Items where Division is "Faculty of Manufacturing Engineering" and Year is 2015

H

Ho, Soonmin and Anand, T. Joseph Sahaya (2015) A Review Of Chalcogenide Thin Films For Solar Cell Applications. Indian Journal Of Science And Technology (INDJST), 8 (12). pp. 1-6. ISSN 0974-6846

Hussein, Nur Izan Syahriah and Rasidi, Mohd Kamarul Shaufi and Ayof, Mohd Nizam (2015) Experimental Methods For NICRBSI-WC Cladding On Gray Cast Iron Trim Cutter Die. APPLIED MECHANICS AND MATERIALS, 761. pp. 298-302. ISSN -

J

Jamaludin, Zamberi and Fu @ Hu-Jingwei, Zinvi and Bani Hashim, Ahmad Yusairi and Mohamad, Imran Syakir (2015) EMG recording of wrist gestures under non-ideal electrode placement for machine control in a manufacturing environment. Jurnal Teknologi , 77 (21). pp. 41-49. ISSN 2180-3722

M

Mat Harttar @ Mohd Hatta, Maziati Akmal and Azlan, Umar Al-Amani and Abd Rashid , Mohd Warikh and Azmi, Nurul Azuwa (2015) Enhanced Structural And Electrical Properties Of Lead-Free Y-Doped (K, NA) NBO3 Thin Films. Jurnal Teknologi, 77 (21). pp. 67-71. ISSN 0127-9696

Mohd Abid, Mohd Asyadi Azam and Isomura , Kazuki and Ismail, Syahriza and Mohamad, Noraiham and Shimoda, Tatsuya (2015) Electrically Conductive Aluminum Oxide Thin Film Used As Cobalt Catalyst-Support Layer In Vertically Aligned Carbon Nanotube Growth. Advances In Natural Sciences : Nanoscience And Nanotechnology, 6 (-). pp. 1-6. ISSN -

Mohd Amran, Md Ali and Siti Salmah, Mohd Sani and Zulkeflee, Abdullah and Liew, Pay Jun and Mohd Razali, Muhamad and Raja Izamshah , Raja Abdullah and Mohd Hadzley, Abu Bakar and Abu , Abdullah and Zolkarnain, Marjom (2015) Effect Of Different Coolant Medium On Warpage Deflection Using Moldflow Insight Analysis. Applied Mechanics And Materials, 761. pp. 42-46. ISSN 1662-7482

Mohd Asyadi ‘Azam Mohd Abid (2015) Electrochemical Capacitor And A Method Of Growing Vertically Aligned Carbon Nanotube On Conducting Substrate Of Electrodes. PI 2015703500.

N

Ng, Poh Kiat and Jee, Kian Siong and Saptari, Adi and Ng, Chiew Yean (2015) Influences Of Tactile Sensation On Pinch Force Under Loaded And Unloaded Conditions. American Journal Of Applied Sciences, 12 (8). pp. 588-592. ISSN 1546-9239

R

Raja Abdullah, Raja Izamshah and Yu, Aaron Lung and Mohamad, Effendi and Mohd Abid, Mohd Asyadi 'Azam and Sulaiman, Mohd Amri and Liew, Pay Jun and Abdul Aziz, Mohd Sanusi (2015) Optimization Of Milling Parameter For Untreated And Heat Treated Polyetheretherketones (PEEK) Biomaterials. Applied Mechanics And Materials, 761. pp. 293-297. ISSN 1662-7482

S

Salleh, Mohd Shukor and Mohammed, M.N. and Omar, Mohd Zaidi and Sajuri, Zainuddin and Alhawari, Khaled Salem (2015) Trend And Development Of Semisolid Metal Joining Processing. Advances in Materials Science and Engineering, 2015. pp. 1-13. ISSN 1687-8434

Saptari, Adi and Leau, Jia Xin and Mohamad, Nor Akramin (2015) Optimizing Assembly Line Production through Line Balancing: A Case Study. Applied Mechanics And Materials, 761. pp. 104-108. ISSN 1662-7482

Sivarao Subramonian (2015) Rapid hot marking tool. PI 2015702286.

Sivarao Subramonian (2015) Bio-based hybrid nano compositions for sealing pneumatic inflated mediums. IP 2015703853.

Subramonian, Sivarao and Kasim, Mohd Shahir and Md Ali, Mohd Amran and Raja Abdullah, Raja Izamshah and Anand, T Joseph Sahaya (2015) Micro-Drilling Of Silicon Wafer By Industrial CO2 Laser. International Journal of Mechanical and Materials Engineering , 10 (2). pp. 1-6. ISSN -

T

Talib, Elyas and Lau, Kok Tee and Zainal Abidin, Muhammad Zaimi and Bistamam, Mohd Shahril Amin and Abdul Manaf, Nor Syafira and Raja Seman, Raja Noor Amalina and Zulkapli, Nor Najihah and Mohd Abid, Mohd Asyadi 'Azam (2015) Electrochemical performance of multi walled carbon nanotube and graphene composite films using electrophoretic deposition technique. Applied Mechanics And Materials, 761. pp. 468-472. ISSN 1662-7482

Thangaraj, Joseph Sahaya Anand and Mohd Abid, Mohd Asyadi 'Azam and Subramonian, Sivarao and Buang, Zolkepli and K.M.Rajan, Rajes and Mat Yusoff, Nurul Hazliza and Abdul Aziz, Mohd Zaidan and Chua, Kok Yau (2015) Hrtem Studies Of Magnetron Sputtered Ni4al Thin Films. Applied Mechanics and Materials, 761 (-). pp. 504-509. ISSN -

Y

Yusup, Muhamad Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Muhamad, Mohd Razali and Saptari, Adi (2015) Synthesizing The Domain Of Lean Practices In Manufacturing Operations : A Review. Jurnal Teknologi , 77 (1). pp. 153-162. ISSN 2180-3722

Yusup, Muhamad Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Ab Rahman, Mohd Nizam (2015) The Implementation Of Cleaner Production Practices From Malaysian Manufacturers Perspectives. Journal Of Cleaner Production, 108. pp. 659-672. ISSN -

Yusup, Muhamad Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Mohd Yusof, Azrul Shahimy (2015) Review The Influence Of Lean Tools And Its Performance Against The Index Of Manufacturing Sustainability. International Journal Of Agile Systems And Management, 8. pp. 116-131. ISSN -

Z

Zainal Abidin, Muhammad Zaimi and Mohd Rosli, Zulkifli and Mohamad Juoi, Jariah and Mahamud, Zainab (2015) Nanocomposite TiAlBN Coatings As A Corrosion Protection Layer For AZ91 Mg Alloy Substrate In NaCl. Materials Science Forum, 819. pp. 109-114. ISSN 1662-9752

Zainal Abidin, Muhammad Zaimi and Zulkifli, Mohd Rosli and Mohamad Juoi, Jariah and Mahamud, Zainab (2015) Corrosion Performance Of Nitrided Based Coating On AZ91 Mg Alloy In Hank’s Solution. Materials Science Forum, 819. pp. 303-308. ISSN 0255-5476