Items where Division is "Faculty of Manufacturing Engineering" and Year is 2022

Article

Abd Manaf, Mohd Edeerozey and Shueb, Mohammed Iqbal and Mohamad, Noraiham and Abdullah Sani, Nurhernida and Alkaseh, Adel Ali (2022) Modification of nylon 66/graphene nanoplatelet composites via electron beam irradiation. Malaysian Journal of Microscopy, 18 (2). pp. 132-141. ISSN 1823-7010

Abd Manaf, Mohd Edeerozey and Shueb, Mohammed Iqbal and Mohamed, Mahathir and Umar, Khairil Nor Kamal and Mohamad, Noraiham and Abd Razak, Jeeferie and Abdullah Sani, Nurhernida (2022) Thermal characterization of non-functionalized low content graphene nanoplatelets (GNP) added nylon 66 polymer. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 89 (1). pp. 13-25. ISSN 2289-7879

Abd Rahman, Md Nizam and Alahdal, Mohamed Abdulwahab Abdulwali and Mosali, Najmaddin Abo (2022) Innovative initiatives in influencing the success of solar energy implementation in UAE. International Journal of Sustainable Construction Engineering and Technology, 13 (4). pp. 205-215. ISSN 2180-3242

Abd Rahman, Md Nizam and Zulkipli, Nur Hidayah and Kasim, Mohd Shahir and Jamli, Mohamad Ridzuan and Budi, Esmar (2022) Impact of Argon gas shielding flow rate on the hardness of weld joint. Journal of Advanced Manufacturing Technology (JAMT), 16 (1). 01-10. ISSN 1985-3157

Abdul Aziz, Mohd Fareezuan and Mohd Abid, Mohd Asyadi 'Azam and Mohd Noor, Ikhwan Syafiq and Ali @ Buraidah, Mohd Hamdi and Mohd Arof, Abdul Kariem (2022) Improvement of dye sensitized solar cells efficiency utilizing diethyl carbonate in PVA based gel polymer electrolytes. International Journal On Advanced Science, Engineering And Information Technology, 12 (1). pp. 334-339. ISSN 2088-5334

Abdul Aziz, Mohd Fareezuan and Mohd Abid, Mohd Asyadi 'Azam and S. N. F. Yusuf and M. H. Buraidah and A. K. Arof (2022) Influence of potassium iodide in polyvinyl alcohol-based gel polymer electrolyte for efficiency enhancement of dye-sensitized solar cells. Journal of Polymer Research, 29. pp. 1-8. ISSN 1022-9760

Abdul Hamid, Rahimah and Husni, Siti Nur Hidayah and Ito, Teruaki and Linke, Barbara Sabine (2022) Effect of printing orientation and layer thickness on microstructure and mechanical properties of PLA parts. Malaysian Journal on Composites Science and Manufacturing, 8 (1). pp. 11-23. ISSN 2716-6945

Abdul Rahman, Azrul Azwan and Joshua, Adeboye Oluwamayowa and Joe Yee, Tan and Salleh, Mohd Rizal and Rahman, M.A.A (2022) An optimization approach for predictive-reactive job shop scheduling of reconfigurable manufacturing systems. JORDAN JOURNAL OF MECHANICAL AND INDUSTRIAL ENGINEERING, 16 (5). pp. 793-809. ISSN 1995-6665

Abdullah, Lokman and Batih, Hakimul and Nur Chairat, Arief Suardi and Maslan, Mohd Nazmin (2022) Applications of Marginal Abatement Cost Curve (MACC) for reducing greenhouse gas emissions: a review of methodologies. Nature Environment and Pollution Technology, 21 (3). pp. 1317-1323. ISSN 0972-6268

Abdullah, Lokman and Kamaludin, Khairun Najmi and AG Mohamad, Ampuan Marzuki and Jamaludin, Zamberi and Nordin, Mohd Hisham (2022) Design of a PID controller embedded with Taguchi method for precise positioning of an XY table ball screw drive system. Journal of Advanced Manufacturing Technology (JAMT), 16 (1). pp. 47-59. ISSN 1985-3157

Abdullah, Lokman and Ramanathan, Rprakash and Syed Mohamed, Muhammad Syafiq and Md Fauadi, Muhammad Hafidz Fazli (2022) A review of user-centred design methods for designing a portable oil spill skimmer. Nature Environment and Pollution Technology, 21 (4). pp. 1519-1529. ISSN 0972-6268

