Items where Division is "Faculty of Mechanical Engineering > Department of Automotive" and Year is 2014
Up a level |
Article
ABDULLAH, Mohd Azman and Ramli, Faiz Redza and Lim, Ching Sheng (2014) Railway Dynamics Analysis Using Lego Mindstorms. Applied Mechanics and Materials , Volume. pp. 13-17. ISSN 1662-7482
Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Chua, Khai Wei and Mat Tahir, Noor Ayuma (2014) Potential of palm kernel activated carbon epoxy (PKAC-E) composite as solid lubricant: effect of load on friction and wear properties. Jurnal Tribologi, 2. pp. 31-38. ISSN 2289-7232
Abdollah, Mohd Fadzli and Mazlan, Mohd Afiq Azfar and Amiruddin, Hilmi and Tamaldin, Noreffendy (2014) Experimental Study on Friction and Wear Behaviors of Ball Bearings under Gas Lubricated Conditions. Jurnal Teknologi , 66 (3). pp. 43-49. ISSN 2180-3722
Abdul Kadir, Faizul Akmar and Tamaldin, Noreffendy and Ayob, Md Razali and ABDULLAH, Mohd Azman and HUDHA, Khisbullah and Mat Yamin, Ahmad Kamal (2014) Vehicle Speed Control Using Gain Scheduling PID with Experimental Throttle-in-the-Loop. International Review on Modelling & Simulations, 7 (4). pp. 682-693. ISSN 1974-9821
Abdul Kadir, Faizul Akmar and Tamaldin, Noreffendy and Ayob, Md Razali and Abdullah, Mohd Azman and Hudha, Khisbullah and Mat Yamin, Ahmad Kamal (2014) Vehicle Speed Control Using Gain Scheduling PID With Experimental Throttle-In-The-Loop. International Review on Modelling & Simulations, 7 (4). pp. 682-693. ISSN 1974-9821
Abdullah, Mohd Azman and Salim, Mohd Azli and Putra, Azma (2014) Linear And Angular Displacement Relationship Of Natural Rubber Engine Isolator. Applied Mechanics and Materials, 575 (-). pp. 250-253. ISSN 1660-9336
Abdullah, Mohd Azman and Tamaldin, Noreffendy and Ramli, Faiz Redza and Sudin, Mohd Nizam and Mohamed Muslim, Abdul Mu'in (2014) Analysis Of The Chassis And Components Of All Terrain Vehicle (ATV). Applied Mechanics and Materials, 660. pp. 753-757. ISSN 1660-9336
Abdullah, Mohd Azman and Tamaldin, Noreffendy and Ramli, Faiz Redza and Sudin, Mohd Nizam and Mohamed Muslim, Abdul Mu'in (2014) Design And Development Of Low Cost All Terrain Vehicle (ATV). Applied Mechanics and Materials, 663 (-). pp. 517-521. ISSN 1660-9336
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Mat Nuri, Nur Rashid and tamaldin, noreffendy and Hassan, Masjuki and Saleman, Abdul Rafeq (2014) Effect of hBN/Al2O3 nanoparticles on engine oil properties. Energy Education Science and Technology Part A: Energy Science and Research. pp. 3261-3268. ISSN 1308-772X
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2014) Effect of hBN/Al2O3 Nanoparticle Additives on the Tribological Performance of Engine Oil. Jurnal Teknologi , 66 (3). pp. 1-6. ISSN 2180-3722
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid and Hassan, Masjuki and Saleman, Abdul Rafeq (2014) Improving Engine Oil Properties by Dispersion of hBN/Al2O3 Nanoparticles. Applied Mechanics and Materials. pp. 70-73. ISSN 1660-9336
HARUN, Mohd Hanif and WAN ABDULLAH, Wan Mohd Zailimi and JAMALUDDIN, Hishamuddin and ABD RAHMAN, Roslan and Khisbullah , Hudha (2014) Dynamic Response of Commuter Rail Vehicle under Lateral Track Irregularity. Applied Mechanics and Materials, 548-54. pp. 948-952. ISSN 1662-7482.
