Items where Division is "Faculty of Manufacturing Engineering > Department of Manufacturing Process" and Year is 2013

Article

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Ahmad, Siti Sarah Madia and Mohamad Raffi, Nurul Fatin (2013) Finite Element Model of Machining with High Pressure Coolant for Ti- 6Al-4V alloy. Procedia Engineering, 53. pp. 624-631. ISSN 1877-7058

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md. Ali, Mohd Amran and Jusoff, Kamaruzzaman and Sivarao, Subramonian and Ariff, Hambali and Hussein, Nur Izan Syahriah and Wan Mahmood, Wan Hassrulnizzam and Abdullah, Abu and Yusoff, Marianna and Shamshiri, Meysam (2013) Machining Performance of Ti-6Al-4V Titanium Alloy Assisted by High Pressure Waterjet. World Applied Sciences Journal, 21. pp. 98-104. ISSN 1818-4952

Jamli, Mohamad Ridzuan and Mohd Ihsan, Ahmad Kamal Ariffin and Abdul Wahab, Dzuraidah (2013) Integration of feedforward neural network and finite element in the draw-bend springback prediction. Expert Systems with Applications, 41. pp. 3662-3670. ISSN 0957-4174

Kasim, Mohd Shahir (2013) Surface Integrity of Newly Developed of Alsi/AlN Metal Matrix Composite during End Milling Under Dry Cutting Conditions. Research Journal of Applied Sciences, Engineering and Technology, 6 (6). pp. 1129-1134. ISSN 2040-7467

Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2013) Cutting Performances of Coated PVD in High Speed End Milling of Aged Inconel 718. Materials Science Forum, 773-774. pp. 653-660. ISSN 1662-9752

Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2013) Prediction Surface Roughness in High-Speed Milling of Inconel 718 Under Mql Using Rsm Method. Middle-East Journal of Science Research, 13 (3). pp. 264-272. ISSN 1990-9233

Kasim, Mohd Shahir (2013) Comparison between up-milling and down-milling operations on tool wear in milling Inconel 718. Procedia Engineering, 68. pp. 647-653. ISSN 18777058

Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Gusri, Akhyar Ibrahim and Mohd Zaid, Abdul Yazid and Sulaiman, Mohd Amri (2013) Tool Life Of TiAlN PVD Coated Carbide Tool In High-Speed End Milling Of Untreated Inconel 718 Under Minimum Quantity Lubrication Condition. Sains Malaysiana, 42 (12). pp. 1721-1726. ISSN 0126-6039

Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2013) Wear mechanism and notch wear location prediction model in ball nose end milling of Inconel 718. Wear, 302 (1-2). pp. 1171-1179. ISSN 0043-1648

Liew , Pay Jun and Shimada, Keita and Mizutani, Masayoshi and Yan , Jiwang and Kuriyagawa, Tsunemoto (2013) Fabrication of Microstructures on RB-SiC by Ultrasonic Cavitation Assisted Micro-Electrical Discharge Machining. International Journal of Automation Technology. pp. 621-629. ISSN 881-7629

Liew , Pay Jun and Yan , Jiwang and Kuriyagawa, Tsunemoto (2013) Carbon nanofiber assisted micro electro discharge machining of reaction-bonded silicon carbide. Journal of Materials Processing Technology. pp. 1076-1087. ISSN 0924-0136

Liew , Pay Jun and Yan , Jiwang and Kuriyagawa, Tsunemoto (2013) Experimental investigation on material migration phenomena in micro-EDM of reaction-bonded silicon carbide. Applied Surface Science. pp. 731-743. ISSN 0169-4332

Md Ali, Mohd Amran and M., Samsul and HUSSEIN, NUR IZAN SYAHRIAH and Mohd Rizal , Salleh and Raja Izamshah , Raja Abdullah and Mohd , Hadzley and Mohd Shahir, Kasim and Mohd Amri , Sulaiman and Sivarao, Subramonian (2013) The Effect of Edm Die-sinking Parameters on Material Removal Rate of Beryllium Copper Using Full Factorial Method. Middle-East Journal of Scientific Research. pp. 44-50. ISSN 1990-9233

