The Effect of EDM Die-Sinking Parameters on Material Characteristic for Aluminium Composite Using Tungsten Copper Electrode

Md Ali, Mohd Amran and Laily, Suraya and Nor, Halida Ilyani Kamarudin and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Bukhari and Lajis, Mohd Amri and Raja Izamshah , Raja Abdullah and Abu Bakar, Mohd Hadzley and Taufik, Roni Sahroni (2014) The Effect of EDM Die-Sinking Parameters on Material Characteristic for Aluminium Composite Using Tungsten Copper Electrode. Applied Mechanics and Materials, 465-466. pp. 1214-1218. ISSN 1662-7482

[img] PDF
The_Effect_of_EDM_Die-sinking_Parameters_on_Material_Charac._for_Alu._LM6__Using_Tungsten_Copper_Electrode..Taguchi_method.pdf - Published Version
Restricted to Registered users only

Download (377kB) | Request a copy

Abstract

The machining ability of electrical discharge machining (EDM) die-sinking on aluminium LM6 (Al-Sil2) as a new material is investigated.The objective of this paper is to determine the relationship between the machining parameters which are pulse-on time, pulse-off time and peak current on the material characteristics such as material removal rate (MRR), electrode wear rate (EWR) and surface roughness (Ra). Tungsten copper tool of diameter 10mm was chosen as an electrode. Design of experiment using Taguchi method was used to develop experimental matrix and optimize the MRR, EWR and Ra. The analysis was done using the Minitab software. It is found that the current and pulse on time are significantly affected the MRR, EWR and Ra while pulse off time and voltage are less significant factor that affected the responses. From the Taguchi method, the best setting of optimum value was obtained. Thus, it shows that Taguchi method is the best quality tools that can be applied for production.

Item Type: Article
Subjects: T Technology > TJ Mechanical engineering and machinery
T Technology > TS Manufactures
Divisions: Faculty of Manufacturing Engineering > Department of Manufacturing Process
Depositing User: Dr. Mohd Amran Md Ali
Date Deposited: 30 Nov 2014 10:33
Last Modified: 28 May 2015 04:34
URI: http://eprints.utem.edu.my/id/eprint/13844
Statistic Details: View Download Statistic

Actions (login required)

View Item View Item