Browse By Repository:

 
 
 
   

Items where Subject is "T Technology > TS Manufactures"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type
Jump to: | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | V | W | Y | Z
Number of items at this level: 1648.

Mohd. Rizhuan , Othman (2007) Design For Die Casting (Spanner). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leong, Yong Lim (2015) Design And Development Of Sustainable Filament Extruder For 3D Printer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Noraiham and Zohid, M. A. and Karim, K. I. and Mazliah, M. and Abd Razak, Jeefferie and Lau, K. T. and Munawar, Rose Farahiyan and Ab Maulod, Hairul Effendy (2017) Lightweight And Green Tiles From Recycled Polypropylene Reinforced With Cockle-Shells Powder. Proceedings Of Innovative Research And Industrial Dialogue’16. pp. 41-42. ISSN 1819-6608

Mohd Mahathir , Mohd Daim (2007) Feasibility Study Of Product Localization: A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Amira , Zulkarnain (2013) A study on botteleneck operations to optimize manpower planning for productivity improvement at 2HC door lining assembly line via MODAPTS. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nur Sharafina, Zainol (2015) Mechanical Properties And Morphological Characterization Of Thermoplastic Elastomer Polypropylene/Epoxidised Natural Rubber Filled Reclaimed Rubber. Masters thesis, Universiti Teknikal Malaysia Melaka.

Perumal, Puvanasvaran (2013) People Development System for Lean Process Management Implementation. Penerbit UTeM, UTeM. ISBN 9789670257273

Precilla, Sylvester Sabuk (2015) The Effects Of Assembly Design Parameters On Assembly Time. Masters thesis, Universiti Teknikal Malaysia Melaka.

Raudhah , Zainal Rashid (2013) Thermal insulation particle board made with sugarcane bagasse fiber, kenaf core powder reinforced with polypropylene. Project Report. UTeM, Melaka. (Submitted)

A

A. P., Puvanasvaran and Jamibollah, N and N., Norazlin (2014) INTEGRATION OF POKA YOKE INTO PROCESS FAILURE MODE AND EFFECT ANALYSIS: A CASE STUDY. American Journal of Applied Sciences, 11 (8). pp. 1332-1342. ISSN 1546-9239

A. P., Puvanasvaran and Kerk, Swee Tian and Muhammad, Mohd Razali (2011) Sustainability Of ISO 14001 Standards Through An Integration With Lean Principles. American Journal of Applied Sciences, 8 (11). pp. 1182-1194. ISSN 1546-9239

A. P., Puvanasvaran and V. A. , Alagendran and N., Norazlin (2014) Developing Lean – EMS Integration Database for Sustaining ISO 14000 Certification. Manufacturing Science and Technology 2(2): 34-44, 2014, 2 (2). pp. 34-44. ISSN DOI: 10.13189/mst.2014.020202

A. P., Puvanasvaran and Y., Hui Hui and N., Norazlin (2014) MANAGING WASTE ELIMINATION DATABASE IN LEAN MANUFACTURING: IMPROVE PROBLEM SOLVING CAPABILITY. American Journal of Engineering and Applied Sciences, 7 (2). pp. 271-281. ISSN 1941-7020

A. P., Puvanasvaran (2013) CONSIDERATION OF DEMAND RATE IN OVERALL EQUIPMENT EFFECTIVENESS (OEE) ON EQUIPMENT WITH CONSTANT PROCESS TIME. Journal of industrial engineering and management, 6 (2). pp. 507-525. ISSN 2013-0953

A. P., Puvanasvaran (2012) Interrelationship Between Availability With Planning Factor and Mean Time Between Failures (MTBF) in Overall Equipment Effectiveness (OEE). Journal of Advanced Manufacturing Technology (JAMT) , 6 (2). pp. 29-38. ISSN 1985-3157

A. P., Puvanasvaran (2014) Lean Manufacturing: Tools & Techniques. UTeM.

A. P., Puvanasvaran (2011) PEOPLE DEVELOPMENT SYSTEM AS A PILLAR IN IMPLEMENTING LEAN FOR PUBLIC SECTOR. Journal of Human Capital Development, 3 (1). pp. 1-23. ISSN 1985-7012

A. P., Puvanasvaran (2013) WORKSHOP STORE ROOM IMPROVEMENT WITH 5S: A CASE STUDY. Advanced Manufacturing Technology, 7 (1). pp. 45-62. ISSN 1985-3157

A. P., Puvanasvaran and C. Z. , Mei and V. A. , Alagendran (2013) Overall Equipment Efficiency Improvement Using Time Study In An Aerospace Industry. Procedia Engineering 00 (2013) 000–000. pp. 1-9. ISSN 00 (2013) 000–000

A. P., Puvanasvaran and Kerk, Swee Tian and Muhammad, Mohd Razali (2011) PRINCIPLES AND BUSINESS IMPROVEMENT INITIATIVES OF LEAN RELATES TO ENVIRONMENTAL MANAGEMENT SYSTEM. Proceeding IEEE International Technology Management Conference 2011, 2 (11). pp. 439-444. ISSN 978-1-61284-952

A. P., Puvanasvaran and N., Norazlin and C., Suk Fan (2014) Lean Behavior Impact Towards Lean Management: Case Study. Journal of Advanced Manufacturing Technology (JAMT) , 8 (1). pp. 17-26. ISSN 1985-3157

A. P., Puvanasvaran and Sulaiman, Hisham and Sued, Kamil (2011) INVESTIGATION ON THE MECHANICAL CHARACTERISTICS OF SAWDUST AND CHIPWOOD FILLED EPOXY. Journal of Mechanical Engineering and Technology, 3 (1). pp. 71-78. ISSN 2180-1053

A. P., Puvanasvaran and T.S.N., Stephanie and N., Norazlin (2013) Study On Streamlined Process Improvement By Using Value Stream Mapping In Automotive Seating Company: A Case Study. Journal of Advanced Manufacturing Technology (JAMT) , 07 (2). pp. 57-67. ISSN 1985-3157

A. Perumal, Puvanasvaran and Jamibollah, N.Jamibollah and Norazlin Nasir, N.Norazlin and Adibah Razali, R. Adibah (2014) Poka-Yoke Integration into Process FMEA. Australian Journal of Basic and Applied Sciences, 8 (7). pp. 66-73. ISSN 1991-8178

A. Perumal, Puvanasvaran and Yoong, Sai Sieng and Tay, Choo Chuan (2017) Effect Of Hidden Wastes In Overall Equipment Effectiveness Calculation. ARPN Journal Of Engineering And Applied Sciences, 12 (22). pp. 6443-6448. ISSN 1819-6608

A.Fadzil, Nur Fazreeha Ameelya (2017) The Optimization Of Cold Metal Transfer (CMT) Welding Process Parameters On 5052 Aluminium Alloy Tensile Strength Using Taguchi Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

ABD RAZAK, JEEFFERIE and Haji Ahmad, Sahrim and Thevy Ratnam, Chantara and Mahamood, Mazlin Aida and Mohamad, Noraiham (2015) Effects of poly(ethyleneimine)adsorption on graphene nanoplatelets to the properties of NR/EPDM rubber blend nanocomposites. Journal of Materials Science. pp. 1-17. ISSN 1573-4803

ABD RAZAK , JEEFFERIE and S., Nurhashima and YAAKOB, MOHD YUHAZRI and Sihombing, Haeryip and S., Mohd Shukor and Abdullah, N.S and Omar, M.A (2011) Characterization of Injection Molded 17-4PH Stainless Steel prepared with Waste Rubber Binder. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 3 (1). pp. 11-21. ISSN 2180-1053

ABD RAZAK , JEEFFERIE and Abd Rahim, Toibah and YAAKOB, MOHD YUHAZRI and A.R.M., Warikh and Omar, Nooririnah and Maslan, Mohamad Haidir and Sihombing, Haeryip and Junid, Ramli (2011) Tensile and Impact Properties Evaluation for Enviro-Recycled Wood Plastic Composite of PP/r-WF. Applied Mechanics and Materials, 52-54. pp. 2082-2087. ISSN 1660-9336

ABD RAZAK , JEEFFERIE and Md. Akil, Hazizan and Ong, Huilin (2007) Effect of Inorganic Fillers on the Flammability Behavior of Polypropylene Composites. Journal of Thermoplastic Composite Materials, 20. pp. 195-205. ISSN 0892-7057

ABD RAZAK , JEEFFERIE and Mohamad, Noraiham and Shamsuri, Siti Rahmah (2014) The Effects of Covalent Treated Graphene Nanaoplatelets Surface Modification to Cure Characteristic, Mechanical, Physical and Morphological Properties of NR/EPDM Rubber Blend Nanocomposites. Advances in Environmental Biology, 8 (8 Spec). pp. 3289-3298. ISSN 1995-0756 (In Press)

ABD RAZAK , JEEFFERIE and Mohd Salled, Mohamad Amran and Abd Rashid, Suraya and Ahmadun, Fakhrur'Razi and Ibrahim, Nor Azowa (2010) The Effects of Lower Percentages of Filler Addition to the Mechanical and Morphological Properties of PP/MWCNTs Composites. Journal of Advanced Manufacturing Technology (JAMT) , 4 (1). pp. 1-12. ISSN 1985-3157

ABD RAZAK , JEEFFERIE and Othman, Nurul Fariha and Abd Rashid , Mohd Warikh and YAAKOB, MOHD YUHAZRI and Sihombing, Haeryip and Junid , Ramli (2011) Preliminary study on the Physical and Mechanical Properties of Tapioca Starch / Sugarcane Fiber Cellulose Composite. ARPN Journal of Engineering and Applied Sciences, 6 (4). pp. 7-15. ISSN ISSN 1819-6608

ABD RAZAK , JEEFFERIE and YAAKOB, MOHD YUHAZRI and Sihombing, Haeryip (2011) Mechanical Properties Evaluation for Enviro-Wood Plastic Composite Made of HDPE-PPB-RWF Mixtures. International Journal of Advances in Science and Technology, 3 (2). pp. 87-101. ISSN 2229-5219

Ab Hadi, Nik Azran and Che Hasan, Mohd Hanif and Hashim, Nik Mohd Zarifie and Mohamad, N. R. and Rahimi, A. S. and Mohd Annuar, Khalil Azha (2015) Temperature Monitoring System For Infant Incubator Using Arduino. International Journal For Advance Research In Engineering And Technology, 3 (VI). pp. 8-11. ISSN 2320-6802

Ab Halim, Nabilah (2017) Effects Of Boronizing On Sharp Cornered Metal Surface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Maulod, Hairul Effendy and Yaakub, Juliana and Yaakob, Mohd Yuhazri and Samsudin, Abdul Rahim and Mohamad, Noraiham (2012) Preliminary study of CFRP manufacturing offcuts with secondary resin impregnation via hand lay up. In: International Conference on Design and Concurrent Engineering, 15-16 Okt 2012, Bandar Melaka, Melaka. (Submitted)

Ab Rahman, Mohd Nizam and Wan Mahmood, Wan Hasrulnizzam and Md Deros, Baba (2013) Peningkatan Produktiviti Syarikat Pembuatan Melalui Penambahbaikan Fleksibiliti dan Kecekapan Masa : Satu Kajian Simulasi. Jurnal Teknologi, UTM, 62 (1). pp. 53-61. ISSN 0127-9696

Ab Rahman, Mahmood and Mohamad, Minhat and Halim, Isa and Baharudin, Abu Bakar (2014) Investigation of cutting parameter and machine tool vibration effects using regression analysis to enhance part dimensional accuracy. Applied Mechanics and Materials, 761 (-). pp. 93-97. ISSN 1662-7482

Ab Rahman, Mohd Nizam and Khamis, Nor Kamaliana and Mohd Zain, Rosmaizura and Md Deros, Baba and Wan Mahmood, Wan Hasrulnizzam (2010) Implementation of 5S Practices in the Manufacturing Companies: A Case Study. American Journal of Applied Sciences. pp. 1182-1189. ISSN 1546-9239

Ab. Rahman, Mahmood (2009) BMFB 3572: Tingkahlaku Organisasi (Organizational Behavior). [Teaching Resource]

Ab. Rahman, Mahmood (2009) BMFG 4812: Jurutera Dalam Masyarakat (Engineer In Society). [Teaching Resource]

Ab. Rahman, Mahmood (2010) BMFP 2522: Kualiti Dan Kebolehpercayaan (Quality And Reliability). [Teaching Resource]

Ab. Rahman, Mahmood (2010) BMFP 3523: Pengurusan Kualiti Menyeluruh (Total Quality Management). [Teaching Resource]

Ab. Rahman, Mahmood (2008) BMFP 3572: Tingkahlaku Organisasi (Organizational Behaviour). [Teaching Resource]

Ab. Rahman, Mahmood (2010) BMFP 4563: Strategi Pembuatan (Manufacturing Strategy). [Teaching Resource]

Abang Let, Abang Mohd Elna Fiqri (2017) Facial Characteristic Of Product Preferences Based On Phi Approach Towards Aesthetics. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abbas, Adnan Jameel and Minhat, Mohamad and Abd Rahman, Md Nizam (2012) Optimization of Machining Parameters in Turning Operation Using PSO and AIS Algorithms: A Survey. Scottish Journal of Arts, Social Sciences and Scientific Studies , 7 (1). ISSN ISSN 2047-1278

Abbas, Adnan Jameel and Minhat, Mohamad and Abdul Rahman, Md. Nizam Bin and Akbar, Habibullah (2012) Future prospects of turning processes optimization using metaheuristics methods. In: International Conference on Uncertainty Reasoning and Knowledge Engineering ICURKE 2012, 14-15 Aug. 2012, Jakarta, Indonesia.

Abd Aziz, Syazxerlin (2017) Line Balancing Using Lean Manufacturing Tools At Balloon Packaging Department. Project Report. UTeM, Melaka. (Submitted)

Abd Halim Hakim, Abd Aziz (2010) BMFG 2813: Termo Bendalir (Thermo Fluids). [Teaching Resource]

Abd Halim Hakim, Abd Aziz (2010) BMFG 2813: Termo Bendalir (Thermo Fluids). [Teaching Resource]

Abd Halim Hakim, Abd Aziz (2010) BMFR 4123: Pembuatan Pantas (Rapid Manufacturing). [Teaching Resource]

Abd Halim Hakim, Abd Aziz (2005) BMFS 2513: Proses Pembuatan I. [Teaching Resource]

Abd Lah, Akmal (2015) Establishment Of New Standard Time For The Manufacturing Of Hot-Dip Galvanized Steel Of Tenaga Nasional Berhad (TNB) Concrete Pole Accessories. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Muin, Najihah (2017) Influence Of The Work Hardening On Springback Of The U-Bend 316L Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahim, Hatim Yaseer (2016) A Reconfigurable Logic Control Method For CIM System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahim, Toibah and Sato, Masahiro and Yamada, Motohiro and Fukumoto, Masahiro (2016) Cold-Sprayed TiO2 Coatings From Nanostructured Ceramic Agglomerated Powders. Materials And Manufacturing Processes, 31 (11). pp. 1527-1534. ISSN 1042-6914

Abd Rahman, Ammar and SUBRAMONIAN, SIVARAO and Minhat, Mohamad and Abd. Rahman, Md. Nizam and Salleh, Mohd Rizal (2013) Manufacturing Process Volume 1. Penerbit Universiti UTeM.

Abd Rahman, M.N. and Medjahed, Brahim and Orady, Elsayed A. and Muhamad, Martini Ridha and Abdullah, Rohana and Mohamad Jaya, Abdul Syukor (2018) A Review Of Cloud Manufacturing:Issues And Opportunities. Journal of Advanced Manufacturing Technology (JAMT) , 12. p. 1. ISSN 1985-3157

Abd Rahman, Mahmood (2007) BMFP 4553: Pengurusan Sumber Manusia (Human Resource Management). [Teaching Resource]

Abd Rahman, Md Nizam (2010) BMFS 2513: Proses Pembuatan 1 (Manufacturing Processes 1). [Teaching Resource]

Abd Rahman, Md Nizam (2010) BMFS 2533: Proses Pembuatan (Manufacturing Processes). [Teaching Resource]

Abd Rama, Nur Syafiqah (2017) Development Of A Smart Baby Stroller Using Bluetooth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Razak, Abd Halem (2011) Comparison Of Sand Casting Surface Roughness And Dimension Accuracy Between Aluminium Silicon Carbide And Tin Silicon Carbide. Project Report. UTeM, Melaka. (Submitted)

Abd Razak, Muhammad Hafiz (2009) Design Of The Robust Gripper Control For Hoisting Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Razak, Jeefferie and Haji Ahmad, Sahrim and Ratnam, Chantara Thevy and Mahamood, Mazlin Aida and Yaakub, Juliana and Mohamad, Noraiham (2015) Graphene Nanoplatelets-Filled NR/EPDM Rubber Blend: Effects of GNPs Loading on Blend Processability, Mechanical Properties and Fracture Morphology. Polymer Research Journal, 9 (1). pp. 1-14. ISSN 1935-2530 (In Press)

Abd Razak, Jeefferie and Haji Ahmad, Sahrim and Ratnam, Chantara Thevy and Yaakub , Juliana and Mohd Abid, Mohd Asyadi Azam and Zainal Abidin, Muhammad Zaimi and Abd Manaf, Mohd Edeerozey and Mohamad, Noraiham (2014) Facile surface modification of graphene nanoplatelets (GNPs) using covalent ATPS-dehydration (GNPs-ATPS) and non-covalent polyetherimide adsorption (GNPs-PEI) method. Applied Mechanics and Materials, 761. pp. 391-396. ISSN 1660-9336 (In Press)

Abd Razak, Jeefferie and Haji Ahmad , Sahrim and Ratnam, Chantara Thevy and Mahamood, Mazlin Aida and Lau, K.T. and Ab Maulod, Hairul Effendy and Munawar, Rose Farahiyan and Mohamad, Noraiham (2015) Non-covalent polymeric wrapping of IGEPAL C0890 for graphene nanoplatelets (GNPs-C0890) filled NR/EPDM rubber blend nanocomposites. Applied Mechanics and Materials, 761. pp. 385-390. ISSN 1660-9336 (In Press)

Abd Razak, Jeefferie and Haji Ahmad , Sahrim and Ratnam, Chantara Thevy and Mahamood, Mazlin Aida and Mohamad, Noraiham (2015) Effects of EPDM-g-MAH compatibilizer and internal mixer processing parameters on the properties of NR/EPDM blends: an analysis using response surface methodology. Journal of Applied Polymer Science, 132 (27). pp. 1-15. ISSN 1097-4628 (In Press)

Abd Razak, Jeefferie and Ahmad, Sahrim and Thevy Ratnam, Chantara and Shueb, Mohammed Iqbal and Mahamood, Mazlin Aida and Yaakub, Juliana and Shamsuri, Siti Rahmah and Mohamad, Noraiham (2014) The Effects Of Covalent Treated Graphene Nanaoplatelets Surface Modification To Cure Characteristic,Mechanical, Physical And Morphological Properties Of NR/EPDM Rubber Blend Nanocomposites. Advances in Environmental Biology, 8. pp. 3289-3298. ISSN 1995-0756

Abd Samad, Hasan Basari (2009) DACS 1283: Matematik Sains Komputer II. [Teaching Resource]

Abd Samad, Hasan Basari (2009) Maintenance Modelling Tools With Special Reference To Incomplete Data. PhD thesis, UTeM.

Abd Wahid, Syakira (2017) Development Of Car Temperature Cooling Control By Using Magnet Code. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd. Rahim, Toibah (2016) Fabrication Of Cold Spray Ti-O Coatings Engineered From Agglomerated Powders. PhD thesis, Universiti Teknikal Malaysia Melaka.

Abdul Aziz, Baharuddin (2005) BMFB 3213: Teknologi Plastik. [Teaching Resource]

Abdul Aziz, Baharuddin (2005) BMFB 3242: Bahan Plastik Dan Logam. [Teaching Resource]

Abdul Aziz, Mohamad Azim (2017) Fabrication Of Electronic Fuel Injector Tester For Education Purpose. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Halim, Abd Aziz (2006) BMFG 2813: Termo-Bendalir. [Teaching Resource]

Abdul Halim, Nor Faizah (2017) The Optimization Of Friction Stir Welding Parameter For Aluminium 5052 By Using Full Factorial Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid , Mohd Syaiful Rizal and Chew, Boon Cheong and A.Perumal, Puvanasvaran and Mohd Noor , Khairul Baharein and Shamsuddin, Alina and Hanafi , Zulkifli and Mohd Idris, Mohd Fadzil and Choong, Chien Khay (2018) Preventing Technological Disaster Through Risk Assessment Protocol (RAP) Development For Malaysia High Tech-High Risk Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hayyan, Abdul Halim (2010) The Study Of E6013 Electrode Effect On Microstructure Of Difference Mild Steel Thickness By Using Arc Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Jalil, Muhammad Hafizzul Saffuwan (2017) Design And Development Of A Checking Fixture For An Automotive Press Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Kadir, Mira Asyikin (2016) Welding Patterns Influence On The Joining Strength Of Mild Steel Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Majid , Ali (2008) Autonomous Maintenance Programme For Milling Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Abdul Muhaimin, Mohd Yusri (2015) Quality Improvement Through Lean Six Sigma Approach At Wooden Picture Frame Moulding Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Paizal, Mohd Zain (2015) Analysis Of Preventive Maintenance For Processing Plant (Gassification Process Unit). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Qayyum , Jasmi (2014) Design and simulation of material handling system in automotive industry /. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Samsudin (2004) BMFS 3363: Teknologi Mesin Peralatan (Machine Tools Technology). [Teaching Resource]

Abdul Rahim, Samsudin (2003) Product Development Using Concurrent Engineering. Masters thesis, Universiti Teknologi Malaysia.

