2021, 4 August 2021, Pekanbaru.

Arina Manasikhana, Dita and Permanasari, Avita Ayu and Puspitasari, Poppy and Mohd Rosli, Mohd Afzanizam and Sukarni, Sukarni and Kusumaningsih, Haslinda and Dzulfikar, Muhammad (2023) Effect of TiO2/Al2O3 hybrid nanofluid and irradiation time on solar photovoltaic thermal performance. In: 4th International Conference on Green Civil and Environmental Engineering, GCEE 2023, 8 August 2023through 10 August 2023, Bali.

Awang Ahmad, Mohd Zainuddin and Yob, Mohd Shukri and Mat Tahir, Noor Ayuma and Abd Latif, M.J. (2023) Experienced of thermal fatigue failure on closed blowdown system line in delay coker unit. In: 7th International Conference on Mechanical, Manufacturing and Plant Engineering, ICMMPE 2021, 29 November 2021 through 29 November 2021, Virtual, Online.

Azemi, Saidatul Norlyana and Iffah Azhar, Nur Hafizah and Amir, Amiza and Che Beson, Rashidi and Kamalrudin, Massila (2023) Localization of person under surveillance using GPS mobile apps. In: 2nd International Symposium on Engineering and Technology, ISETech 2021, 5 October 2021, Virtual, Online.

Baharom, Mohamad Zairi and Ahmad, Zulkifli and Ismail, Nursya Mimie Ayuny and Hassan, Mohd Hasnun Arif and Karjanto, Juffrizal and Abu Kassim, Khairil Anwar (2023) Factors contributing to the pedal error or pedal misplacement among Malaysian car drivers a survey. In: 6th International Conference on Mechanical Engineering Research, ICMER 2021, 26 October 2021 through 27 October 2021, Virtual, Online.

Baharom, Mohamad Zairi and Manap, Zulkifli Ahmad and Ismail, Nursya Mimie Ayuny and Hassan, Mohd Hasnun Arif and Karjanto, Juffrizal and Kassim, Khairil Anwar Abu (2023) Pedal error naturalistic driving study among Malaysian drivers. In: 2nd Energy Security and Chemical Engineering Congress, ESChE 2021, 3 November 2021 through 5 November 2021, Virtual, Online.

Fawazi, Noor and Man, M. H.C. and Parnon, Mohamad Afiq Amiruddin (2023) Damage detection in a free-free beam structure using reconstructed mode shape data: Experimental approach. In: 2021 International Conference of SNIKOM, ICoSNIKOM 2021, 18 September 2021, Medan.

Fawazi, Noor and Mqan, M.H.C. and Parnon, Mohamad Afiq Amiruddin (2023) Damage detection in a free-free beam structure using reconstructed mode shape data: Numerical approach. In: 2021 International Conference of SNIKOM, ICoSNIKOM 2021, 18 September 2021, Medan.

Hadiana, Asep Id and Kamal Baharin, Safiza Suhana and Othman, Zahriah and Putra, Eddie Krishna (2023) Improving first responder preparedness in indoor evacuation through advanced numerical simulation techniques. In: 2nd International Conference on Computational Modelling, Simulation and Optimization, ICCMSO 2023, 23 June 2023 through 25 June 2023, Hybrid, Bali.

Ismail and Aini, Quratul and Maulida, Cut Rizka and Mursal and Jalil, Zulkarnain and Md Fadzullah, Siti Hajar Sheikh (2023) Thermal properties of spent coffee ground biocomposite using epoxy resin matrix. In: 11th Annual International Conference: On Sciences and Engineering, AIC 2021, 29 September 2021through 30 September 2021, Banda Aceh.

Ismail, Iszmir Nazmi and Azman, Nur Najwa Umirah Binti Nor and Roslin, Nursyadzatul Tasnim and Isa, M.R. and Zahari, N.M. and Abidin, S.Z. and Zuhdi, Ahmad Wafi Mahmood and Eqwan, M.R. and Mohamed, Hassan and Ramli, M.Z. and Mansor, M.H. and Syaifoelida, Fevi and Zakaria, A.A. and Zawawi, M.H. and Mohamad, Daud and Jaafar, M.F. and Kamarudin, Kamarulzaman and Hussin, Mohamed Saiful Firdaus (2023) Customer survey analysis for design and development of golf ball retriever prototype. In: Green Materials and Electronic Packaging Interconnect Technology Symposium, EPITS 2022, 14 September 2022 through 15 September 2022, Langkawi.

Ismail, Mohd. Farid and Wan Hamzah, Wan Azmi (2023) Performance investigation of R32 and R410a refrigerants with different compressor lubricants. In: 2nd Energy Security and Chemical Engineering Congress, ESChE 2021, 3 November 2021 through 5 November 2021, Virtual, Online.

