Items where Division is "Faculty of Mechanical Engineering" and Year is 2016

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 34.

Article

Abdullah, Amirah and Mohamad, Imran Syakir and Bani Hashim, Ahmad Yusairi and Abdullah, Norli and Poh, Ban Wei and Md Isa, Mohamed Hafiz and Zainal Abidin, Syazwani (2016) Thermal conductivity and viscosity of deionised water and ethylene glycol-based nanofluids. Journal of Mechanical Engineering and Sciences (JMES), 10. pp. 2249-2261. ISSN 2289-4659

Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Selamat, Mohd Zulkefli and Said, Md Radzai and Subramonian, Sivarao (2016) A study on impact behaviour of a novel oil palm fibre reinforced metal laminate system. ARPN Journal Of Engineering And Applied Sciences, 11 (4). pp. 2483-2488. ISSN 1819-6608

Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Selamat, Mohd Zulkefli and Said, Md Radzai and Subramonian, Sivarao (2016) A study on impact behaviour of a novel oil palm fibre reinforced metal laminate system. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2483-2488. ISSN 1819-6608

K., Rajammal and Sivakumar, Dhar Malingam and Navaneethan, Duraisamy and K., Ramesh and S., Ramesh (2016) Effect Of Sintering Temperature On Structural Properties Of LiMnPO4 Cathode Materials Obtained By Sol–Gel Method. Journal Of Sol-Gel Science And Technology, 79. pp. 1-9. ISSN 0928-0707

Kasim, Ayu Natasya and Selamat, Mohd Zulkefli and Mohd Daud, Mohd Ahadlin and Yaakob, Mohd Yuhazri and Putra, Azma and Dhar Malingam, Sivakumar (2016) Mechanical properties of polypropylene composites reinforced with alkaline treated pineapple leaf fibre from Josapine cultivar. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3157-3167. ISSN 2229-8649

Low, Pei Sing and Ramlan, Roszaidi and Muhammad, N.S and Ghani, H. A. (2016) Comparison Of Harmonic Balance And Multiple Scale Method On Degree Of Nonlinearity For Duffing Oscillator. ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, 11 (8). pp. 5314-5319. ISSN 1819-6608

Mahanum, Mohd Zamberi and Farid Nasir, Ani and Mohd Fadzli, Abdollah (2016) Heterogeneous Transesterification Of Rubber Seed Oil Biodiesel Production. Jurnal Teknologi, 78 (6-10). pp. 105-110. ISSN 0127-9696

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2016) The Effect Of Sliding Distance At Different Temperatures On The Tribological Properties Of A Palm Kernel Activated Carbon-Epoxy Composite. Tribology International, 94 (-). pp. 352-359. ISSN 0301-679X

Mohd Amman, Rosmia and Halim, Mohd Faizal and Dhar Malingam, Sivakumar and Abu Shah, Ismail (2016) Influences of thickness and geometrical change from draw forming in quasi-static axial compression simulation. International Review on Modelling & Simulations, 9 (6). pp. 442-449. ISSN 1974-9821

Mohd Azli, Salim and Azma, Putra and Muhd Ridzuan, Mansor and Musthafah, Mohd Tahir and Mohd Zaid, Akop and Mohd Azman, Abdullah (2016) Analysis Of Parameters Assessment On Laminated Rubber-Metal Spring For Structural Vibration. IOP Conference Series: Materials Science And Engineering, 114 (1). pp. 1-12. ISSN 1757-8981

Mohd Nizam, Sudin and Shamsul Anuar, Shamsudin and Mohd Azman, Abdullah (2016) Effect Of Part Features On Dimensional Accuracy Of FDM Model. ARPN Journal Of Engineering And Applied Sciences, 11 (13). pp. 8067-8072. ISSN 1819-6608

Mohd Sa'at, Fatimah Al-Zahrah and Cho, Wei Yang (2016) Oscillatory Flow Across Plates With Different Shape Of Edges. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 8. pp. 77-91. ISSN 2180-1053

Mohd Zalani, Naziatul Fazilah and Dhar Malingam, Sivakumar and Selamat, Mohd Zulkefli (2016) Tensile properties of woven kenaf fiber reinforced polypropylene hybrid aluminium-composite. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7823-7827. ISSN 1819-6608

Muhammad Said, Nurlaela and Ali, Mohd Basri and Zakaria, Kamarul Ariffin and Mohd Daud, Mohd Ahadlin (2016) Comparison Of Impact Duration Between Experiment And Theory From Charpy Impact Test. MATEC Web Of Conferences, 78 (-). pp. 1-8. ISSN 2261-236X

Naziatul Fazilah, Mohd Zalani and Sivakumar, Dhar Malingam and Mohd Zulkefli, Selamat (2016) Tensile Properties Of Woven Kenaf Fiber Reinforced Polypropylene Hybrid Aluminium-Composite. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7823-7827. ISSN 1819-6608

Safarudin Gazali, Herawan and Abdul Hakim, Rohhaizan and Ahmad Faris, Ismail and Shamsul Anuar, Shamsudin and Azma, Putra and Musthafah, Mohd Tahir and Ardika Ridal, Awang (2016) Prediction On Power Produced From Power Turbine As A Waste Heat Recovery Mechanism On Naturally Aspirated Spark Ignition Engine Using Artificial Neural Network. Modelling And Simulation In Engineering, 2016. pp. 1-12. ISSN 1687-5591

Selamat, Mohd Zulkefli and Ahadlin, Mohd Daud and YAAKOB, MOHD YUHAZRI and Azma, Putra and Sivakumar, Dhar Malingam (2016) Mechanical properties of polypropylene composites reinforced with alkaline treated pineapple leaf fibre from Josapine cultivar. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3157-3167. ISSN 2180-1606