Minhat, Mohamad and Abd. Rahman, Md Nizam (2013) A mild steel shear zone temperature minimization using genetic algorithm and direct search toolbox in cnc turning operation. International Review of Mechanical Engineering, 7 (1). pp. 38-45. ISSN 1970-8734 (In Press)

Mohamad, Noraiham and Abdul Hamid, Nor Nadiah and Lum, Yip Hing and Dimin @ Mohd Amin, Mohd Fairuz and Mohd Abid, Mohd Asyadi 'Azam and Che Hassan, Mohd Haneesyah and Mustaq Ahmad, Mohd Khairul Shahril and Shaaban, Azizah (2013) The effect of chitosan content to physical and degradation properties of biodegradable urea fertilizer. Journal of Scientific and Innovative Research, 2 (5). pp. 893-902. ISSN 2230-4818

Mohamad Jaya, Abdul Syukor and Mohd Hashim, Siti Zaiton and Haron, Habibollah and Muhamad, Mohd Razali and Abd. Rahman, Md. Nizam and Hasan Basari, Abd Samad (2013) Predictive Modeling of TiN Coating Roughness. Advanced Materials Research, 626 (2013). pp. 219-223. ISSN 1662-8985

RAJA ABDULLAH, RAJA IZAMSHAH and YAAKOB, MOHD YUHAZRI and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Subramonian, Sivarao (2013) Effects of End Mill Helix Angle on Accuracy for Machining Thin-Rib Aerospace Component. Applied Mechanics and Materials , 315 (2013). pp. 773-777. ISSN 1662-7482

Raja Abdullah, Raja Izamshah and Yuhazri, Yaakob and Mohd , Hadzley and Mohd , amran and Sivarao, Subramonian (2013) Effects of End Mill Helix Angle on Accuracy for Machining Thin-Rib Aerospace Component. Applied Mechanics and Materials, 315. pp. 773-777. ISSN 1660-9336

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohamad Naser and Alhawari, Khalid Salim (2013) Thermodynamic simulation on thixoformability of aluminium alloys for semi-solid metal processing. International Journal of Mathematics and Computers in Simulation, 7 (3). pp. 286-293. ISSN 1998-0159

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohamad Naser (2013) An overview of semisolid processing of aluminium alloys. ISRN Materials Sciences. pp. 1-9. ISSN 2356-7872

Se, Sian Meng and Shaaban, Azizah and Mitan, Nona Merry Merpati and Dimin @ Mohd Amin, Mohd Fairuz (2013) Characterization of biochar derived from rubber wood sawdust through slow pyrolysis on surface porosities and functional groups. Procedia Engineering, 68. pp. 365-371. ISSN 1877-7058

Sivarao, Subramonian and S., Thiru and Jusoff, Kamaruzzaman and Azizah, Shaaban and Mariana, Yusoff and Jano, Zanariah and Yuhazri, Yaakob and HASOLOAN , HAERY IAN PIETER and Abu Bakar, Mohd Hadzley and Raja, Izamshah and Hussein, Nur Izan Syahriah and Mohd Amran, Md Ali and Taufik, , and Wahyono Sapto, Widodo and Tan, CheeFai and Sivakumar, Dhar Malingam (2013) Modelling of CO2 Laser Materials Processing by Networked Neuro-Dimension Fuzzy Intelligent System. Australian Journal of Basic and Applied Sciences, 7 (3). pp. 35-45. ISSN 1991-8178

Sivarao, Subramonian and Samsudin, Abdul Rahim and Tin , Shaw Ling and Anuar , Mohamed Kassim and Taufik, , and Mohd Amran, Md Ali (2013) Programable Automatic Servise Time Reminder (PAST-R) To Overcome Traditional Maintenance Approach. Australian Journal of Basic and Applied Sciences, 7 (11). pp. 206-212. ISSN 1991-8178