Ismail, Mohd. Farid and Wan Hamzah, Wan Azmi (2023) Tribological performance effect of SiO2 and TiO2 nanoparticles as lubricating oil additives. In: 2nd Energy Security and Chemical Engineering Congress, ESChE 2021, 3 November 2021 through 5 November 2021, Virtual, Online.

Khairunnisa, Nuha and Arifin, Zainal and Kristiawan, Budi and Mohd Rosli, Mohd Afzanizam (2023) The thermophysical properties, configurations and applications of nanofluids on solar PVT system : a review. In: 7th International Conference on Industrial, Mechanical, Electrical and Chemical Engineering 2021, ICIMECE 2021, 5 October 2021, Surakarta, Virtual.

Lim, T.S. and Sukiman, Muhamad Shafiq and Jasmee, Solehah and Masdzarif, Nur Diana Izzani (2023) Mechanical modelling and analysis of CMOS image sensor package. In: 25th Electronics Packaging Technology Conference, EPTC 2023, 5 December 2023through 8 December 2023, Singapore.

Lubis, A.M.H.S. and Ahmadin, A. and Zainuddin, M.N.I. and Tofrowaih, Khairul Amri and Herawan, S.G. R and Rahmah, A.U. (2023) Wear preventive and friction of trans-esterified waste cooking oil enhanced zinc dialkyl dithiophospate (ZDDP). In: 2021 International Summit on Education, Technology and Humanity, ISETH 2021, 20 December 2021 through 21 December 2021, Surakarta.

Mizar, Muhammad Alfian and Nasir, Mohd Zakaria Mohammad and Trifiananto, Muhammad and Hardiatama, Intan (2023) Design and performance test of multi intake foods product cutting machine. In: 2nd International Conference on Bioenergy and Environmentally Sustainable Agriculture Technology, ICoN BEAT 2021, 28 July 2021through 29 July 2021, Virtual.

Mohamed Saiful Firdaus, Hussin and Idris, M.I. and Abdullah, H.Z. and Azlan, Khairul Azri and Mohamad, Effendi (2023) Worldwide trends on hydroxyapatite from animal waste for biomedical applications - a bibliometric analysis (2012-2022). In: 5th International Conference on Green Energy and Environment 2023, ICoGEE 2023, 26 September 2023through 27 September 2023, Pangkalpinang.

Mohd Sa'at, Fatimah Al-Zahrah and Hasbullah, Nurjannah and Shikh Anuar, Fadhilah and Johari, Dahlia (2023) Heat transfer comparison between the one-directional and the bi-directional flows across heated tube banks with staggered configuration. In: 14th International Conference on Thermal Engineering: Theory and Applications, ICTEA 2023, 25 May 2023 through 27 May 2023, Yalova.

Mohd Zaki, Sharif and Azmi, W.H. and Ismail, Mohd. Farid and Awalludin, M.M.N. and Ghazali, M.F. and Amirullah, A.R.M. (2023) Performance analysis of automotive air conditioning systems with electric compressors using R1234yf refrigerant: Insights into power consumption, cooling capacity, and energy efficiency. In: 5th International Conference on Green Energy and Environment 2023 , ICoGEE 2023, 26 September 2023 through 27 September 2023, Pangkalpinang.

Mokhtar, Nur Hazwani and Hamzah, Luqman Hakim and Che Mamat, Husni and Mohammad Nasir, Mohd Zakaria and Mamat, Mohd Fauzi (2023) Decreasing the rate of motorcycle accidents in Malaysia: analytical hierarchy process approach. In: 3rd Symposium on Industrial Science and Technology, SISTEC 2021, 25 August 2021through 26 August 2021, Pahang, Virtual.

Mubarok, Sukri and Puspitasari, Poppy and Andoko, Andoko and Lubis, Abdul Munir Hidayat Syah and Permanasari, Avita Ayu and Abdullah, Muhammad Ilman Hakimi Chua (2023) Failure mechanism on Ti-6Al-4V material processed using Selective Laser Melting (SLM). In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9 August 2022 through 10 August 2022, Kuala Lumpur.

Nor Azli, Mohamad Nor Azhari and Hariri, Azian and Chong, Zi Yao and Khasri, Muhammad Aidil and Muhamad Damanhuri, Amir Abdullah and Syazwan Mustafa, Mohd Syafiq and Kabrein, Hashim (2023) Influence of air velocity on thermal comfort and performance of students in naturally ventilated classrooms in tropical climate. In: 11th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings, IAQVE C2023, 20 May 2023 through 23 May 2023, Tokyo.