Abdul Rahim, Muhammad Rafiq (2017) Design And Development Of Vision Guided Height Adjustable Conveyor Platform On Automated Guided Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Samsudin (2009) BMFG 1833: Mekanik Mesin (Mechanics Of Machine). [Teaching Resource]

Abdul Rahim, Samsudin (2005) BMFG 2813: Termo-Bendalir. [Teaching Resource]

Abdul Rahim, Samsudin (2009) BMFR 2123: Rekabentuk Mesin (Machine Design). [Teaching Resource]

Abdul Rahim, Samsudin (2009) DMFD 2113: Rekabentuk Mesin (Machine Design). [Teaching Resource]

Abdul Rahman, Azrul Azwan and Bilge, Pinar and Seliger, Günther (2011) Simulation Aided Development of Alternatives for Improved Maintenance Network. In: 7th International Conference on Digital Enterprise Technology, 28-30 September 2011, Athens, Greece.

Abdul Rahman, Azrul Azwan and Kernbaum, Sebastian (2007) Simulation Based Control System for a Manufacturing System. In: Conference on Application and Design in Mechanical Engineering, 25-26 Ocktober 2007, Perlis.

Abdul Rahman, Azrul Azwan and Seliger, Günther (2013) Integrated control system simulation for supporting changes of routing strategy in an automated material flow system. Procedia CIRP. pp. 407-412. ISSN 2212-8271

Abdul Rahman, Azrul Azwan and Seliger, Günther (2011) Simulation as a tool in Self Adaptive Control for Flexible Assembly Systems. In: The 44th CIRP Conference on Manufacturing Systems, 31.5.2011 - 3.6.2011, Madison, Wisconsin, USA.

Abdul Rahman, Nurul Amirah (2017) Surface Finish Improvement Using Retraction Method For Fused Deposition Modeling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rashid, Nurulizwa and Shamee, Samer Ali and Jabar, Juhaini (2014) Eco Innovation Effort : A Review Of Dynamic Eco Innovation Practices And New Research Agenda Towards Sustainability Development. International Journal of Innovation and Applied Studies (IJIAS) , 8 (3). pp. 1112-1119. ISSN 2028-9324

Abdul Rasib, Amir Hamzah (2016) Operational Performance Of Automotive Parts Assembly Processes Using Production Capacity Loss Equation. PhD thesis, Universiti Teknikal Malaysia Melaka.

Abdul Razali, Nurul Wahida (2014) Enhancing Quality Management System Through Continuous Quality Improvement Practices In Malaysian Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Syukor, Mohamad Jaya and Abd. Samad, Hasan Basari and Sazalinsyah, Razali and Muhd Razali, Muhamad and Md. Nizam, Ab. Rahman (2014) Modeling of TiN coating thickness using ANFIS. Trans Tech Publications, Switzerland.

Abdul Syukor, Mohamad Jaya and Nur Athirah , Abdul Kadir and Mua'th, Mohamad Jarrah (2014) Modeling of TiN coating roughness using fuzzy logic approach. Science International (Lahore), 26 (4). pp. 1563-1567. ISSN 1013-5316

Abdul Wahid, Nadia Mazwa (2017) Effect Of Repair Welding On Pipes With Dissimilar Materials. Technical Report. UTeM, Melaka. (Submitted)

Abdullah, Rohana and Ahmad, Nurul Huda (2010) Development of Automated Maynard Operation Sequence TEchnique (MOST) Work Study Technique: Case Study at Aerospace Manufacturing Company Using Lean Six Sigma. In: 3rd International Conference on Science and Technology: Applications in Industry and Education, 16-17 Dec 2010, The Gurney Resort Hotel and Residence, Penang.

Abdullah, Mohammad Amirul (2016) Product Development Of Smart Soap Making Machine For Home Appliances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Rohana (2017) Human System Modelling For Labour Utilisation And Man-Machine Configuration At Cellular Manufacturing. PhD thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Rohana and Mohamad, Effendi and Mohamad, Nor Akramin and Saptari, Adi (2009) Productivity Analysis Towards Lean Manufacturing at a Textile Manufacturing Company. In: Malaysian Technical Universities Conference on Engineering and Technology 2009, 20-22 June 2009, MS Garden Hotel, Kuantan, Pahang.

Abdullah, Rohana and Mohamad, Effendi and Muhamad, Mohd Razali (2008) Managing Key Performance Indicators (KPIs): A Case Study at an Aerospace Manufacturing Facility. In: Knowledge Management International Conference 2008, 10-12 June 2008, Langkawi, Malaysia.

Abdullah, Rohana and Mohamad, Nor Akramin and Abdul Rahman, Mohd Soufhwee (2011) Design and Development of Material Requirement Planning (MRP)Tool for an Electronic Product Manufacturer. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Abdullah, Rohana and Saptari, Adi and Mohamad, Nor Akramin and Isa, Halim and Mohamad, Effendi (2008) Simulation Modeling for Balancing and Optimizing a Digital Measuring Device (DMD) Production Line. In: Malaysian Technical Universities Conference 2008, 15-16 March 2008, Putra Palace, Kangar, Perlis.

Abdullah, Rohana and Saptari, Adi and mohamad, Nor Akramin (2010) Manpower Optimization and Process Efficiency Improvement at a Textile Manufacturing Company. In: Waset 2010, 24-26 Feb 2010, Bayview Hotel, Georgetown, Penang.

Abdullah Kamil, Puteri Eliani Fikri (2017) Layout Analysis And Improvement In A Manufacturing Industry - A Case Study. Technical Report. UTeM, Melaka. (Submitted)

Abdullah Sani, Nor Syaima' (2014) 5S Implementation In Malaysian Manufacturing Industry : What's New? Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu, Abdullah (2009) BMFP 4563: Strategi Pembuatan (Manufacturing Strategy). [Teaching Resource]

Abu, Abdullah and Nur Izan Syahriah, Hussein (2003) BMFG 2513: Proses Pembuatan I. [Teaching Resource]

Abu, Nor Hashidah and Mohamad Jaya, Abdul Syukor and Muhamad, Mohd Razali (2017) Modeling Sustainable Manufacturing Practices Towards Economy Sustainability Performance. ARPN Journal Of Engineering And Applied Sciences, 12 (14). pp. 4214-4218. ISSN 1819-6608

Abu , Abdullah and Puvanasvaran, Perumal (2003) BMFS 2523: Manufacturing Process II. [Teaching Resource]

Abu Bakar, Baharudin (2010) DMFD 3333: Teknologi CNC (CNC Technology). [Teaching Resource]

Adam Maleck , Hamid (2008) Part Combination Of Design For Assembly (DFA) Using Flow Analysis (EFA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adi, Saptari (2006) BMFP 3533: Perancangan & Kawalan Kualiti. [Teaching Resource]

Adi, Saptari (2007) BMFP 3533: Perancangan & Kawalan Pembuatan (Manufacturing Planning & Control). [Teaching Resource]

Adi, Saptari (2009) BMFP 3553 / BMFP 4593: Ergonomik Industri (Industrial Ergonomics). [Teaching Resource] (Submitted)

Adi, Saptari (2009) BMFP 4533: Pengurusan Operasi (Operation Management). [Teaching Resource]

Adi, Saptari (2005) BMFP 4593: Ergonomik Industri. [Teaching Resource]

Adi, Saptari (2010) MMFU5033: Management Of Global Manufacturing Operations. [Teaching Resource]

Adi , Saptari and Isa , Halim and Seri Rahayu , Kamat and Nor Akramin, Mohamad (2008) Productivity Analysis at a Small and Medium Enterprises (SMEs)Focusing on Work Study, Line Balance and Ergonomics. In: International Conference on Mechanical and Manufacturing Engineering 2008, 21-23 May 2008, Johor Bahru, Johor.

Adi , Saptari and Seri Rahayu , Kamat and Wan Hasrulnizzam , Wan Mahmood and Isa, Halim (2007) Optimum Workspace Design in A Plug Assembly Line. In: International Conference on Engineering and ICT (ICEI 2007), 27-28 November 2007, Hotel Equatorial Melaka.

Adi , Saptari and Seri Rahayu , Kamat and Wan Hasrul , Wan Mahmud and Isa, Halim (2007) A Plug Assembly Line: An Assessment of Workstation Design and Working Posture. Journal of Biomechanics, 40 (2). S152-S152. ISSN 0021-9290

Adi Khairi, Abdul Latif (2015) Robust Automated Guided Vehicle (AGV) Controller Design Method For Uneven Terrains Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adibah , Razali (2013) Manufacturing process selection for pet bottles using analytical hierarchy process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Adibah Hanun, Mohd Arif (2015) Design, Analysis And Simulation Of Casting Defect On Water Pump Housing Using Casting Simulation Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Mohammad Noor Khairul Azrin (2008) Design And Development Of Cctv Using Webcam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afandi, Abd Latif (2011) Application Of Material Selection On Bumper Fascia Based On Design For Sustainability (DfS) Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Affendi , Hussin (2008) Design, Analysis And Fabricate Of Pressure Vessel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad, NurulHuda and Kamat, Seri Rahayu and Minhat, Mohamad and Bani Hashim, Ahmad Yusairi and Isa, Halim (2014) Modeling an Ergonomic Driving for In-Car Interaction: A Propose Framework. In: International Conference on Industrial Engineering and Operations Management (IEOM2014), January 7 – 9, 2014, Bali, Indonesia.

Ahmad, Akmal Abdul Rahim (2017) Spare Parts Optimization (Valve) For Boiler At Coal Fired Power Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Nurul Aini (2016) An Integrative Model Of Responsiveness And Sustainability Requirements For Automotive Industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad, NurulHuda and Kamat, Seri Rahayu (2012) CAR ACCIDENTS ANALYSIS THROUGH VIRTUAL WINDOW INTERFACE. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

Ahmad, Suraya (2017) The Challenges Of Lean Implementation: A Multiple Case Study In Malaysian Aerospace Companies. Journal Of Asian Vocational Education And Training, 10. pp. 103-120. ISSN 2005-0550

Ahmad Akmar, Ahmad Zahin (2017) Design Of Automatic Workplace Clamp For Bridgeport Vertical Milling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fadlishah , Ahmad Foad (2009) Robocon Manual Robot Gripping Mechanism. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Faizal, Baharudin (2005) Wagon Elektrik : Pembangunan Yang Di Guna Di Dalam Pembuatan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizal , Ahmad Jamil (2008) Joining Performance Of Aluminium T6063 Using GTAW Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fitri, Sukarman (2010) Implementation Of Design For Manufacturing And Assembly (DFMA) Methodology To Analyze Antitheft Device System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Kamely, Mohamad (2008) BMFS 3373: Teknologi CNC (CNC Technology). [Teaching Resource]

Ahmad Kamely, Mohamad and Johny Purnomo, Joewono (2013) Performance Analysis Of Mechanical Properties And Weldment Area Of Aluminium Alloys. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Murad, Murzidah (2017) Industrial Manufacturing Technology Diffusion Of Malaysian Manufacturing Small And Medium Enterprises (SMES). PhD thesis, Universiti Teknikal Malaysia Melaka.

Ahmad Muslim , Othman (2008) Failure Analysis On TIG Weldment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nordin, Mohd Firdaus (2017) Design Of Integrated 3D Printer Recycle Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rijal , Abdul Rahman (2010) Maintenance Monitoring System Using Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Shafie, Razak (2015) Comparative Study On Differene Approach Of Boothroyd Dewhurst (B-D) Design For Assembly Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syahid , Mohamad (2009) A Study On The Application Of Value Stream Mapping In Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Yusairi, Bani Hashim (2004) BMFA 2443: Kuasa Bendalir. [Teaching Resource]

Ahmad Yusairi, Bani Hashim (2003) BMFA 2443: Kuasa Bendalir. [Teaching Resource]

Ahmad Yusairi, Bani Hashim (2009) BMFA 3473 / BMFA 4453: Instrumentasi & Penderia (Sensors & Instrumentation). [Teaching Resource]

Ahmad Yusairi, Bani Hashim (2008) BMFA 3473: Instrumentasi & Penderia (Sensor & Instrumentation). [Teaching Resource]

Ahmad Yusairi, Bani Hashim (2009) BMFA 4413: Pemodelan Robot (Robot Modelling). [Teaching Resource]

Ahmad Yusairi, Bani Hashim (2010) BMFA 4433: Aplikasi Robot (Robot Application). [Teaching Resource]

Ahmad Yusairi, Bani Hashim (2010) BMFA 4433: Aplikasi Robot (Robots Application). [Teaching Resource]

Ahmad Yusairi, Bani Hashim (2007) BMFA 4453: Sistem Penderiaan & Penglihatan (Vision & Sensor system). [Teaching Resource]

Ahmad Yusairi, Bani Hashim (2010) BMFA 4473: Robotik Termaju (Advanced Robotics). [Teaching Resource]

Ahmad Yusairi, Bani Hashim (2010) BMFA 4473: Robotik Termaju (Advanced Robotics). [Teaching Resource]

Ahmad Yusairi, Bani Hashim and Seri Rahayu , Kamat and Shajahan, Maidin (2004) BMFA 2423: Kejuruteraan Kawalan. [Teaching Resource]

Ahmad Yusairi , Bani Hashim (2006) BMFA 2423: Instrumentasi & Kawalan. [Teaching Resource]

Ahmad Yusairi , Bani Hashim (2006) BMFA 4453: Sistem Penderia & Penglihatan. [Teaching Resource]

Ahmad Zahirudin , Mohamad Ramdzan (2008) Proses Pengoptimuman Parameter FDM Bagi Material ABS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aida Adlina , Mohamad Raffi (2006) Machining Performance Of Titanium Carbide (TiC) As Tool Coating. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Aizuddin , Pata Ariffin (2007) Design And Development Of CIM System - Lifter Platform. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Akhyani , Alias (2015) Six sigma implementation to improve quality. Project Report. UTeM. (Submitted)

Akmal, Suriati (2014) Ontology-based similarity for product information retrieval. Computers in Industry, 65. pp. 91-107. ISSN 0166-3615

Akmal, Suriati (2006) Product design for mass customization and postponement. Masters thesis, Technische Universitat Berlin.

Akmal, Suriati and Kamalrudin, Massila and Safiah, Sidek (2015) FORMAL ATTRIBUTE SPECIFICATION TEMPLATE TO ELICIT ACCURATE AUTOMOTIVE REQUIREMENTS. International Journal of Multidisciplanary Approach Studies, 1 (9). pp. 184-189. ISSN 2394-7926

Akmal, Suriati (2017) Ontology-Based Approach To Elicit Precise Information For Accurate Automotive Product Development. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Al Amin, Mohamed Sultan (2009) Development Of General Value Stream Mapping For Productivity Improvement And Kaizen Implementation At An Aerospace Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al Amin, Mohammed Sultan and Isa, Halim (2014) Application of quality function deployment to design a liquefied petroleum gas trolley. Applied Mechanics and Materials, 761 (-). pp. 698-702. ISSN 1662-7482

Al-Bakri, Abdulrahman Mohsen Saleh (2017) Design Of Control And Integration Strategy For Multiple Handling System Using Programmable Logic Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alagendran, Andiappan (2013) Developing Lean - EMS Integration Database For Sustaining ISO 14000 Certification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alagendran, Andiappan (2013) Developing Lean - EMS Integration Database For Sustaining ISO 14000 Certification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alhawari, Khaled Salem and Omar, Mohd Zaidi and Ghazali, Mariyam Jameelah and Salleh, Mohd Shukor and Abdulrazaq, Mohammed Naser (2017) Effect Of Thixoforming On The Wear Properties Of Al-Si-Cu Aluminum Alloy. Jurnal Teknologi , 79 (5-2). pp. 83-87. ISSN 0127-9696

Alia Najwa, Runuma (2015) Vacuum Casting: Fabricating A Pipe Reducer Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alias, Farah Nurhidayah (2017) Design For Improvement Of Metrology And Inspection Of Integrated Circuit For Accuracy Check Using Smartscope Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aliff Zulkarnain , Mohd Nor (2015) Zero tolerance in production for quality improvement at composite industry. Project Report. UTeM. (Submitted)

Alkahari, Mohd Rizal and Furumoto, Tatsuaki and Ueda, Takashi and Hosokawa, Akira (2014) Consolidation Characteristics Of Ferrous-Based Metal Powder In Additive Manufacturing. Journal Of Advanced Mechanical Design, Systems, And Manufacturing, 8 (1). pp. 1-16. ISSN 1881-3054

Alwiy, Muhamad Fauzie (2017) Design Of Personalised Insole For Production Line Industrial Workers Via Level Of Pain And Pressure Distribution Data. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aman, Aminudin and Yaacob, Mohd Muhridza and ABD RAZAK , JEEFFERIE (2011) Dieletric Strength of Waste Tyre-Dust-Polypropylene (WTD-PP) for High oltage Application. Australian Journal of Basic and Applied Sciences, 5 (9). pp. 1578-1583. ISSN 1991-8178

Ameen , Mahadi (2008) Developmet Of Human Interface (HMI) For Flexible Manufacturing System (FMS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Amin, Abdullah Hapipi (2015) Dimensional Accuracy Of The Platinum Faro Arm For Reverse Engineering Products Using Fused Deposition Modeling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir, Azuwaizie (2010) Implementation of RFID Technology At The Zoo Entrance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Hanin , Yazid (2007) Productivity Improvement Using One Piece Flow Techniques : A Study At An Electronic Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amira, Sahari (2012) Time Study Method Implementation At Jecmetal Industries Sdn. Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul , Sait (2008) Potential Application Of Ferrofluid For Robot Gripping Mechanism. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Amirulnozam, Hamidon (2005) To Develop The Production Process Flow Layout For Casting Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amit, Auzai (2017) Design Of Electronic Fuel Injector Tester For Educational Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ammar, Abd Rahman (2008) BMFG 4813: Sistem Pembuatan (Manufacturing System). [Teaching Resource]

Ammar, Abd Rahman (2009) BMFS 2523: Proses Pembuatan 2 (Manufacturing Process 2). [Teaching Resource]

Anantharao , Supramaniam (2014) Implementation of online monitoring system to determine overall equipment effectiveness. Masters thesis, UTeM.

Ang, Chi Yuan (2014) A Study Of Eco-Innovation In Small And Medium Enterprises (SME) Manufacturing : A Case Of Selangor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Sei Qi (2010) Develop A Linear Measurement Sensor System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aniz Farznor, Sariffuddin Hussani (2015) Investigation Of Design Rule For FDM System In Additive Manufacturing: A Case Study Of A Blender Jar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Antasya , Mohd Arif (2006) Analysis Of Different Current Setting In OTC DR 4000 Robot Welding For Mild Steel. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Anuar , Muhammad (2006) Study The Wear On High Speed Steel (HSS) Cutting Tool By Variable Parameters Turning Operation. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Anuar , Mohamed Kassim and Takashi , Yasuno and Hiroshi, Suzuki and Mohd Aras, Mohd Shahrieel and Jaafar, Hazriq Izzuan and Jafar, Fairul Azni and Subramonian, Sivarao (2016) Conceptual Design And Implementation Of Electronic Spectacle Based Obstacle Detection For Visually Impaired Persons. JOURNAL OF ADVANCED MECHANICAL DESIGN, SYSTEMS, AND MANUFACTURING, 10 (7). pp. 1-12. ISSN 1881-3054

Anwaruddin, Amirah Nadiah (2016) Portable LED Dot Matrix Display Board. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aqmal, Hashim (2013) Remanufacturing Analysis By Using Failure Mode And Effects Analysis (FMEA) For Engine Block. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arep@Ariff, Hambali and Minhat, Mohamad (2010) Concurrent Decisions using Analytical Hierarchy Process at the Conceptual Design Stage. Journal of Advanced Manufacturing Technology (JAMT) , 5 (1). pp. 79-85. ISSN 1985-3157

Ariston Shah, Azmeer Shah (2017) Performance Analysis Of Industrial Robot Under Loaded Conditions And Various Distances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arshad, Nurul Hidayah and Arep @ Ariff, Hambali and Samsudin, Abdul Rahim and Minhat, Mohamad (2011) Application of Integrated Kano’s Method and Quality Deployment Function in New Product Development Process. In: International Conference on Advanced Manufacturing 2011 , May 23 – 24, 2011, TATi University College, , Terengganu.

