Items where Author is "Abdollah, Mohd Fadzli bin"
 | Up a level |
Article
Abdollah, Mohd Fadzli bin and KAZIM, MUHAMMAD NUR AKMAL and Amiruddin, Hilmi and Ramli, Faiz Redza (2022) Surface quality and absorption properties of Polymeric Composite (PLA-PCU) fabricated using 3D printing for articular cartilage application. JURNAL TRIBOLOGI, 35. pp. 167-185. ISSN 2289-7232
Abdullah, Muhammad Ilman Hakimi Chua and Omar, Mohammad Rafi and Alkahari, Mohd Rizal and Abdullah, Rohana and Abdollah, Mohd Fadzli bin and Subramaniam, Mahananthan and Ibramsa, Rizwana Seeni (2022) Effect of polyamide-12 material compositions on mechanical properties and surface morphology of SLS 3D printed part. Journal of Mechanical Engineering, 19 (1). pp. 57-70. ISSN 1823-5514
Mohan, Sanjay and Abdollah, Mohd Fadzli bin and Ul Haq, Mir Irfan and Raina, Ankush (2021) Potential Of AA7075 As A Tribological Material For Industrial Applications - A Review. Indian Journal of Pure and Applied Physics, 59 (3). pp. 197-201. ISSN 0019-5596
Abdullah, Muhammad Ilman Hakimi Chua and Mohamad Norani, Mohamad Nordin and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Ramli, Faiz Redza and Tamaldin, Noreffendy (2020) Tribological Analysis Of A 3D-Printed Internal Triangular Flip ABS Pin During Running-In Stage. Jurnal Tribologi, 27. pp. 42-56. ISSN 2289-7232
Sudrajat, Ajat and Tamaldin, Noreffendy and Mat Yamin, Ahmad Kamal and Abdollah, Mohd Fadzli bin and Zakaria, Mohd Hafidz and Nyirenda, Gomezgani (2020) Performance Analysis Of Biodiesel Engine By Addition Of Hho Gas As A Secondary Fuel. Jurnal Tribologi, 26. pp. 120-134. ISSN 2289-7232
Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Ramli, Faiz Redza and Tamaldin, Noreffendy and Mohamad Norani, Mohamad Nordin and Abdullah, Muhammad Ilman Hakimi Chua (2020) Synergistic Effect Of Loads And Speeds On The Dry Sliding Behaviour Of Fused Filament Fabrication 3D-Printed Acrylonitrile Butadiene Styrene Pins With Different Internal Geometries. International Journal of Advanced Manufacturing Technology, 108. pp. 2525-2539. ISSN 0268-3768
Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Mohamad Nizar, Muhamad Aliff Danial (2020) Measurement Of Roller Chain Wear Lubricated With Palm Oil-Based Hexagonal Boron Nitride Nanoparticles. Industrial Lubrication And Tribology, 72 (10). pp. 1199-1204. ISSN 0036-8792
Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Mohamad Zin, Mohd Rody and Tamaldin, Noreffendy (2020) Effect Of Hydrogen On Graphene Growth From Solid Waste Products By Chemical Vapour Deposition: Friction Coefficient Properties. Industrial Lubrication And Tribology, 72 (2). pp. 181-188. ISSN 0036-8792
Abdollah, Mohd Fadzli bin and Jamallulil, Arina Dayana and Hilmi, Amiruddin (2020) Experimental Analysis Of Tribological Performance Of Palm Oil Blended With Hexagonal Boron Nitride Nanoparticles As An Environment-Friendly Lubricant. International Journal of Advanced Manufacturing Technology, 106. pp. 4183-4191. ISSN 0268-3768
Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Tamaldin, Noreffendy and Amiruddin, Hilmi and Mohamad Zin, Mohd Rody and Kamis, Shahira Liza (2020) Tribological Performance Of The Graphene Synthesized From Fruit Cover Plastic Waste And Oil Palm Fiber Using A CVD Method. Industrial Lubrication and Tribology, 72 (6). pp. 771-777. ISSN 0036-8792
Md Alias, Muhammad Aizat and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi (2019) Lubricant And Tribological Properties Of Zinc Compound In Palm Oil. Industrial Lubrication and Tribology, 71 (10). pp. 1177-1185. ISSN 0036-8792
Ghazali, Mariyam Jameelah and Yusuf, Yusliza and Abdollah, Mohd Fadzli bin and Otsuka, Yuichi and Morakul, Sarita and Nakamura, Susumu and Ohnuma, Kiyoshi (2019) Wettability characteristics of laser surface textured plasma sprayed TiO2/ZnO coatings. Tribology Online, 14 (5). pp. 279-284. ISSN 1881-2198
Abdullah, Muhammad Ilman Hakimi Chua and Othman, Aimanezmir and Abdullah, Rohana and Abdollah, Mohd Fadzli bin (2019) Optimization On The Nanoparticles Stability In Liquid Phased Condition By Using Taguchi Analysis. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (1). pp. 129-139. ISSN 2289-7879