Al Amin, Mohamed Sultan and Wan Mahmood, Wan Hasrulnizzam and Md Saad, Mohd Shamsuri and Qi Hang, Yoong and Mativenga, Paul Tarisai (2022) Critical materials determination as a complement to the product recycling desirability model for sustainability in Malaysia. Applied Sciences, 12 (7). pp. 34-56. ISSN 2076-3417

Alshami, Hamzah Ali and Abdullah, Shariman and Salleh, Mohd Shukor (2022) Adoption of MES in complying with the national standard MS 1500:2009 in Malaysia. Journal of Positive School Psychology, 6 (5). pp. 3625-3635. ISSN 3625-3635

Bonifacius, Nurhamdoko and Mohamad, Effendi and Tutuko, Pindo and Yuniawan, Dani and Aini, Nurul and Zhenjiang, Shen and Yamato, Yuya and Sulaksono, Aditya Galih (2022) The pattern of land use integration in historic areas in the CBD zone: Comparative study of space syntax attributes of Malang, Melaka, and Kanazawa. International Review for Spatial Planning and Sustainable Development, 10 (3). pp. 148-169. ISSN 2187-3666

Halim, Isa and Zainal Abidin, Muhammad Zaimi and Abdullah, Shariman and Abdullah, Zulkeflee and A. Perumal, Puvanasvaran and Muhammad, Mohd Nazrin and Saptari, Adi (2022) Critical factors influencing user experience on passive exoskeleton application: A review. International Journal Of Integrated Engineering, 14 (4). pp. 89-115. ISSN 2229-838X

Ibrahim, Muhammad Shafiq and Kamat, Seri Rahayu and Shamsuddin, Syamimi and Fukumi, Minoru (2022) Mathematical regression analysis of oxygen saturation for driving fatigue using Box-Behnken design. International Journal of Emerging Technology and Advanced Engineering, 12 (9). 23 - 29. ISSN 2250-2459

Kamat, Seri Rahayu and Ibrahim, Muhammad Shafiq and Shamsuddin, Syamimi and Md Isa, Mohd Hafzi and Ito, Momoyo (2022) Electroencephalogram (EEG)-based systems to monitor driver fatigue: a review. International Journal of Nanoelectronics and Materials, 15 (SI). 365 - 380. ISSN 1985-5761

LING, CHAI FONG and Radin Umar, Zaid @ Radin Zaid and Ahmad, Nadiah (2022) DEVELOPMENT OF A PREDICTIVE MODEL FOR WORK RELATEDNESS OF MSDS AMONG SEMICONDUCTOR BACK-END WORKERS. INTERNATIONAL JOURNAL OF OCCUPATIONAL SAFETY ANDERGONOMICS, 28 (2). pp. 872-882. ISSN 1080-3548

Liew, Pay Jun and Kursus Othman, Maisarah and Chang, Siang Yee and Wang, J. and Yap, C.Y. (2022) Thermophysical properties of quarry dust suspension and aluminum oxide suspension as cutting fluid for machining. Journal of Advanced Manufacturing Technology (JAMT), 16 (1). pp. 1-10. ISSN 1985-3157

Liew, Pay Jun and Kursus Othman, Maisarah and Che Sidik, Nor Azwadi and Wang, Jingsi (2022) Recent progress on the application of nanofluids and hybrid nanofluids in machining: a comprehensive review. The International Journal of Advanced Manufacturing Technology, 121. pp. 1455-1481. ISSN 0268-3768

Md Ali, Afifah and Omar, Mohd Zaidi and Mohamed, Intan Fadhlina and Wakhi Anuar, Nur Farah Bazilah and Salleh, Mohd Shukor and Hashim, Hanizam (2022) Mechanical behaviour and morphology of thixoformed aluminium alloy reinforced by graphene. Materials, 15 (19). pp. 1-15. ISSN 1996-1944

Mohamad, Effendi and Adiyanto, Okka and Abd Razak, Jeefferie (2022) Systematic review of plastic waste as eco-friendly aggregate for sustainable construction. International Journal of Sustainable Construction Engineering and Technology, 13 (2). pp. 243-257. ISSN 2180-3242

Mohamad, Effendi and Adiyanto, Okka and Faishal, Muhammad and Jaafar, Roshidah and Ma’ruf, Farid and Anggraeni, Anggi (2022) Application of nordic body map and rapid upper limb assessment for assessing work-related musculoskeletal disorders: A case study in small and medium enterprises. International Journal of Integrated Engineering, 14 (4). pp. 10-19. ISSN 2229-838X