Asaari , Mohd Muji (2007) CS-8 Humanoid Robot (Body). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ashrof, Suaib (2015) Design And Development Of A Navigation System For AGV. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asih, , Hayati Mukti and Chong, Kuan Eng (2014) Throughput and Tester Utilization Improvement in the Hard Disk Drive Assembly Line using Hybrid Simulation Approach. Advanced Science Letters, 20 (2). pp. 455-459. ISSN 1936-6612

Aslah, Mohd Zaim Afiq (2017) A Study Of Future Of Manufacturing In The Context Of Developing Countries. Project Report. UTeM, Melaka. (Submitted)

Asleeda , Ahmad (2008) Six Sigma (DMAIC) Implementation In Industry. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Athirah, Mohd Ghazali (2015) A Case Study Of Causes Of Manufacturing Losses In Palm Oil Mill. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Atiyah, Mohsin Hameed (2016) The Influence Of Friction Stir Welding Parameters On Mechanical Properties Of 6061-T6 Aluminum Alloy. Masters thesis, Universiti Teknikal Malaysia Melaka.

Aun, Khor Yong (2008) Analysis Of Data Exchange In CAD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang @ Rozalli, Ahmad Sofwan (2016) Design Of Ultimate Shield For Fire Fighting Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ayob, Muhammed Syameel (2017) Parameter-Properties Relationship Of Thin Plate Welding By Coldarc Technology. Project Report. UTeM, Melaka. (Submitted)

Ayop, Zakiah and Mustafa, Nuridawati and Chang, Jonathan and Wong, Boon Min and Zainal Abidin, Zaheera and Lim, Jie hui and Anawar, Syarulnaziah (2014) Automation-testing for monitoring the network health of manufacturing web-based application. In: International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), 15 and 16 October 2014, PPS UTeM .

Ayu Fateha, Abdul Hamid (2015) Lean Manufacturing At Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azemin, Masyhadi (2016) Design And Analysis Of Optimum Clearance Of An Open Small Thimble Blanking Die. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azie Noor Marlia, Ruslan (2015) Design Analysis Of A Baby Stroller By Using Design For Manufacturing And Assembly Method (Boothroyd Dewhurst). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz Hussein, Sadiq and S., Thiru and Izamshah, Raja and Md Tahir, Abd Salam (2014) Unstable Temperature Distribution in Friction Stir Welding. Advances in Materials Science and Engineering, 2014 (2014). p. 8. ISSN 1687-8434

Azizah, Shaaban (2007) BMFB 3213: Teknologi Plastik (Plastic Technology). [Teaching Resource]

Azizah, Shaaban (2007) BMFB 3213: Teknologi Plastik (Plastic Technology). [Teaching Resource]

Azizah, Shaaban (2008) BMFB 3213: Teknologi Plastik (Plastik Technology). [Teaching Resource]

Azizah, Shaaban (2009) BMFP 4573: Undang-Undang Industri Dan OSHA (Industrial Law & OSHA). [Teaching Resource]

Azizah , Shaaban (2010) BMFP 4573: Undang-Undang Industri Dan OSHA (Industrial Laws And OSHA). [Teaching Resource]

Azizul , Mokhtar (2007) Line Balancing And Optimization For Single Model Assembly Line At A Small Medium Industry (SMI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlan , Othman (2006) Development Of Low Cost MRP Software For A Manufacturing Process. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Azlan Soffian, Borhan (2015) Estimate The Life Cycle Of Roller By Experiment And Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlinda, Mohamad (2013) Optimization Of Injector Gun Design Using Design For Manufacturing And Assembly (DFMA) At The Conceptual Design Stage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Mohd Talib (2005) Design For Environment In Electronic Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Farah Nadia and Zaibon, Syamsul Bahrin and Shiratuddin, Norshuhada (2018) Modelling Learner-Generated Comic Production:An Initial Design. Journal of Engineering and Applied Sciences, 13. pp. 2237-2241. ISSN 1816-949X

Azman, Hamzah (2007) XY Palletizing Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Nor Azatul Fasya (2017) Elimination Of Product Shortage At Dispatch Line In Manufacturing Industry By Using Lean Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Norsyafiq Amirulamry (2017) Effect Of Citrate Bath Composition And Heat Treatment Process On The Properties Of Electrodeposited Nickel-Fly Ash (Ni FA) Composite Coating On Aluminium Alloy 7075 Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrif Faris , Abdul Jalil Alwi (2015) Design and fabrication of semi-automated parts supply system for automotive industry. Project Report. UTeM. (Submitted)

Azrin , Tahrel (2014) Evaluation of ceramic lab facalities layout design of KKTM Masjid Tanah using SLP method. Masters thesis, UTeM.

Azrul , Jasni (2007) Portable Cocoa Bunch Wrapping Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrul Azwan , Abdul Rahman (2005) Development Of A Simulation Based Control System For A Flat Screen Monitor Remanufacturing System. Masters thesis, Technical University Berlin.

Azrul Azwan , Abdul Rahman (2005) BMFS 3363: Teknologi Peralatan (Machine Tools Technology). [Teaching Resource]

B

Badeli, Siti Yuhainiazwa (2016) Applying Process Failure Mode And Effect Analysis (PFMEA) Approach By Using DMAIC To Improve Product Quality Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bagas, Wardono (2005) BMFG 4813: Manufacturing System. [Teaching Resource]

Bagas, Wardono (2006) BMFG 4813: Sistem Pembuatan. [Teaching Resource]

Bagas, Wardono (2007) BMFG 4813: Sistem Pembuatan. [Teaching Resource]

Bagas, Wardono (2007) BMFG 4813: Sistem Pembuatan. [Teaching Resource]

Bagas, Wardono (2008) BMFS 3313: Simulasi Dalam Sistem Pengeluaran (Simulation In Production System). [Teaching Resource]

Bagas, Wardono (2009) BMFS 3313: Simulasi Dalam Sistem Pengeluaran (Simulation In Production System). [Teaching Resource]

Bagas, Wardono (2009) DMFG 3813: Sistem Pembuatan (Manufacturing Systems). [Teaching Resource]

Baharudin, Abu Bakar (2005) BMFS 4373: Rekabentuk Produk & Pembuatan. [Teaching Resource]

Baharudin, Abu Bakar (2009) DMFD 3333: Teknologi CNC (CNC Technology). [Teaching Resource]

Bakri, Mohammed Hariri and Abdullah, Abu and Musa, Haslinda and Jayakrishnan, Mailasan and Azmi, Fadhlur Rahim (2018) The Adoption Of Halal Food Supply Chain Towards The Performance Of Food Manufacturing In Malaysia. Management Science Letters, 8. pp. 755-766. ISSN 1923-9335

Baloch, Muhammad Moazam (2005) Directional Recrystallisation In Mechanically Alloyed Metals. -. pp. 120-131. ISSN -

Bani Hashim, Ahmad Yusairi and Noor Azuan, Abu Osman and Wan Abas, Wan Abu Bakar (2011) Determining Foot-Ankle Mechanism Design by Mapping the Relationships Among Bones, Joints, and Ground Reaction Force. Global Engineers & Technologists Review, 1 (2). pp. 39-47. ISSN 2231-9700

Basari, A. S. H. and Jaya, A. S. M. and Hashim, S. Z. M. and Haron, H. (2011) Application of ANFIS in predicting TiAlN coatings flank wear. In: UNSPECIFIED.

Basem Yousef Mofadi, Zughoul (2014) Generic software development framework for enterprise resource planning system development. PhD thesis, UTeM.

Bilge, Pinar and Abdul Rahman, Azrul Azwan (2014) A case study material flow simulation based analysis for maintenance network improvement. Journal of Advanced Manufacturing Technology. pp. 1-15. ISSN 1985-3157 July-December 2008

Bin Md Fauadi, Muhammad Hafidz Fazli and Yahaya, Saifudin Hafiz (2013) Intelligent Combinatorial Auctions of Decentralized Task Assignment for AGV With Multiple Loading Capacity. IEEJ TRANSACTIONS ON ELECTRICAL AND ELECTRONIC ENGINEERING, 8 (4). pp. 371-379. ISSN 1931-4973

Bong , Kuan Fung (2009) Engineering Design Analysis On 5 Kg Payload Gripper For Comao Robot. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Budi, Suprapto (2007) Impact Of Strategy Type Toward The Firm Performance: The Indonesian Chemical Industry Evidence. In: International Conference on Engineering and ICT (ICEI 2007) Engineering & ICT, Meeting the Challenges of Advanced Manufacturing Proceedings , 27-28 November 2007, Hotel Equatorial Melaka, Malaysia. (Submitted)

Burhanuddin, Mohd Aboobaider and Mohammad Ishak, Desa and Zeratul Izzah, Mohd Yusoh and Sazalinsyah, Razali (2007) Rekabentuk Dan Pembangunan Sistem Penyelenggaraan Mesin Kilang Pemprosesan Makanan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

C

C, Sanjay (2004) BMFS 3343: Production Tooling. [Teaching Resource]

Carrie, Wong Siaw Shien (2015) Planned Yield, Time Yield And Simple Yield Methods To Calculate OEE Metric In Semiconductor Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chai, Agatha Yan Hong (2017) Improving Inventory Management Using Open Source Software Enterprise Resource Planning (OSS/ERP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Tai Tiong (2006) Process Planning For CNC Milling Machine. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Chan, Yean Kwan (2016) Redesign Warehouse Storage And Retrieval System At Apparel Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang, Chia Wen (2017) Improving Production Planning Using Open Source Material Requirements Planning (OSS/MRP) Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang, Shi Mei (2015) Design Of Control Unit/Data Path For Production Monitoring System Using FPGA Based On Overall Equipment Effectiveness (OEE). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ab. Hamid, Mohamad Nor Hafiz (2016) Develop Standardization Work Of Coil Setup At Pressing Machine : A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Deraman, Nurul Farhanah (2017) The Importance Of Lean Manufacturing Practices Towards Enhancing SMEs' Productivity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ku Abdul Majid , Che Ku Ariffin (2015) Preventive maintenance (PM) system applying at JTKP's labs. Project Report. UTeM. (Submitted)

Che Ku Norazma Adawiyah , Che Ku Aziz (2008) Design And Experimental Study Of Keris Mould Using Doe. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mat, Abdul Azim (2016) Development Of A New Die For The Manufacturing Of Telekom Malaysia Berhad (TM) Metal Based Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Othman, Khairulnisaq (2011) 'Back To Basics' Project. Project Report. UTeM, Melaka. (Submitted)

Che Rozaida , Che Mod (2009) Design Improvement On Support System For Resin Based 3D Printer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheang, Shing (2017) Design Of Product Packaging For Product Brand Communication Based On Consumer Responses. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chee, Chew Yen (2011) Line Balancing Using Simulation In Semiconductor Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chee, Yik Pei (2017) Implementation Of Information, Decision And Action (IDA) Method In Overall Equipment Effectiveness (OEE) To Improve Manufacturing Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chee Fai, Tan and Sarban Singh, Ranjit Singh (2013) Design And Development Of An Interactive Concurrent Engineering Design System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chen, Pick Wei (2010) Study On Computer Aided Manufacturing (CAM) Software For A XY Table Positioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chen , Siew Teen (2011) Optimization On Manufacturing And Assembly Of The Existing Outdoor Swing. Project Report. UTeM, Melaka Malaysia. (Submitted)

Cheng, S.Y. (2007) Effect of bar sealing parameters on OPP/MCPP heat seal strength. eXPRESS Polymer Letters. pp. 773-779. ISSN 1788618X

Cheng, S.Y. (2007) Heat Sealability of Laminated Films with LLDPE and LDPE as the sealant Materials in Bar Sealing Application. Journal of Applied Polymer Science, 104 (6). pp. 3736-3745. ISSN 1097-4628

Cheng, Si Pei (2015) Implementation of lean production to overcome barriers : a study on human factor. Project Report. UTeM. (Submitted)

Cheng, Wei Chiat (2016) Five Axis Tool Path Programming Utilizing CATIA V5 Single Blade. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheong, Kai Mun (2016) Determination Of The Influence Of Chemical Treatment To The Strength Of FDM Used Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew, Lai Huat (2011) Integrated Product Design And Optimization Of Multiplex Electrode Holder For ARC Welding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew, Chee Seng (2017) Development Of Decision Making Process For Fused Deposition Modeling Machines Selection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew , Heng Boon (2008) Determination Of 3-Dimensioanl Robot Workspace And Safe Working Area Using Computer Software. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chew Seow, Lee (2013) Effect of Wire Electrical Discharge Machining (WEDM) parameters and additive treatment on surface roughness and dimensional stability of tool steel. Masters thesis, UTeM.

Chiam, Chun Hong (2017) Integration Of An Automated Guided Vehicle System With A Programmable Logic Controlled Material Handling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chiew, Thiam Huat (2016) The Communication, Skill And Knowledge That Affect 5S Methodology Toward Performance Improvement In Paper Mill Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Gee Sing (2011) Development Of Automatic Quality Control System Using Vision System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Yi Shian (2010) An Application Of P Control Chart To A Pager Assembly Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin , Feei Ping (2009) Design And Analysis Of Robot Manufacturing System For Automotive Industry. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chong, Jia Ming (2015) Optimizing Operator Cycle Time In A Semiconductor Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Kuan Eng (2010) BMFP 4623: Pemodelan Dan Simulasi (Modelling And Simulation). [Teaching Resource]

Chong, Kuan Eng (2010) BMFP 4623: Simulasi Dan Pemodelan (Modeling And simulation). [Teaching Resource]

Chong, Kuan Eng (2010) MMFD5023: Supply Chain Management. [Teaching Resource]

Chong, Kuan Eng and Lim, Ke Sin (2013) CONWIP based Control of a Semiconductor End of Line Assembly. Procedia Engineering , 53. pp. 607-615. ISSN 1877-7058

Chong, Siew Leet (2012) Benefit of Enterprise Resource Planning (ERP) system towards supply chain performance. Masters thesis, UTeM.

Chong , Kuan Eng (2010) A Technique For Balancing And Smoothing Multi-Constraint Assembly Lines. PhD thesis, UTeM.

Choo, Jia Huang (2016) Investigation Of The Effect Of Build Orientation On Mechanical Properties Of Fused Deposition Modeling Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua, Kok Yau (2015) The Micro-Structural Characterization Of Thermosonic Cu-Al Intermetallic Compounds And Modelling Of Its Interface Stress. PhD thesis, Universiti Teknikal Malaysia Melaka.

Chung, Kar Yee (2017) Study Of An Aesthetic / Emotional Preferences On The Product Design Characteristics. Project Report. UTeM, Melaka. (Submitted)

chitrambalam, S.Thiru and Lai Huat, Chew and bin Idral, Febrian (2013) PREDICTION and MEASUREMENT of WELD DILUTION in ROBOTIC CO2 ARC WELDING. World Applied Sciences Journal (WASJ). pp. 23-30. ISSN 18184952

D

D.M., Elias and Y, Yusri and M, Mohamad (2011) A FRAMEWORK FOR A DEVELOPMENT OF AN INTELLIGENT CNC CONTROLLER BASED ON STEP-NC. In: International Conference on Manufacturing Science and Technology ICMST 2011, 16 - 18 September 2011, Singapore.

D.M., Elias and Yusof, Yusri and Minhat, Mohamad (2011) A REVIEW OF INTELLIGENT CNC CONTROLLER DEVELOPMENT BASED ON STEP-NC. In: 2nd International Conference on Mechanical and Manufacturing Engineering (ICME 2011), 6 - 8 June 2011, PICC, Putrajaya.

Dan, M M P and Aaron Yu, L (2012) Design and Analysis a New Materials of Gasket Pipping Using Waste Rubber Tyres and Coconut Coir Fibre. Journal of Advanced Manufacturing Technology (JAMT) , 6 (2). pp. 1-15. ISSN 1985-3157

Dan, M M P and Bani Hashim, Ahmad Yusairi and Adnan, R A B and Ruzaidi, Z and Khairul, A A R and Rizal, M S and Anton, S P (2012) Computer Vision Based Robotic Polishing Using Artificial Neural Networks. Journal of Advanced Manufacturing Technology, 6 (1). pp. 1-16. ISSN 1985-3157

Dan, M M P and Fadhli Akmal, A M (2012) Design Crash Cushion Using Waste Tire for Toll Plaza Barrier. Journal of Advanced Manufacturing Technology (JAMT) , 6 (2). pp. 1-10. ISSN 1985-3157

Dan, M M P and Khairul Fikhri, K A (2012) Study of Bollard Pull Harbour Tug: Focuses on Stability and Straight Movement. Journal of Advanced Manufacturing Technology (JAMT) , 6 (2). pp. 1-14. ISSN 1985-3157

Dimin, Mohd Fairuz and Sian Meng, Se and Azizah, Shaaban and Hashim, Mohammad Muaz (2014) Urea impregnated biochar to minimize nutrients loss in paddy soils. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 2016-2024. ISSN 2229-8649

Din, Abdul Talib and V.K., Kher and Chee, Fai Tan (2014) An Innovative Method Of Harnessing Hydraulic Energy For Mini Cost-Saving Water Treatment Plnat Using Hydraulic Turbine : A Mathematical Approach Towards Design And Analysis. Applied Mechanics and Materials, 752-75. pp. 833-838. ISSN 1660-9336

Doris, Ting Hui Chii (2015) Assessment Of Storage And Retrieval System At Apparel Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Draman @ Muda, Azah Kamilah and A. Jalil, Intan Ermahani and Azmi, Mohd Sanusi and Radzid, Amirul Ramzani and Melhem, Laith Bany and Arbain, Nur Atikah (2018) Framework Of Page Segmentation For Mushaf Al-Quran Based On Multiphase Level Segmentation. International Journal of Computer Information Systems and Industrial Management Applications, 10. 028-037. ISSN 2150-7988

Dujong Inggom, Stephanie (2016) Inventory Management System For Multi Level Goods. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dzulhisham, Aminuddin (2010) Reliability Study On Automotive Component Using Design Failure Mode And Effect Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

E

Ebrahim, Zuhriah and Abdul Rasib, Amir Hamzah (2017) Unnecessary Overtime As A Component Of Time Loss Measures In Assembly Processes. Journal Of Advanced Manufacturing Technology, 11 (1). pp. 37-47. ISSN 1985-3157

Ebrahim, Zuhriah and Hasan, Muhammad Syahid and Wan Mahmood, Wan Hasrulnizzam and Ab. Rahman, Mohd Nizam (2018) Factor Influencing Enterprise Resource Planning System:A Review. Journal of Advanced Manufacturing Technology (JAMT) , 12 (1). pp. 247-258. ISSN 1985-3157

Ebrahim, Zuhriah and Abdul Wahab, Amelia Natasya and Shamsuddin, Taufiqurrahman (2015) Fit Manufacturing:Analogy Of Human Fitness Components. Applied Mechanics And Materials, 761. pp. 571-575. ISSN 1662-7482

Effendi, Mohamad (2007) Lean Manufacturing Implementation : A study On The Development Of Key Performance Indicators (KPIs) At An Aerospace Manufacturing Company. Masters thesis, Coventry University.

Effendi, Mohamad and Adi, Saptari and Rohana, Abdullah (2008) Productivity Improvement: A Case Study At A Communication Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Effendi, Mohamad (2009) BMFP 4523: Pembuatan Lean (Lean Manufacturing). [Teaching Resource]

Effendi, Mohamad (2010) BMFP 4523: Pembuatan Lean (Lean Manufacturing). [Teaching Resource]

Effendi, Mohamad (2008) BMFP 4553: Pengurusan Sumber Manusia (Human Resource Management). [Teaching Resource]

Effendi, Mohamad (2009) BMFP 4573: Undang-Undang Industri Dan OSHA (Industrial Law And OCHA). [Teaching Resource]

Elma Zulaika , Ab Manaf (2015) The study on customer satisfaction of public transport in Melaka by using service quality dimensions : a case study of Panorama Melaka. Project Report. UTeM. (Submitted)

Elvie Rosmieza, Mohd Zawawi (2006) Improve Manufacturing Process By Using Line Balancing To Reduce Cycle Time. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Emilia Shander, Andrew Abe (2007) Control Heating Of Small Forging Using Oxy-Acetylene Flame. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Enda Nur Malia , Ngah Deman (2009) Root Cause Analysis Of Core Pin Quality Problem Using Cause And Effect Diagram. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eng , Sze Yee (2007) The Manufacturing Process Of Robo-Kidz-Toe. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Erni Zahani, Buyong (2005) The Investigation Of MIG Welding Parameter Effects On Welding Of Dissimilar Metal (Stainless Steel To Cast Iron). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ervie, Gireen (2006) Quality Management System In Higher Education - A Study On ISO 9001:2000 Implementation At KUTKM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eswari Devi , Ramachandran (2014) Productivity improvement : preventive actions for hard defect failure reduction at hard disk drive assembly process. Masters thesis, UTeM.

