Items where Division is "Faculty of Manufacturing Engineering" and Year is 2017

A. Perumal, Puvanasvaran and Yoong, Sai Sieng and Tay, Choo Chuan (2017) Effect Of Hidden Wastes In Overall Equipment Effectiveness Calculation. ARPN Journal Of Engineering And Applied Sciences, 12 (22). pp. 6443-6448. ISSN 1819-6608

A. Perumal, Puvanasvaran and Yoong, Sai Sieng and Tay, Choo Chuan (2017) Effect Of Hidden Wastes In Overall Equipment Effectiveness Calculation. ARPN Journal of Engineering and Applied Sciences, 12 (22). pp. 6443-6448. ISSN 1819-6608

Abd Rashid, Mohd Warikh and Mat Harttar @ Mohd Hatta, Maziati Akmal and Azmi, Nurul Azuwa and Azlan, Umar Al-Amani (2017) The Effects Of Different Annealing Temperature And Number Of Deposition Layers On The Crystallographic Properties Sodium Niobate (KNN) Thin Films Synthesized By Sol-Gel Spin Coating Technique. Journal Of Advanced Manufacturing Technology, 11 (1). pp. 91-102. ISSN 1985-3157

Abdullah, Lokman and Anang, Nur Amira and Jamaludin, Zamberi and Chiew, Tsung Heng and Maharof, Madihah and Retas, Zain and Che Ku Junoh, Sahida and Syed Salim, Syed Najib (2017) Tracking Performance Of NPID Controller For Cutting Force Disturbance Of Ball Screw Drive. Journal of Mechanical Engineering and Sciences (JMES) , 11 (2). pp. 3227-3239. ISSN 2231-8380

Abdullah, Lokman and Anang, Nur Amira and Jamaludin, Zamberi and Retas, Zain and Chiew, Tsung Heng and Syed Salim, Syed Najib (2017) Precise Positioning Control Strategy Of Machine Tools: A Review. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (3-2). pp. 11-15. ISSN 2180-1843

Ani, Mohammad Firdaus and Kamat, Seri Rahayu and Mohd Ghazali, Athirah (2017) Development Of A Regression Model For Relationship Between Psychophysical And Biomechanics Factors Of Push Activities. Malaysian Journal of Human Factors and Ergonomics, 1 (2). pp. 1-9. ISSN 2590-3705

Ani, Mohammad Firdaus and Kamat, Seri Rahayu and M., Mohamad and Hambali, Ruzy Haryati and Husain, Kalthom (2017) A Study Of Psychophysical Factor (Heart Rate) For Driver Fatigue Using Regression Model. Malaysian Journal of Public Health Medicine 2017, Special Vol. (1), 1. pp. 1-9. ISSN -

Arif @ Harip, Afraha Baiti and Munawar, Rose Farahiyan and Abdul Rashid, Muhammad Faiz Haiqal and Abd Razak, Jeefferie and Mohd Abid, Mohd Asyadi 'Azam and Abd Manaf, Mohd Edeerozey and Ismail, Syahriza and Dimin @ Mohd Amin, Mohd Fairuz and Abdullah, Hazwani Husna (2017) Influence of pulping process conditions towards better water resistant effect of durian shell paper by lignin: Two level factorial design approach. ARPN Journal of Engineering and Applied Sciences, 12 (9). pp. 2743-2750. ISSN 1819-6608

Bistamam, Mohd Shahril Amin and Mohd Abid, Mohd Asyadi Azam and Zulkapli, Nor Najihah (2017) Surface interaction between carbon patches and catalyst nanoparticle as the key factor in aligned carbon nanotube growth using alcohol catalytic CVD. NANO : Brief Reports and Reviews, 12 (1). pp. 1750012-1. ISSN 1793-2920

Chan, Chee Hoong and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Abu Bakar, Hamizan and Sundi, Syahrul Azwan and Zakaria, Kamarul Ariffin and Che Haron, Che Hassan and Abdul Ghani, Jaharah and Mohd Shahrim, Mohammad Shah All Hafiz (2017) Analysis Of Face Milling Performance On Inconel 718 Using FEM And Historical Data Of RSM. Materials Science And Engineering, 270 (1). pp. 1-11. ISSN 1757-8981

Chiew, Tsung Heng and Jamaludin, Zamberi and Bani Hashim, Ahmad Yusairi and Abdullah, Lokman and Rafan, Nur Aidawaty (2017) Design of super twisting algorithm for chattering suppression in machine tools. International Journal Of Control, Automation And Systems, 15 (3). pp. 1259-1266. ISSN 1598-6446

