Items where Division is "Faculty of Mechanical Engineering > Department of Automotive" and Year is 2013

A

ABDULLAH, Mohd Azman and Mansor, Muhd Ridzuan and Mohd Tahir, Musthafah and Abdul Kudus, Syahibudil Ikhwan and Hassan, Muhammad Zahir and Ngadiman, Mad Nasir (2013) Design, Analysis and Fabrication of Chassis Frame for UTeM Formula VarsityTM Race Car. International Journal of Mining, Metallurgy and Mechanical Engineering (IJMMME), 1 (1). pp. 75-77. ISSN 2320 –4060

ABDULLAH, Mohd Azman and Mansor, Muhd Ridzuan and Tamaldin, Noreffendy and Thanaraj, Krishnan (2013) Development of Formula Varsity Race Car Chassis. IOP Conf. Series: Materials Science and Engineering, 50 (012001). pp. 1-11. ISSN 1757-899X

ABDULLAH, Mohd Azman and Sulaiman, Nurfarahin and Mat Idera, Ikhwan Hakim and Mohd Razi, Mohd Zakwan and Ngadiman, Mad Nasir (2013) Design and Fabrication of Vehicle All-Wheel-Nuts Remover. International Journal of Computer Science and Electronics Engineering (IJCSEE). pp. 381-384. ISSN 2320-401X

ABDULLAH, Mohd Azman and Tamaldin, Noreffendy and Rusnandi, Herdy and Manoharan, Tayalan and Samsir, Muhammad Afiq (2013) Development and Modification of a Single Overhead Camshaft 4-Valve 4-Stroke 135 cc Formula Varsity Race Car Engine. IOP SCIENCE IOP Conf.Series:MaterialsScienceandEngineering, 50. pp. 1-7. ISSN 1757-899X

ABDULLAH, Mohd Azman and tamaldin, noreffendy and Abdul Aziz, Muhammad Khatib and Munawar, Ahmad Fadhli and Ngadiman, Mad Nasir (2013) Increasing the Tire Life Span by Means of Water Cooling. International Journal of Mining, Metallurgy & Mechanical Engineering (IJMMME), 1 (1). pp. 78-80. ISSN 2320–4060

ABDULLAH, Mohd Azman and Ibrahim, Azhar and Hudha, Khisbullah (2013) Multibody Dynamics Models of Railway Vehicle Using Adams/Rail. Applied Mechanics and Materials, 393. p. 644. ISSN 1662-7482

ABDULLAH, Mohd Azman and Ibrahim, Azhar and MICHITSUJI, Yohei and NAGAI, Masao (2013) ACTIVE CONTROL OF HIGH-SPEED RAILWAY VEHICLE PANTOGRAPH CONSIDERING VERTICAL BODY VIBRATION. INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET), 4 (6). pp. 263-274. ISSN 0976 – 6340

ABDULLAH, Mohd Azman and Zainordin, Ahmad Zaifazlin and Hudha, Khisbullah (2013) Validation and Experimental Evaluation of Magnetorheological Brake-by-Wire System. Journal of Engineering and Technology, 4. pp. 109-122. ISSN 2180-3811

Abdollah, Mohd Fadzli bin (2013) Preliminary Design of Side Door Impact Beam for Passenger Cars using Aluminium Alloy. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 5 (1). pp. 11-18. ISSN 2180-1053

Abdollah, Mohd Fadzli bin and Mazlan, Mohd Afiq Azfar and Amiruddin, Hilmi and tamaldin, noreffendy (2013) Frictional Behavior of Bearing Material Under Gas Lubricated Conditions. Procedia Engineering , 68. pp. 688-693. ISSN 1877-7058

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Mat Nuri, Nur Rashid (2013) Optimized Nanolubricant for Friction Reduction. In: 40th Leeds-Lyon Symposium on Tribology & Tribochemistry Forum 2013, 4 - 6 September 2013, Lyon, France.

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2013) Optimization of Tribological Performance of hBN/AL2O3 Nanoparticles as Engine Oil Additives. Procedia Engineering , 68. pp. 313-319. ISSN 1877-7058

H

HARUN, Mohd Hanif and W Abdullah, W. M. Zailimi and ABDULLAH, Mohd Azman and JAMALUDDIN, Hishamuddin and ABD RAHMAN, Roslan and HUDHA, Khisbullah (2013) The Analysis of Railway Vehicle with Semi-Active Secondary Suspension System under Harmonic Excitation Disturbance. In: Annual Conference on Engineering and Information Technology 2014, 28-30 June 2013, Seoul, Korea.

Hanafi, M.H.M and Wan Mahmood, W.M.F and Abdollah, Mohd Fadzli bin and Saleman, Abdul Rafeq and Nor, N.F.M and Zulfattah, Z. M. and Shamsudin, S.A and Ibrahim, A. (2013) Comparison of Soot Particle Movement based on Crank Angle. Procedia Engineering , 68. pp. 245-250. ISSN 1877-7058

Hassan, Muhammad Zahir and Abdul Kudus, Syahibudil Ikhwan and Halid, Mohd Shazni and Abdul Manaf, Muhammad Zaidan (2013) Stability Analysis for Buoyancy UTeM’s Amphibious Hybrid Vehicle (AHV). International Journal of Mechanical Engineering applications Research – IJMEAR, 4 (E090). pp. 296-302. ISSN 2249- 6564