Sivarao, Subramonian and Alif, Aziz and RAJA ABDULLAH, RAJA IZAMSHAH and Taufik, , and Hambali, A (2013) Finite Element Analysis of Super Energy Saving Locking System Towards Enhancing Door Lock Performance and Security. International Review of Mechanical Engineering, 7 (6). pp. 1147-1151. ISSN 1970-8734

Sivarao, Subramonian and Nantha, kumar and Taufik, , and Sivakumar, Dhar Malingam and Mohd Amri , Sulaiman and Kassim, M.S (2013) Heat Exchanger Analysis to Reduce Hexane Loss in Palm Kernel Oil Extraction Plant. International Journal of Mechanical and Mechatronics Engineering, 13 (4). pp. 29-33. ISSN 2077-124X

Sivarao, Subramonian and Qumrul, Ahsan and Mohd , amran and Joseph Sahaya Anand, T and Raja Izamshah , Raja Abdullah (2013) Friction Performance Analysis of Waste Tire Rubber Powder Reinforced Polypropylene Using Pin-On-Disk Tribometer. Procedia Engineering . pp. 743-749. ISSN 1877-7058

Sivarao, Subramonian and Robert, Milkey and Samsudin, Abdul Rahim (2013) RSM Modelling and Optimization of CO2 Laser Machining of Industrial PVC Foam. International Review on Modelling and Simulations, 6 (4). pp. 1339-1343. ISSN 1974-9821

Subramonian, Sivarao and Robert, Milkey and Samsudin, Abdul Rahim (2013) Taguchi modeling and optimization of laser processing in machining of substantial industrial PVC foam. International Journal of Applied Engineering Research, 8 (12). pp. 1415-1426. ISSN 0973-4562

Wan Hasrulnizzam , Wan Mahmood and Ab Rahman, Mohd Nizam and Md Deros, Baba and Jusoff, Kamaruzzaman and Adi, Saptari and Zuhriah, Ebrahim and Abu Bakar, Mohd Hadzley and Sivarao, Subramonian and Jano, Zanariah (2013) Manufacturing Performance in Green Supply Chain Management. World Applied Sciences Journal. pp. 76-84. ISSN 1818-4952

Yamaguchi, Masayuki and Yokohara , Tadashi and Md Ali , Mohd Amran (2013) Effect of flexible fibers on rheological properties of poly(Lactic Acid) composites under elongational flow. Journa of the Society of Rheology Japan. pp. 129-135. ISSN 0387-1533

Conference or Workshop Item

Jameel Abbas, Adnan and Minhat, Mohamad and Abd. Rahman, Md. Nizam (2013) Improvement Performance Characteristics of CNC Turning Operation by Exploit Immune System's Properties. In: 2nd International Conference on Computer Engineering and Mathematical Sciences (ICCEMS2013), 5-6 December 2013, Kuala Lumpur, Malaysia.

Jaya, A. S. M. and Hashim, S.Z.M. and Haron, H. and Ngah, Razali and Muhamad, M.R. and Rahman, M. N. A. (2013) Modeling of ANFIS in predicting TiN coatings roughness. In: 5th International Conference on Computer Science and Information Technology (CSIT), 2013 , 27-28 March 2013, Amman.

Kasim, Mohd Shahir (2013) Comparison between Taguchi Method and Response Surface Methodology (RSM) In Optimizing Machining Condition. In: UNSPECIFIED.

Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Md. Ali, Mohd Amran and Abdul Aziz, Mohd Sanusi and Mohamad, Noraiham and Raja, Izamshah (2013) Prediction of Cutting Force in End Milling of Inconel 718. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET), 3-4 December 2013, Kuantan, Pahang. (Submitted)

Kasim, Mohd Shahir and Sulaiman, Mohd Amri and RAJA ABDULLAH, RAJA IZAMSHAH (2013) Assessment of environmental friendly application of biodegradable MQL coolant in end milling of Inconel 718. In: 16th Conference of the European Roundtable on Sustainable Consumption and Production (ERSCP), 4-7 June 2013, Istanbul, Turki.

Minhat, Mohamad (2013) CNC Machine System Via STEP-NC Data Model and Lab VIEW Platform for Milling Operation. In: 2013 IEEE Conference on Open Systems (ICOS), December 2-4, 2013, Sarawak, Malaysia.

Minhat, Mohamad (2013) ADVANCED MANUFACTURING: TECHNOLOGY REVIEW ON THE FABRICATION OF AN AIRCRAFT COMPONENT (FISH-HEAD). In: National Conference on Engineering Technology 2013, 1 - 2 July 2013, Shah Alam Convention Centre (SACC, 1 - 2 July 2013, Shah Alam Convention Centre (SACC). (In Press)

Mohamed, Saiful Bahri and Abbas, Adnan Jameel and Minhat, Mohamad (2013) A Review on Intelligence STEP-NC Data Model and Function Blocks CNC Machining Protocol. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC 2013), December 4-6, 2013, Johor Bahru, Malaysia.

Mohd , amran and Salmah, Siti and Hussein, Nur Izan Syahriah and Raja, Izamshah and Mohd , Hadzley and Sivarao, Subramonian and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2013) Effects of Machine Parameters on Surface Roughness Using Response Surface Method in Drilling Process. In: Malaysian International Tribology Conference , November 18-20, 2013, Kota Kinabalu, Sabah, Malaysia.

Mohd , amran and Salmah, Siti and Zaki, M and Raja, Izamshah and Mohd , Hadzley and Sivarao, Subramonian and Mohd Shahir, Kasim and Mohd Amri , Sulaiman (2013) Study the effects of pressure on warpage of dumbbell plastics part in injection moulding machine. In: International Manufacturing Engineering Conference (iMEC 2013), 1-3 July 2013, Gambang, Kuantan, Pahang, Malaysia.

Sivarao, Subramonian and Aziz, Alif and Hambali, A and Salleh, Mohd Rizal and T.J.S, Anand and Raja, Izamshah and Nur, izan and A.R.M, Warikh (2013) SUPER ENERGY SAVING LOCKING SYSTEM (SES- LOCK). In: Program Pemindahan Ilmu (KTP01), 21 Ogos, Bangi Malaysia.

Sivarao, Subramonian and Dimin @ Mohd Amin, Mohd Fairuz and Faris N. M. F. and Arep @ Ariff, Hambali and Dhar Malingam, Sivakumar and Salit, Mohd Sapuan (2013) Analytical hierarchy process for design selection of micro hot-marking tool. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material, 30-31 October 2013, Melaka, Malaysia.

Sivarao, Subramonian and Qumrul, Ahsan and Mohd Amran, Md Ali and T.J.S, Anand and RAJA ABDULLAH, RAJA IZAMSHAH and Aziz, Alif (2013) Friction Performonce Anolysis of woste Tire Rubber Powder Reinforced polypropylene using pin-on-Disk Tribometer. In: Malaysian International Tribology Conference ( MITC), November 18-20, Kota Kinabalu, Sabah.

Zahra , Hosseini and Hamed , Fazlollahtabar and Iraj , Mahdavi and Minhat, Mohamad (2013) A Mathematical Model for Waste Management in Reverse Supply Chain. In: Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management, January 7 – 9, 2014, Bali, Indonesia. (Submitted)

Book

Abd Rahman, Ammar and Subramonian, Sivarao and Minhat, Mohamad and Abd. Rahman, Md. Nizam and Salleh, Mohd Rizal (2013) Manufacturing Process Volume 1. Penerbit Universiti UTeM.