Interactive buckling tests on steel cones subjected to axial compression and external pressure - a comparison of experimental data and design codes

Ifayefunmi, Olawale (2013) Interactive buckling tests on steel cones subjected to axial compression and external pressure - a comparison of experimental data and design codes. Ships and Offshore Structures. pp. 1-11. ISSN 1744-5302 (In Press)

WarningThere is a more recent version of this item available.
[img]
Preview
 PDF
Interactive_buckling_tests_on_steel_cones_subjected_to_axial_compression_and_external_pressure_-_a_comparison_of_experimental_data_and_design_codes.pdf
Download (951kB)

Abstract

The plastic buckling of thick steel conical shells subjected to combined action of axial compression and external pressure is of considerable interest in the offshore and the nuclear industries. However, design information on this subject area is limited. At present, only the ASME B&PV code case 2286-2 provides design information for cones subjected to axial and hoop compressions acting simultaneously. This design rule has not been validated both experimentally and numerically, especially in the elastic–plastic region. Past results on interactive buckling tests carried out at the University of Liverpool, Liverpool, UK on 13 computer numerically controlled (CNC)-machined cones having r2/r1 = 2.02, r2/t = 34.3, h/r2 = 1.01, and β = 26.56◦ were compared with predictions of design loads obtained from ASME code case 2286-2. This was done in order to check the applicability of this design rule and suggest a safe operating region. The paper consider the general procedure adopted by the ASME case code 2286-2 to predict the interactive buckling curve and identifies some discrepancies in the predictions. It further suggests region of safe operational design level. Combined stability plots for the master cone and equivalent cylinder have also been derived. Results of this study show that ‘the equivalent cylinders’ do not represent a safe design substitute for a relatively thick cone under combined loading.

Item Type: Article
Subjects: T Technology > TC Hydraulic engineering. Ocean engineering
Divisions: Faculty of Engineering Technology > Department of Mechanical Engineering Technology
Depositing User: Dr. Olawale Friday Ifayefunmi
Date Deposited: 19 Mar 2014 02:00
Last Modified: 28 May 2015 04:20
URI: http://eprints.utem.edu.my/id/eprint/11828
Statistic Details: View Download Statistic

Available Versions of this Item

Actions (login required)

View Item View Item