Mohamad, Effendi and Ishak, Anuar and Arep @ Ariff, Hambali (2022) The application of six sigma for process control analysis in the Malaysian poultry wastewater treatment. Journal of Ecological Engineering, 23 (5). pp. 116-129. ISSN 2299-8993

Mohd Abid, Mohd Asyadi 'Azam and Raja Seman, Raja Noor Amalina and Mohamed, Mohd Ambri and Ani, Mohd. Hanafi (2022) Effect of polytetrafluoroethylene binder content on gravimetric capacitance and life cycle stability of graphene supercapacitor. International Journal of Automotive and Mechanical Engineering, 19 (3). 9964 -9970. ISSN 2229-8649

Mohd Abid, Mohd Asyadi 'Azam and Safie, Nur Ezyanie (2022) Understanding the structural properties of feasible chemically reduced graphene. AIMS Materials Science, 9 (4). pp. 617-627. ISSN 2372-0484

Mohd Abid, Mohd Asyadi 'Azam and Safie, Nur Ezyanie and Md Sairi, Mohamad Nazmi Faiz and Takasaki, Akito (2022) Development and analysis of rGO‑MoS2 nanocomposite as top electrode for the application of inverted planar perovskite solar cells via SCAPS‑1D device simulation. Journal of Materials Research. pp. 1-12. ISSN 0884-2914

Mohd Abid, Mohd Asyadi Azam and Abdul Aziz, Mohd Fareezuan and Safie, Nur Ezyanie and Tunku Adaham, Tunku Aidil Ilham and Tan, Jun Yu and Takasaki, Akito (2022) A comprehensive review of filler, plasticizer, and ionic liquid as an additive in GPE for DSSCs. AIMS Energy, 10 (6). pp. 1122-1145. ISSN 2333-8326

Mohd Abid, Mohd Asyadi Azam and Abdul Aziz, Mohd Fareezuan and Tunku Adaham, Tunku Aidil Ilham and Safie, Nur Ezyanie and Mupit, Muazzin and Takasaki, Akito (2022) Characterization of reduced graphene oxide/activated carbon-based electrode containing mixing CMC-SBR binder and application in supercapacitor. Jurnal Teknologi, 84 (6-2). pp. 53-57. ISSN 2180–3722

Mohd Abid, Mohd Asyadi Azam and Abdul Aziz, Mohd Fareezuan and Tunku Adaham, Tunku Aidil Ilham and Tan, Jun Yu and Takasaki, Akito (2022) Ionic conductivity of polyvinyl alcohol-based gel electrolyte containing diethyl carbonate plasticizer for supercapacitor application. Jurnal Teknologi, 84 (6-2). pp. 59-63. ISSN 2180–3722

Mohd Abid, Mohd Asyadi Azam and Kosnan, Muhammad Akmal and Safie, Nur Ezyanie and Munawar, Rose Farahiyan and Takasaki, Akito (2022) Recent progress of electrode architecture for MXene/MoS2 supercapacitor: preparation methods and characterizations. Micromachines, 13 (11). pp. 1-27. ISSN 2072-666X

Othman, Norhayani and Hassan, Azman and Jia, Xin Chan and Joon, Fatt Wong and Abd Razak, Jeefferie and Nirmal, Umar and Hashim, Shahrir and Yern, Chee Ching and Yunos, Muhamad Zaini and Yahaya, Ridwan and Gunathilake, Thennakoon Mudiyanselage Sampath Udeni (2022) Synthetic wollastonite nanofiber for polybutylene terephthalate nanocomposite: Mechanical, thermal, tribological and flammability properties. Polymer, 256 (125259). pp. 1-13. ISSN 0032-3861

Salleh, Mohd Rizal and Rahman, Irfan ur and Mohamad, Effendi and Nawaz, Rashid and A Rahman, Muhamad Arfauz (2022) Proposing multi-item replenishment model for an inventory management system of Malaysia’s SMEs. Jordan Journal of Mechanical and Industrial Engineering, 16 (3). pp. 395-401. ISSN 1995-6665

Salleh, Mohd Shukor and Wakhi Anuar, Nur Farah Bazilah and Yahaya, Saifudin Hafiz and Omar, Mohd Zaidi and Ali, Mohd Azamuddin and Subramonian, Sivarao (2022) Characteristics of A1Si7Mg0.3/X-GNPs composites manufactured via stir casting method. Journal Of Advanced Manufacturing Technology (JAMT), 16 (2). pp. 29-40. ISSN 1985-3157