Selamat, Mohd Zulkefli and Razi, Mashitah and Kasim, Ayu Natasya and Dhar Malingam, Sivakumar and Putra, Azma and Yaakob, Mohd Yuhazri and Mohd Daud, Mohd Ahadlin (2016) Mechanical properties of starch composite reinforced by pineapple leaf fiber (PLF) from josapine cultivar. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 9783-9788. ISSN 1819-6608

Selamat, Mohd Zulkefli and Sivakumar, Dhar Malingam and Azma, Putra and Ahadlin, Mohd Daud and Yuhazri, Yaakob (2016) MECHANICAL PROPERTIES OF STARCH COMPOSITE REINFORCED BY PINEAPPLE LEAF FIBER (PLF) FROM JOSAPINE CULTIVAR. ARPN Journal Of Engineering And Applied Sciences, 11 (16). pp. 9783-9788. ISSN 1819-6608

Shamsul Akmar, Ab Aziz and Mohd Zaki, Nuawi and Mohd Jailani, Mohd Nor (2016) Development Of Noise And Vibration Exposure Monitoring System For Malaysian Army (MA) Three-Tonne Trucks. Jurnal Teknologi, 78 (6-10). pp. 9-15. ISSN 0127-9696

Sivakumar, Dhar Malingam (2016) ECO-HYBRID COMPOSITE FAILURE BEHAVIOR OF TWO SERIAL BOLTED JOINT HOLES. Journal of Engineering and Technology, 7 (1). pp. 114-124. ISSN 2180-3811

Sivakumar, Dhar Malingam and Muhd Ridzuan , Mansor (2016) Selection of natural fibre reinforced composites using fuzzy VIKOR for car front hood. International Journal of Materials And Product Technology, 53 (3/4). pp. 267-285. ISSN 0268-1900

Sivarao, Subramonian and Sivakumar, Dhar Malingam (2016) Performance Evaluation of Reworked Weld Joints. International Journal of Engineering and Technologies, 9. pp. 5-12. ISSN 2297-623X

Tang, Bin and Brennan, Michael John and Vicente, Lopes Jr and Samuel, da Silva and Ramlan, Roszaidi (2016) Using nonlinear jumps to estimate cubic stiffness nonlinearity: An experimental study. Proceedings Of The Institution Of Mechanical Engineers, Part C: Journal Of Mechanical Engineering Science, 230 (19). pp. 3575-3581. ISSN 0022-2542

Zainal Abidin, Syazwani and Mohamad, Imran Syakir and Bani Hashim, Ahmad Yusairi and Abdullah, Norli and Md Isa, Mohamed Hafiz and Masripan, Nor Azmmi and Abdullah, Amirah (2016) Investigation of thermal characteristics of CNF-based nanofluids for electronic cooling applications. Journal of Mechanical Engineering and Sciences (JMES). 2336-2349. ISSN 2289-4659

Zakaria, Kamarul Ariffin and Abdullah, Shahrum and Ghazali, Mariyam Jameelah and Ali, Mohd Basri (2016) Influence Of Elevated Temperature On The Fatigue Fracture Surface Hardness Of AA6061. Journal of Engineering and Applied Sciences, 11 (10). pp. 2130-2135. ISSN 1816-949X

Conference or Workshop Item

Mohd Fadzli, Abdollah and Mohd Azli , Salim and Tee, Boon Tuan (2016) Proceeding Of Mechanical Engineering Research Day 2016 (MERD’16). In: https://books.google.com.my/books?id=YZfACwAAQBAJ, 31 March 2016, Kampus Teknologi, Universiti Teknikal Malaysia Melaka (UTeM).

Phuman Singh, Amrik Singh and Nishihara, Osamu (2016) Nondimensionalized Indices for Collision Avoidance Based on Optimal Control Theory. In: FISITA 2016 World Automotive Congress, September 2016, Busan, Korea.

Phuman Singh, Amrik Singh and Nishihara, Osamu (2016) Obstacle Avoidance by Steering and Braking with Minimum Total Vehicle Force. In: 13th IFAC Symposium on Analysis, Design, and Evaluation of Human-Machine Systems HMS 2016, 30 August - 2 September 2016, Kyoto, Japan.

Selamat, Mohd Zulkefli and Muhammad Yusri , Md Yusuf and Sivakumar, Dhar Malingam (2016) Effect of formation temperature on properties of graphite/stannum composite for bipolar plate. In: none, none, none.

Selamat, Mohd Zulkefli and Sivakumar, Dhar Malingam (2016) Effect of carbon nanotubes loading in multifiller polymer composite as bipolar plate for PEM fuel cell. In: 5th International Conference on Recent Advances in Materials, Minerals and Environment, 4-6 August 2015, Penang, Malaysia.

Sivakumar, Dhar Malingam and Muhd Ridzuan , Mansor (2016) Thermoplastic matrix selection based on entropy method for importance weight of criteria. In: MERD 15, none, UTeM.

Sivakumar, Dhar Malingam and Selamat, Mohd Zulkefli and Ahadlin, Mohd Daud and Tan, CheeFai (2016) Failure analysis of two serial holes bolted joint hybrid composite. In: MERD 2016, none, UTeM.

Sivakumar, Dhar Malingam and Selamat, Mohd Zulkefli and Ahadlin, Mohd Daud and Tan, CheeFai (2016) Failure analysis on hybrid fiber reinforced plastics for bolted joint under geometric parameters effect. In: MERD 15, none, UTeM.

This list was generated on Fri Mar 29 16:19:18 2024 +08.