F

Fadzil , Che Man (2013) Development Of Automated-Guided Vehicle For 300kg Trolley Towing Application. Project Report. UTeM, Melaka. (Submitted)

Fadzli, Nurul Shahira Farhana (2017) Effect Of Acetone Vapor On Mechanical Properties Of Fused Deposition Modeling Printed Part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fairul Azhar , Nasri (2008) Automatic Cable Stripper. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Faisal Faris, Rahim (2012) Optimization Of Mixing Parameters To Produce PP - Enr Blend Via Response Surface Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fara Nadia, Mohd Rafiq (2015) Design Of Pneumatic Gripper For Comau Articulated Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhan, Ahmad Fuad (2012) The Implementation Of Design For Reliability In Product Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhani, Mohamad (2008) Design And Fabrication Of Bollard Light Using Modern Product Development Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhani, Mohamad (2008) Design and fabrication of bollard light using modern product development process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fathullah Farid , Zakaria (2011) Design And Develop An Eco Fly Killer In UTeM's Cafeteria. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatihah Ros , Ahmad and Seri Rahayu , Kamat and Ahmad Yusairi, Bani Hashim (2014) Fatigue on upper quadrant human body: the psychophysical experience among drivers. In: International Con Current Design and Engineering (iDECON 2014), 20 and 21 Sepetmebr 2014, Melaka.

Fauzatulhamla, Mohd Salleh (2007) Downtime System (DTS) For Press Shop Department. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fevilia Nurnadia, Andria Syaifoel (2012) The Gap Analysis Measurement Of Linear Vs Non-Linear Parametric On Costemer Satification Based On Importance Performance Analysis And Kano Method In Service Industries(Hotel). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fevilia Nurnadia , Adria Syaifoel (2014) Structural model of customer satisfaction using the integration of kansei engineering and kano method. Masters thesis, UTeM.

Fleschutz, Timo and Abdul Rahman, Azrul Azwan and Harms, Robert and Seliger, Günther (2010) Assessment of Life Cycle Impacts and Integrated Evaluation Concept for Equipment Investment. In: 17th CIRP International Conference on Life Cycle Engineering (LCE 2010), 19-21 May 2010, Hefei, Republic of China.

Foo , Chi Huie (2014) DMAIC method application top reduce contamination in hard disk drive. Masters thesis, UTeM.

Foong , Weng Kang (2008) Application Of Inventory Model In Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

G

Gan, Sin Yi (2013) Development Of A Simulation-Based Decision Support Model For High Precision Component Manufacturer. Masters thesis, Universiti Teknikal Malaysia Melaka.

Goh, Meryin (2011) Developing A Methodology For Productivity Improvement In A Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh , Hooi Fen (2010) Real Time Medical Inventory Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh , Lirong (2007) Inventory Management System Using Distributed System Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gue, Sey Yang (2015) Design Analysis Of A Children’s Scooter Using DFMA (Boothroyd Dewhurst) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

H Haery, IP (2010) BMFP 4512: Pengurusan Industri Dan Kos (Industrial Management And Cost). [Teaching Resource]

H Haery, IP (2010) BMFP 4513: Perancangan & Kawalan Pengeluaran (Production Planning & Control). [Teaching Resource]

H Haery, IP (2010) BMFP 4542: Pengurusan Projek (Project Management). [Teaching Resource]

H Haery, IP (2010) BMFS 3313: Simulasi Sistem Pengeluaran (Simulation In Production System). [Teaching Resource]

Hadzlin, Nur Nabilah (2017) A Study On Profile Design Of Scarves That Can Influence The Aesthetic Value And Product Evaluation Using Kano Model Method And IPA. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hafiziana , Othman (2008) Autonomous Maintenance Programme For Drilling Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hairus Saleh, Riduan (2017) Optimization Parameter And Mechanical Properties For Aluminium 5052-H32 By Multi-Passes Butt Joint Using Friction Stir Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halim, Asmira (2017) Sustainable Design Manufacturing To The Needs Of Industry 4.0. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halis, Hanifi (2012) Productiviti Improvement In Manufacturing Industry. Project Report. UTeM, Melaka< Malaysia. (Submitted)

Hambali, Arif and Ab. Rahman , Mahmood and Isa, Halim (2013) The Use OF Analytical Hierarchy Process (AHP) In Product Development Process. In: International Symposium on the Analytic Hierarchy Process 2013, 23 - 26 June 2013, Hotel Istana, Kuala Lumpur, Malaysia.

Hambali, Boejang (2005) Customised All-Ceramic Dental Restoration : The Design And Manufacturing Process Flow. Masters thesis, De Montfront University.

Hambali, Arep & Ariff (2010) BMFR 4143: Rekabentuk Pembuatan Dan Pemasangan (Design For Manufacturing & Assembly). [Teaching Resource]

Hambali, Arep & Ariff (2011) MMFU5013: Kelestarian Rekabentuk Produk Dan Pembuatan. [Teaching Resource]

Hamdan, Siti Nur Raheena (2016) Investigation Of Surface Integrity When Machining AISI 1045 Using Uncoated Carbide Cutting Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamid, Nor Nadiah Abdul and Mohamad, Noraiham and Hing, Lum Yip and Dimin, Mohd Fairuz and Azam, Mohd Asyadi and Hassan, Mohd Haneesyah Che and Mustaq, Mohd Khairul Shahril and Ahmad, Azizah Shaaban (2013) The effect of chitosan content to physical and degradation properties of biodegradable urea fertilizer. Journal of Scientific and Innovative Research, 2 (5). pp. 893-902. ISSN 2230-4818

Hanafi, Norshazwana Akmal (2013) ID defect minimization in glass substrate industry. Masters thesis, UTeM.

Hareshwara Ruban , Subramaniam (2013) Modelling For Prediction And Optimization Of Mechanical Response Of Unequal Thickness Steel Sheet Resistance Spot Welds In Tensile-Shear Loading Condition. Project Report. UTeM, Melaka. (Submitted)

Haron, Khairul Anwar (2008) Lead Time Improvement By Re - Layout At Aerospace Company (Ctrm Aero Composite Sdn Bhd). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haroon, Hazura and Abdul Razak, Hanim and Khalid, Siti Sarah and N., Nadia and A., Aziz (2017) On The Effectiveness Of Taguchi Method In Optimizing The Performance Of Parallel Cascaded MRR Array (PCMRRA). Optoelectronics And Advanced Materials – Rapid Communications, 11 (7-8). pp. 393-397. ISSN 1842-6573

Hartini, Zulkefli (2015) The Profile Design (Image) Towards Customer Emotional Responses. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haryatie , Samsuri (2009) Investigation Of Plate Welding Quality By Robot Welding Using Nondestructive Technique. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hasan, Muhammad Syahid and Ebrahim, Zuhriah and Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam (2017) Decision Support System Classification And Its Application In Manufacturing Sector: A Review. Jurnal Teknologi, 79 (1). pp. 153-163. ISSN 0127-9696

Hasan, Muhammad Syahid and Ebrahim, Zuhriah and Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam (2017) Sustainable-ERP System: A Preliminary Study On Sustainability Indicators. Journal Of Advanced Manufacturing Technology, 11 (1). pp. 61-73. ISSN 1985-3157

Hasan, Rafidah (2006) Development of superplastic boronizing using duplex stainless steel. Masters thesis, University of Malaya.

Hasan Basari, Abd Samad and Razali, Hazlina and Hussin, Burairah and Asmai, Siti Azirah and Ibrahim, Nuzulha Khilwani and Shibghatullah, Abdul Samad (2014) Markovian Approach Enhancement To Simplify Optimal Mean Estimation. Applied Mathematical Sciences, 8 (111). pp. 5507-5516. ISSN 1314-7552

Hasbullah, Ashari (2008) The Alignment Of Competitive Priorities, Process Structure, And Information Technology And Its Effect On Firm Performance : A Study Of Malaysian Manufacturing Firms. PhD thesis, Universiti Teknikal Malaysia Melaka.

Hasbullah, Nor Wahida (2016) Waste Reduction In Healthcare Department By Implementing Value Stream Mapping Technique. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hashim, Hanizam and Md Nizam, Abd Rahman and Noraiham, Mohamad and Khairul Anuar, Abd Rahman (2013) The Effect of Pulse DC and DC Substrate Bias during In Situ Cleaning PVD Process on Surface Roughness. The Effect of Pulse DC and DC Substrate Bias during In Situ Cleaning PVD Process on Surface Roughness, 53 (20 (10.101). pp. 562-568. ISSN 1877-7058

Hashim, Norlezah and Idris, Fakrulradzi and Abu Talib, Noraini (2011) A Study Of Technology Acceptance Model (Tam) Towards Continuous Professional Development (Cpd). In: International Conference on Lifelong Learning 2011 (ICLLL2011) , 14-15 November 2011, Seri Pacific Hotel, Kuala Lumpur . (Submitted)

Hasoloan Haery, Ian Pieter (2008) BMFP 3582: Ekonomi Pembuatan (Manufacturing Economy). [Teaching Resource]

Hasoloan Haery, Ian Pieter (2008) DMFD 3513: Pengurusan Pembuatan (Manufacturing Management). [Teaching Resource]

Hasoloan Haery, Ian Pieter and Mohd Yuhazri, Yaakob and Puvanasvaran, A. Perumal (2011) Developing A Cost Modeling Of Value Stream Mapping To Optimize Production System Operations By Using Graphical User Interface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasoloan Haery, Ian Pieter and Muhammad Yuhazri, Yaakob (2013) Developing A Function Deployment And Tool For Employees And Product Quality Satisfacti Through Kano Method And Herzberg Theory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasoloan Haery, Ian Pieter (2009) BMFP 4512: Pengurusan Industri Dan Kos (Industrial Management & Cost). [Teaching Resource]

Hassanul Sazali , Ahmaddin (2007) Development Of CIM Control System Using PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazura, Haroon and Fauziyah , Salehuddin and Niza, Mohd Idris (2007) Smart Laboratory Inventory Management (Slim) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hee, Wee Kiat (2015) Design Of Automatic Metal Strips Pallet Stacker For Slitting Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Herman, Md Azhari (2005) Design And Implementation Of Gripper And Robot Arm (Hardware Development). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hidayatullah , Musa (2008) Study The Process Of Total Preventive Maintenance (TPM) Of Injection Moulding Machine Arbug 420C. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hj Wan Zainul Abidin, Wan Nur Shuhada Annis (2017) Design And Develop A Stair Climber Trolley. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ho, Chee Huay (2016) Lean manufacturing and OEE optimization of semiconductor industry through scheduled downtime reduction at testing process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ho, Kam Yuen (2015) Optimization Of FDM Parameters With Taguchi Method For Production Of Flexible ABS Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hoe, Li Sim (2010) Design And Analysis Of Casting Mold Using CAD Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hon, Yeen Seong (2009) Microprocessor Based Dot Matrix LED Display System For Pedestrian Light. Project Report. UTeM, Melaka, Malaysia. (Submitted)

How, Whee Ching (2017) Hybrid POLCA In A Job Shop Environment. Masters thesis, Universiti Teknikal Malaysia Melaka.

How, Whee Ching (2014) Tool for mapping manufacturing critical-path time in job shop environment. Project Report. UTeM. (Submitted)

Huong, Yu Chung (2015) Design Of Remote System Configuration Framework In Manufacturing Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Husin, Nur Aqilah (2016) To Study The Development Of Reverse Engineering Technology That Using Common Consumer Electronic Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hussein, Nur Izan Syahriah and Ayof, Mohd Nizam and Abdullah, Abu and Abu Bakar, Mohd Hadzley and Shamsuri, Siti Rahmah and Othman, Md Nazri (2017) Effect Of Deposition Process On Properties Of Nickel-Based Aloy Clad On Cast Iron Trim Cutter Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hussein, Sadiq Aziz (2016) The Process Parameter Effects On Hybrid Structure Of Dissimilar Materials Made By Friction Stir Welding. PhD thesis, Universiti Teknikal Malaysia Melaka.

I

I. Tanaya, Prianggada (2005) BMFA 3423: Control System Design. [Teaching Resource]

I. Tanaya, Prianggada (2005) BMFA 3433: Artificial Intelligent. [Teaching Resource]

I. Tanaya, Prianggada (2004) BMFS 3373: CNC Technology. [Teaching Resource]

Ian Peter, Hasoloan Haery (2009) BMFP 4512: Pengurusan Industri Dan Kos (Industrial Management And Cost). [Teaching Resource]

Ibrahim, Abdiwahab Abshir (2016) Development Of A New Environmental Framework For Manual Wheelchair Using Analytical Hierarchy Process (Ahp) In Product Development. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ibrahim, Mohamad Amran (2017) Enhancement Of Lean Manufacturing Implementation Based On Decision Support System Using Simulation And Intelligent Agent. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ibrahim, Siti Athirah Raihan (2016) Rear And Side Under Carriage Safety Bars For Malaysia Heavy Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ibrahim, Siti Nur Ailisa (2017) Determination Of Clearance For The Design Of Bending Die For Looping A Cable Stayed Support Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ida Laila , Bakhtiar (2013) DFMA Analysis Of A Water Tank Cleaning Robot. Project Report. UTeM, Melaka. (Submitted)

Ilime, Muhammad Iqbal (2016) Temperature Monitoring Of Water Pump Relative To The Effect Of Flowrate In Pipeline. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ilyana , Abdullah (2008) Autonomous Maintenance Programme On Grinding Machine For Job Base. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Intan Fatihah , Ahmad (2012) Impact Of Meeting Quality And Delivery On Customer Satisfaction For A Metal Based Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Intan Sharhida, Othman (2006) BMFB 2212: Bahan Kejuruteraan. [Teaching Resource]

Intan Sharhida, Othman (2008) BMFB 2213: Bahan Kejuruteraan (Engineering Materials). [Teaching Resource]

Irwan, Taib (2006) Line Balancing Optimization For Single Model Assembly Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Irwan , Mohamad Halim (2006) Simulation Modeling And Optimization In Manufacturing Case Study Shop Floor. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Isa, Halim (2011) Analysis of Time-to-Fatigue for Standing Jobs in Metal Stamping Industry. In: 2011 International Conference on Manufacturing and Industrial Engineering (ICMIE2011), 22 - 24 February 2011, Haikou, China..

Isa, Halim (2011) Correlation Between Job Satisfaction Level and Workstation Design: A Survey at Malaysian Automotive Industry. The Journal of the Institution of Engineers, Malaysia, 72 (2). pp. 49-54. ISSN 0126-513X

Isa, Halim (2007) Ergonomic Intervention in Malaysian Small and Medium Industries. In: International Ergonomics Conference Humanizing Work and Work Environment, 10 - 12 December 2007, Bhopal, India.

Isa, Halim (2006) Ergonomics Analysis of Muscle Activity of Workers in a Metal Stamping Industry. Scientific Research Journal, 3 (2). pp. 31-43. ISSN 1675-7009

Isa, Halim (2012) Modelling and Optimization Approach of Quantitative Environmental Ergonomics in Malaysian Automotive Industry. Journal of Occupational Safety and Health, 9 (1). pp. 7-13. ISSN 1675-5456

Isa, Halim (2012) Preliminary Investigations on the Reduction of Foot Pressure Measurement and Muscle Activity with Different Insole Materials. Advanced Materials Research, 576. pp. 695-699. ISSN 1662-8985

Isa, Halim (2010) QUEST Simulation Analysis for Facility Layout Redesign of Handwork Area. In: World Engineering Congress 2010, 02 - 05 August 2010, Kuching, Sarawak..

Isa, Halim and Adi , Saptari and Seri Rahayu , Kamat and Wan Hasrulnizzam , Wan Mahmood (2007) Assessment of Workstation Design for Safe Working Posture at Plug Assembly Line. In: International Conference on Engineering and ICT (27-28 November 2007) Organized by Universiti Teknikal Malaysia Melaka., 27-28 November 2007, Hotel Equatorial Melaka.

Isa, Halim and Al Amin, Mohamed Sultan and Seri Rahayu , Kamat and Rohana, Abdullah (2012) Muscle Activity while Standing for Prolonged Time Periods in Metal Stamping Industry. In: International Conference on Design and Concurrent Engineering, 15-16 Okt 2012, Bandar Melaka, Melaka.

Isa, Halim and Noor Rawaida , Omar and Kamat, Seri Rahayu and Abdullah, Rohana and Saptari, Adi and Mohd Shahrizan, Othman (2014) Analysis of Muscle Activity using Surface Electromyography for Muscle Performance in Manual Lifting Task. Applied Mechanics and Materials, 564. pp. 644-649. ISSN 1660-9336

Isa, Halim and Rohana, Abdullah (2008) Assessment of Thermal Comfort at Classroom Environment: Subjective Measurement vs. Direct Technical Measurement. In: International Conference on Environment (ICENV 2008)., 15 - 17 December 2008, Penang, Malaysia..

Isa, Halim and Rohana, Abdullah (2012) A Survey on Work-related Musculoskeletal Disorders (WMSDs)among Construction Workers. Journal of Occupational Safety and Health, 9 (1). pp. 15-19. ISSN 1675-5456

Isa, Halim and Seri Rahayu , Kamat and Abdullah, Rohana and Hambali, Arif and Ab. Rahman , Mahmood (2013) Electromyography Analysis associated with Prolonged Standing In Metal Stamping Industry. Journal of Advanced Manufacturing Technology (JAMT) . pp. 15-26. ISSN 1985-3157

Isa, Halim (2010) Analysis of Muscle Fatigue During Prolonged Standing Jobs in Manufacturing Industry Utilizing Ergonomics Assessment. In: World Engineering Congress, 2 - 5 December 2010, Kuching, Sarawak.

Isa, Halim (2010) Assimilating Quality Function Deployment (QFD) with QUEST® Analysis for Facility Layout Redesign of Handwork Section. In: 2010 International Conference on Science and Social Research (CSSR 2010), 05 - 07 December 2010, Kuala Lumpur.

Isa, Halim (2007) BMFP 4593: Ergonomik Industri (Industrial Ergomomics). [Teaching Resource]

Isa, Halim (2008) BMFP 4593: Ergonomik Industri (Industrial Ergonomics). [Teaching Resource]

Isa, Halim (2011) Correlation between Psychological Fatigue and Muscle Fatigue associated with Prolonged Standing. In: Asia Pacific Symposium on Advancement in Ergonomics and Safety, 5 - 6 December 2011, Kangar, Perlis..

Isa, Halim (2011) Development of a Questionnaire for Prolonged Standing Jobs at Manufacturing Industry. In: Advances in Human Factors, Ergonomics, and Safety in Manufacturing and Service Industry. CRC Press Taylor & Francis Group, Boca Raton, Florida, USA., pp. 253-263. ISBN 978-1-4398-3499-2

Isa, Halim (2010) Development of a Questionnaire for Prolonged Standing Jobs at Manufacturing Industry. In: Third International Conference on Applied Human Factors and Ergonomics (AHFE), 17-20 July 2010, Miami, Florida, USA..

Isa, Halim (2011) The Effect of Safety Shoe Insole Material on Subjects due to Prolonged Standing. Malaysian Journal of Ergonomics. pp. 11-20. ISSN 2232-1101

Isa, Halim (2011) The Effect of Safety Shoe Insole Material on Subjects due to Prolonged Standing. In: Asia Pasific Symposium on Advancement in Ergonomics and Safety, 5 - 6 December 2011, Kangar, Perlis..

Isa, Halim (2006) Ergonomic Intervention for Metal Stamping Process to Improve Occupational Health in Malaysian Small and Medium Industries (SMIs). In: International Conference on Technology and Operations Management 2006, 1 - 2 December 2006, Institut Teknologi Bandung, Indonesia.

Isa, Halim (2006) Ergonomic Workstation Design of Metal Stamping Process to Improve Occupational Health in Malaysian Small and Medium Industries (SMIs). In: International Symposium on Past, Present and Future Ergonomics, Occupational Safety and Health, 28 - 30 August 2006, Bali, Indonesia.

Isa, Halim (2009) Ergonomics Risk Factors at Manufacturing Industry: A Prelude Study. In: National Symposium on Advancements in Ergonomics and Safety (ERGOSYM 2009), 30 November - 2 December 2009, Kangar, Perlis..

Isa, Halim (2009) Improving Facility Layout Problems Using Quality Function Deployment (QFD) Approach. In: of International Conference for Technical Postgraduate 2009 (Techpos’09), 14 - 15 December 2009, Kuala Lumpur.

Isa, Halim (2011) Modeling of an Integrated Workstation Environment for Occupational Safety and Health Application. In: Advances in Ergonomics Modeling and Usability Evaluation. CRC Press Taylor & Francis Group, Boca Raton, Florida, USA., pp. 503-512. ISBN 978-1-4398-3503-6

Isa, Halim (2010) Modeling of an Integrated Workstation Environment for Occupational Safety and Health Application. In: Third International Conference on Applied Human Factors and Ergonomics 2010 (AHFE 2010), 17-20 July 2010, Miami, Florida, USA..

Isa, Halim (2011) Prolonged Standing Strain Index (PSSI): A Proposed Method to Quantify Risk Level of Standing Jobs in Industrial Workplaces. In: 2011 International Conference on Manufacturing and Industrial Engineering (ICMIE2011), 22 - 24 February 2011, Haikou, China..

