Items where Division is "Faculty of Mechanical Engineering > Department of Structure and Materials" and Year is 2011

Abd Samad, Md Fahmi (2011) Deterministic Mutation-Based Algorithm for Model Structure Selection in Discrete-Time System Identification. International Journal of Intelligent Control and Systems, 16 (3). pp. 182-190. ISSN 02187965

Ali, Mohd Basri (2011) Analysis of an Instrumented Charpy Impact Using Power Spectrum Density. Key Engineering Materials. pp. 130-135. ISSN 1013-9826

Ali, Mohd Basri (2011) Test Simulation using Finite Element Method. Journal of Physics: IOP conference series: Material Science and Engineering (doi:10). 012-013. ISSN 1757-8981

Mohammad, Janatul Islah and Johari, Norhasnira and Said, Md. Radzai and Mohd. Nor, Mohd. Jailani (2011) Experimental results on sound absorption coefficients of Malaysian woods. In: International Conference on Noise 2011, 4-7 Sept 2011, Osaka Japan.

Ong, K.Y. and SAID, MD RADZAI (2011) A Study on the Deposition of Tin on the Contac ts Subjected to High Frequency Impac t Loading in Semiconductor Device Testing. Journal of Mechanical Engineering and Technology, 3 (1). pp. 1-9. ISSN 2180-1053

Putra, Azma (2011) Application of Micro-perforated Panel (MPP) in a Vehicle Vabin: Overcoming the ‘Mass-Air-Mass’ Resonance. In: Hari Penyelidikan 2011, Fakulti Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, 20 Julai, Melaka, Malaysia.

Putra, Azma (2011) Determination of Vibration Strength of a Small Structure-Borne Source Using a High Mobility Reception Plate. In: Hari Penyelidikan 2011, Fakulti Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, 20 Julai, Melaka, Malaysia.

Putra, Azma (2011) Dried Paddy Straw Fibers as an Acoustic Absorber: A Preliminary Study. In: Hari Penyelidikan 2011, Fakulti Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, 20 Julai, Melaka, Malaysia.

Putra, Azma (2011) Employing the micro-perforated panel in the vehicle cabin: Is this possible? In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Putra, Azma (2011) Experimental Investigation on the Effect of Liquid Fill Level in a Container to Liquid Sloshing. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Putra, Azma (2011) Investigation on Natural Waste Fibers from Dried Paddy Straw as a Sustainable Acoustic Absorber. In: 2011 IEEE First Conference on Clean and Technology CET, 27-29 June, Kuala Lumpur, Malaysia.

Putra, Azma (2011) On a Simple Technique to Measure the Airborne Noise in a Motor Vehicle using Source Substitution. In: Hari Penyelidikan 2011, Fakulti Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, 20 Julai, Melaka, Malaysia.

Putra, Azma (2011) Radiation efficiency of unbaffled and perforated plates near a rigid reflecting surface. Journal of Sound and Vibration, 330. pp. 5443-5459. ISSN 0022-460X

Putra, Azma and Ayob, Md Razali (2011) Sound Transmission Loss of a Double-Leaf Solid-Microperforated Partition Under Normal Incidence of Acoustic Loading. IIUM Engineering Journal, Special Issue in Mechanical Engineering, 12 (3). pp. 162-174. ISSN 1511-788X

Putra, Azma and Ismail, Ahmad Yusuf and Ayob, Md Razali (2011) Sound transmission loss of a double-leaf solid-microperforated partition under normal incidence of acoustic loading. In: INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND AEROSPACE EGINEERIN 2011 (ICMAAE '11), 17 May 2011, Kuala Lumpur.

Putra, Azma (2011) Peak Amplitude Transmission on High-Rise Structure by Implementing TMD Method. Advanced Science Letters, 19 (1). pp. 142-146. ISSN 1936-6612

Rafidah, Hasan and Mines, Robert and Fox, Peter (2011) Characterization of selectively laser melted Ti-6Al-4 V micro-lattice struts. Procedia Engineering , 10. pp. 536-541. ISSN 1877-7058

Ramlan, Roszaidi and Brennan, Michael John and Mace, Brian R. (2011) On the optimum parameters of a device for harvesting energy from running and walking. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 225 (4). pp. 510-521. ISSN 0959-6518

SAID, MD RADZAI and Tahir, A.S (2011) THEORETICAL ANALYSIS OF QUASI-STATIC COMPRESSION OF HEXAGONAL RING. In: The 5th PSU-UNS International Conference on Engineering and Technology, 2-3 May 2011, Phuket.