Harun, Mohd Hanif and W. Abdullah @ Zakaria, W. Mohd Zailimi and Jamaluddin, Hishamuddin and Abd. Rahman, Roslan and Hudha, Khisbullah (2014) Analysis Of Primary And Secondary Lateral Suspension System Of Railway Vehicle. Journal of Mechanical Engineering, 11 (2). pp. 19-40. ISSN 1823- 5514
Harun, Mohd Hanif and W. Abdullah@Zakaria, W. Mohd Zailimi and Jamaluddin, Hishamuddin and Ab Rahman, Roslan and Hudha, Khisbullah (2014) Hybrid Skyhook-Stability Augmentation System For Ride Quality Improvement Of Railway Vehicle. Applied Mechanics And Materials, 663. pp. 141-145. ISSN 1662-7482
Mansor, Muhd Ridzuan and Salit, Mohd Sapuan and Zainudin, Edi Syams and Abd Aziz, Nuraini and Arep @ Ariff, Hambali and Alias, Mohd Fuad (2014) A simplified life cycle analysis of an automotive parking brake lever using polymer composites. Applied Mechanics and Materials, 699. pp. 395-400. ISSN 1660-9336
Mansor, Muhd Ridzuan and Salit, Mohd Sapuan and Zainudin, Edi Syams and Abd Aziz, Nuraini and Ariff, Hambali (2014) Conceptual design of kenaf fiber polymer composite automotive parking brake lever using integrated TRIZ–Morphological Chart–Analytic Hierarchy Process method. Materials and Design, 54. pp. 473-482. ISSN 0261-3069
Mansor, Muhd Ridzuan and Sapuan, S.M and Hambali, Arif and Zainudin, Edi Syams and Nuraini, A.A. (2014) Materials Selection of Hybrid Bio-Composites Thermoset Matrix for Automotive Bumper Beam Applicationusing Topsis Method. Advances in Environmental Biology, 8 (8). pp. 3138-3442. ISSN 1995-0756
Mansor, Muhd Ridzuan and Sapuan, S.M and Zainudin, E.S. and Nuraini, A.A. and Hambali, Arif (2014) Thermoplastic Matrix Material Selection using Multi Criteria Decision Making Method for Hybrid Polymer Composites. Applied Mechanics and Materials, 564. pp. 439-443. ISSN 1660-9336
Mansor, Muhd Ridzuan and Sapuan, S.M and Zainudin, Edi Syams and Abd Aziz, Nuraini and Hambali, A (2014) Rigidity Analysis of Kenaf Thermoplastic Composites using Halpin-Tsai Equation. Applied Mechanics and Materials , 548-54. pp. 29-33. ISSN 1662-7482
Mohamad, Noraiham and Zainol, Nur Sharafina and Rahim, Faisal Faris and Mohd Salleh, Mohd Khuzaimi and Azam, Mohd Asyadi and YAAKOB, MOHD YUHAZRI and Abd Manaf, Mohd Edeerozey and Ab Maulod, Hairul Effendy and Abdollah, Mohd Fadzli bin (2014) Interaction of Mixing Factors with Mechanical Properties of PP/ENR Blend via Response Surface Methodology. Journal of Mechanical Engineering, 11 (1). pp. 1-13. ISSN 1823-5514
Mohd Husin, Mohd Haizal and Mohd Ridzuan, Nordin and Imran Syakir, Mohamad and liew, kong yong (2014) Pt–Cu bimetallic nanoparticles synthesized by polyol method under different reduction conditions. Journal of Mechanical Engineering and Technology. pp. 77-86. ISSN 2180-1053
Mohd Tahir, Musthafah and Ali, Muhammad Syahir and Mohd Shafie, Abdul Muhaimin and Abu Bakar, Rosli (2014) Simulation of single cylinder engine fuel with alternative fuel by using available software. International Review of Mechanical Engineering, 8 (4). pp. 798-802. ISSN 1970-8734
Mustafa, Ashafi'e and Abdollah, Mohd Fadzli bin and Ismail, Nurhidayah and Amiruddin, Hilmi and Noritsugu, Umehara (2014) Materials Selection for Eco-Aware Lightweight Friction Material. Mechanics & Industry. pp. 279-285. ISSN 2257-7777
Musthafah, Mohd Tahir and Salim, Mohd Azli and Herawan, Safarudin Gazali and Abu Bakar, Rosli (2014) Feasibility study for energy recovery from internal combustion engine's waste heat. International Review of Mechanical Engineering, 8 (1). pp. 223-227. ISSN 1970-8734
Nurfaizey , Abdul Hamid and Stanger, Jonathan and Tucker, Nick and Buunk, Neil and Wood, Alan R. and Staiger, Mark (2014) Control of spatial deposition of electrospun fibre using electric field manipulation. Journal of engineered fibers and fabrics, 9 (1). pp. 155-164. ISSN 1558-9250