Isa, Halim and Adi , Saptari and Seri Rahayu , Kamat and Rohana, Abdullah and Nor Akramin, Mohamad (2007) Measurement of Thermal Comfort at Working Environment in Manufacturing Industry. In: International Conference on Ergonomics (ICE 2007), 3 - 5 December 2007, Kuala Lumpur.

Isa, Halim and Hambali, A and Kamat, Seri Rahayu and Abdullah, Rohana (2014) Development of a Decision Support System for Analysis and Solutions of Prolonged Standing in the Workplace. Safety and Health at Work, 5. pp. 97-105. ISSN 2093-7911

Isa, Halim and Mohamad Haidir, Maslan (2007) Assessment of Thermal Comfort Measurement in Working Environment of Malaysian Manufacturing Industry. In: Regional Symposium on Engineering Education 2007, 14 February 2007, University of Malaya, Kuala Lumpur.

Isa, Halim and Noor Rawaida , Omar and Syed Mohamed, Muhammad Syafiq and Rohana, Abdullah and Nuradilah , Zahari and Hafiz, Zani and Fatihah Ros , Ahmad (2014) Psychophysical experience and heart rate analysis in manual lifting task of Malaysian population. Applied Mechanics and Materials, 761 (-). pp. 659-663. ISSN 1662-7482

Isa, Halim and Wan , Fadhli (2009) Redesign of a hand pallet truck by integrating ergonomics analysis and quality function deployment. Asian Journal of Ergonomics, 9. pp. 109-121. ISSN 1345-9570

Isa , Halim (2010) Analysis of Muscle Fatigue associated with Prolonged Standing Tasks in Manufacturing Industry. In: 2010 International Conference on Science and Social Research (CSSR 2010), 05 - 07 December 2010, Kuala Lumpur.

Isa , Halim (2007) Ergonomics Intervention to Improve Occupational Health of Workers in Malaysian Metal Stamping Industry. In: International Engineering Convention, Federation of Engineering Institutions of Islamic Countries, 10 - 14 March 2007, Jeddah, Saudi Arabia..

Ishak, Nor Shwazni (2017) The Effect Of Cooling Slope Casting On Microstructure And Mechanical Properties Of A319 Alloy After Processed By Equal Channel Angular Pressing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Abu Shah (2008) BMFR 3143: Rekabentuk Alat Pengeluaran (Production Tool Design). [Teaching Resource]

Ismail, Abu Shah (2009) BMFR 3143: Rekabentuk Alat Pengeluaran (Production Tool Design). [Teaching Resource]

Ismail, Abu Shah (2009) BMFR 3153 / BMFR 4163: Analisis Kejuruteraan Berbantu Komputer (Computer Aided Engineering Analysis). [Teaching Resource]

Ismail, Abu Shah (2007) BMFR 4143: Reka Bentuk Pembuatan Dan Pemasangan. [Teaching Resource]

Ismail, Nor Shahirah (2016) Design And Development Of Table Napkin Folding Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail , Bolong (2009) Investigation On The Effect Of Heat Treatment On Fracture Toughness Of Pressure Vessel Steel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ismail , Ibrahim (2013) Motion And Time Study For Enhancing The Assembly Process At PHN Industry Sdn Bhd. Project Report. UTeM, Melaka. (Submitted)

Ismail , Abu Shah (2006) BMFR 4143: Rekabentuk Untuk Pembuatan. [Teaching Resource]

Iviana, Jiga (2015) Implementation Of Design For Manufacture And Assembly (DFMA) And Analytical Hierarchy Process (AHP) In Optimizing Conceptual Design Of Hand Tool Trolley. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzad Jauhari , Sarlan (2009) Stamping Oil Conditioning Monitoring At Miyazu Using FT-Ir : Water Peak Monitoring For Line J. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzati, Izman (2011) A Study On Decision Scenario Of Turnaround Days Of Preventive Maintenance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

J

J.A., Adnan and Minhat, Mohamad and Abd Rahman, Md Nizam (2012) Artificial Immune System (AIS) Algorithm For Optimizing Shear Zone Temperature In CNC Turning Operation. In: 2nd International Conference on Design and Concurrent Engineering, 15-16 October 2012, Equatorial Hotel, Melaka..

Jaafar Sidek, Mohd Ani (2005) Application Quality Function Deployment (QFD) On Manual Wheelchair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jahari, Nor Hidayah (2017) Tool Wear And Wear Progression Of Uncoated Carbide In Turning Titanium Alloy Ti-6AI-4V ELI Under Vegetable Oil Based Carbon Nano Fiber. Technical Report. UTeM, Melaka. (Submitted)

Jaiban, Floriena Erika (2017) Future Of Manufacturing : A Study On The Front-End Requirements Of Industrie 4.0 In Malaysia. Project Report. UTeM, Melaka. (Submitted)

Jali, Mohd Hafiz and Ahmad Izzuddin, Tarmizi and Ghazali, Rozaimi and Mustafa, Na Eisyah Sarah and Jaafar, Hazriq Izzuan and Sarkawi, Hafez (2015) System Identification Modeling Of Arm Rehabilitation Devices. Journal of Theoretical and Applied Information Technology, 81 (3). pp. 547-551. ISSN 1992-8645

Jallil, Nurul Amirah (2017) Design Of A Corner Chair To Ease The Daily Routine Of Cerebral Palsy Kids. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamaludin, Zamberi and Minhat, Mohamad (2014) Review on Cutting Force Compensation Techniques for Machine Tools Application. In: iDECON 2014 – International Conference on Design and Concurrent Engineering, 21 - 23 September 2014, Melaka.

Jamalulil, Nur Halimah (2016) Implementation Of Quick Response (QR) Code In Cloud Manufacturing (CM) Framework. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jamalussaid, Abdul Qahir Wahidi (2016) Establishment Of Standard Cycle Time And Production Target For The Manufacturing Of Telekom Malaysia Berhad (TM) Metal-Based Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jameel Abbas, Adnan and Minhat, Mohamad and Abd. Rahman, Md. Nizam (2013) Improvement Performance Characteristics of CNC Turning Operation by Exploit Immune System's Properties. In: 2nd International Conference on Computer Engineering and Mathematical Sciences (ICCEMS2013), 5-6 December 2013, Kuala Lumpur, Malaysia.

Jamilah, Mohd Jamil (2015) Quality Improvement Using Factorial Design: A Case Study In Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jani, Rahardjo (2015) Factors Influencing Implementation Of Advanced Manufacturing Technology In Malaysian And Indonesian Small And Medium Enterprises. PhD thesis, Universiti Teknikal Malaysia Melaka..

Jariah, Mohamad Juoi (2009) BMFB 4243: Bahan Seramik (Ceramic Materials). [Teaching Resource]

Jariah, Mohamad Juoi (2009) BMFB 4253 / BMFB 4243: Seramik Kejuruteraan (Engineering Ceramic). [Teaching Resource]

Jeefferie, Abd Razak (2009) DMFD 2823: Termodinamik (Thermodynamics). [Teaching Resource]

Jeefferie, Abd Razak (2009) BMFB 3243: Polimer Kejuruteraan (Engineering Polymer). [Teaching Resource]

Jeefferie, Abd Razak (2010) DMFD 2843: Termodinamik (Thermodynamics). [Teaching Resource]

John, Wong Huang Ung (2015) Development Of A Database To Support Sustainable Packaging Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Johny, Purnomo (2010) DMFG 3813: Sistem Pembuatan (Manufacturing System). [Teaching Resource]

Johny, Purnomo (2007) BMFG 1812: Pengenalan Kepada Kejuruteraan Pembuatan. [Teaching Resource]

Johny, Purnomo (2009) BMFG 4813: Sistem Pembuatan (Manufacturing System). [Teaching Resource]

Joseph, Sahaya Anand (2010) BMFB 4273: Semikonduktor (Semiconductor). [Teaching Resource]

Juari, Ab. Razak (2003) Development Of A Generic Step - Based Product Data Models In CIM Integration Framework For CAPP. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juhaini, Jabar and Claudine, Soosay (2010) Evaluating technology transfer and new product development in Malaysian manufacturers. In: Proceeding of the 24th Australia and New Zealand Academy of Management Conference: Managing Unknowable Future, 8 Dec - 10 Dec, Adelaide, Australia.

Juhaini, Jabar and Claudine, Soosay (2011) Evaluating technology transfer and the performance of manufacturing SMEs. In: Proceedings of the 25th Australia and New Zealand Academy of Management Conference: The Future of Work and Organisations, 7 Dec - 9 Dec, Wellington, New Zealand.

Juhaini, Jabar and Claudine, Soosay (2008) Strategic technology alliance in manufacturing firms: a conceptual paper. In: Proceedings of the 6th Australian and New Zealand Academy Management: Operations Supply Chain and Services Management Symposium , 8 June - 10 June, Gold Coast, Australia.

Juhaini, Jabar and Claudine, Soosay (2011) Strategic technology alliances, technology transfer and the performance of Malaysian manufacturers. In: Technical Universities International Conference on Engineering and Technology: Globalising Innovation for Sustainable Transformation , 13 Nov - 15 nov, Batu Pahat, Johor, Malaysia.

Juhaini, Jabar and Claudine, Soosay (2010) An assessment of technology transfer in Malaysian manufacturers and the impact on performance and innovativeness. In: Proceedings of the 5th IEEE International Conference on Management of Innovation and Technology, 2 June - 5 June, Singapore.

Juhaini, Jabar and Claudine, Soosay (2011) An evaluation of learning and innovation through strategic technology alliances in Malaysian manufacturers. In: Proceedings of the 10th International Research Conference on Quality Innovation and Knowledge Innovation, 15 Feb - 18 Feb, Kuala Lumpur, Malaysia.

Juhaini, Jabar and Claudine , Soosay (2012) Absorptive capacity, resources and alliances: Does technology transfer lead to enhanced manufacturing performance? In: The 10th ANZAM Operations, Supply Chain and Services Management, 14 June - 15 June, Melbourne, Australia.

Juhaini, Jabar (2012) Strategic technology alliances, technology transfer and the performance of Malaysian manufacturer. Journal of Engineering and Technology. pp. 69-98. ISSN 2180-3811

Juhaini, Jabar and Claudine, Soosay and Ricardo, Santa (2010) Organisational learning as an antecedent of technology transfer and new product development :A study of manufacturing firms in Malaysia. Journal of Manufacturing Technology Management. pp. 25-45. ISSN 1741-038X

Julie Aidah, Jusin (2012) Automated Guided Vehicle(AGV). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jumaidin, Ridhwan and Sapuan, S. M and Jawaid, Mohamad and Ishak, M. R and Sahari, Japar (2016) Characteristics of thermoplastic sugar palm Starch/Agar blend: Thermal, tensile, and physical properties. International Journal of Biological Macromolecules. pp. 575-581. ISSN 0141-8130

Jumaidin, Ridhwan and Sapuan, S. M and Jawaid, Mohamad and Ishak, M. R and Sahari, Japar (2017) Effect of seaweed on mechanical, thermal, and biodegradation properties of thermoplastic sugar palm starch/agar composites. International Journal of Biological Macromolecules. pp. 265-273. ISSN 0141-8130

Jumaidin, Ridhwan and Sapuan, S. M and Jawaid, Mohamad and Ishak, M. R and Sahari, Japar (2016) Effect of seaweed on physical properties of thermoplastic sugar palm starch/agar composites. Journal of Mechanical Engineering and Sciences (JMES). pp. 2214-2225. ISSN 2289-4659

Jumaidin, Ridhwan and Sapuan, S.M and Jawaid, Mohamad and Ishak, M. R and Japar, Sahari (2017) Thermal, mechanical, and physical properties of seaweed/sugar palm fibre reinforced thermoplastic sugar palm Starch/Agar hybrid composites. International Journal of Biological Macromolecules. pp. 606-615. ISSN 0141-8130

Jumaidin, Ridhwan and Sapuan, S.M and Jawaid, Mohamad and Ishak, M. R and Sahari, Japar (2017) Effect of Agar on Flexural, Impact, and Thermogravimetric Properties of Thermo- plastic Sugar Palm Starch. Current Organic Synthesis. pp. 200-205. ISSN 1570-1794

Junid , Ramli and ABD RAZAK , JEEFFERIE and Mahat, Mohd Muzamir (2011) The Effects of Photoinitiator Addition to the Mechanical and Physical Properties of the Epoxy and Vynil Ester Fiber Glass Laminated Composites. International Journal of Applied Science and Technology, 1 (03). pp. 74-79. ISSN 2221-0997

Junid , Ramli and Abd Salam, Hadi and ABD RAZAK , JEEFFERIE and Mahat, Mohd Muzamir (2010) A Preliminary Study on the Effects of Photoinitiator and UV Curing Exposure Time to the Mechanical and Physical Properties of the Epoxy and Vynil Ester Fiber Glass Laminated Composites. International Journal of Engineering and Technology (IJET), 10 (06). pp. 14-20. ISSN 0975-4024

K

Kamaruddin, Mohammad Aizrulshah (2017) Additive Manufacturing In Medical Application,A Comparative Study Between Conventionally Made Prosthesis (Pylon) And Fused Deposition Modelling Prosthesis (Pylon). Masters thesis, Universiti Teknikal Malaysia Melaka.

Kamarul Ariffin , Abas (2007) Sistem Pengawasan Kualiti Kuasa Tiga Fasa. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamat, Seri Rahayu and Isa, Halim and Hui Hui, Yee (2014) Effect of Working Posture and Hand Grip for Carpal Tunnel Syndrome among Aerospace Workers. International Journal of Mechanical & Mechatronics Engineering , 14 (No:01). pp. 1-6. ISSN 2077-124X (online) 2227-2771 (Print)

Kamat, Seri Rahayu and Norhidayah, Hashim and Mohd Shahrizan, Othman (2013) A Study on Muscle Fatigue Associated with Awkward Posture among Workers in Aerospace Industry. Advanced Materials Research Journal, 10. pp. 287-292. ISSN 1022-6680

Kamat, Seri Rahayu and Yoxall, Alaster (2010) A Kinematics Study Part1: Hand and Finger Movements During Typical Cleaning Activities. In: VIII International Conference on Occupational Risk Prevention May 5th to 7th. Valencia, Spain, 5th to 7yh May 2010, Valencia Spain .

Kamat, Seri Rahayu (2012) Strength Capabilities and Subjective Limit of Repetitive Manual Insertion Task. Scottish Journal of Arts, Social Sciences and Scientific Studies, 1 (6). pp. 2047-1278. ISSN 2047 - 1278

Kamat, Seri Rahayu and Mahmood, Noor Shakir and Ajmi, Ahmed Ali (2016) Review And Establishing Framework Model To An Adoption Of ISO 50001 Energy Management System In Power Stations. Journal of Advanced Manufacturing Technology (JAMT) , 10 (2). pp. 67-78. ISSN 1985-3157

Kamsani, Silah Hayati (2009) BMFA 2413: Sistem Kawalan (Control System). [Teaching Resource]

Kanchymalay, K and Arif, F. and Hashim, U. R. and Amirrudin, S. (2011) ERP Implementation Assessment in the Manufacturing Industries. In: 2nd Annual Conference on Software Engineering and Application 2011, 12-13 December 2011, Singapore 2011.

Kanchymalay, kasturi and Amiruddin, Syuria and Salam, Sazilah and Hashim, Ummi Rabaah (2013) The Extent of ERP Customization towards User Satisfaction in Daily Operation for Manufacturing Companies. Journal of Computes, 8 (7). pp. 7888-7892. ISSN ISSN 1796-203X

Karuppiah, K.Vasanthan (2016) Improving OEE Data Quality By Automated Data Collection Through Identifying Productivity Potentials. Masters thesis, Universiti Teknikal Malaysia Melaka.

Kasim, Mohd Shahir (2014) Investigation on Wear Behavior and Chip Formation During Up-Milling and Down-Milling Operations for Inconel 718. Jurnal Teknologi (Sciences and Engineering), 66 (3). pp. 15-21. ISSN 21803722

Kasim, Mohd Shahir (2014) Modeling and Multi-response Optimization on WEDM Ti6Al4V. Applied Mechanics and Materials, 510. pp. 123-129. ISSN 1660-9336

Kasim, Mohd Shahir (2013) Surface Integrity of Newly Developed of Alsi/AlN Metal Matrix Composite during End Milling Under Dry Cutting Conditions. Research Journal of Applied Sciences, Engineering and Technology, 6 (6). pp. 1129-1134. ISSN 2040-7467

Kasim, Mohd Shahir and Raja, Izamshah and Md Ali, Mohd Amran and Abdul Aziz, Mohd Sanusi and Mohd Abid, Mohd Asyadi 'Azam and Che Haron, Che Hassan and A.G., Jaharah (2014) The influence of cutting parameter on heat generation in high-speed milling Inconel 718 under MQL condition. Journal of Scientific & Industrial Research (JSIR), 73 (1). pp. 62-65. ISSN 0975-1084 (Online); 0022-4456 (Print)

Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2013) Cutting Performances of Coated PVD in High Speed End Milling of Aged Inconel 718. Materials Science Forum, 773-774. pp. 653-660. ISSN 1662-9752

Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2013) PREDICTION SURFACE ROUGHNESS IN HIGH-SPEED MILLING OF INCONEL 718 UNDER MQL USING RSM METHOD. Middle-East Journal of Science Research, 13 (3). pp. 264-272. ISSN 1990-9233

Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Mohamad, Effendi and Abu Bakar, Mohd Hadzley and Minhat, Mohamad (2014) Analysis of Tool Performance during Ball-end Milling of Aluminium Alloy 6061-T6. In: iDECON 2014 – International Conference on Design and Concurrent Engineering, 21 - 23 September 2014, Melaka.

Kasim, Mohd Shahir (2013) Comparison between Taguchi Method and Response Surface Methodology (RSM) In Optimizing Machining Condition. In: UNSPECIFIED.

Kasim, Mohd Shahir (2013) Comparison between up-milling and down-milling operations on tool wear in milling Inconel 718. Procedia Engineering, 68. pp. 647-653. ISSN 18777058

Kasim, Mohd Shahir and Che Haron, Che Hassan and Abdul Ghani, Jaharah and Mohamad, Effendi and Raja, Izamshah and Md Ali, Mohd Amran and Saedon, Juri (2014) Multi-objective optimization using Box-Behnken of response surface methodology for high-speed machining of Inconel 718. Applied Mechanics and Materials, 629. pp. 487-492. ISSN 1662-7482

Kasim, Mohd Shahir and Che Haron, Che Hassan and Abdul Ghani, Jaharah and Sulaiman, Mohd Amri and Mohamad, Effendi and Mohamad, Minhat and Mohd, Hadzley and Saedon, Juri and Atan, Mohamad Hazizan (2015) Analysis of tool performance during ball-end milling of aluminium alloy 6061-T6. Applied Mechanics and Materials, 761. pp. 318-323. ISSN 1662-7482

Kasim, Mohd Shahir and Mohd Zahudi, Mohd Sufri and Che Haron, Che Hassan and Abdul Ghani, Jaharah and Raja, Izamshah and Mohd Isa, Mohd Hanafiah and Saedon, Juri and Roni Sahroni, Taufik and Ito, Teruaki (2014) The effect of wedm cutting parameter on inconel 718 subsurface microhardness. Journal of Advanced Manufacturing Technology, 8 (2). pp. 51-59. ISSN 1985-3157

Kasim, Mohd Shahir and Raja, Izamshah and Joseph Sahaya Anand, T and Zakaria, Nor Fakhriah (2015) Modeling and optimization of cutting parameter during Wire-EDM of Inconel 718 using response surface. In: JSME Manufacturing Systems Division Conference 2015, 16 March 2015, Keio University, Yokohama.

Kasim, Mohd Shahir and Raja, Izamshah and Mohamad, Minhat and Mohamad, Noraiham and Che Haron, Che Hassan and A.G., Jaharah and Saedon, Juri and Saad, Nor Hayati and Mohamed, Saiful Bahri (2014) Prediction of cutting force in end milling of Inconel 718. Journal of Engineering and Technology (JET), 5 (2). pp. 63-70. ISSN 2180-3811

Kasim, Mohd Shahir and Salleh, Mohd Rizal and Abd Rahman, Ammar and Abd Rahim, Nurul Hidayah (2008) An Investigation of the Impact of Cylindrical Grinding Parameters on Surface Roughness. In: National Conference on Design & Concurrent Engineering, 28-29th October 2008, Melaka.

Kasim, Mohd Shahir and Salleh, Mohd Rizal and Sivarao, Subramonian (2008) Experimental Investigation of Significance Parameters in Surface Grinding – Quality Evaluation. In: National Conference on Design & Concurrent Engineering, 28-29 October 2008, Melaka.

Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2011) Surface Integrity of Inconel 718 under MQL condition. Advanced Materials Research, 150-15. 1667 -1672. ISSN 1022-6680

Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2010) TOOL LIFE INVESTIGATION IN DRY TURNING OF INCONEL 718 WITH PVD TiAlN-COATED WC INSERT. In: Conference on Engineering and Technology Education, 2nd – 5th August 2010, Kuching, Sarawak.

Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2013) Wear mechanism and notch wear location prediction model in ball nose end milling of Inconel 718. Wear, 302 (1-2). pp. 1171-1179. ISSN 0043-1648

Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Che Hassan, Che Haron and A.G., Jaharah and A.I, Gusri and Abdul Yazid, Mohd Zaid (2013) Tool Life of TiAlN PVD Coated Carbide Tool in High-speed End Milling of Untreated Inconel 718 under Minimum Quantity Lubrication Condition. Sains Malaysiana, 42 (12). pp. 1721-1726. ISSN 0126-6039

Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Md. Ali, Mohd Amran and Abdul Aziz, Mohd Sanusi and Mohamad, Noraiham and Raja, Izamshah (2013) Prediction of Cutting Force in End Milling of Inconel 718. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET), 3-4 December 2013, Kuantan, Pahang. (Submitted)

Kasim, Mohd Shahir and Sulaiman, Mohd Amri and RAJA ABDULLAH, RAJA IZAMSHAH (2013) Assessment of environmental friendly application of biodegradable MQL coolant in end milling of Inconel 718. In: 16th Conference of the European Roundtable on Sustainable Consumption and Production (ERSCP), 4-7 June 2013, Istanbul, Turki.

Ke Sin , Lim (2014) WIP control at end of line of semiconductor industry using CONWIP. Masters thesis, UTeM.

Kee, Kai Hung (2016) Redesign Of Polar Cutting Workstation In Paper Cups Manufacturing Industry Using Ergonomics Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kee, Wan Xuan (2016) Monte Carlo Simulation Based Optimization For Product Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kejanindran, Govindarajoo (2012) Comparison On The Microstructure And Hardness Of GTA Welding And GMA Welding Of Dual Phase Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kek, Zi Xiangg (2017) Improving Stock Record Accuracy Using Mobile Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Keng, Swee Hau (2007) The Significant Of Total Preventive Maintenance Implementation–Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairol Anuar, Rakiman (2006) BMFA 3413: Pengenalan Kepada Robot. [Teaching Resource]

Khairol Anuar, Rakiman (2009) BMFA 2443: Kuasa Bendalir (Fluid Power). [Teaching Resource]

Khairol Anuar, Rakiman (2009) BMFA 2453: Pengenalan Kepada Robot (Introduction To Robotics). [Teaching Resource]

Khairol Anuar, Rakiman (2010) BMFA 2453: Pengenalan Kepada Robot (Introduction To Robotics). [Teaching Resource]

Khairol Anuar, Rakiman (2007) BMFA 3413: Pengenalan Kepada Robot (Introduction To Robotic). [Teaching Resource]

Khairol Anuar, Rakiman (2009) DMFD 3413: Kuasa Bendalir (Fluid Power). [Teaching Resource]

Khairol Anuar, Rakiman (2010) DMFD 3413: Kuasa Bendalir (Fluid Power). [Teaching Resource]

Khairol Anuar, Rakiman and Rosidah, Jaafar (2004) BMFS 3373: Teknologi CNC. [Teaching Resource]

Khairol Anuar , Rakiman (2006) BMFG 1823: Statik Dan Kekuatan Bahan. [Teaching Resource]

Khairul Aidil, Nordin (2010) Design And Analysis Of Optical Mouse Using Boothroyd Dewhurst DFMA Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Akma, Omar (2015) Study On Physical Form Of Consumer Products In Product Designing Towards Brand Recognition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Azam, Buhari (2008) Productivity Improvement Through Line Balancing Method In Aerospace Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Fadzli, Samad (2010) DMFD 2823: Statik & Dinamik (Statics & Dynamics). [Teaching Resource]

Khairul Hazwan , Mohd Rasit (2015) Structural design and analysis of autonomous guided vehicle (AGV) for parts supply. Project Report. UTeM. (Submitted)

Khairul Izani , Mohd Zukee (2014) Effect of chemicals surface treatment of PVD TiN coated WC on the coating adhesion. Masters thesis, UTeM.

Khairul Nazemin, Mohd Yaaziz (2015) Integration Kano Model And Quality Function Deployment (QFD) Application For Design Improvement Of An Accessories Product Case Study: Umbrella. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairulazdan, Nur Khairunisya (2016) Study And Analysis Of Cognitive Style Towards The Affective Design In Kansei Engineering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khalid Husseine , Tuah (2006) Electromagnet Torch Light Design And Development. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Khalilah, Khalid (2015) The Development Of Newly Design Arrow For Slingshot Shooting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khozari, Nur Jannah (2017) Morphological Study Using Optical Microscope Of Natural Rubber With Modified Tapioca Starch After Soil Burial Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khumairul Azri Ramdhan , Tokiman (2015) Sustainable agriculture management for palm oil productivity enhancement : a case study at Felda Wilayah Mempaga. Project Report. UTeM. (Submitted)

Kim , Ling Sheng (2008) Multi-Level Led Dot Matrix Display Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koh, Sheng Yi (2017) Design A Low Cost Hair Dryer Using DFMA Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kusnan, Siti Zubaidah (2014) The Impacts Of Seven Waste Program Towards Manufacturing Industry Performance : A Study At Texas Instrument Electronic Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

L

Laily, Suraya and Md Ali, Mohd Amran and Nur Izan Syahriah, Hussein and Mohd Razali, Muhamad and Manshoor, Bukhari and Mohd Amri, Lajis and Raja Izamshah , Raja Abdullah and Abu Bakar, Mohd Hadzley and Taufik , Roni Sahroni (2014) TAGUCHI METHOD PREDICTION OF EDM DIE-SINKING PARAMETERS ON SURFACE INTEGRITY FOR ALUMINIUM COMPOSITE USING COPPER ELECTRODE. Sci.Int.(Lahore), 26 (4). pp. 1455-1458. ISSN ISSN 1013-5316; CODEN: SINTE 8

Lasa, Norhazirah (2017) Establishing The Design Guideline Of Customized Insole Via Pressure Distribution Foot Planar Equipment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Ban Pin (2016) Lean Production Increase Overall Equipment Efficiency In Manufacturer Paper And Paper Product Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Kok Tee and Ab Razak, Mohd Hafrez Razi and Kok, Swee Leong and Zaimi, Muhammad and Abd Rashid , Mohd Warikh and Mohamad, Noraiham and Azam, Mohd Asyadi (2015) Electrophoretic deposition and heat treatment of steel-supported pvdf-graphite composite film. Applied Mechanics and Materials, 761. pp. 412-416.

Lau, Kok Tee and Zurianee, Lokman Loganathan and Roslan, Abd. Shukor (2015) Arc Vapour Deposition Of Iron Film During Magnetron Sputtering Of Ti Film: Effect Of Substrate’s Materials And Surface Roughness. International Journal of Electrochemical Science, 10 (7). pp. 5488-5497. ISSN 1452-3981

Lau , Ong Yee (2008) Programming And Simulation Of An Arc Welding Robot. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lau , Li Ying (2014) Design analysis of sheet metal welding joint based on transient thermal condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leang, Suh Huah (2015) Production Process Simulation As A Decision Making Tool In Aggregate Planning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Pei Chen (2009) An Application Of Sampling Method For Quality Control : Case Study On Roller Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Tain Sang (2005) Automated Guided Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Wen Yuh (2011) Total Manufacturing E-Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Ho Chung (2010) Upgrade FMS200 : Shaft Supply Module Though Human Machine Interface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Pei Jing (2016) Optimizing Ceramic Shell Thickness To Enhance Its Permeability. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Pey Jiuan (2017) Analysis Of Plastic Material Moisture Absorption And Dissipation Characteristic For Crystal Rod Holder Design Optimization. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lee, Shi Guo (2016) Effect Of Cold Arc To Deflection In Continuous Welding Of Thin Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Siang Tau (2015) Implementation Of Theory Of Constraints On Buffer Management In Production Planning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Wee Pin (2015) Application Of Work Study To Reduce Operations Time At Glove Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Weng Sum (2010) Quality Optimization in The Manufacturing Industry: An Application Case. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Yeh Yee (2016) Modelling Assembly For Production Line Output : A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee , Choon Seong (2007) Problem Solving Of Foot Switches Processes Using Failure Mode And Effects Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leong, Chee Weng (2017) Reduction Of Balloon Defects In Stripping Process Using DMAIC Approach : A Case Study. Project Report. UTeM, Melaka. (Submitted)

Leow, Li Ying (2017) Manufacturing Productivity Improvement In Clothing Industry Using Toyota Sewing System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Leow, Mei Mei (2017) Redesign Work System For Productivity Improvement - A Case Study. Technical Report. UTeM, Melaka. (Submitted)

Leow, Zhi Li (2017) A Development Of Modular Automated Storage And Retrieval System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Letchkumar, Muniandy (2005) Just In Time Practice And Management. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liaw , Chin Yee (2008) Design And Development Casting Mould For Resin Based Medals. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Pay Jun and Yan , Jiwang and Masaki, Takeshi and Kuriyagawa, Tsunemoto (2012) Effect of Different Dielectric Fluids on Micro EDM of Low Conductivity Ceramic Material RB-SiC. Advanced Materials Research. pp. 529-534. ISSN 10226680

Liew, Pay Jun (2008) BMFS 3323: Proses Pembuatan Termaju (Advanced Manufacturing Process). [Teaching Resource]

Liew , Pay Jun and Shimada, Keita and Mizutani, Masayoshi and Yan , Jiwang and Kuriyagawa, Tsunemoto (2013) Fabrication of Microstructures on RB-SiC by Ultrasonic Cavitation Assisted Micro-Electrical Discharge Machining. International Journal of Automation Technology. pp. 621-629. ISSN 881-7629

Liew , Pay Jun and Yan , Jiwang and Kuriyagawa, Tsunemoto (2013) Carbon nanofiber assisted micro electro discharge machining of reaction-bonded silicon carbide. Journal of Materials Processing Technology. pp. 1076-1087. ISSN 0924-0136

Liew , Pay Jun and Yan , Jiwang and Kuriyagawa, Tsunemoto (2013) Experimental investigation on material migration phenomena in micro-EDM of reaction-bonded silicon carbide. Applied Surface Science. pp. 731-743. ISSN 0169-4332

Liew , Pay Jun and Yan , Jiwang and Kuriyagawa, Tsunemoto (2014) Fabrication of deep micro-holes in reaction-bonded SiC by ultrasonic cavitation assisted micro-EDM. International Journal of Machine Tools & Manufacture. pp. 13-20. ISSN 0890-6955

Liew , Pay Jun (2007) A study of EDM machining parameters on SKD 11 tool steel using DOE. Masters thesis, Coventry University.

Lim, Li Kiang Samuel (2007) Blender Design Improvement Through Lucas-Hull DFA Analysis. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lim, Yen San (2011) Goal Programming Approach For Production Planning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Chiew Jie (2016) Application Of Triz And ANP In Selecting The Best Concept Design At The Conceptual Design Stage For An Automotive Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Chooi Jing (2016) Tools For QRM Implementation In Job Shop Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Poh Siong (2016) A Financial Analysis To Identify Constraint Tools And Its Operational Impacts. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lim, Ru Pei (2016) Five-Axis Tool Path Programming Utilizing CATIA V5 For Turbine Blade : Aluminium 6063. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Siang Ying and Mohd Salleh , Mohamad Amran and Mohamed Yusoff, Hamdan and Abdul Rashid, Suraya and ABD RAZAK , JEEFFERIE (2011) Continuos production of carbon nanotubes - A review. Journal of Industrial and Engineering Chemistry, 17. pp. 367-376. ISSN 1226-086X

Lim, Xian Kuang Benjamin (2015) Improvement Of The Snap Lock Pin Assembly Machine At Prym Consumer Malaysia Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Ming Hao (2011) The Influence Of Welding Parameter On Butt Joint Welding Strength. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Terng Fui (2008) An Analysis Of Materials Management Of Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Wee Tat (2010) Dot Matrix LED Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Fung Chien (2010) Project Management : A Simulation Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Linus Michael, Stephen Mirando (2012) Comparison On The Microstructure And Hardness Of SMA Welding And GMA Welding Of Dual Phase Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Ting Pohg (2017) Profiling Design Preferences Using Bezier Curve Towards Kansei Engineering. Technical Report. UTeM, Melaka. (Submitted)

Loh , Sai Chun (2011) Implementing SPC Tools In A High Precision Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lok, Yian Yian (2009) BACS 2213: Statistik Dan Kebarangkalian. [Teaching Resource]

Lok, Yian Yian (2009) BACS 2222: Kaedah Berangka (Numerical Methods). [Teaching Resource]

Lokman, Abdullah and Mohd Hisham, Nordin and Muhammad Hafidz Fazli , Md Fauadi and Mohd Noor, Akmal Rosli (2008) Automated Product Inspection System Using Radio Frequency Identification (RFID) Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lokman, Abdullah (2010) BMFA 2433: Sistem Mekatronik (Mechatronics System). [Teaching Resource]

Lokman, Abdullah (2010) BMFA 3473: Penderia & Instrumentasi (Sensor & Instrumentation). [Teaching Resource]

Lokman, Abdullah (2009) DMFD 3463: Robotik & Automasi (Robotics & Automation). [Teaching Resource]

Loo, Kin Hoe (2012) Six Sigma Dmaic Implementation At Manufacturing Company. Project Report. UTeM, Melaka Malaysia. (Submitted)

Loo, Heoy Shin (2015) Bone Scaffold Design Selection By Using Analytical Hierarchy Process (AHP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loong, Win Ann (2011) Design And Analysis Of Anti Crimping Roll Position Using CAD Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low , Kuan Chuen (2008) An Analysis Incoming Quality Control Of Material In Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lum, YipHing and Shaaban, Azizah and Mitan, NonaMerryM. and Dimin, MohdFairuz and Mohamad, Noraiham and Hamid, Nadiah and Se, SianMeng (2013) Characterization of Urea Encapsulated by Biodegradable Starch-PVA-Glycerol. Journal of Polymers and the Environment, 21 (4). pp. 1083-1087. ISSN 1566-2543

M

M., Zainab and ABD RAZAK , JEEFFERIE and A.K. , Masrom and Rosli, Z. M. (2012) Effect of PEG Molecular Weight on the TiO2 Particle Structure and TiO2 Thin Films Properties. Advanced Materials Research , 364. pp. 76-80. ISSN 1662-8985

Maadis, Mohd Shahril (2016) Puyuh Farm Environment Control And Alert System Using Microcontroller And GSM Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mageswaran, Renugah (2017) Development Of Water Resistant Particleboards From Rice Husk. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mahadi , Mustafa (2009) A Feasibility Study On Design For Environment And Design For Sustainability Application In Boat Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahamood, Mazlin Aida and Mohamad, Noraiham and Abd Razak, Jeefferie and Mohd Zain, Amirul Hakimi and Shueb, Mohammed Iqbal and Ab Maulod, Hairul Effendy (2017) Correlation Of Open Cell Structure With Properties Of Green Rubber Foam From Epoxidised Natural Rubber/Reclaimed Rubber Glove. Journal of Mechanical Engineering, S1 (1). pp. 113-122. ISSN 1823- 5514

Mahani , Mohd Yusof (2006) Development Of 3 Fingers Robot Hand Gripper. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mahmood, Noor Shakir (2016) Improve The Performance Of Electricity Power Production By Adopting ISO 50001 In The Iraqi Ministry Of. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mahrob, Noramilza (2017) Welding Initiation At The Entry Stage Of Bobbin Friction Stir Welding (BFSW). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maidin, Shajahan and Abd Latiff, Anisah (2015) Nasi Lemak Packaging: A Case Study Of Food Freshness And Design Flexibility. Journal of Advanced Manufacturing Technology (JAMT) , 9 (1). pp. 13-19. ISSN 1985-3157

Maidin, Shajahan and Wan Malek, Wan Nasuha (2014) Laptop Casing Aesthetic Improvement. Journal of Advanced Manufacturing Technology, 7. NA. ISSN 1985-3157

Mamat, Umie Rosmida (2017) Quality Improvement Using Factorial Design (A Case Study In Manufacturing Company). Technical Report. UTeM, Melaka. (Submitted)

Mani, Nirmessini Maselah (2016) Application Of Kaizen To Prevent Slip Of Defective Products To Internal Customer In Automobile Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mar'emazairy , Omar (2007) The Implementation Of Total Productive Maintenance (TPM) At High Volume Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mariappan , Alaganathan (2014) Innovative die design for sheet metal stamping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mariati, Sabah (2016) Implementation of Kanban Systems through Auto Scheduling tools at Die Bond process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Masni-Azian, Akiah and Choudhury, Imtiaz Ahmed (2011) Tensile Properties of Paper Pulp Food Packaging Material. Journal of Advanced Manufacturing Technology (JAMT) , 5 (2). pp. 123-135. ISSN 1985-3157

Masni-Azian, Akiah and Choudhury, Imtiaz Ahmed and Haeryip , Sihombing and Yuhazri, Yaakob (2013) Tensile Properties Evaluation of Paper Pulp Packaging at Different Sections and Orientations on the Egg Tray. Advanced Materials Research, 626. pp. 542-546. ISSN 978-3-03785-571-3

Mastura, Roni and Juhaini, Jabar and Mariana, Yusoff and Mohd Razali, Muhamad (2013) Economic, social and environmental impact of sustainable manufacturing: a Conceptual Study. In: The 10th Asian Academy of Management International Conference 2013, 23 Aug - 25 Aug 2013, Batu Feringgi, Penang, Malaysia.

Mat Adam, Nur Syuhada (2017) Setup Time Reduction Of Snap Fastener Machine By Implementing Single Minute Exchange Of Die. Technical Report. UTeM, Melaka. (Submitted)

Mat Yamin, Ahmad Kamal (2018) Exercise 5: Creating a 3-D Solid Model in AutoCAD 2017. [Video] (Unpublished)

Mawaddah, Mohd Nawi (2015) Design Of Safety System For Comau Articulated Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Ikhwan Fakhrulhaziq (2017) Effect Of Different Welding Parameters To The Mechanical Properties Of Spot Weld. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Mazliah and Mohamad, Noraiham and Ab Maulod, Hairul Effendy and Abd Razak, Jeefferie and Othman, Intan Sharhida and Hashim, Hanizam and Mohd Abid, Mohd Asyadi 'Azam and Ahsan, Qumrul and Mohd Safeai, Nur Maizatul Nadia and Mohd Mef’at, H. (2017) Weight Loss By Soil Burial Degradation Of Green Natural Rubber Vulcanizates Modified By Tapioca Starch. Proceedings Of Mechanical Engineering Research Day 2017. pp. 405-407. ISSN -

Md Ali, Mohd Amran and Hilmi, Hazwani and Mohd Sani, Siti Salmah and Abdullah, Zulkeflee and Mohamad, Effendi and Liew , Pay Jun (2014) Evaluation of Mechanical Performance of Homopolymer Polypropylene/Kenaf Fibre/ Binder using Full Factorial Method. Advanced Research in Materials Science, 1 (1). pp. 7-13. ISSN 2289-7992

Md Ali, Mohd Amran and Laily, Suraya and Fatin, Aisyah and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Bukhari and Mohd Amri, Lajis and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Taufik, Roni Sahroni (2014) The Performance of Brass Electrode on Material Removal for Aluminium Composite in EDM Die-Sinking. Applied Mechanics and Materials, 660. pp. 43-47. ISSN 1662-7482

Md Ali, Mohd Amran and Laily, Suraya and Nor, Halida Ilyani Kamarudin and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Bukhari and Lajis, Mohd Amri and Raja Izamshah , Raja Abdullah and Abu Bakar, Mohd Hadzley and Taufik, Roni Sahroni (2014) The Effect of EDM Die-Sinking Parameters on Material Characteristic for Aluminium Composite Using Tungsten Copper Electrode. Applied Mechanics and Materials, 465-466. pp. 1214-1218. ISSN 1662-7482

Md Ali, Mohd Amran and Salmah, Siti and Abdul Aziz, Mohd Sanusi and Mohd Yuhazri, Yaakob and Noraiham, Mohamad and Mohd Abid, Mohd Asyadi Azam and Zulkeflee, Abdullah and mohamad , effendi (2014) Surface Roughness Optimization in Drilling Process Using Response Surface Method (RSM). Jurnal Teknologi (Sciences and Engineering), 66 (3). pp. 29-35. ISSN 21803722

Md Ali, Mohd Amran and Salmah, Siti and Zaki, Mohd and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Sivarao, Subramaniam and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) The Effect of Pressure on Warpage of Dumbbell Plastic Part in Injection Moulding Machine. Advanced Materials Research, 903. pp. 61-66. ISSN 1662-8985

Md Ali, Mohd Amran and Suraya, Laily and Assyura, Nor and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Bukhari and Lajis, Mohd Amri (2014) The Effect of EDM Die-Sinking Parameters on Non-Conductive Materials. Advanced Materials Research, 903. pp. 56-60. ISSN 1662-8985

Md Ali, Mohd Amran and K.M, Faizal and Salleh, Mohd Shukor and Sulaiman, Mohd Amri and Mohamad, Effendi (2015) Design Consideration For Design A Flat And Ring Plastics Part Using Solidworks Software. IOP Conference Series: Materials Science And Engineering, 100 (1). pp. 1-9. ISSN 1757-8981