Ebrahim, Zuhriah and Abdul Rasib, Amir Hamzah (2017) Unnecessary overtime as a component of time loss measures in assembly processes. Journal Of Advanced Manufacturing Technology, 11 (1). pp. 37-47. ISSN 1985-3157

Halim, Isa and Radin Umar, Radin Zaid and Ahmad, Nadiah and Abdul Rahim, Ruslinda and Zakaria, Nurul Farahizzati (2017) Conceptual Design Of Shielded Metal Arc Welding Workstation: Work Posture And Bead Dimension Consideration. Journal Of Advanced Manufacturing Technology (JAMT), 11 (2). pp. 19-32. ISSN 1985-3157

Hasan, Muhammad Syahid and Ebrahim, Zuhriah and Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam (2017) Decision support system classification and its application in manufacturing sector: A review. Jurnal Teknologi, 79 (1). pp. 153-163. ISSN 0127-9696

Hasan, Muhammad Syahid and Ebrahim, Zuhriah and Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam (2017) Sustainable-ERP system: A preliminary study on sustainability indicators. Journal Of Advanced Manufacturing Technology, 11 (1(SI)). pp. 61-73. ISSN 1985-3157

Jamaludin, Zamberi and Huong, Yu Chung and Abdullah, Lokman (2017) Radio Frequency Identification Based System Design For Logistics Application. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (3-2). pp. 17-20. ISSN 2180-1843

Kamaruddin, Mohammad Aizrulshah (2017) Additive Manufacturing In Medical Application,A Comparative Study Between Conventionally Made Prosthesis (Pylon) And Fused Deposition Modelling Prosthesis (Pylon). Masters thesis, Universiti Teknikal Malaysia Melaka.

Kamat, Seri Rahayu and Md Zula, Nur Emelia Natasha and Rayme, Nur Syafiqah and Shamsuddin, Syamimi and Husain, K. (2017) The Ergonomics Body Posture On Repetitive And Heavy Lifting Activities Of Workers In Aerospace Manufacturing Warehouse. IOP Conference Series: Materials Science And Engineering, 210 (1). pp. 1-12. ISSN 1757-8981

Liew, Weng Tack and Mohd Abid, Mohd Asyadi Azam and Raja Seman, Raja Noor Amalina (2017) Structural And Electronic Properties Of Transition-Metal Oxides Attached To A Single-Walled CNT As A Lithium-Ion Battery Electrode : A First-Principles Study. American Chemical Society, 121 (-). pp. 2636-2642. ISSN 2636−2642

Mahamood, Mazlin Aida and Mohamad, Noraiham and Abd Razak, Jeefferie and Mohd Zain, Amirul Hakimi and Shueb, Mohammed Iqbal and Ab Maulod, Hairul Effendy (2017) Correlation Of Open Cell Structure With Properties Of Green Rubber Foam From Epoxidised Natural Rubber/Reclaimed Rubber Glove. Journal of Mechanical Engineering, S1 (1). pp. 113-122. ISSN 1823- 5514

Mat, Irwan (2017) Effect Of Microwave Curing On Laminate Composites Performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat Harttar, Maziati Akmal and Abd Rashid, Mohd Warikh and Azlan, Umar Al-Amani and Azmi, Nurul Azuwa and Salleh, Mohd Shukor and Kasim, Mohd Shahir (2017) Optimizing The Processing Conditions Of Sodium Potassium Niobate Thin Films Prepared By Sol-Gel Spin Coating Technique. Ceramics International, 44. pp. 317-325. ISSN 0272-8842

Mat Harttar @ Mohd Hatta, Maziati Akmal (2017) Lead-free piezoelectric energy harvester based on optimised potassium sodium niobate thin film. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mat Noor, Noraina Alia and Abd Razak, Jeefferie and Ismail, S. and Mohamad, N. and Yaakob, M. Y. and T. H., Theng (2017) Influence Of MWCNTs Addition On Mechanical And Thermal Behavior Of Epoxy/Kenaf Multi-Scale Nanocomposite. IOP Conference Series: Materials Science And Engineering, 210. pp. 1-10. ISSN 1757-899X

Mazlan, Mazliah and Mohamad, Noraiham and Ab Maulod, Hairul Effendy and Abd Razak, Jeefferie and Othman, Intan Sharhida and Hashim, Hanizam and Mohd Abid, Mohd Asyadi 'Azam and Ahsan, Qumrul and Mohd Safeai, Nur Maizatul Nadia and Mohd Mef’at, H. (2017) Weight Loss By Soil Burial Degradation Of Green Natural Rubber Vulcanizates Modified By Tapioca Starch. Proceedings Of Mechanical Engineering Research Day 2017. pp. 405-407. ISSN -