Phuman Singh, A.S. and Mat Darus, I.Z. (2014) Active roll control strategy using fuzzy logic control active suspension. WSEAS transactions on systems and control, 9. pp. 566-573. ISSN 2224-2856
Porter, Sophie and Mat Yamin, Ahmad Kamal and Svetlana, Aleksandrova and Benjamin, Stephen and Roberts, Carol A. and Jonathan, Saul (2014) An assessment of CFD applied to steady flow in a planar diffuser upstream of an automotive catalyst monolith. SAE International Journal of Engines, 7 (-). pp. 8-15. ISSN 1946-3936
Rahmat, Mohd Sabirin and Ahmad, Fauzi and Mansor, Muhd Ridzuan and Mat Yamin, Ahmad Kamal and tamaldin, noreffendy (2014) Design and Development of Light Weight Engine Mounting for UTeM Formula Varsity Race Car. Applied Mechanics and Materials. pp. 484-488. ISSN 1660-9336
Salit, Mohd Sapuan and Mansor, Muhd Ridzuan and Zainudin, Edi Syams and Abd Aziz, Nuraini and Arep @ Ariff, Hambali (2014) Application of integrated AHP-TOPSIS method in hybrid natural fiber composites materials selection for automotive parking brake lever component. Australian Journal of Basic and Applied Sciences, 8 (5). pp. 431-439. ISSN 1991-8178
Sapuan, S.M. and Mansor, Muhd Ridzuan (2014) Concurrent engineering approach in the development of composite products: A review. Materials and Design, 58. pp. 161-167. ISSN 0261-3069
Book Chapter
Mansor, Muhd Ridzuan and Sapuan, S.M (2014) Materials Selection for Lightweight Automotive Composite Hand Operated Parking Brake Lever Design with a Weighted Property Index Method. In: Engineering Composites: Properties and Applications. UPM Press, Serdang, pp. 248-264. ISBN 978-967-344-396-3
Conference or Workshop Item
Abdollah, Mohd Fadzli bin and Abdullah, Muhammad Ilman Hakimi Chua and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2014) Drive to Greener Future: Tribological and Engine Performances of Nano-Oil. In: JAST Tribology Conference, Spring 2014, 19 - 21 May 2014, Tokyo.
Abdollah, Mohd Fadzli bin and Abdullah, Muhammad Ilman Hakimi Chua and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2014) The hBN Nanoparticles as an Effective Additive in Engine Oil to Enhance the Durability and Performance of a Small Diesel Engine. In: Proceedings of 41th Leeds-Lyon Symposium on Tribology 2014, 2-5 September 2014, Leeds, United Kingdom.
Amiruddin, Hilmi and Abdollah, Mohd Fadzli bin and Mazlan, Mohd Afiq Azfar and tamaldin, noreffendy (2014) Effect of Lubrication Environments on Wear Performance of Ball Bearing Materials. In: Proceedings of 41th Leeds-Lyon Symposium on Tribology 2014, 2-5 September 2014, Leeds, United Kingdom.
Ashafi'e, Mustafa and Abdollah, Mohd Fadzli bin and Ismail, Nurhidayah and Amiruddin, Hilmi and Umehara, Noritsugu (2014) Pre-Materials Selection for Eco-Aware Lightweight Friction Material. In: 9th International Materials Technology Conference and Exhibition, 13 - 16 May 2014, Kuala Lumpur.
Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2014) The Effect on Friction Coefficient and Wear Rate of Palm Kernel Activated Carbon-Epoxy (PKAC-E) Composite at Different Temperatures. In: 3rd Malaysia-Japan Tribology Symposium 2014 (MJTS2014), 12-14 November 2014, Malaysia-Japan Internation Institute of Technology (MJJIT).
Musthafah, Mohd Tahir and Mohd Shafie, Abdul Muhaimin and Ali, Muhammad Syahir and Yusmady, Mohamed Arifin and Abu Bakar, Rosli (2014) INTAKE ANALYSIS ON FOUR-STROKE ENGINE USING CFD. In: International Conference on Automotive Innovation and Green Energy Vehicle 2014, 26 -27 August 2014, Swiss Garden Resort & Spa, Kuantan, Pahang. (Submitted)