Hassan, Muhammad Zahir and Abdul Manaf, Muhammad Zaidan and Halid, Mohd Shazni and Alehan, Muhammad Nadzeer and Md Isa, Amjad Saddar (2013) UTeM`s Amphibious Hybrid Vehicle: Ride and Handling Analysis. Applied Mechanics and Materials, 393. pp. 354-359. ISSN 1662-7482

Hassan, Muhammad Zahir and Razali, Muhammad Razil and Halid, Mohd Shazni (2013) Design and Development of Amphibious Hybrid Vehicle Body Structure. International Journal of Science and Research (IJSR). pp. 220-223. ISSN 2319-7064

Hassan, Muhammad Zahir and Zainal Ariffin, Haziq Irfan (2013) Development of Vehicle Blind Spot System for Passenger Car. Applied Mechanics and Materials, 393. pp. 350-353. ISSN 1662-7482

Hassan, Muhammad Zahir (2013) The evaluation of disc brake squeal propensity through a fully coupled transient thermomechanical model. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 227 (3). pp. 361-375. ISSN 0954-4070

Hassan, Muhammad Zahir and Alehan, Muhammad Nadzeer and Md Isa, Muhammad Fahmi and Abdul Manaf, Muhammad Zaidan (2013) Design, Analysis and Fabrication of Space Frame Chassis for Amphibious Hybrid Vehicle. International Journal of Engineering Sciences Research-IJESR. pp. 864-866. ISSN 2230-8504

Hassan, Muhammad Zahir and Md Isa, Muhammad Fahmi and Razali, Muhammad Razil and Abdul Manaf, Muhammad Zaidan (2013) Structure Analysis of Cast Iron for Dry Clutch of Amphibious Vehicle. International Journal of Engineering Trends and Technology (IJETT), 4 (5). pp. 1768-1771. ISSN 2231-5381

M

Mansor, Muhd Ridzuan and Salit, Mohd Sapuan and Zainudin, Edi Syams and Abd Aziz, Nuraini and Arep @ Ariff, Hambali (2013) Stiffness prediction of hybrid kenaf/glass fiber reinforced polypropylene composites using rule of mixtures (ROM) and rule of hybrid mixtures (RoHM). Journal of Polymer Materials, 30 (3). pp. 321-334. ISSN 0973-8622

Mansor, Muhd Ridzuan and Salit, Mohd Sapuan and Zainudin, Edi Syams and Abd Aziz, Nuraini and Ariff, Hambali (2013) Hybrid natural and glass fibers reinforced polymer composites material selection using Analytical Hierarchy Process for automotive brake lever design. Materials and Design, 51. pp. 484-492. ISSN 0261-3069

Mohamad, Noraiham and Zainol, Nur Sharafina and Rahim, Faisal Faris and Ab Maulod, Hairul Effendy and Abd Rahim, Toibah and Shamsuri, Siti Rahmah and Mohd Abid, Mohd Asyadi Azam and Abdollah, Mohd Fadzli bin and Abd Manaf, Mohd Edeerozey (2013) Mechanical and Morphological Properties of Polypropylene/Epoxidized Natural Rubber Blends at Various Mixing Ratio. Procedia Engineering , 68. pp. 439-445. ISSN 1877-7058

R

Rahmat, Mohd Sabirin and Ahmad, Fauzi and Mat Yamin, Ahmad Kamal and Aparow, Vimal Rau and Tamaldin, Noreffendy (2013) Modelling and Torque Tracking Control of Permanent Magnet Synchronous Motor For Hybrid Electric Vehicles. International Journal of Automotive and Mechanical Engineering , 7. pp. 955-967. ISSN 2229-8649 (Print); 2180-1606 (Online)

S

Saleman, Abdul Rafeq and Zulfattah, Z. M. and Najib, M. Ali and Rody, M. Z. M and Fadhli, Syahrial and Abdollah, Mohd Fadzli bin and Hanafi, M.H.M (2013) Preliminary Study of CST in Malaysia based on Field Optical Efficiency. Procedia Engineering , 68. pp. 238-244. ISSN 1877-7058

T

tamaldin, noreffendy and Mat Yamin, Ahmad Kamal and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and ABDULLAH, Mohd Azman (2013) Design Optimization of Thermal Management System for Electric Vehicle Utilizing CFD Analysis, DFMEA and CES. Procedia Engineering , 68. pp. 305-312. ISSN 1877-7058

Z

Zainordin, Ahmad Zaifazlin and ABDULLAH, Mohd Azman and Hudha, Khisbullah (2013) Experimental Evaluations on Braking Responses of Magnetorheological Brake. International Journal of Mining, Metallurgy & Mechanical Engineering (IJMMME). pp. 195-199. ISSN 2320-4052

Zainordin, Ahmad Zaifazlin and ABDULLAH, Mohd Azman and Hudha, Khisbullah (2013) Modelling and validation of magnetorheological brake responses using parametric approach. IOP Conf. Series: Materials Science and Engineering. pp. 1-8. ISSN 1757-899X

Zakaria, Nazri Huzaimi and Mohamad Zin, Mohd Rody and Abdollah, Mohd Fadzli bin and Saleman, Abdul Rafeq and Amiruddin, Hilmi and tamaldin, noreffendy (2013) Elastohydrodynamics Lubrication for Bio-Based Lubricants in Elliptical Conjunction. Procedia Engineering , 68. pp. 123-129. ISSN 1877-7058