Md Ali, Mohd Amran and Laily, Suraya and Kamarudin, NOR Halida Ilyani and Hussein, Nur Izan Syahriah and Mohd Razali, Muhamad and Bukhari, Mashoor and Lajis, Mohd Amri and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Taufik, Roni Sahroni (2014) The Effect of EDM Die-sinking Parameters on Material Characteristic for Aluminium Composite Using Tungsten Copper Electrode. Applied Mechanics and Materials. pp. 1214-1218. ISSN 1662-7482

Md Ali, Mohd Amran and Laily, Suraya and Nor Assyura, Nor and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Mohd Bukhari and Lajis, Mohd Amri (2014) The Effect of EDM Die-sinking Parameters on Non-conductive Materials. Applied Mechanics and Materials. pp. 56-60. ISSN 1662-7482

Md Ali, Mohd Amran and M., Faizal and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Subramonian, Sivarao (2015) Product And Tooling Design Of Slanted Glass Injection Mould For Visualization Of Flow Molten Plastic. Jurnal Teknologi, 77 (21). pp. 9-18. ISSN 0127-9696

Md Ali, Mohd Amran and Salmah, Siti and Zolkarnain, Marjom and Umar , Al-amani and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Zulkeflee, Abdullah and Abdul Aziz, Mohd Sanusi (2014) WARPAGE ANALYSIS VERIFICATION BETWEEN SIMULATION AND EXPERIMENTAL OF DUMBBELL PLASTIC PART IN THE INJECTION MOULDING PROCESS. Sci.Int.(Lahore), 26 (4). pp. 1575-1579. ISSN ISSN 1013-5316

Md Dan, Md Palil (2006) BMFG 1812: Pengenalan Kepada Kejuruteraan Pembuatan. [Teaching Resource]

Md Nizam, Abd Rahman (2009) BMFS 4353: Proses Pembuatan Termaju (Advanved Manufacturing Process). [Teaching Resource]

Md Nizam, Rahman (2009) BMFG 1812: Pengenalan Kepada Kejuruteraan Pembuatan (Introduction To Manufacturing Engineering). [Teaching Resource]

Md Palil, Md Dan and Aaron Yu, L (2012) DESIGN AND ANALYSIS A NEW MATERIALS OF GASKET PIPPING USING WASTE RUBBER TYRES AND COCONUT COIR FIBRE. Advanced Manufacturing Technology, 6 (2). pp. 11-27. ISSN 1985-3157

Md Palil, Md Dan (2007) BMFR 3133: Reka Bentuk Produk (Product Design). [Teaching Resource]

Md Razali, Ayob (2004) BMFG 2813: Termo Bendalir. [Teaching Resource]

Md Razali, Ayob (2003) BMFG 2813: Termo-Bendalir. [Teaching Resource]

Md Razali , Ayob (2003) BMFG 2813: Termo-Bendalir. [Teaching Resource]

Md. Akil, Hazizan and Ng, Lily and ABD RAZAK , JEEFFERIE and Ong, Huilin and Ahmad, Zainal Arifin (2006) Effect of Various Coupling Agents on Properties of Alumina-filled PP Composites. Journal of reinforced Plastics and Composites, 25 (7). pp. 745-759. ISSN 0731-6844

Md. Dan, Md. Palil (2009) BMFS 4373: Rekabentuk Produk Dan Pembuatan (Product Design Ad Manufacture). [Teaching Resource]

Md. Dan, Md. Palil (2009) BMFR 2123: Rekabentuk Dalam Ergonomik (Ergonomik In Design). [Teaching Resource]

Md. Dan, Md. Palil (2008) BMFR 3123: Ergonomik Dalam Rekabentuk (Ergonomics In Design). [Teaching Resource]

Md. Dan, Md. Palil (2006) BMFR 3133: Rekabentuk Produk. [Teaching Resource]

Md. Liza, Rossyana (2016) Minimize Waste At Production Line By Implementation Lean Manufacturing Tools (Poka Yoke). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Meor Mohd Azwan , Sahran (2010) Application Of Value Stream Mapping (VSM) In Manufacturing Industry (Case Study : Jati Beringin Sdn. Bhd.). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Michel Raj, Maria Amirtha Raj (2017) Improving Overall Equipment Effectiveness Of Tesec Test Handler On Unloader Jamming Reduction At LPL Testing Area Using DMAIC Approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mikail Lim, Mohd Hishamuddin (2017) The Influence Of Process Parameters Of Electrophoretic Deposition (EPD) Of Carbon Nanotubes (CNTs) On Brass Wire For Electrical Discharge Machining (EDM). Masters thesis, Universiti Teknikal Malaysia Melaka.

Minhat, Mohamad (2013) CNC Machine System Via STEP-NC Data Model and Lab VIEW Platform for Milling Operation. In: 2013 IEEE Conference on Open Systems (ICOS), December 2-4, 2013, Sarawak, Malaysia.

Minhat, Mohamad (2012) Design and Machining Control via Interoperable Function and STEP-NC Data Model. In: International Conference on Flexible Automation and Intelligent Manufacturing, June 10-13, 2012, Helsinki, Finland.

Minhat, Mohamad and Abd Rahman, Md Nizam and Abbas, Adnan Jameel (2014) Cutting Parameters Optimization of Mild Steel via AIS Heuristics Algorithm. In: iDECON 2014 – International Conference on Design and Concurrent Engineering, 21 - 23 September 2014, Melaka.

Minhat, Mohamad and Abd Rahman, Md Nizam and Abbas, Adnan Jameel (2014) Prediction of Optimum Cutting Conditions in Dry Turning Operations of S45C Mild Steel using AIS and PSO Intelligent Algorithm. In: international symposium on Research in Innovation and Sustainability 2014 (ISoRIS2014), 15-16 October 2014, Malacca.

Minhat, Mohamad and Xu, Xun (2008) Characteristics and Technologies of Advanced CNC Systems. In: Encyclopedia of Information Science and Technology. IGI Global, Hershey, PA 17033-1240, USA, pp. 519-526.

Minhat, Mohamad (2013) ADVANCED MANUFACTURING: TECHNOLOGY REVIEW ON THE FABRICATION OF AN AIRCRAFT COMPONENT (FISH-HEAD). In: National Conference on Engineering Technology 2013, 1 - 2 July 2013, Shah Alam Convention Centre (SACC, 1 - 2 July 2013, Shah Alam Convention Centre (SACC). (In Press)

Minhat, Mohamad (2011) An Assessment on Graphite Milling Characteristics. In: International Conference and Exhibition on Sustainable Energy andAdvanced Materials (ICE SEAM 2011), October 3-4, 2011, Solo-Indonesia.

Minhat, Mohamad (2012) Design and Machining Control via Interoperable Function Blocks and STEP-NC Data Model. In: 3rd International Conference on Design and Product Development (ICDPD 2012), December 29-31, 2012, Montreux, Switzerland.

Minhat, Mohamad (2011) A Framework for a Development of an Intelligent CNC Controller Based on STEP-NC. Advanced Materials Research , 383 - . pp. 984-989. ISSN 10.4028/www.scientific.net/AMR.383-390.984

Minhat, Mohamad (2012) Interoperable CNC Machine via Function Block and STEP-NC Data Model for Milling Operation. Applied Mechanics and Materials, 229-23. pp. 2365-2369. ISSN 1660-9336

Minhat, Mohamad (2012) Interoperable_CNC_Machine_via_Function_Block_and_STEP-NC_Data_Model_for_Milling_Operation. In: 4th International Conference on Mechanical and Electrical Technology , 26-26 JULY 2012, KL.

Minhat, Mohamad (2014) An Open STEP-NC Controller Via LabVIEW platform. Periodical of Applied Mechanics and Materials Vol 660 in 2014, 660 (873). pp. 1-5. ISSN 10.4028/www.scientific.net/AMM.660.873

Minhat, Mohamad (2014) i_FB NC Controller - Intelligent Function Block NC Controller. [Show/Exhibition]

Minhat, Mohamad and Abd. Rahman, Md Nizam (2013) A mild steel shear zone temperature minimization using genetic algorithm and direct search toolbox in cnc turning operation. International Review of Mechanical Engineering, 7 (1). pp. 38-45. ISSN 1970-8734 (In Press)

Minhat, Mohamad and Kasim, Mohd Shahir (2014) MACHINING PARAMETERS OPTIMIZATION FOR TRIMMING OPERATION IN A MILLING MACHINE USING TWO LEVEL FACTORIAL DESIGN. In: 5th International Conference on Mechanical, Industrial and Manufacturing Technologies MIMT2014, 10-11 March 2014, Penang Malaysia. (Submitted)

Minhat, Mohamad and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) RETROFITTING A CONVENTIONAL LATHE TO A DIGITAL INTELLIGENCE SYSTEM. In: International Conference on Artificial Intelligence and Computer Science (AICS 2014), 15 - 16 September 2014, Bandung, Indonesia.

Minhat, Mohamad and Vyatkin, Valeriy and Xu, Xun (2009) STEPNCMillUoA: A CNC system based on STEP-NC and Function Block architecture. . International Journal of Mechatronics and Manufacturing Systems, 2 (1/2). pp. 3-19.

Minhat, Mohamad and Vyatkin, Valeriy and Xu, Xun and Wong, Soon and Al-Bayaa, Zina (2009) A novel open CNC architecture based on STEP-NC data model and IEC 61499 function blocks. Robotics and Computer Integrated Manufacturing, 25. pp. 560-569.

Minhat, Mohamad and Xu, Xun (2008) Development of an Open Soft CNC System Based on STEP-NC and Function Blocks. In: 5th International CIRP-sponsored Conference on Digital Enterprise Technology (DET), 22-24 October 2008, Nantes, France.

Minhat, Mohamad and Xu, Xun (2010) ‘STEPNCFBUoA’ - An Advanced Manufacturing Control System based on STEP-NC and FB enabled technology. In: The 2nd International Conference on Engineering and ICT (ICEI 2010), 18-20 February 2010, Holiday Inn, Melaka.

Minhat, Mohamad and Xu, Xun (2009) A feature-based Machining Using Function Block Technology. In: IEEE International Conference on Control and Automation, December 9-11, 2009, Christchurch, New Zealand .

Mohamad, Effendi and Teruaki, Ito and Yuniawan, Dani (2013) Lean Manufacturing Tools Training System. In: JSME No.13-205 The 13th Design Engineering Workshop 2013, 28-30 Nov 2013, Kitakyushu, Japan.

Mohamad, Noraiham and Yaakub , Juliana and ABD RAZAK , JEEFFERIE and YAAKOB, MOHD YUHAZRI and Shueb, Mohammed Iqbal and Muchtar, Andanastuti (2014) Effects of Epoxidized Natural Rubber (ENR-50) and Processing Parameters on the Properties of NR/EPDM Blends Using Response Surface Methodology. Journal of Applied Polymer Science, 131 (17). 40173 (1)-40713 (8). ISSN 1097-4628

Mohamad, Effendi and Abdullah, Rohana and Wan Mahmood, Wan Hasrulnizzam (2004) The Level Of Achievement Of Lean Manufacturing Implementation Status Before And After The Development Of KPI's At An Aerospace Manufacturing Company. In: The Seminar Kebangsaan Komunikasi Ke-2, 18-19 Dicember 2004, Pulau Langkawi, Malaysia .

Mohamad, Effendi and Ito, Teruaki and Yuniawan, Dani and Ibrahim, Mohamad Amran and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad and Md Ali, Mohd Amran (2014) A Proposal Of Muda Indicator Agent To Estimate Lean Manufacturing Verification. Journal of Advanced Manufacturing Technology (JAMT) , 8 (2). pp. 71-82. ISSN 1985-3157

Mohamad, Effendi and Sulaiman, Mohd Amri (2016) Simulation-based approach to Lean Manufacturing. Technical Report. Penerbit Universiti,UTeM.

Mohamad, Effendi and T., Ito and D., Yuniawan and Ibrahim, Mohamad Amran and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad and Md Ali, Mohd Amran (2014) A Proposal Of Muda Indicator Agent To Estimate Lean Manufacturing Verification. Journal Of Advanced Manufacturing Technology, 8 (2). pp. 71-82. ISSN 1985-3157

Mohamad, Effendi and Teruaki, Ito and Dani , Yuniawan and Ibrahim, M. A. and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad (2014) A Proposal Of Muda Indicator Agent To Estimate Lean Manufacturing Verification. Journal of Advanced Manufacturing Technology (JAMT) , 8 (2). pp. 71-82. ISSN 1985-3157

Mohamad, Minhat (2005) BMFS 4353: Proses Pembuatan Termaju. [Teaching Resource]

Mohamad, Mohamad Roszulfadli (2016) Analysis Of Performance For Cart Gantry Crane System Using Scheduling Algorithm Via Controller Area Network (CAN). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Mohamad Roszulfadli (2016) Analysis Of Performance For Cart Gantry Crane System Using Scheduling Algorithm Via Controller Area Network (CAN). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Noraiham and Abdul Hamid, Nor Nadiah and Abdul Aziz, Nor Abidah and ABD RAZAK , JEEFFERIE and Azlan, Umar Al-Amani and Dimin, Mohd Fairuz and Shaaban, Azizah (2015) Potential of epoxidized natural rubber (ENR)as hydrophobicity contributor in chitosan-urea fertilizer. Applied Mechanics and Materials, 761. pp. 536-541. ISSN 1660-9336 (In Press)

Mohamad, Noraiham and Mahamood, Mazlin Aida and Abd Razak, Jeefferie and Munawar, Rose Farahiyan and Zainal Abidin , Muhammad Zaimi and Mohd Abid, Mohd Asyadi Azam and Kasim, Mohd Shahir and Othman, Mohd Shahrizan and Shueb, Mohamad Iqbal (2015) Cure characteristics of natural rubber/EPDM blends for the effect of MAH grafted EPDM and compounding parameters via response surface methodology. Applied Mechanics and Materials, 761. pp. 441-446. ISSN 1660-9336 (In Press)

Mohamad , Minhat (2011) MMFS5013: Pembuatan Pintar. [Teaching Resource]

Mohamad , Minhat (2011) MMFS5013: Pembuatan Pintar. [Teaching Resource]

Mohamad , Minhat and Abdul Rahim , Samsudin and Nor Akramin , Mohamad (2004) BMFS 3363: Teknologi Mesin Peralatan (Machine Tools Technology). [Teaching Resource]

Mohamad Anuar, Zainuddin (2007) Analysis of Surface Integrity of Aero Composite Material in Drilling With High Speed Cutting Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fadzli, Mat Jusoh (2006) Simulation Study On The Performance Of Flow Shop Scheduling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faidzal, Razali (2010) Productivity Improvement The Implementation Of 7QC Tools At Communication Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fikri, Mohamad Jaya (2015) Production Line System Enhance Based On Modeling And Simulation Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Firdhaus , Mohamad Lajis (2008) Performance Analysis Of Six Axis Industrial Robot. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Haidir, Maslan (2008) DMFD 2833: Mekanik Bendalir (Fluid Mechanics). [Teaching Resource]

Mohamad Haidir, Maslan (2009) BMFB 2213: Bahan Kejuruteraan (Engineering Materials). [Teaching Resource]

Mohamad Haidir, Maslan (2009) DMFD 2833: Mekanik Bendalir (Fluid Mechanics). [Teaching Resource]

Mohamad Haidir, Maslan (2010) DMFD 2833: Mekanik Bendalir (Fluid Mechanics). [Teaching Resource]

Mohamad Haidir, Maslan (2010) DMFD 2853: Mekanik Bahan (Mechanic Of Materials). [Teaching Resource]

Mohamad Hamdan, Yadzi (2007) Merekabentuk Sebuah Kerusi Tulis Yang Sesuai Digunakan Untuk Pengguna Bertangan Kiri Dan Kanan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ishak, Nurul Naili and Salleh, Mohd Shukor and Yahaya, Saifudin Hafiz and Mohamad, Effendi and Sulaiman, Mohd Amri (2017) The Effect of Equal Channel Angular Pressing (ECAP) on the Microstructure and Hardness of A356 Aluminium Alloy. Journal Of Advanced Manufacturing Technology (JAMT), 11 (2). pp. 47-57. ISSN 1985-3157

Mohamad Kadim , Suaidi (2011) Compact Multiband Antenna Design For RFID Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Kamal, Mohamad Ridzuan and Abdul Rahman, Abdul Raheem and Wakhi Anuar, Nur Farah Bazilah and Salleh, Mohd Shukor (2017) Effect Of Coating Thickness On The Microstructure And Mechanical Properties Of AL-SI (LM6) Alloy Lost Wax Casting. Journal Of Mechanical Engineering, SI (3) (1). pp. 97-106. ISSN 1823- 5514

Mohamad Mukhlis, Abu Bakar (2010) Application Of Facility Layout Software : Case Study At Isuzu Hicom Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Muzammir, Rosli (2016) Optimizing the changeover of packaging machine by implementing single minute exchange of dies in textile manufacturing industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Muzammir, Rosli (2015) Proposing A Single Minute Exchange Of Dies In Textile Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Naubfal , Ahamad (2014) A study on material management at an aerospace production. Project Report. UTeM, UTeM. (Submitted)

Mohamad Nazeeb , Bolhassan (2006) Pulley System Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Nizam, Ayof (2007) DACS 1263: Fizik Asas. [Teaching Resource]

Mohamad Nizam, Ayof (2008) DACS 1263: Fizik Asas (Basic Physics). [Teaching Resource]

Mohamad Nizam, Ayof (2009) DACS 1263: Fizik Asas (Basic Physics). [Teaching Resource]

Mohamad Nizam, Ayof and Nur Izan Syahriah, Hussein and Zakaria , Mohd Noh (2015) Mechanical properties comparison of stainless steel 304L and carbon steel BS1387 prior to orbital welding. Applied Mechanics and Materials, 761. pp. 79-82. ISSN 1660-9336

Mohamad Pzil, Nor Faezah (2017) Design And Analysis Of Thixoforming Alternator Housing Using Advance Casting Simulation Software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Raziff, Ramli (2015) An Improved Fair Nurse Scheduling Optimisation Using Particle Swarm Intelligent Technique. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Ridzuan, Jamli (2007) The Effect Of Mig Welding Parameters On Aluminium Alloy Al6063-T6. Masters thesis, Coventry University.

Mohamad Ridzuan, Jamli (2008) BMFS 2513: Manufacturing Process I (Proses Pembuatan I). [Teaching Resource]

Mohamad Ridzuan, Jamli (2009) BMFS 3373: Teknologi CNC (CNC Technology). [Teaching Resource]

Mohamad Ridzuan, Jamli (2010) BMFS 3373: Teknologi CNC (CNC Technology). [Teaching Resource]

Mohamad Sharis , Abdul Karim (2005) BMFR 3133: Rekabentuk Produk. [Teaching Resource]

Mohamad Tajuddin, Ramli (2015) Developing A Lego-Bot 3D Printer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zahuri, Jamil (2015) Design And Analysis Of Base Assembly For Flange Resurface Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zawawi, Abdul Razak (2015) Design Of Automated Guided Vehicle (AGV) For Workpieces Transportation In Manufacturing Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zulhilmi, Abdullah (2011) Computer Integrated Manufacturing (CIM) - Development Of Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed, Hazim (2016) Preliminary Investigation Of Visual Features For AGV Localization Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed, Khaled (2010) MMFD5053: Perancangan Kemudahan (Facilities Planning). [Teaching Resource]

Mohamed, Khaled (2010) MMFU5053: Engineering Optimization. [Teaching Resource]

Mohamed, Saiful Bahri and Abbas, Adnan Jameel and Minhat, Mohamad (2013) A Review on Intelligence STEP-NC Data Model and Function Blocks CNC Machining Protocol. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC 2013), December 4-6, 2013, Johor Bahru, Malaysia.

