Items where Author is "Akop, Mohd Zaid"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 24.

Article

Omar, Ghazali and Hamzah, Afiqah and Akop, Mohd Zaid and Zakaria, Mohd Hafidz and Rosli, Nur Natasha Atikah (2022) Deposit formation in the injector of a diesel engine fueled with higher blended palm biodiesel. Jurnal Tribologi, 33. pp. 97-112. ISSN 2289-7232

Salim, Mohd Azli and Ab Wahid, Ameeruz Kamal and Masripan, Nor Azmmi and Md. Saad, Adzni and Akop, Mohd Zaid and Feng, Dai (2022) Analyse of strain and stress on different stretchable conductive ink materials by numerical method. International Journal of Nanoelectronics and Materials, 15 (SI). pp. 429-440. ISSN 1985-5761

Akop, Mohd Zaid and Jikol, Favian and Salim, Mohd Azli and Mohamed Arifin, Yusmady and Herawan, Safarudin Gazali (2022) Biofuel development in Malaysia: Challenges and future prospects of palm oil biofuel. International Journal of Nanoelectronics and Materials, 15 (SI). pp. 159-181. ISSN 1985-5761

Akop, Mohd Zaid and Shehab, Salem Saleh Omar and Masripan, Nor Azmmi and Abdul Hamid, Nurfaizey and Wasbari, Faizil and Md. Saad, Adzni and Mansor, Muhd Ridzuan and Noordin, Aminurrashid and Herawan, Safarudin Gazali (2022) Effect of light intensity on indoor temperature and air velocity: A simulation study. International Journal of Nanoelectronics and Materials, 15 (SI). pp. 415-427. ISSN 1985-5761

Salim, Mohd Azli and Ab Wahid, Ameeruz Kamal and Masripan, Nor Azmmi and Photong, Chonlatee and Md. Saad, Adzni and Akop, Mohd Zaid (2022) Transient thermal simulation analysis of die-attach adhesives. International Journal of Nanoelectronics and Materials, 15 (SI). pp. 505-522. ISSN 1985-5761

Abdul Hamid, Nurfaizey and Akop, Mohd Zaid and Masripan, Nor Azmmi and Wasbari, Faizil and Abdul Munajat, Nurain and Mohamad Wazir, Azmil Arif and Jaafar, Juhana and Othman, ‎Mohd Hafiz Dzarfan and Tucker, Nick (2021) Determination of optimal electrospinning distance and applied voltage for polyacrylonitrile electrospun fibre production. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 201-212. ISSN 1985-5761

Masripan, Nor Azmmi and Salim, Mohd Azli and Lin, Soong Jin and Mansor, Muhd Ridzuan and Akop, Mohd Zaid and Abdul Hamid, Nurfaizey and Wasbari, Faizil and Noordin, Aminurrashid (2021) Effect Of Stretchable Conductive Ink (SCI) On Electrical Conductivity Under Tensile Stress. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 429-437. ISSN 1985-5761

Salim, Mohd Azli and Md. Saad, Adzni and Ahmad, Fauzi and Akop, Mohd Zaid and Al-Mola, Mohammed Hussin A. and Saad, Hartini (2021) Effect of the different printing patterns of graphene nanoparticles in conductive ink on electrical and mechanical performance. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 225-240. ISSN 1985-5761

Salim, Mohd Azli and Md. Saad, Adzni and Akop, Mohd Zaid and Photong, Chonlatee and Md. Zain, Mohd Zarhamdy and Abu Bakar, Abd Rahim and Mohd Yusof, Norbazlan (2021) Modelling and estimation on vibration and noise level of the dynamic wiper system using input shaping strategy. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 311-332. ISSN 1985-5761

Akop, Mohd Zaid and Lai, Tian Wei and Salim, Mohd Azli and Mohd Rosli, Mohd Afzanizam and Abdul Hamid, Nurfaizey and Mansor, Muhd Ridzuan and Md. Saad, Adzni and Mohamed Arifin, Yusmady and Herawan, Safarudin Gazali (2021) A Simulation Study On Performance Of Photovoltaic Thermal Water (PVTW) Collector Under Different Loading Of Mass Flow Rate Using ANSYS Fluent. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 467-478. ISSN 1985-5761

Akop, Mohd Zaid and Shehab, Salem Saleh Omar and Mohamed Arifin, Yusmady and Salim, Mohd Azli and Masripan, Nor Azmmi and Abdul Hamid, Nurfaizey and Wasbari, Faizil and Md. Saad, Adzni and Herawan, Safarudin Gazali (2021) An experimental study on effect of light intensity to indoor air temperature and humidity. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 457-466. ISSN 1985-5761

Akop, Mohd Zaid and Jikol, Favian and Salim, Mohd Azli and Mohamed Arifin, Yusmady (2021) A study of steady-state thermal distribution on circular plate using ANSYS. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 479-488. ISSN 1985-5761

