Items where Division is "Faculty of Manufacturing Engineering" and Year is 2016

Abdul Hamid, Rahimah and Ito, Teruaki (2016) 3D Prosthodontics Wire Bending Mechanism With A Linear Segmentation Algorithm. Journal of Advanced Manufacturing Technology (JAMT) . PP 33- 45. ISSN 1985-3157

Abdul Rahman, Azrul Azwan and Mohamad, Nor Rizan (2016) Software-In-The-Loop Technique: An Approach To Support Reconfiguration Of Manufacturing System. ARPN Journal Of Engineering And Applied Sciences, 11 (16). pp. 9789-9795. ISSN 1819-6608

Alhawari, Khalid Salim and Omar, Mohd Zaidi and Ghazali, Mariyam Jameelah and Salleh, Mohd Shukor (2016) Dry Sliding Wear Behaviour Of Thixoformed Hypoeutectic AL–SI–CU Alloy With Different Amounts Of Magnesium. Journal Composite Interfaces, 23 (6). pp. 519-531. ISSN 0927-6440

Ali, Aidy and Subramonian, Sivarao and Amran, Mohammad and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Effect of fiber loading on the mechanical properties of bagasse fiber–reinforced polypropylene composites. Advances in Mechanical Engineering, 8 (8). pp. 1-5. ISSN 1687-8132

Ali, Aidy and Subramonian, Sivarao and Amran, Mohammad and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Effect of fiber loading on the mechanical properties of bagasse fiber–reinforced polypropylene composites. Advances In Mechanical Engineering, 8 (8). pp. 1-5. ISSN 1687-8132

Ali, Aidy and Subramonian, Sivarao and Md Ali, Mohd Amran and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Performance evaluation of reworked weld joints. International Journal of Engineering and Technologies, 9. pp. 5-12. ISSN 2297-623X

Anisah, Abd Latiff and Noraiham, Mohamad and Jeefferie, Abd Razak and Mohd Hayatunnufus, Md Nasir and Siti Rahmah, Shamsuri and Mazlin Aida, Mahamood and Muhamad Ilman Hakimi Chua, Abdullah and Hairul Effendy, Ab Maulod (2016) Correlation Of Wear Characteristics With Hardness Of Recycled Carbon Fiber Prepreg Reinforced Polypropylene Composites. Journal Of Materials Research, 31 (13). pp. 1908-1913. ISSN 0884-2914

Aziz, Ahmad and Omar, Mohd Zaidi and Salleh, Mohd Shukor (2016) Microstructural Evolution Of A333 Alloy Through Semisolid Metal Process. Sains Malaysiana, 45 (6). pp. 977-987. ISSN 0126-6039

Burvill, Colin and Field, Bruce and Abdullah, Zulkeflee and Alias, Maizam (2016) Problem-solving with industrial drawings: Supporting formal graphics language development for Malaysian engineering graduates. The International Journal Of Engineering Education, 32 (5). pp. 2172-2183. ISSN 0949149X

Che Haron, Che Hassan and Sulaiman, Mohd Amri and A Ghani, Jaharah and Kasim, Mohd Shahir and Mohamad, Effendi (2016) Performance Of Carbide Tool In High Speed Turning Of TI-6AL-4V ELI Under Conventional Coolant And Minimal Quantity Lubrication. ARPN Journal Of Engineering And Applied Sciences, 11 (7). pp. 4817-4821. ISSN 1819-6608

Chiew, Tsung Heng and Jamaludin, Zamberi and Bani Hashim, Ahmad Yusairi and Rafan, Nur Aidawaty and Abdullah, Lokman and Salleh, Mohd Rizal and Arep @ Ariff, Hambali (2016) Design and analysis of super twisting sliding mode control for machine tools. Jurnal Teknologi , 78 (10-3). pp. 25-29. ISSN 2180-3722

Kamat, Seri Rahayu and Mahmood, Noor Shakir and Ajmi, Ahmed Ali (2016) Review And Establishing Framework Model To An Adoption Of ISO 50001 Energy Management System In Power Stations. Journal of Advanced Manufacturing Technology (JAMT) , 10 (2). pp. 67-78. ISSN 1985-3157