Abdollah, Mohd Fadzli bin and Ibrahim, Maziah and Amiruddin, Hilmi (2019) Friction Reduction Of Palm Kernel Activated Carbon Polymer Composite By Lubricant Impregnation. Tribology Online, 14 (5). pp. 411-416. ISSN 1881-2198
Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Tamaldin, Noreffendy and Amiruddin, Hilmi and Mohamad Zin, Mohd Rody (2019) Graphene Coatings Technology On Tribology Perspective. International Journal of Recent Technology and Engineering (IJRTE), 8 (1S5). pp. 33-37. ISSN 2277-3878
Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Norashid, Norjannahtul Ainah (2019) Comparative Study Of The Tribological Behaviour Of 3D-Printed And Moulded ABS Under Lubricated Condition. Materials Research Express, 6 (8). pp. 1-7. ISSN 2053-1591
Amiruddin, Hilmi and Abdollah, Mohd Fadzli bin and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Abu Mansor, Mohd Radzi and Mamat, Rizalman and Alias, Azri (2017) Effect of Vaned Diffuser on the Performance of Small Turbocharger. Journal of Mechanical Engineering, SI 1 (1). pp. 227-236. ISSN 1823-5514
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid and Saleman, Abdul Rafeq (2017) The hBN Nanoparticles as an Effective Engine Oil Additive to Enhance the Durability and Performance of a Small Diesel Engine. Journal of Mechanical Engineering, SI 1 (1). pp. 103-112. ISSN 1823-5514
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2017) Tribological effects of nano-based engine oil diluted with biodiesel fuel. International Journal of Surface and Engineering, 11 (1). pp. 12-22. ISSN 1749-785X
Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi (2016) When should i change my tire? CARe Newsletter. p. 5. ISSN 2289-9871
Abdollah, Mohd Fadzli bin (2016) Tribology in Malaysia: General perspective. TTA E-Magazine. pp. 6-10. ISSN 228-1732
Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2016) The effect of sliding distance at different temperatures on the tribological properties of a palm kernel activated carbon–epoxy composite. Tribology International, 94. pp. 352-359. ISSN 0301-679X
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2016) The potential of hBN nanoparticles as friction modifier and antiwear additive in engine oil. Mechanics & Industry, 17 (1). pp. 1-6. ISSN 2257-7777
Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2016) The Effect Of Sliding Distance At Different Temperatures On The Tribological Properties Of A Palm Kernel Activated Carbon-Epoxy Composite. Tribology International, 94 (-). pp. 352-359. ISSN 0301-679X
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and tamaldin, noreffendy and Amiruddin, Hilmi and Mat Nuri, Nur Rashid (2016) Effect of hexagonal boron nitride nanoparticles as an additive on the extreme pressure properties of engine oil. Industrial Lubrication And Tribology, 68 (4). pp. 441-445. ISSN 0036-8792
Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2015) The effect of temperature on the tribological properties of palm kernel activated carbonepoxy composite. Tribology Online, 10 (6). pp. 428-433. ISSN 1881-2198
Mustafa, Ashafi'e and Abdollah, Mohd Fadzli bin and Shuhimi, Fairuz Fazillah and Ismail, N. and Amiruddin, Hilmi and Umehara, Noritsugu (2015) Selection and verification of kenaf fibres as an alternative friction material using weighted decision matrix method. Materials and Design, 67. pp. 577-582. ISSN 0261-3069
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid and Hassan, Masjuki and Saleman, Abdul Rafeq (2014) Improving Engine Oil Properties by Dispersion of hBN/Al2O3 Nanoparticles. Applied Mechanics and Materials. pp. 70-73. ISSN 1660-9336
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Mat Nuri, Nur Rashid and tamaldin, noreffendy and Hassan, Masjuki and Saleman, Abdul Rafeq (2014) Effect of hBN/Al2O3 nanoparticles on engine oil properties. Energy Education Science and Technology Part A: Energy Science and Research. pp. 3261-3268. ISSN 1308-772X