Mansor, Muhd Ridzuan and Omar, Ghazali and Tamaldin, Noreffendy and Abdul Hamid, Nurfaizey and Md. Saad, Adzni and Arshad, M. A. and Akop, Mohd Zaid and Salim, Mohd Azli and Masripan, Nor Azmmi and Majid, M. H.A. and Maamor, M. A. H. M. and Herawan, S. G. and Solah, M. S. (2021) Implementation Of Dark And Raining Environmental Conditions To Investigate Lane Support System Performance For Passenger Cars In Southeast Asia: Case Study For Malaysian Domestic Road. International Review of Mechanical Engineering, 15 (1). pp. 51-58. ISSN 1970-8734 (In Press)

Mohd Saat, Fatimah Al Zahrah and Sukri, Mohamad Firdaus and Shikh Anuar, Fadhilah and Akop, Mohd Zaid and Lin, Chou Aw and Abdul Manan, Zainuddin (2021) Heat Transfer Across Tube Banks With A Passive Control Vortex Generator In Steady One-Directional And Oscillatory Flows. CFD Letters, 13 (1). pp. 1-18. ISSN 2180-1363

Salim, Mohd Azli and Omar, Ghazali and Md. Saad, Adzni and Masripan, Nor Azmmi and Akop, Mohd Zaid and Dai, Feng and Dmitriev, Andrey N. and Naroh, Azmi (2020) Prediction effects on internal resonance wave of metallic conductive ink in rotational motion behaviour. International Journal of Nanoelectronics and Materials, 13 (SI). pp. 295-304. ISSN 1985-5761

Abdul Hamid, Nurfaizey and Akop, Mohd Zaid and Mohd Rosli, Mohd Afzanizam and Salim, Mohd Azli and Masripan, Nor Azmmi (2020) Controlled Deposition Of Electrospun Nanofibres Using Active Time-Varying Secondary Electrodes. World Journal of Engineering and Technology, 17 (1). pp. 52-59. ISSN 1708-5284

Yusmady, Mohamed Arifin and Shamsudin, Shamsul Anuar and Mokhtar, Muhammad Zhafri and Syahrial, Fadhli and Akop, Mohd Zaid and Herawan, Safarudin Gazali (2019) The Effect Of Diesel And Bio-Diesel Fuel Deposit Layers On Heat Transfer. Journal of Advanced Manufacturing Technology (JAMT), 13 (2). pp. 1-14. ISSN 1985-3157

Sheikh Md Fadzullah, Siti Hajar and Nasaruddin, Muhamad Muaz and Kamalrudin, Massila and Ramli, Mizah and Mohamad, Imran Syakir and Omar, Ghazali and Akop, Mohd Zaid (2019) The Effect Of Aspect Ratio On Multi-Walled Carbon Nanotubes Filled Epoxy Composite As Electrically Conductive Adhesive. Journal of Advanced Manufacturing Technology (JAMT), 13 (1). pp. 133-144. ISSN 1985-3157

Misha, Suhaimi and Ahmed Al-Qadhi, Ahmed Abdullah and Mohd Rosli, Mohd Afzanizam and Akop, Mohd Zaid (2017) Design And Simulation Of An Optimized Mixed Mode Solar Dryer Integrated With Desiccant Material. International Journal of Mechanical & Mechatronics Engineering , 17. pp. 65-73. ISSN 2077-124X (online) 2227-2771 (Print)

Mohamed Arifin, Yusmady and Akop, Mohd Zaid and Lai, Tak Oon and Ewe, Tek Bee and Tee, Boon Tuan and Shamsudin, Shamsul Anuar (2015) A study of double-layered wall and prism deflector to improve natural ventilation in a confined space. Journal Of Advanced Manufacturing Technology (JAMT) , 9 (2). pp. 75-88. ISSN 1985-3157

Salim, Mohd Azli and Noordin, Aminurrashid and Akop, Mohd Zaid (2011) Development of a Free-Free Transverse Beam Model Using Lateral Vibrations of Beam Conventional Method during Seismic Activity. Journal of Mathematics Research, 3 (3). pp. 77-82. ISSN 1916-9795

Mohd Afzanizam, Mohd Rosli and Akop, Mohd Zaid and Mansor, Muhd Ridzuan and Sivarao, Subramonian (2011) Development of a Stand-alone Solar Powered Bus Stop. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 3 (2). pp. 55-66. ISSN 2180-1053

Book Chapter

Mansor, Muhd Ridzuan and Akop, Mohd Zaid and Sapuan, S.M. and Mohd Tahir, Musthafah and Salim, Mohd Azli and Shaharuzaman, Mohd Adrinata (2006) Concurrent Design Of Green Composites. In: Green Approaches To Biocomposite Materials Science And Engineering. IGI Global, pp. 48-51. ISBN 9781522504245

Conference or Workshop Item

Ashari, Muhamad Hafizullah and Mansor, Muhd Ridzuan and Mohd Rosli, Mohd Afzanizam and Akop, Mohd Zaid and Salim, Mohd Azli and Shaharuzaman, Mohd Adrinata (2012) Design Of Space Frame Chassis For UTeM Formula Varsity Race Car. In: 3rd International Conference on Engineering & ICT (ICEI2012) , 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)

This list was generated on Fri Mar 29 22:42:09 2024 +08.