Items where Division is "Faculty of Mechanical Engineering > Department of Structure and Materials" and Year is 2014

A

Ali, Mohd Basri and Abdullah, Shahrum (2014) Evaluating instrumented Charpy impact strain signals using curve fitting equations. Journal Central South University, 21 (DOI: 10.1007/s11771-014-1979-3). pp. 600-6009. ISSN 2227-5223

Ali, Mohd Basri and Abdullah, Shahrum (2014) Mathematical correlation for the strain signal energy characteristics obtained from instrumented charpy impact test. Pensee Journal, 76 (5). pp. 369-377. ISSN 0031-4773

Azma, Putra and Khalis, Suhaimi and Roszaidi, Ramlan (2014) A Combined Softening and Hardening Mechanism for Low Frequency Human Motion Energy Harvesting Application. Advances in Acoustics and Vibration. pp. 1-13. ISSN 1687-627X

Azma , Putra and Md Rejab, Mohd Noor Arib and Abd Rahman, Roslan and Raja Hamzah, Raja Ishak and Jawaid Iqbal, Inayat-Hussain and Ahmad , Nazirah and Ismail , Asyraf (2014) Using Transmissibility And Vibration Power Flow Methods To Evaluate The Effectiveness Of Elastomeric Mounts For Vibration And Noise Control. Proceedings of the 21st International Congress on Sound & Vibration (ICSV 21) 2014. pp. 1-8. ISSN 2329-3675

M

Md Fahmi, Abd Samad (2014) Evolutionary Computation in System Identification: Review and Recommendations. International Journal of Automatic Control. pp. 208-216. ISSN 19746059

O

O, Rostam and Subramonian, Sivarao and SAID, MD RADZAI (2014) Temperature effects on urea granules process to produce paddy fertilizer using top spray fluidized bed granulator. International Journal of Enhanced Research in Science Technology & Engineering, 3 (2). pp. 232-236. ISSN 2319-7463

P

Pokaad, Alif Zulfakar and SAID, MD RADZAI and Ahmad, Fauzi and Kamaruddin, Mohd Nazeri (2014) Simulation on Force Tracking Control of a Magnetorheological Damper under Impact Loading. Applied Mechanics and Materials, 663. pp. 158-162. ISSN 1662-7482

Putra, Azma and Munawir, Al and Mohamad, W. M. F. W. and Mohammad, J. I (2014) The Effect of Direct Field Component on A Statistical Energy Analysis (SEA) Model. Applied Mechanics and Materials, 471. pp. 279-284. ISSN 1660-9336

Putra, Azma and Ramlan, Roszaidi and Suhaimi, Khalis (2014) Translational-rotary frequency up conversion vibration based energy harvesting device for human body motion. Applied Mechanics and Materials, 471. pp. 349-354. ISSN 1660-9336

Putra, Azma and Rivai, Ahmad and Mun, Wai C. and Muhammad, Noryani (2014) Preliminary Investigation On The Perforated Panel Mobility Using Finite Element Method. Applied Mechanics and Materials, 471. pp. 341-346. ISSN 1660-9336

Putra, Azma and Sajidin, Muhammad and Salleh, Norliana (2014) Modelling the Effect of Flexural Vibration on Sound Absorption of A Micro-perforated Panel Using Wave Propagation Method. Applied Mechanics and Materials, 471. pp. 255-260. ISSN 1660-9336

Putra, Azma and Salim, Mohd Azli and ABDULLAH, Mohd Azman (2014) Mathematical formulation for bending moment wave in non-dispersive finite rod. International Review of Mechanical Engineering. pp. 523-530. ISSN 1970-8734

Putra, Azma and ABDULLAH, Mohd Azman and Salim, Mohd Azli (2014) Linear and Angular Displacement Relationship of Natural Rubber Engine Isolator. Applied Mechanics and Materials. pp. 250-253. ISSN 1660-9336

Putra, Azma and Cheah, Yee Mun and Muhammad, Noryani and Ahmad Rivai and Wai, Chee Mun (2014) The Effect Of Perforation On The Dynamics Of A Flexible Panel. Advances in Acoustics and Vibration, 2014. pp. 1-18. ISSN 1687-627X

Putra, Azma and Herawan, Safarudin Gazali and Rohhaizan, Abdul Hakim and Ismail, Ahmad Faris (2014) Prediction of Waste Heat Energy Recovery Performance in a Naturally Aspirated Engine Using Artificial Neural Network. ISRN MECHANICAL ENGINEERING. pp. 1-6. ISSN 2090-5130

