Items where Division is "Faculty of Manufacturing Engineering" and Year is 2014

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | H | M | P | R | S
Number of items: 15.

A

Abd Razak, Jeefferie and Ahmad, Sahrim and Ratnam, Chantara Thevy and Yaakub, Juliana and Mohd Abid, Mohd Asyadi Azam and Zainal Abidin, Muhammad Zaimi and Abd Manaf, Mohd Edeerozey and Mohamad, Noraiham (2014) Facile Surface Modification Of Graphene Nanoplatelets (GNPS) Using Covalent ATPS-Dehydration (GNPS-ATPS) And Non-Covalent Polyetherimide Adsorption (GNPS-PEI) Method. APPLIED MECHANICS AND MATERIALS, 761 (-). pp. 391-396. ISSN -

Abd Razak, Jeefferie and Haji Ahmad, Sahrim and Ratnam Dr, Chantara Thevy A/P and Mahamood, Mazlin Aida and Lau, Kok Tee and Ab Maulod, Hairul Effendy and Munawar, Rose Farahiyan and Mohamad, Noraiham (2014) Non-Covalent Polymeric Wrapping Of Igepal C0890 Fo Graphene Nanoplatelets (Gnps-C0890) Filled Nr/Epdm Rubber Blend Nanocomposites. Applied Mechanics and Materials, 761. pp. 385-390. ISSN 1660-9336

Azizah Shaaban (2014) Nitrogeneous compound fertilizer. PI 2014703289.

H

Halim, Isa and Omar, Noor Rawaida and Kamat, Seri Rahayu and Abdullah, Rohana and Saptari, Adi and Othman, Mohd Shahrizan (2014) Analysis Of Muscle Activity Using Surface Electromyography For Muscle Performance In Manual Lifting Task. Applied Mechanics and Materials, 564. pp. 644-649. ISSN 1660-9336

M

Md Ali, Mohd Amran and Raja Abdullah, Raja Izamshah and Hussein, Nur Izan Syahriah and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Salleh, Mohd Rizal and Mohamad, Effendi and Subramonian, Sivarao and Liew, Pay Jun and Abdullah, Zulkeflee (2014) Performance of wire-EDM parameters on machining characteristics of titanium alloy (Ti6Al4V) using Taguchi method. In: Malaysia University Conference Engineering Technology 2015, 10-11 November 2014, Melaka.

Mohamad, Effendi and T., Ito and D., Yuniawan and Ibrahim, Mohamad Amran and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad and Md Ali, Mohd Amran (2014) A Proposal Of Muda Indicator Agent To Estimate Lean Manufacturing Verification. Journal Of Advanced Manufacturing Technology, 8 (2). pp. 71-82. ISSN 1985-3157

Mohd Amran, Md Ali and Mohd Faizal, Khalik (2014) Effect of injection moulding process parameters on plastic part quality in transparent glass mould. In: International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), 15 and 16 October 2014, PPS UTeM .

P

Puvanasvaran, A. Perumal and Al Amin, Mohamed Sultan and Mohd Syaiful Rizal, Abdul Hamid and Norazlin, Nasir (2014) Exploratory The Transitional Impact From Lean Production To Open Source. Science International (Lahore), 26 (5). pp. 1697-1702. ISSN 1013-5316

Puvanasvaran, A. Perumal and Suresh, Vasu and Norazlin, Nasir (2014) Lean Environmental Management Integration System (LEMIS) Framework Development. International Journal Of Social, Management, Economics And Business Engineering, 8 (12). pp. 3575-3582. ISSN -

Puvanasvaran, A. Perumal and Yee, Hui Hui and Norazlin, Nasir (2014) Managing Waste Elimination Database In Lean Manufacturing: Improve Problem Solving Capability. American Journal Of Engineering And Applied Sciences, 7 (2). pp. 271-281. ISSN 1941-7020

R

Roni Sahroni, Taufik and Kamaruddin, Mohammad Aizrulshah and Kasim, Mohd Shahir and Md Ali, Mohd Amran and Mohamad, Effendi and Ito, Teruaki (2014) Design and optimization of runner and gating systems for permanent mould casting. In: 24th Design Engineering Systems Division JSME Conference Japan Society of Mechanical Engineers, 17-19th September, JSME Conference Japan Society of Mechanical Engineers, .

S

Salleh, Mohd Shukor and Mohammed, M.N. and Omar, Mohd Zaidi and Syarif, Junaidi (2014) Morphological Evolution During Partial Re-Melting Of AISI D2 Cold-Work Tool Steel. Sains Malaysiana, 43 (8). pp. 1213-1219. ISSN 0126-6039

Saptari, Adi and Poh, Kiat Ng (2014) A Review Of Shape And Size Considerations In Pinch Grips. Theoretical Issues in Ergonomics Science, 15 (3). pp. 305-317. ISSN 1463-922X

Sulaiman, M. Yusoff and Abdullah, Abu and Othman, Norfaridatul Akmaliah (2014) Malaysian Innovation Ecosystem : A Review Of The Literature. Journal of Advanced Manufacturing Technology (JAMT) , 8 (1). pp. 139-141. ISSN 1985-3157

Suraya, Laily and Mohd Amran, Md Ali and Nur Izan Syahriah, Hussein and Muhamad, Mohd Razali and RAJA ABDULLAH, RAJA IZAMSHAH and Taufik, Roni Sahroni (2014) The effect of EDM die-sinking parameters on surface integrity for aluminium composite using copper electrode. In: International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), 15 and 16 October 2014, PPS UTeM .

This list was generated on Fri Mar 29 23:07:08 2024 +08.