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2014) Effect of hBN/Al2O3 Nanoparticle Additives on the Tribological Performance of Engine Oil. Jurnal Teknologi , 66 (3). pp. 1-6. ISSN 2180-3722
Mohamad, Noraiham and Zainol, Nur Sharafina and Rahim, Faisal Faris and Mohd Salleh, Mohd Khuzaimi and Azam, Mohd Asyadi and YAAKOB, MOHD YUHAZRI and Abd Manaf, Mohd Edeerozey and Ab Maulod, Hairul Effendy and Abdollah, Mohd Fadzli bin (2014) Interaction of Mixing Factors with Mechanical Properties of PP/ENR Blend via Response Surface Methodology. Journal of Mechanical Engineering, 11 (1). pp. 1-13. ISSN 1823-5514
Mustafa, Ashafi'e and Abdollah, Mohd Fadzli bin and Ismail, Nurhidayah and Amiruddin, Hilmi and Noritsugu, Umehara (2014) Materials Selection for Eco-Aware Lightweight Friction Material. Mechanics & Industry. pp. 279-285. ISSN 2257-7777
Hanafi, M.H.M and Wan Mahmood, W.M.F and Abdollah, Mohd Fadzli bin and Saleman, Abdul Rafeq and Nor, N.F.M and Zulfattah, Z. M. and Shamsudin, S.A and Ibrahim, A. (2013) Comparison of Soot Particle Movement based on Crank Angle. Procedia Engineering , 68. pp. 245-250. ISSN 1877-7058
tamaldin, noreffendy and Mat Yamin, Ahmad Kamal and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and ABDULLAH, Mohd Azman (2013) Design Optimization of Thermal Management System for Electric Vehicle Utilizing CFD Analysis, DFMEA and CES. Procedia Engineering , 68. pp. 305-312. ISSN 1877-7058
Zakaria, Nazri Huzaimi and Mohamad Zin, Mohd Rody and Abdollah, Mohd Fadzli bin and Saleman, Abdul Rafeq and Amiruddin, Hilmi and tamaldin, noreffendy (2013) Elastohydrodynamics Lubrication for Bio-Based Lubricants in Elliptical Conjunction. Procedia Engineering , 68. pp. 123-129. ISSN 1877-7058
Abdollah, Mohd Fadzli bin and Mazlan, Mohd Afiq Azfar and Amiruddin, Hilmi and tamaldin, noreffendy (2013) Frictional Behavior of Bearing Material Under Gas Lubricated Conditions. Procedia Engineering , 68. pp. 688-693. ISSN 1877-7058
Mohamad, Noraiham and Zainol, Nur Sharafina and Rahim, Faisal Faris and Ab Maulod, Hairul Effendy and Abd Rahim, Toibah and Shamsuri, Siti Rahmah and Mohd Abid, Mohd Asyadi Azam and Abdollah, Mohd Fadzli bin and Abd Manaf, Mohd Edeerozey (2013) Mechanical and Morphological Properties of Polypropylene/Epoxidized Natural Rubber Blends at Various Mixing Ratio. Procedia Engineering , 68. pp. 439-445. ISSN 1877-7058
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2013) Optimization of Tribological Performance of hBN/AL2O3 Nanoparticles as Engine Oil Additives. Procedia Engineering , 68. pp. 313-319. ISSN 1877-7058
Saleman, Abdul Rafeq and Zulfattah, Z. M. and Najib, M. Ali and Rody, M. Z. M and Fadhli, Syahrial and Abdollah, Mohd Fadzli bin and Hanafi, M.H.M (2013) Preliminary Study of CST in Malaysia based on Field Optical Efficiency. Procedia Engineering , 68. pp. 238-244. ISSN 1877-7058
Abdollah, Mohd Fadzli bin (2013) Preliminary Design of Side Door Impact Beam for Passenger Cars using Aluminium Alloy. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 5 (1). pp. 11-18. ISSN 2180-1053
Abdollah, Mohd Fadzli bin (2012) Future developments of a deformation-wear transition map of DLC coating. Tribology Online, 7 (3). pp. 107-111. ISSN 1881-2198
Abdollah, Mohd Fadzli bin (2012) Deformation–wear transition map of DLC coating under cyclic impactloading. Wear, 27 (-). pp. 435-441. ISSN 0043-1648
Abdollah, Mohd Fadzli bin (2011) The Effect of Maximum Normal Impact Load, Absorbed Energy, and Contact Impulse, on the Impact Crater Volume/Depth of DLC Coating. Tribology Online, 6 (6). pp. 257-264. ISSN 1881-2198
Abdollah, Mohd Fadzli bin (2010) Phase transformation studies on the a-C coating under repetitive impacts. Surface & Coatings Technology, 205. pp. 625-631. ISSN 0257-8972
Conference or Workshop Item
Amiruddin, Hilmi and Abdollah, Mohd Fadzli bin and Idris, A.M. and Abdullah, Muhammad Ilman Hakimi Chua and tamaldin, Noreffendy (2015) Stability of nano-oil by pH control in stationary conditions. In: Mechanical Engineering Research Day 2015, 31 March 2015, Melaka.