Liew, Pay Jun and Abdul Razak, Muhammad Raziman and Hussein, Nur Izan Syahriah and Ahsan, Qumrul (2016) Experimental Investigation Of Electrical Discharge Machining Using Dielectric Fluid With Surfactant And Different Carbon Additives. International Journal Of Applied Engineering Research, 11 (15). pp. 8507-8510. ISSN 0973-4562

Maziati Akmal, M. H. and Mohd Warikh, Abd Rashid and Umar Al-Amani, Azlan and Mohd Asyadi Azam, Mohd Abid and Syahriza, Ismail (2016) Effect Of Amphoteric Dopant On The Dielectric And Structural Properties Of Yttrium Doped Potassium Sodium Niobate Thin Film. Materials Letters, 170. pp. 10-14. ISSN 0167-577X

Muhamad Shahirul, Mat Jusoh and Mohd Yazid, Yahya and Nur Izan Syahriah, Hussein (2016) The Effect Of Fibre Layering Pattern In Resisting Bending Loads Of Natural Fibre-Based Hybrid Composite Materials. MATEC Web Of Conferences, 39. 01005-1. ISSN 2261-236X

Noraiham, Mohamad and Mazliah, Mazlan and Jeefferie, Abd Razak and Nur Sharafina, Zainol and Amirul Asyraf, Mat Nasir and Hairul Effendy, Ab Maulod (2016) Compressive Properties Of Green Rubber Foam From Reclaimed Rubber Glove. International Journal of Materials And Product Technology, 53 (3-4). pp. 252-266. ISSN 0268-1900

Norsiah, Hami and Mohd Razali, Muhamad and Zuhriah, Ebrahim (2016) The Impact Of Sustainable Manufacturing Practices On Sustainability. Jurnal Teknologi, 78 (1). pp. 139-152. ISSN 0127-9696

Nurul Azuwa, Azmi and Umar Al-Amani, Azlan and Maziati Akmal, Mohd Hatta and Mohd Asyadi ‘Azam, Mohd Abid and Mohd Warikh, Abd Rashid (2016) A Study On (K, Na) NbO3 Thin Films With Optimized Layer: Effect On Physical And Electrical Properties. Key Engineering Materials, 694. pp. 120-124. ISSN 1662-9795

Saiful Izwan, Abd Razak and Izzati Fatimah, Wahab and Mohammed Rafiq, Abdul Kadir and Ahmad Zahran, Md Khudzari and Abdul Halim, Mohd Yusof and Farah Nuruljannah, Dahli and Nadirul Hasraf, Mat Nayan and T. Joseph Sahaya, Anand (2016) Biomimetic Growth Of Hydroxyapatite On Kenaf Fibers. BioResources, 11 (1). pp. 1971-1981. ISSN 1930-2126

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Alhawari, Khalid Salim and Mohammed, Mohammed Naser and Md Ali, Mohd Amran and Mohamad, Effendi (2016) Microstructural evolution and mechanical properties of thixoformed A319 alloys containing variable amounts of magnesium. Transactions of Nonferrous Metals Society of China, 26. pp. 2029-2042. ISSN 1003-6326

Talib, Elyas and Mohd Abid, Mohd Asyadi 'Azam (2016) An extensive study on carbon nanomaterials electrode from electrophoretic deposition technique for energy storage device. Journal Of Materials Research, 31 (13). pp. 1972-1982. ISSN 0884-2914

Zainal Abidin, Muhammad Zaimi and Azran, Mohd Nor and Muhamad, Khaizaki and M., Alifd and Abdul Aziz, Mohd Sanusi and Azam, Mohd Asyadi and Kasim, Mohd Shahir and Munawar, Rose Farahiyan and Abd Manaf, Mohd Edeerozey (2016) Electroless Ni-Co-Cu-P Alloy Deposition In Alkaline Hypophosphite Based Bath. Key Engineering Materials, 694. pp. 151-154. ISSN 1662-9795