Md Ali, Mohd Amran and Abdul Aziz, Mohd Sanusi and Redzuwan, Bahrin Ikram and Muhammad Zaimi, Zainal Abidin and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Mizobuchi, Akira and Ishida, Tohru (2017) Mechanical Properties And Cutting Performance Of Electroless Ternary Ni-W-P Coated Cutting Tools. Jurnal Teknologi , 79 (5-2). pp. 101-104. ISSN 2180-3722

Md Ali, Mohd Amran and Mohd Ali, Noorfa Idayu and Abdullah, Zulkeflee and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Abdul Aziz, Mohd Sanusi and Abdullah, Abu (2017) Interchangeable Core And Cavity Plates For Two-Plate Family Injection Mould. Journal Of Mechanical Engineering And Sciences (JMES), 11 (3). pp. 2815-2824. ISSN 2289-4659

Mohamad, Noraiham and Yaakub , Juliana and Ab Maulod, Hairul Effendy and Abd Razak, Jeefferie and Yaakob, Mohd Yuhazri and Lau, Kok Tee and Ahsan, Qumrul and Shueb, Mohammed Iqbal and Othman, R. (2017) Vibrational Damping Behaviors Of Graphene Nanoplatelets Reinforced NR/EPDM Nanocomposites. Journal Of Mechanical Engineering And Sciences (JMES), 11 (4). pp. 3274-3287. ISSN 2289-4659

Mohamad Ishak, Nurul Naili and Salleh, Mohd Shukor and Yahaya, Saifudin Hafiz and Mohamad, Effendi and Sulaiman, Mohd Amri (2017) The Effect of Equal Channel Angular Pressing (ECAP) on the Microstructure and Hardness of A356 Aluminium Alloy. Journal Of Advanced Manufacturing Technology (JAMT), 11 (2). pp. 47-57. ISSN 1985-3157

Mohd Abid, Mohd Asyadi 'Azam and Raja Seman, Raja Noor Amalina and Mohamed Effendi, Salmi (2017) Preparation Of Hydrous Ruthenium Oxide/Activated Carbon Electrode And Its Supercapacitive Performance In 6 M KOH. Journal Of Advanced Manufacturing Technology (JAMT) , 11 (2). pp. 1-8. ISSN 1985-3157

Mohd Abid, Mohd Asyadi Azam and Alias, Farizul Muiz and Liew, Weng Tack and Raja Seman, Raja Noor Amalina and Mohamad Taib, Mohamad Fariz (2017) Electronic Properties And Gas Adsorption Behaviour Of Pristine, Silicon-, And Boron-Doped (8, 0) Single-Walled Carbon Nanotube : A First Principles Study. Journal of Molecular Graphics and Modelling, 75 (-). pp. 85-93. ISSN 1093-3263

Mohd Kassim, Mohammad Khairul Azmi (2017) Mechanical Properties Of Aluminium Alloy 1100 Series Thick And Thin Materials Welded Using Bobbin Friction Stir Welding. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Nasir, Faarih Farhan (2017) Analysis On Effect Of Ball Bladder Size During Water Hammer In Domestic Water System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nik Mohd Salleh, Nik Muhammad Farid and Shamsudin, Zurina and Mohamad Juoi, Jariah and Mustafa, Zaleha (2017) Effects Of Heating Rates And SBE Loading On Sintered Properties Of Spent Bleach Earth/Recycled Glass Composite. Journal Of Mechanical Engineering And Sciences (JMES), 11 (4). pp. 3104-3115. ISSN 2289-4659

Norazman, Farhaneem and Dimin @ Mohd Amin, Mohd Fairuz and Shaaban, Azizah and Mohamad, Noraiham (2017) Optimization of phosphoric acid treatment biochar using response surface method. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (SI). pp. 453-466. ISSN 1985-3157

Norazman, Farhaneem and Se, Sian Meng and Dimin @ Mohd Amin, Mohd Fairuz and Shaaban, Azizah (2017) Microstructural analysis on biochar obtained from rubber wood sawdust via slow pyrolysis. Solid State Phenomena, 264. pp. 13-16. ISSN 1662-9779

Osman, Edynoor and Abd Rashid, Mohd Warikh and T., Moriga and K., Murai and Abd Manaf, Mohd Edeerozey (2017) Transparent Coating Oxide - Indium Zinc Oxide As Conductive Coating : A Review. Reviews On Advanced Materials Science, 49. pp. 150-157. ISSN 1605-8127