Abdullah, Adli Zil Ikram and Abdollah, Mohd Fadzli bin and Tee, Boon Tuan and Amiruddin, Hilmi and Mat Yamin, Ahmad Kamal and Tamaldin, Noreffendy (2015) Thermal performance of carbon-based microencapsulated phase change materials. In: Mechanical Engineering Research Day 2015, 31 March 2015, Melaka.
Amiruddin, Hilmi and Abdollah, Mohd Fadzli bin and Mazlan, Mohd Afiq Azfar and tamaldin, noreffendy (2014) Effect of Lubrication Environments on Wear Performance of Ball Bearing Materials. In: Proceedings of 41th Leeds-Lyon Symposium on Tribology 2014, 2-5 September 2014, Leeds, United Kingdom.
Abdollah, Mohd Fadzli bin and Abdullah, Muhammad Ilman Hakimi Chua and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2014) The hBN Nanoparticles as an Effective Additive in Engine Oil to Enhance the Durability and Performance of a Small Diesel Engine. In: Proceedings of 41th Leeds-Lyon Symposium on Tribology 2014, 2-5 September 2014, Leeds, United Kingdom.
Abdollah, Mohd Fadzli bin and Abdullah, Muhammad Ilman Hakimi Chua and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2014) Drive to Greener Future: Tribological and Engine Performances of Nano-Oil. In: JAST Tribology Conference, Spring 2014, 19 - 21 May 2014, Tokyo.
Ashafi'e, Mustafa and Abdollah, Mohd Fadzli bin and Ismail, Nurhidayah and Amiruddin, Hilmi and Umehara, Noritsugu (2014) Pre-Materials Selection for Eco-Aware Lightweight Friction Material. In: 9th International Materials Technology Conference and Exhibition, 13 - 16 May 2014, Kuala Lumpur.
Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2014) The Effect on Friction Coefficient and Wear Rate of Palm Kernel Activated Carbon-Epoxy (PKAC-E) Composite at Different Temperatures. In: 3rd Malaysia-Japan Tribology Symposium 2014 (MJTS2014), 12-14 November 2014, Malaysia-Japan Internation Institute of Technology (MJJIT).
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Mat Nuri, Nur Rashid (2013) Optimized Nanolubricant for Friction Reduction. In: 40th Leeds-Lyon Symposium on Tribology & Tribochemistry Forum 2013, 4 - 6 September 2013, Lyon, France.
tamaldin, noreffendy and Abdollah, Mohd Fadzli bin (2012) Proposal for hybrid passive cooling system of batteries In the electric car. In: The 3rd International Conference on Engineering and ICT 2012 (ICEI2012), 4 - 6 April 2012, Melaka.
Abdollah, Mohd Fadzli bin and tamaldin, noreffendy and Amiruddin, Hilmi and Mohd Zamberi, Mahanum and Rody, M. Z. M and Mat Kamal, Sushella Edayu (2012) Tribology-Related Researches at Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka (UTeM). In: Malaysia-Japan Tribology Meeting 2012, 27-28 August 2012, Kuala Lumpur.
Abdollah, Mohd Fadzli bin and Yamaguchi, Y. and Akao, T. and Inayoshi, N. and Miyamoto , N. and Tokoroyama, Takayuki and Umehara, Noritsugu (2011) Deformation and wear map of DLC coating under cyclic impacts. In: International Tribology Conference 2011, 30 October 2011 - 3 November 2011, Hiroshima.
Abdollah, Mohd Fadzli bin and Yamaguchi, Y. and Akao, T. and Inayoshi, N. and Umehara, Noritsugu and Tokoroyama, Takayuki (2010) Raman Spectroscopy Study of Impacted DLC Coatings. In: Interatioal Tribology Congress - ASIATRIB 2010, 5-9 December 2010, Perth, Australia.
Abdollah, Mohd Fadzli bin and Yamaguchi, Yuto and Akao, T. and Inayoshi, N. and Tokoroyama, Takayuki and Umehara, Noritsugu (2010) The effect of maximum normal impact load, absorbed energy and contact impulse on the impact craters volume/depth of DLC coating under repetitive impacts. In: JAST Tribology Conference 2010, 14-17 September 2010, Fukui, Japan.