Nordin, Mohd Nur Azmi and Mustafa, Zaleha and Ratanawilai, T. (2023) Effect of water ageing on fatigue damage of rubberwood/recycled polypropylene composites. In: 23rd International Conference on Composite Materials, ICCM 2023, 30 July 2023through 4 August 2023, Belfast.

Palagud, Jose and Lim, T.S. and Jasmee, Solehah and Masdzarif, Nur Diana Izzani and Wang, S.W. and Hoo, K.I. and Omar, Ghazali (2023) Analysis on bonding wires of Au-Coated Ag alloy for IBGA automotive application. In: 25th Electronics Packaging Technology Conference, EPTC 2023, 5 December 2023through 8 December 2023, Singapore.

Puspitasari, Poppy and Wardana, Muhammad Raffli Putra and Pramono, Diki Dwi and Lubis, Abdul Munir and Permanasari, Avita Ayu and Abdullah, Muhammad Ilman Hakimi Chua and Risdanareni, Puput (2023) Tribology properties of titanium alloy (Ti-6Al-4V) at various temperature on α/β solution treatment and aging condition. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9 August 2022 through 10 August 2022, Kuala Lumpur.

Saadun, Mohd Noor Asril and Che Sidik, Nor Azwadi and Xian, Teng Meng and Mohd Rosli, Mohd Afzanizam (2023) Numerical studies for small-scale solar chimney power plants with various geometric configurations. In: 6th International Conference on Mechanical Engineering Research, ICMER 2021, 26 October 2021 through 27 October 2021, Virtual, Online.

Sahroni, T.R. and Ahmad, Saifol Anuar and Akmal, Suriati (2023) Thermal expansion flow analysis in designing a sustainability computer personal unit casing. In: 6th International Conference on Eco Engineering Development 2022, ICEED 2022, 16 November 2022 through 17 November 2022, Virtual, Online.

Samranmak, Pongsiri and Salim, Mohd Azli and Photong, Chonlatee (2023) Effects of electric motor speed and direction of a horizontal rotary dyeing machine on indigo dyeing quality and performances. In: 2023 International Conference on Power, Energy and Innovations, ICPEI 2023, 18 October 2023through 20 October 2023, Phrachuap Khirikhan.

Suhaimi, Mohamed Aidil and Mat Tokit, Ernie and Mohd Sa'at, Fatimah Al-Zahrah and Mohd Rosli, Mohd Afzanizam and Herawan, S. G. and Oktarina, R. and Setyandito, O. (2023) Preliminary theoretical design of crossflow water turbine for rainwater rooftop harvesting system. In: 6th International Conference on Clean Energy and Technology 2023, CEAT 2023, 7 June 2023through 8 June 2023, Hybrid, Penang.

Syazwan, M.M.S. and Yusop, F and Saad, M.S. and Sari, K.A. Mohd and Muhamad Damanhuri, Amir Abdullah and Hassan, N.N. Mat and Fahmi, A.R. (2023) Identification of competency supervisor and technician heating ventilating and air conditioning (HVAC) maintenance in oil and gas industry Malaysia. In: 1st International Conference on Manufacturing Engineering Technology, IConMET 2021, Virtual, Online.

Tee, Boon Tuan and Lim, S.C.J. and Siew, P.W. and Lee, M.F. (2023) Application of sensor technology for energy consumption analysis; a case study in a smart office building. In: 2023 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2023, 18 December 2023 through 21 December 2023, Singapore.

Yob, Mohd Shukri and Hussin, A and Tahir, Noor Ayuma and Kurdi, O and Izahar, M.M. (2023) Design of permanent rectification for flare stack structure by using finite element method. In: 7th International Conference on Mechanical, Manufacturing and Plant Engineering, ICMMPE 2021, 29 November 2021 through 29 November 2021, Virtual, Online.

Yulio, Noviando and Herawan, Safarudin Gazali and Oktarina, Rienna and Setyandito, Oki and Mat Tokit, Ernie and Mohd Sa'at, Fatimah Al-Zahrah and Mohd Rosli, Mohamad Afzanizam (2023) The effect of number of blades on the horizontal axis water turbine performance. In: 6th International Conference on Clean Energy and Technology 2023, CEAT 2023, 7 June 2023through 8 June 2023, Hybrid, Penang.

Zulkarnain, Mohamad and Lubis, Sobron (2023) Numerical study on mechanical behavior of honeycomb sandwich with random fiber reinforcement. In: 4th Tarumanagara International Conference of the Applications of Technology and Engineering, TICATE 2023, 5 August 2023 through 6 August 2023, Virtual, Online.