Items where Division is "Faculty of Manufacturing Engineering > Department of Engineering Materials" and Year is 2014

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | L | M | Q | R | S | T | Y | Z
Number of items: 35.

A

ABD RAZAK , JEEFFERIE and MOHAMAD, NORAIHAM (2014) NR/EPDM Elastomeric rubber blend miscibility evaluation by two-level fractional factorial design of experiment. AIP Proceedings - The 2014 UKM FST Postgraduate Colloquium, 1614. pp. 82-89. ISSN doi:10.1063/1.4895176 (In Press)

ABD RAZAK , JEEFFERIE and Mohamad, Noraiham and Shamsuri, Siti Rahmah (2014) The Effects of Covalent Treated Graphene Nanaoplatelets Surface Modification to Cure Characteristic, Mechanical, Physical and Morphological Properties of NR/EPDM Rubber Blend Nanocomposites. Advances in Environmental Biology, 8 (8 Spec). pp. 3289-3298. ISSN 1995-0756 (In Press)

Abd Razak, Jeefferie and Haji Ahmad, Sahrim and Ratnam, Chantara Thevy and Yaakub , Juliana and Mohd Abid, Mohd Asyadi Azam and Zainal Abidin, Muhammad Zaimi and Abd Manaf, Mohd Edeerozey and Mohamad, Noraiham (2014) Facile surface modification of graphene nanoplatelets (GNPs) using covalent ATPS-dehydration (GNPs-ATPS) and non-covalent polyetherimide adsorption (GNPs-PEI) method. Applied Mechanics and Materials, 761. pp. 391-396. ISSN 1660-9336 (In Press)

Abd Razak, Jeefferie and Ahmad, Sahrim and Thevy Ratnam, Chantara and Shueb, Mohammed Iqbal and Mahamood, Mazlin Aida and Yaakub, Juliana and Shamsuri, Siti Rahmah and Mohamad, Noraiham (2014) The Effects Of Covalent Treated Graphene Nanaoplatelets Surface Modification To Cure Characteristic,Mechanical, Physical And Morphological Properties Of NR/EPDM Rubber Blend Nanocomposites. Advances in Environmental Biology, 8. pp. 3289-3298. ISSN 1995-0756

B

Bistamam, Mohd Shahril Amin and Mohd Abid, Mohd Asyadi Azam (2014) Tip-growth of aligned carbon nanotubes on cobalt catalyst supported by alumina using alcohol catalytic chemical vapor deposition. Results in Physics, 4. pp. 105-106. ISSN 2211-3797

C

Chin, Sze Mei and Sufian, Suriati and Abd Razak, Jeefferie (2014) Synthesis And Characterization Of Hematite Nanoparticles As Active Photocatalyst For Water Splitting Application. Key Engineering Materials, 594. pp. 73-77. ISSN 1013-9826

Chin, Sze Mei and Sufian, Suriati and Abd Razak, Jeefferie (2014) Synthesis And Characterization Of Hematite Nanoparticles As Active Photocatalyst For Water Splitting Application. Key Engineering Materials, 594-59. pp. 73-77. ISSN 1013-9826

D

Dimin @ Mohd Amin, Mohd Fairuz and Se, Sian Meng and Shaaban, Azizah and Hashim, Mohammad Muaz (2014) Urea impregnated biochar to minimize nutrients loss in paddy soils. International Journal of Automotive and Mechanical Engineering (IJAME), 10 (1). pp. 2016-2024. ISSN 2229-8649

L

Lau, Kok Tee and Sorrell, Charles Christopher (2014) Effect Of Cationic Charging Agent On The Bonding Strength Of Coarse Titanium Particles Deposited By Electrophoretic Deposition. International Journal of the Institute of Materials Malaysia, 1. pp. 1-15. ISSN ISSN: 1511-8487

Lim, Pauline Huey Sia and Nayan, Nafarizal and Sahdan, Mohd Zainizan and Dahlan, Samsul Haimi and Zainal Abidin, Zuhairiah and Ismail, Muhammad Yusof and Che Seman, Fauziahanim and Suaidi, Mohamad Kadim and Mohd Johar, Fauzi and Mohd Rosli, Zulkifli and Mohamad Juoi, Jariah and Kiani, Ghaffer Iqbal (2014) Optimization of transmission lost for energy saving glass with different sheet resistance values. Advanced Materials Research , 832. pp. 233-236. ISSN 1022-6680