Putra, Azma and Norfarizan, Siti and Samekto, H and Salim, Mohd Azli (2014) Static Analysis of a Laminated Rubber-Metal Spring Using Finite Element Method. Advanced Materials Research, Vol. 8. pp. 86-90. ISSN 1662-8985

Putra, Azma and Saari, Noor Fariza and Bakri, Hairul and Ramlan, Roszaidi (2014) Vibration strength estimation of a structure-borne source: Case study for a reception beam. Applied Mechanics and Materials, 471. pp. 69-73. ISSN 1660-9336

Putra, Azma and Salim, Mohd Azli and ABDULLAH, Mohd Azman (2014) Analysis of Axial Vibration in the Laminated Rubber-Metal Spring. Advanced Materials Research, 845. pp. 46-50. ISSN 1662-8985

Putra, Azma and Salim, Mohd Azli and ABDULLAH, Mohd Azman (2014) Predicted Transmissibility of an Experimental Approach for a Laminated Rubber-Metal Spring. American-Eurasian Journal of Sustainable Agriculture, 8 (4). pp. 104-110. ISSN 1995-0748

Putra, Azma and Shyafina, Nurain and Muhammad, Noryani and Bakri, Hairul and Saari, Noor Fariza (2014) Development of hybrid semi-analytical and finite element analysis to calculate sound radiation from vibrating structure. Advanced Materials Research, 845 (2014). pp. 71-75. ISSN 1662-8985

R

Ridhwan, J. and Hafidzal, M.H.M and Zakaria, Mohamad Shukri and Muhammad, Syafiq (2014) Effect Of Cooling Rate On Microstructures And Mechanical Properties Of C102 Copper Alloy. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 6 (1). pp. 87-94. ISSN 2180-1053

S

Salim, Mohd Azli and Putra, Azma and Abdullah, Mohd Azman (2014) Mathematical Formulation For Bending Wave In Non-Dispersive Finite Rod. International Review on Modelling & Simulations, 7 (3). pp. 523-530. ISSN 1974-9821

Sivakumar, Dhar Malingam and Radzai, Said and Rivai, Ahmad and Ahadlin, Mohd Daud and Subramonian, Sivarao (2014) Effect of Reprocessing Palm Fiber Composite on the Mechanical Properties. Applied Mechanics and Materials. pp. 146-150. ISSN 16609336

Sivakumar, Dhar Malingam and Subramonian, Sivarao and Mohd Zulkefli, Selamat and Radzai, Said (2014) Effects of Process Parameters during Forming of Glass Reinforced-pp based Sandwich Structure. Advances in Environmental Biology, 8 (8). pp. 3143-3150. ISSN 1995-0756

Sivakumar, Dhar Malingam and Subramonian, Sivarao and Selamat, Mohd Zulkefli and Radzai, Said (2014) A Study on the Mechanical and Forming Performance of Oil Palm Fiber Reinforced Polypropylene Composite. American-Eurasian Journal of Sustainable Agriculture, 8 (4). pp. 141-147. ISSN 1995-0748

Subramonian, Sivarao and Abdul Rahim, Samsudin and Tan, C. F. and Merry, Nona (2014) AHP based decision-making in concept selection of keyless grill locking system. International Journal of Mechanical & Mechatronics Engineering, 14 (5). pp. 72-79. ISSN 2077-124X (online) 2227-2771 (Print)

Subramonian, Sivarao and Mohamad, Radzai Said and Azizah, Shaaban and Mohd Fairuz, Dimin (2014) Top spray fluidized bed granulated paddy urea fertilizer. Applied Mechanics and Materials, 606. pp. 137-140. ISSN 1662-7482

Susilo, Sidik and Putra, Azma and Kok, Swee Leong (2014) Acoustic energy harvesting using flexible panel and PVDF films: a preliminary study. Applied Mechanics and Materials, 554. pp. 712-716.

W

Wai, Chee Mun and Rivai, Ahmad and Bapokutty, Omar (2014) Design and analysis of an aircraft composite hinge bracket using finite element approach. Applied Mechanics and Materials , 629 . pp. 158-163. ISSN 1660-9336

Z

Zakaria, Kamarul Ariffin (2014) Fatigue strain signal behaviour and damage assessment of an engine mount bracket. Journal of scientific & Industrial Research . pp. 112-6. ISSN 0975-1084