Rafan, Nur Aidawaty (2017) Stick Slip Friction Models Control Design Approach For Friction Compensation In Machine Tools Drive System. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Rahim, Siti Lydia (2017) Study Of The Implementation Of Additive Manufacturing At PROTON Using Analytic Hierarchy Process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Razak, Muhammad Shahmi and Sulaiman, Mohd Amri and Mat, Siti Asiyah and Ramle, Zuraimi and Mohamad, Effendi and Salleh, Mohd Rizal (2017) The Effect Of Cryogenic Cooling On Surface Roughness Of Titanium Alloy: A Review. Journal Of Advanced Manufacturing Technology (JAMT), 11 (2). pp. 101-114. ISSN 1985-3157

Safian, Mohd Azizul Hikmi and Salleh, Mohd Shukor and Subramonian, Sivarao and Hussein, Nur Izan Syahriah and Sulaiman, Mohd Amri and Yahaya, Saifudin Hafiz (2017) Production Of LM4 Feedstock For Thixoforming By Using Cooling Slope Casting. Journal Of Advanced Manufacturing Technology (JAMT) , 11 (1). pp. 77-90. ISSN 1985-3157

Salleh, Mohd Shukor and Ishak, Anuar and Mohamad, Effendi and Sukarma, Lukman and Mahmood, Azmi B.R. and A Rahman, Muhamad Arfauz and Yahaya, Saifudin Hafiz and Salleh, Mohd Shukor and Sulaiman, Mohd Amri (2017) Cleaner Production Implementation Using Extended Value Stream Mapping For Enhancing The Sustainability Of Lean Manufacturing. Journal of Advanced Manufacturing Technology (JAMT) , 2289-8 (1). pp. 47-60. ISSN 1985-3157

Salleh, N. and Shamsudin, Zurina and Mohamad Juoi, Jariah and Mustafa, Zaleha (2017) Effects Of Heating Rates And SBE Loading On Sintered Properties Of Spent Bleach Earth/Recycled Glass Composite. Journal Of Mechanical Engineering And Sciences (JMES), 11 (4). pp. 3104-3115. ISSN 2289-4659

Shaaban, Azizah and Mohamad Yatim, Norazlina and Dimin @ Mohd Amin, Mohd Fairuz and Yusof, Faridah and Abd Razak, Jeefferie (2017) Multiwalled carbon nanotubes enhancing nitrogen uptake and use efficiency of urea fertlizer by paddy. Jurnal Teknologi, 79 (5-2). pp. 105-109. ISSN 0127-9696

Su, Muhammad Nasiruddin and Arep @ Ariff, Hambali and Jaafar, Roshidah and Widodo, Wahyono Sapto and Ahmad, Mohd Nazri (2017) A Review Of Energy Absorption Of Automotive Bumper Beam. International Journal of Applied Engineering Research, 12 (2). pp. 238-245. ISSN 0973-4562

Tajry, Mohd Zulhairi (2017) Development Of Cutter Geometrical Feature For Machining Thin Wall Part. Masters thesis, Universiti Teknikal Malaysia Melaka.

Taufiq, M.J. and Mustafa, Zaleha and Mansor, Muhd Ridzuan (2017) Utilisation Of Recycled Thermoplastics Sourced From Rejected-Unused Disposable Diapers As Polymer Blends. Journal Of Mechanical Engineering And Sciences (JMES), 11 (4). pp. 3137-3143. ISSN 2289-4659

Wahid, Siti Zaleha (2017) rHDPE-rPP Hybrid Blends From Injection Molding Scrap : Characterization For Conventional Milling Workpiece Application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wong, Kylie Muh Shin (2017) Sound Absorption Characteristics Of Spent Tea Leaf Fiber-Rubber Composite Materials. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yaakob, Mohd Yuhazri and K. M., Hafiz and Y. Z. A., Myia and Jia, C. P. and Sihombing, Haeryip and Salit, Mohd Sapuan and Badarulzaman, Nur Azam (2017) Evaluation on compression properties of different shape and perforated rHDPE in concrete structures. Journal Of Physics: Conference Series, 914 (1). pp. 1-8. ISSN 1742-6588

Zainal Abidin, Mohammad Anas and Dimin @ Mohd Amin, Mohd Fairuz and Said, Md Radzai and Se, Sian Meng and Shaaban, Azizah and Abd Rahman, Md Nizam (2017) Optimization Of Fluidised Bed Granulation Process Parameters For Urea Granule Manufacturing Using The Response Surface Method. Solid State Phenomena, 264. pp. 182-185. ISSN 1662-9779

Zainul Abidin, Siti Nursyafiqa (2017) Development Of Simulator Training Centre For The Manufacturing Of Automative Seating. Masters thesis, Universiti Teknikal Malaysia Melaka.