M

Mohamad, Noraiham and Yaakub , Juliana and ABD RAZAK , JEEFFERIE and YAAKOB, MOHD YUHAZRI and Shueb, Mohammed Iqbal and Muchtar, Andanastuti (2014) Effects of Epoxidized Natural Rubber (ENR-50) and Processing Parameters on the Properties of NR/EPDM Blends Using Response Surface Methodology. Journal of Applied Polymer Science, 131 (17). 40173 (1)-40713 (8). ISSN 1097-4628

Mohamad, Noraiham and Abd Latiff, Anisah and Ab Maulod, Hairul Effendy and Asyadi Azam, Mohd and Mohd Edeerozey, Abd Manaf (2014) A sustainable polymer composite from recycled polypropylene filled with shrimp shell waste. Polymer-Plastics Technology and Engineering, 53 (2). pp. 167-172. ISSN 1525-6111 (Submitted)

Mohamad, Noraiham and Abdul Hamid, Nor Nadiah and Abdul Aziz, Nor Abidah and Abd Razak, Jeefferie and Azlan, Umar Al-Amani and Dimin @ Mohd Amin, Mohd Fairuz and Shaaban, Azizah (2014) Potential of epoxidized natural rubber (ENR) as hydrophobicity contributor in chitosan-urea fertilizer. Applied Mechanics and Materials, 761. pp. 536-541. ISSN 1660-9336

Mohd Abid, Mohd Asyadi Azam and Abdul Manaf, Nor Syafira and RAJA ABDULLAH, RAJA IZAMSHAH and Mohamad, Noraiham (2014) Electrode Fabrication and Electrochemical Analysis of AC/Graphene-Based Electrochemical Capacitor in 1 M H2SO4. Advanced Science, Engineering and Medicine, 6. pp. 1-4. ISSN 2164-6627

Mohd Abid, Mohd Asyadi Azam and Abdul Manaf, Nor Syafira and raja seman, raja noor amalina (2014) Designing Supercapacitor from Nanocarbon Materials. In: Design and System Division Conference, 17-19 September 2014, Tokushima University, Japan.

Mohd Abid, Mohd Asyadi Azam and Bistamam, Mohd Shahril Amin and Abdul Manaf, Nor Syafira and Abd Rashid , Mohd Warikh (2014) An overview of selected catalytic chemical vapor deposition parameter for aligned carbon nanotube growth. Nanoscience & Nanotechnology-Asia, 4 (1). pp. 2-30. ISSN 2210-6820

Mohd Abid, Mohd Asyadi Azam and Bistamam, Mohd Shahril Amin and Abdul Manaf, Nor Syafira and Mohamad, Effendi (2014) Aligned Carbon Nanotube Growth from Chemical Vapor Deposition. In: Design and System Division Conference, 17-19 September 2014, Tokushima University.

Mohd Abid, Mohd Asyadi Azam and Talib, Elyas and Mohamad, Noraiham and Kasim, Mohd Shahir and Abd Rashid , Mohd Warikh (2014) Mechanical and Thermal Properties of Single-Walled Carbon Nanotube Filled Epoxidized Natural Rubber Nanocomposite. Journal of Applied Sciences, 14 (18). pp. 2183-2188. ISSN 1812-5654

Mohd Abid, Mohd Asyadi Azam and Zulkapli, Nor Najihah (2014) Parametric Study of Spin Coating Technique to Prepare Catalyst Nanoparticles. In: Design and System Division Conference, 17-19 September 2014, Tokushima University, Japan.

Mohd Rosli, ZULKIFLI and Mahamud, zainab and Wai Loon, Kwan and Jariah, Mohamad Juoi and Lau, K.T. (2014) Chemical Composition Analysis of TiAlBN Nanocomposite Coating Deposited via RF Magnetron Sputtering. Key Engineering Materials. pp. 551-555. ISSN 1013-9826

Mohd Rosli, ZULKIFLI and Pauline, lim and Nafarizal, nayan and Zainizan, sahdan and samsul haimi, dahlan and zuhairah, zainal abidin and yusuf, ismail and fauziahanim, che seman and mohd kadim, suadi and mohd fauzi, johar and Jariah, Mohamad Juoi and ghaffer, kiani (2014) Optimization of transmission lost for energy saving glass with different sheet resistance values. Advanced Materials Research. pp. 233-236. ISSN 1022-6680

Mohd Rosli, ZULKIFLI and halim, z and azizi, mat yajid and ali, R (2014) Investigation of Intermetallic Phase Formation and Structural Analysis in Annealed Al/Cu Bilayer Thin Films. Advanced Materials Research. pp. 221-225. ISSN 1022-6680