Shukur, Muhammad Fadhlullah and Rojudi, Zaiful Edi and Shamsuri, Nurrul Asyiqin and Abdulkadir, Bashir Abubakar and Hamsan, Muhamad Hafiz and Aziz, Mohd Fareezuan and Mohd Abid, Mohd Asyadi ’Azam (2022) Effect of ethylene carbonate addition on ion aggregates, ion pairs and free ions of polyvinyl alcohol-methylcellulose host: selection of polymer electrolyte for possible energy devices application. Journal of Polymer Research, 29 (6). pp. 1-12. ISSN 1022-9760

Suhami, Muhammad Wafiuddin and Ab Wahab, Norfariza and Boejang, Hambali and Hamzah, Khairum and Sasahara, Hiroyuki (2022) Characteristics of pinewood dust combined with vinyl ester composites through material testing and machining. Manufacturing Technology, 22 (5). pp. 590-597. ISSN 1213-2489

Wang, Jingsi and Liu, Xiaohan and Teng, Dezhi and Liew, Pay Jun and Huang, Chaoming (2022) Electrorheological fluid–assisted ultrasonic polishing for IN625 additively manufactured surfaces. The International Journal of Advanced Manufacturing Technology, 120 (1-2). pp. 891-905. ISSN 0268-3768

Wang, Jingsi and Liu, Xiaolong and Liew, Pay Jun and Zhu, Jiaqi and Li, Changhe and Huang, Chuanzhen (2022) Ultrasonic abrasive polishing of additive manufactured parts: An experimental study on the effects of process parameters on polishing performance. Advances in Production Engineering & Management, 17 (2). pp. 193-204. ISSN 1854-6250

Yahaya, Saifudin Hafiz and Salleh, Mohd Shukor and Abd Rashid, Mohd Warikh and Abdullah, Abu and Jano, Zanariah and Miura, Kenjiro Takai (2022) An extensive analysis of frequency and transient responses in S and C-shaped gears. Australian Journal of Mechanical Engineering, 20 (3). 825 - 837. ISSN 1448-4846

Yusaf, Talal and Faisal Mahamude, Abu Shadate and Kamarulzaman, Muhamad Kamal and Wan Harun, Wan Sharuzi and Kadirgama, Kumaran and Ramasamy, Devarajan and Farhana, Kaniz and Abu Bakar, Rosli and Subramonian, Sivarao and Yousif, Belal (2022) A comprehensive review on efficiency enhancement of solar collectors using hybrid nanofluids. Energies, 15 (4). pp. 1-26. ISSN 1996-1073

Book Chapter

Azam, Mohd Asyadi and Raja Seman, Raja Noor Amalina (2022) Analysis and characterization of carbon nanotube. In: Graphene, Nanotubes and Quantum Dots-Based Nanotechnology. Woodhead Publishing, Cambridge, United Kingdom, pp. 333-355. ISBN 9780323854580

Aziz, M. F. and Azam, Mohd Asyadi (2022) MXene-based 2D nanomaterials for solar cells. In: Energy applications of 2D nanomaterials. CRC Press, Boca Raton, Florida, pp. 1-19. ISBN 9781003178422

Mohd Abid, Mohd Asyadi Azam and Safie, Nur Ezyanie and Abdul Aziz, Mohd Fareezuan (2022) Characterization of hierarchical porous materials. In: Advanced functional porous materials. Springer, Switzerland, pp. 407-429. ISBN 9783030853976

Mupit, Muazzin and Islam, Muhammad Remanul and Azam, Mohd Asyadi and Smdani, Md Gulam and Mohd Yunus, Rosli and Firouzi, Amin and Ong, Siew Kooi (2022) Performance of graphene oxide doped polyaniline composite electrodes for energy storage: Effects of in-situ synthesis. In: Advanced transdisciplinary engineering and technology. Springer, Switzerland, pp. 253-269. ISBN 9783031014888

Raja Seman, Raja Noor Amalina and Azam, Mohd Asyadi (2022) Chalcogenide based 2D nanomaterials for supercapacitors. In: Nanostructured materials for supercapacitors. Springer, New York, USA, pp. 359-374. ISBN 9783030993023

Safie, Nur Ezyanie and Azam, Mohd Asyadi (2022) Graphene-based 2D nanomaterials for solar cells. In: Energy applications of 2D nanomaterials. CRC Press, Boca Raton, Florida, pp. 1-20. ISBN 9781003178422