Salim, Mohd Azli and Noordin, Aminurrashid and Abdul Munir , Fudhail (2011) PID Controller for Vibration Reduction and Performance Improvement of Handheld Tools. International Journal of Mechanical and Mechatronics Engineering, 11 (2). pp. 7-16. ISSN 2077-124X

Salim, Mohd Azli and Noordin, Aminurrashid and Akop, Mohd Zaid (2011) Development of a Free-Free Transverse Beam Model Using Lateral Vibrations of Beam Conventional Method during Seismic Activity. Journal of Mathematics Research, 3 (3). pp. 77-82. ISSN 1916-9795

Salim, Mohd Azli and Noordin, Aminurrashid and Mohamad Zin, Mohd Rody and Karjanto, Juffrizal (2011) The New Generation of Building Control Concept to Suppress the Horizontal Vibration during the Earthquake. Australian Journal of Basic and Applied Sciences, 5 (4). pp. 16-25. ISSN 1991-8178

Salim, Mohd Azli (2011) Mathematical Modeling of Structural Integrity on High Rise Building Using Parallel Axis Theorem and Finite Element Analysis. International Journal of Physical and Mathematical Sciences, 2 (1). pp. 73-82. ISSN 2010-1791

Salim, Mohd Azli and Abdul Munir, Fudhail and Razali, Nadlene and Mat Nuri, Nur Rashid and Mohamad Zin, Mohd Rody (2011) Preliminary Study - Analytical Approach in Experimental Rig of Automotive Flexible Wiper System. International Journal of Physical and Mathematical Sciences, 2 (1). pp. 64-72. ISSN 2010-1791

Salim, Mohd Azli and Noordin, Aminurrashid (2011) Implementation of Active Force Control to Reduce Vibration Displacement in Active Mass Damper during Seismic Activity. Journal of Instrument, 2 (1). pp. 1-10. ISSN 2010-1856

Salim, Mohd Azli and Noordin, Aminurrashid and Abdul Munir, Fudhail (2011) Development of Low Cost High Rise Building using Austenitic-Ferritic Material in Nano-Scale Environmental Challenges to Sustain a Green. International Review of Mechanical Engineering, 5 (4). pp. 784-791. ISSN 1970-8734

Salim, Mohd Azli and Nordin, Aminurrashid (2011) Dynamic Response on Free-Free Beam in Driving Point and Transfer Mobility Measurement under Bending Load. Journal of Civil Engineering and Architecture, 5 (3). pp. 248-257. ISSN 1934-7359

Selamat, Mohd Zulkefli and Sahari, Jaafar and Muhamad, Norhamidi and Muchtar, Andanastuti (2011) The Effects of Thickness Reduction and Particles Sizes on the Properties Graphite - Polypropylene Composite. International Journal of Mechanical and Materials Engineering , 6 (2). pp. 194-200. ISSN (ISSN 1823-0334)

Selamat, Mohd zulkefli and Sahari, Jaafar and Muhamad, Norhamidi and Muchtar, Andanastuti (2011) Simultaneous Optimization for Multiple Responses on the Compression Moulding Parameters of Composite Graphite–Polypropylene Using Taguchi Method. Key Engineering Materials, 471-47 (1). pp. 361-366. ISSN 1013-9826

Sivakumar, Dhar Malingam (2011) An Investigation of Forming Analysis of Fibre-Metal Laminates through Experimental and Finite Element Analysis. In: Nineteenth International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX) Conference., Jan. 14, 2011 - Jan 17, 2011, Auckland, New Zealand.

Zakaria, Kamarul Ariffin (2011) Fatigue Damage Assessment of the Engine Mount Bracket Using a Statistical Based Approach. Advanced Materials Research, 197-19. pp. 1631-1635. ISSN ISSN 1022-6680

Zakaria, Kamarul Ariffin and Abdullah, Shahrum and Ghazali, Mariyam Jameelah (2011) The Study on Fatigue Crack Propagation in Metal Using Finite Element Analysis. Key Engineering Materials, 462-46. pp. 657-662. ISSN ISSN 1013-9826