Munawar, Rose Farahiyan and Shahril, M. Khairul and Abu, Maisarah and Bani Hashim, Ahmad Yusairi (2014) Green magnetic wave absorber, the potential of paddy straw and recycled paper. Materials Research Innovations, 18. S6-21. ISSN Print ISSN: 1432-8917 ; Online ISSN: 1433-075X

Q

Qumrul, Ahsan and Asma, Haseeb and Hussein, Nur Izan Syahriah and Chang, Siang Yee (2014) 9% Nickel Steels And Their Welding Behavior. In: Comprehensive Materials Processing. Elsevier, 135 -149. ISBN 9780080965321

R

Rose Farahiyan, Munawar and Mohd Khairul Shahril, Mustaq Ahmad and Maisarah, Abu and Ahmad Yusairi, Bani Hashim (2014) Green magnetic wave absorber: The potential of paddy straw and recycled paper. Materials Research Innovations, 18 (S6). pp. 21-25. ISSN Print ISSN: 1432-8917 ; Online ISSN: 1433-075X

S

S. Thiru, Chitrambalam and Manimaran, Selvam and T., Joseph Sahaya Anand (2014) Characterization of orifice gas flow through a tubular, coated consumable welding electrode by CFD analysis. Science International, 26 (5). pp. 1773-1778. ISSN 1013-5316

Se, Sian Meng and Shaaban, Azizah and Dimin @ Mohd Amin, Mohd Fairuz and Mohamad Juoi, Jariah and Mohd Husin, Mohd Haizal and Mitan, Nona Merry Merpati (2014) Influence of heating temperature and holding time on biochars derived from rubber wood sawdust via slow pyrolysis. Journal of Analytical and Applied Pyrolysis, 107. pp. 31-39. ISSN 0165-2370

Subramonian, Sivarao and Dimin @ Mohd Amin, Mohd Fairuz and Faris N. M. F. and Arep @ Ariff, Hambali and Dhar Malingam, Sivakumar and Salit, Mohd Sapuan (2014) Analytical hierarchy process for design selection of micro hot-marking tool. Applied Mechanics and Materials, 699. pp. 897-902. ISSN 1660-9336

T

T., Joseph Sahaya Anand and Mohd , Zaidan and Mohd Abid, Mohd Asyadi Azam and Zolkepli, Buang (2014) Structural Studies of NiTe2 Thin Films with the Influence of Amino-additives. International Journal of Mechanical and Materials Engineering , 9 (18). pp. 1-7. ISSN 1823-0334

T., Joseph Sahaya Anand and Ahmad, Aminah and Hussain, Abdul Razak and Massila, Kamalrudin and A Bakar, Ahmad Zaki (2014) Crimehelp: crime scene description using mobile and web-based technology for better crime solving. Science International, 26 (4). pp. 1531-1534. ISSN 1013-5316

T., Joseph Sahaya Anand and Mohd Zaidan, Abd Aziz (2014) Electro synthesised NiTe2 Thin Films with the Influence of Additives. Advanced Materials Research, 925. pp. 159-163. ISSN 1662-8985

T., Joseph Sahaya Anand and Nor Hamizah, Mazlan (2014) Electro synthesized MoTe2 thin films and their semiconductor studies towards photoelectrochemical cell. Advanced Materials Research, 845. pp. 392-397. ISSN 1662-8985

Thangaraj, Joseph Sahaya Anand and Chua, Kok Yau and Jalar, Azman (2014) Micro-structural Studies of Thermosonic Cu-Al Bonding Interface. Advanced Materials Research, 925. pp. 154-158. ISSN 1662-8985

Y

Yaakub , Juliana and Mohamad, Noraiham and ABD RAZAK , JEEFFERIE and Jano, Zanariah and Shueb, Mohamad Iqbal (2014) Cure Characteristic, Tensile and Morphological Properties of Graphene Nanoplatelets (GNPs) Filled NR/EPDM Composites. American-Eurasian Journal of Sustainable Agriculture, 2014 Special (8) (4). pp. 148-155. ISSN 1995-0748 (In Press)

Z

Zainal Abidin, Muhammad Zaimi and Kazuhiko, Noda (2014) Effect Of Coating Thickness On Corrosion Behavior Of Electroless Quaternary Nickel Alloy Deposit In 3.5 wt% NaCl Solutions. Journal Of Advanced Manufacturing Technology (JAMT) , 8 (2). pp. 83-92. ISSN 1985-3157

This list was generated on Mon Dec 23 13:31:34 2024 +08.