Mohamed, Saiful Bahri and Abbas, Adnan Jameel and Minhat, Mohamad (2014) A Review on Intelligence STEP-NC Data Model and Function Blocks CNC Machining Protocol. Advanced Materials Research. pp. 779-845. ISSN 10.4028/www.scientific.net/AMR.845.779

Mohamed Hairi, Mohamed Azelan (2016) Mircostructural Morphology And Mechanical Properties Of Rheocast A319 Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Khaled, Omar (2009) BMFP 3523: Pengurusan Kualiti (Total Quality Management). [Teaching Resource]

Mohamed Khaled, Omar (2009) BMFP 3562: Penyelidikan Operasi (Operational Research). [Teaching Resource]

Mohamed Khaled, Omar (2010) BMFP 3562: Penyelidikan Operasi (Operational Research). [Teaching Resource]

Mohamed Khaled, Omar (2010) BMFP 4613: Perancangan & Rekabentuk Kemudahan (Facilities Planning & Design). [Teaching Resource]

Mohamed Sultan, Al Amin (2018) Managing Supply Chain Complexity: Foresight For Wind Turbine Composite Waste. Procedia CIRP, 69. pp. 938-943. ISSN 2212-8271

Mohammad, Muhammad Nur Azizi (2016) Development Of A Framework For Remanufacturing Of LCD Monitor At The Disposal Stage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Aizrulshah, Kamaruddin (2013) Design And Optimization Of Runner And Gating Systems For The Permanent Mold Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Asa'ari , Rahmat (2009) Study Of The Epoxy Resin Bonding Process Of Aluminium Alloy : Chemical Pickling Process (Sulphuric Acid). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad Faiz, Samsuddin (2008) Proses Penghasilan Acuan Dari Rekabentuk Produk Sehingga Terhasilnya Produk Dengan Penggunaan CAD/CAM (E-Manufactuing). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hadi , Abd Halim (2009) Maintenance Strategy Development (MSD) Using Reliability Centered Maintenance In A Power Plant : A Holistic Study. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad Kamil, Sued (2009) BMFP 3542: Kejuruteraan Metrologi (Engineering Metrology). [Teaching Resource]

Mohammad Kamil, Sued (2010) DMFD 2542: Metrologi (Metrology). [Teaching Resource]

Mohammad Kamil, Sued (2008) BMFP 3542 / BMFP 3543: Metrologi Kejuruteraan (Engineering Metrology). [Teaching Resource]

Mohammad Kamil, Sued (2010) BMFP 3542: Kejuruteraan Metrologi (Engineering Metrology). [Teaching Resource]

Mohammad Kamil, Sued (2015) Fixed Bobbin FSW of Marine Grade Aluminium. PhD thesis, University of Canterbury.

Mohammad Khabib , Khalib (2008) Study On Boronizing And The Kinetics In Low Alloy Tool Steel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad Rashidi, Razali (2011) The Study Of Lean Principles To Support The Environmental Management System (EMS). Masters thesis, UTeM.

Mohammad Rozainee , Othman (2007) FMS 200 Output Count Display. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohammad Shokri, Mohammad Amirul Syafeeq (2014) Implementation Of Smart Inventory Management System For Efficiency Enhancement : A Case Study Of SmartBin In Cohu, Inc Semiconductor Equipment Group, Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Syafiq , Mohd Sarif (2015) The application of time compression technologies of an artifact in Malay carving (mould of 'Papan Pemanis'). Project Report. UTeM. (Submitted)

Mohammad kamil, Sued (2009) DMFD 2542: Kejuruteraan Metrologi (Engineering Metrology). [Teaching Resource]

Mohammeed Azizi , Rudy Abdullah (2009) Design Improvement On A Product Using DFMA: Industrial Machinery. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Afzanizam, Mohd Rosli and Akop, Mohd Zaid and Mansor, Muhd Ridzuan and Sivarao, Subramonian (2011) Development of a Stand-alone Solar Powered Bus Stop. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 3 (2). pp. 55-66. ISSN 2180-1053

Mohd Aizuddin, Abd Razak (2009) Design And Product Development Of Product (s) Through Concurrent Engineering Tools And Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ali, Noor Khairul Nisa (2017) Improving Mechanical Properties Of Fused Deposition Modeling Printed Part With Optimized Parameter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Amer, Muhammad Syahrul Nezar (2017) DOE Approach In Determination Of The Optimum Welding Parameters For Three Layer Spot Weld. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amran, Md Ali (2006) BMFG 2823: Mekanik Gunaan. [Teaching Resource]

Mohd Amran, Md Ali (2006) BMFS 3343: Alat Pengeluaran. [Teaching Resource]

Mohd Amran, Md Ali and Mohd Faizal, Khalik (2014) Effect of injection moulding process parameters on plastic part quality in transparent glass mould. In: International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), 15 and 16 October 2014, PPS UTeM .

Mohd Amran, Md Ali and Raja, Izamshah and Nur Izan Syahriah, Hussein and Mohd Shahir, Kasim and Mohd Amri , Sulaiman and Mohd Rizal, Salleh and Effendi , Mohamad and Sivarao, Subramonian and Pay Jun, Liew and Zulkeflee, Abdullah (2014) Performance of Wire-EDM Parameters on Machining Characteristics of Titanium Alloy (Ti6Al4V) using Taguchi Method. In: Malaysia University Conference Engineering Technology 2015, 10-11 November 2014, Melaka.

Mohd Amri, Sulaiman (2006) BMFS 2513: Proses Pembuatan I. [Teaching Resource]

Mohd Amri, Sulaiman (2009) DMFD 2853: Mekanik Bahan (Mechanics Of Material). [Teaching Resource]

Mohd Amri , Sulaiman (2006) BMFS 2513: Proses Pembuatan I. [Teaching Resource]

Mohd Arshad, Nor Amirah (2016) Order Pattern Prediction Using Artificial Intelligence In An Inventory System Design. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Asyadi 'Azam, Mohd Abid (2007) BMFB 2213: Bahan kejuruteraan (Engineering Materials). [Teaching Resource]

Mohd Asyadi', Mohd Abid (2007) BMFB 4213: Kejuruteraan Kakisan (Corrosion Engineering). [Teaching Resource]

Mohd Azinuddin, Ismail (2009) Kajian Model Bentuk Piawai Menggunakan Prototaip Pantas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizi, Kasmuri (2011) An Investigation Of The Hot Dip Galvanized Product (Stay Plate) At Jati Beringin Sdn. Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azmel, Aziz (2008) Joining Performance Of Aluminum T6063 Using GMAW Welding. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Azroy, Mohd Razikin (2015) Development Of An Integrated Failure Mode Effect And Criticality Analysis (FMECA) And Analytical Hierachy Process (AHP) For Automotive Stamping Part. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Badli , Ramli (2009) Redesign Of Nail Clipper Through BD Design For Assembly Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Basir, Mohamad Faris (2017) Determination Of Dimensional Accuracy Of A Part By Silicone Rubber Mold Using Taguchi Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Basir, Nur Hazirah (2017) Study On Design For Manufacturing Of Benchmarking Design Using Fused Deposition Modeling An Entry Level 3D Printer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Dzuhairy , Hussain (2006) Kajian Sifat Sambungan Bahan Logam Melalui Proses Kimpalan. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Edeerozey, Ab Manaf (2008) BMFB 3263: Pencirian Bahan (Materials Characterization). [Teaching Resource]

Mohd Edeerozey, Abd Manaf (2007) BMFB 3242: Bahan Plastik @ Logam (Plastic Materials & Metals). [Teaching Resource]

Mohd Edeerozey, Abd Manaf (2006) BMFB 3242: Bahan Plastik Dan Logam. [Teaching Resource]

Mohd Ezhar , Amir Razlan Shapawi (2014) Evaluating the service quality in Faculty of Engineering UTeM. Masters thesis, UTeM.

Mohd Fadzil, Syahirah (2017) Design Of Modular Smart Pick & Place Automation System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzli, Talib (2013) Design And Analysis Of Production Tooling Using Computational Fluid Dynamic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Ahmad (2010) Eliminating Waste : Enhancement Of Productivity Of Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fairuz, Dimin (2010) DACS 1263: Fizik Asas (Basic Physics). [Teaching Resource]

Mohd Fairuz, Dimin (2007) BMFB 3223: Metalurgi Mekanikal (Mechanical Mettalurgy. [Teaching Resource]

Mohd Fairuz, Dimin (2009) DACS 1212: Matematik Asas (Elementary Mathematic). [Teaching Resource]

Mohd Fairuz , Suliman (2006) Product Development Using QFD Methodology-A Case Study Of Car Wipe. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Fairuz Nizam , Ibrahim (2007) The Development Of Modular Product Design : Foldable Chair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizal , Mohd Pauzi (2013) Tailored Orbital Welding Of Dissimilar Stainless Steels Material. Project Report. UTeM, Melaka. (Submitted)

Mohd Farid , Che Zainal Abidin and Mohamad, Minhat and Zulkifli, Abdullah (2004) BMFS 2513: Proses Pembuatan I (Manufacturing Process I). [Teaching Resource]

Mohd Fariz, Sabtu (2009) Application Of Design For Environment In Product Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Ibrahim (2010) Design Rules For Casting Process Using CAD Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Ramli (2010) Rapid Prototyping On Biomanufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Samsudin (2016) Experimental study of sheer strength of sheet metals. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Firdaus , Ibrahim (2010) Design Rules For Casting Process Using CAD Tool. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Firdaus , Ramli (2010) Rapid Prototyping On Biomanufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fozi, Airini An Nadrah (2017) Automated Guided Vehicle (AGV) System Based On Simultaneous Localization And Mapping (SLAM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fua'ad , Rahmat and Syed Salim , Syed Najib and Ahmad 'Athif , Mohd Faudzi and Zool Hilmi, Ismail and Noorhazirah, Sunar and Kamaruzaman, Jusoff (2011) controller. The result shows that the proposed controller reduced the overshoot and steady state error of the pneumatic actuator system to no overshoot and 0.025mm respectively. Index terms: System identification, recursive least square, ARX, dead zone compensator, pneumatic actuator. Non-linear Modeling and Cascade Control of an Industrial Pneumatic Actuator System, 5 (8). pp. 465-477. ISSN 1991-8178

Mohd Fua'ad , Rahmat and Syed Salim , Syed Najib and Ahmad ‘Athif, Mohd Faudzi and Zool Hilmi, Ismail (2012) Identification And Non-Linear Control Strategy For Industrial Pneumatic Actuator. International Journal of the Physical Sciences, 7 (17). pp. 2565-2579. ISSN 1992-1950

Mohd Fuad, Umar (2014) Effect of assembly line parameters to plug assembly cycle time /. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hadar, Jaafar (2009) Development Of Distributed Control System Using Servo Driven Position Control Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Haffizzi , Md Idris (2007) Design A Casing For Air Pressure Plug Rapid Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafidz Fazli, Fuandi (2006) BMFA 4463: Pembuatan Intergrasi Komputer. [Teaching Resource]

Mohd Hafiz, Mohamed Hassan (2011) An Improvement To Reduce Misdetection Of Arc And Spatter In Welding Process By Image Processing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz, Zani and Halim, Isa and Muhammad Syafiq, Syed Mohamed (2014) The effects of roller conveyor on muscle activity in workpiece loading on CNC machining centre: a preliminary study. Applied Mechanics and Materials, 761. pp. 673-677. ISSN 1662-7482

Mohd Hafiz , Mohammad Noor (2009) Quality Improvement By Using Taguchi Method In Disk Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Abd. Rahman (2008) Utilization Of Oil Palm Shell Powder (OPSP) As Filler In Acrylonitrile-Butadiene-Stryrene (ABS) Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Mohd Ismail (2010) Improvement Of Medical Product Through Design For Environment (DfE) Methodology : A Case Study Dialyzer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizudin, Hashim (2015) Design And Analysis Of Blanking And Bending Die For Thimble Open Small By Using ANSYS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizzol, Karim (2012) Designing And Fabrication Modular Products With The Incorporation Of DIY Assembly Method (Study Table). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hamka, Nurhazimah (2017) A Study On The Awareness Of Malaysia's Manufacturing Industries In Implementing Industry 4.0. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Hanafi , Mohd Sadri (2008) Manufacturing Modeling And Simulation In A Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hariz Nasfu , Mohd Azmi (2009) Study Of Epoxy Resin Bonding Process Of Aluminium Alloy : Chemical Pickling Process (Hydrochloric Acid). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Hasni, Muhamad Ezmer Syazni (2017) Preferences Of Profile Design Product Using Kansei-Pairwise Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Hazuan , Mohd Zawawi (2009) Design And Analysis Of Electrical Iron Using Boothroyd Dewhurst DFMA Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hisham, Nordin (2008) BMFA 2413: Sistem Kawalan (Control System). [Teaching Resource]

Mohd Hisham, Nordin (2010) BMFA 4423: Sistem Kecerdikan Buatan (Artificial Intelligent System). [Teaching Resource]

Mohd Hisham, Nordin (2009) BMFA 4423: Sistem Kecerdikan Buatan (Artificial Intelligent Systems). [Teaching Resource]

Mohd Hisham , Nordin (2007) Development Of Automatic Orientation Device For Multiple Objects. Masters thesis, Coventry University .

Mohd Idain Fahmy, Rosley (2007) Kajian Terhadap Rekabentuk Raifal Tempur Baru Untuk Angkatan Tentera Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Idrus, Muhammad Nurfikri (2017) Analysis On Anti-Hunchback Device By Using Electromyography (EMG). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ikhwan Hafiz , Md Noor (2009) Six Sigma (DMAIC) Implementation In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ikhwanul Hayat, Seman (2015) Effect Of Resin Ratio And Baking Temperature To The Properties Of Biodegradable Resin Bonded Sand Casting Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Irfan , Mohd (2006) Controlling AGV Via PC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ishammudin, Mohd Yunus (2008) Design And Development Of Grass Cutting Machine Using DFMA Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Izhar, Bahru (2006) Management And Improvement Of CAD/CAM System - Steelcase Artwright Manufacturing Sdn. Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Izuwan, Ismail (2015) Mereka Bentuk Sistem Pengumpulan Madu Kelulut Untuk Kegunaan SME. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Izwan , Zaini (2007) Design For Manufacturing And Asembly (DFMA) Of Industry Product. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Jefri , Amir (2007) Assessment Of Fuse Deposition Modeling (FDM) Machine And 3D Modeling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Johari, Ahmad Syahir 'Izzat (2016) Reka Bentuk Dan Pembangunan Alat Pengasah Pisau. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Juzaili, Lokman (2010) Mechanism Development Of Gripper For 5kg Payload. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Juzaili , Lokman (2010) Mechanism Development Of Gripper For 5kg Payload. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Khairul Adli , Mohd Zin (2009) The Investigation On The Fatigue Crack Growth On Welded Pressure Vessel Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Ashraf , Ghazali (2014) A study on customer satisfaction using quality function deployment (QFD), kano approach and theory of inventive problem solving (TRIZ) toward product quality. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Rizal , Mohd Shukor (2014) Motion error and accuracy evaluation method for CNC vertical milling machine. Masters thesis, UTeM.

Mohd Khairuldin, Hassan (2014) A New Approach For Industrial Product Inspection Based On Computer Vision And Image Processing Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairulzaman , A Rahman (2009) Automated Guided Vehicle Using Line Following Detection. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Khuzaimi, Mohd Salleh (2012) Processability And Compatibility Analysis Of Thermoplastic Elastomer Filled Reclaimed Rubber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Manshur, Aminuddin (2016) Design Of Automated Guided Vehicle Using Programmable Logic Controller. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Mohd Muammar Gaddafi, Ab Aziz (2011) Mechanism Development Of Flexible Worktable. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nafis , Mohaizi (2008) Product Design Evaluation Of Lucas Hull DFMA Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Najib, Ali Mokhtar and Ahmad Yusairi, Bani Hashim and Mohd Nazrin, Muhammad and Nik Syahrim, Nik Anwar and Nazri Huzaimi, Zakaria (2011) Design And Development Of Sensor Array Consist Of Piezo Element For Fluid Jet Polishing Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nazili , Yaacob (2009) Design And Development Of Pneumatic Gripper For Comau Robot. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Nazrin, Muhammad (2010) BMFG 4813: Sistem Pembuatan (Manufacturing System). [Teaching Resource]

Mohd Nizam , Abu Seman (2007) Design & Implementation Of Pick & Place And Storage Systems Application Using Fanuc Robot & Electro-Pneumatic Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nizam , Kamarudin (2014) A study of product design using an integration of conjoint analysis and TRIZ (Teoriya Resheniya Izobretatelskikh Zadatch) : a case study (product hanger). Project Report. UTeM. (Submitted)

Mohd Noh, Mohd Syahrin Amri (2010) Chipping Free Process For Combination Of Narrow Saw Street(60UM)And Thick Wafer (600UM) Sawing Process. CHIPPING FREE PROCESS FOR COMBINATION OF NARROW SAW STREET (60UM)AND THICK WAFER (600UM) SAWING PROCESS, 1 (1). pp. 1-5. ISSN 1089-8190

Mohd Noor, Zuraida (2017) Development Of Vertical Milling Machine Educational Kit Using Various 3D Printing Methods To Assess Rapid Prototyping Process Capability. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor Hayat, Abu (2010) Develop Product Sustainability Improvement For Automotive Part : A Car Wiper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor Hayat , Abu (2010) Develop Product Sustainability Improvement For Automotive Part- A Car Wiper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Norazali, Zainal Abidin (2011) Machining Development Of A Tripartite Rubber Die Holder. Project Report. UTeM, Melaka Malaysia. (Submitted)

Mohd Norazizul Fadli, Abu Bakar (2006) Manufacturing Modeling And Simulation In Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rahim, Mohd Yusri (2013) Study of optimal machining parameters when machining AISI 304 stainless steel with carbide-PVD coated (TiAIN) cutting tool. Masters thesis, UTeM.

Mohd Rajhan, Said (2006) Design And Analysis of Manufacturing System Using Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Razali, Muhamad (2004) BMFG 2823: Mekanik Gunaan. [Teaching Resource]

Mohd Razali, Muhamad (2005) BMFG 4812: Jurutera Dalam Masyarakat. [Teaching Resource]

Mohd Razali, Muhamad (2006) BMFG 4812: Jurutera Dalam Masyarakat. [Teaching Resource]

Mohd Razali, Muhamad (2009) BMFP 4583: Ekonomi Pembuatan (Manufacturing Economy). [Teaching Resource]

Mohd Razali, Muhamad (2003) BMFR 2123: Rekabentuk Mesin. [Teaching Resource]

Mohd Razali, Muhamad (2013) Deposition And Characterization Of Tin Coated PVD Sputtering Of Magnetized Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Razali, Muhamad (2010) MMFS5023: Design Of Manufacturing Systems. [Teaching Resource]

Mohd Razali, Muhamad (2011) MMFS5043: Facilities Planning. [Teaching Resource]

Mohd Razali, Muhamad (2010) MPSW5033: Engineering And Technology Management. [Teaching Resource]

Mohd Razali, Muhamad and Hassan, Attan (2004) BMFR 2123: Machine Design. [Teaching Resource]

Mohd Raziff, Muhammad Shahmir (2016) Designing A Friendly Campus "Learning Environment" Model For FKP Students Using Product Service System Concept. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridhuan , Mohd Noor (2008) Boronizing Effects On Impact Toughness Of Low Alloy Tool Steel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Ridzuan , Mustapha (2007) DOE Based Modeling In Machining Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rizal, Salleh (2003) BMFP 2513: Kejuruteraan Industri. [Teaching Resource]

Mohd Rizal, Salleh (2007) BMFS 2513: Proses Pembuatan I (Manufacturing Process I). [Teaching Resource]

Mohd Rizal, Salleh (2007) BMFS 2513: Proses Pembuatan I (Manufacturing Process I). [Teaching Resource]

Mohd Rizal, Salleh (2010) MMFS5033: Lean Manufacturing. [Teaching Resource]

Mohd Rizal, Salleh and Chong, Kuan Eng (2003) BMFP 2513: Kejuruteraan Industri. [Teaching Resource]

Mohd Safeai, Nur Maizatul Nadia (2016) Degradation Of Tensile Properties Of Natural Rubber (NR) Composite And Tapioca Starch (TS) Under Soil Burial Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Safwan, Mohd Aszemi (2015) The Design And Development Of Portable Electroless Nickel Plating Apparatus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Saib, Khairul Anwar (2017) Design And Development Of Packaging Machine For Liquid Soap. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Salim, Muhammad Ammar Luqman (2016) Accuracy And Repeatability Analysis Of Industrial Robot Under Loaded Conditions And Various Distances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Salleh, Mat Yusop (2005) Auto Retractable Roof. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sarmin, Mohd Khairul Anuar (2011) A Feasibility Study Of 3D Printer Parameters Optimization By Using Cow Bone Powders. Project Report. UTeM, Melaka. (Submitted)

Mohd Shafadilah , Mashor (2009) Online Monitoring And Control From A Database Server For Manufacturing System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Shah, Hairol Nizam (2018) Local Threshold Identification And Gray Level Classification Of Butt Joint Welding Imperfections Using Robot Vision System. PhD thesis, Universiti Teknikal Malaysia Melaka.

Mohd Shah Fahmi , Zainuddin (2009) A Study On Welding Defects Of Pressure Vessel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Shahadan, Mohd Suan and Mohd Rafie, Johan (2016) Synthesis Of Y1-xAlxBa2Cu3O7-δ Via Combustion Route: Effects Of Al2O3 Nanoparticles On Superconducting Properties. Physica B: Condensed Matter. pp. 1-18. ISSN 0921-4526

Mohd Shahardey, Abd Rahim (2013) Design Of Die For Hot Press Forming In Automotive Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahir, Kasim (2007) BMFR 4113: CAD/CAM. [Teaching Resource]

Mohd Shahir, Kasim (2007) BMFR 4113: CAD/CAM. [Teaching Resource]

Mohd Shahir, Kasim (2008) BMFR 4113: CAD/CAM. [Teaching Resource]

Mohd Shahriman, Sutan (2005) Product Development Using DFA Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahzudin, Saleh (2012) Design And Analysis Of Step Clamp Using Sand Casting And Rapid Prototyping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shuhaimi, Mohammad Ali Arsyad and Zainal Abidin, Zaheera and Roslan, Irda and Anawar, Syarulnaziah (2011) The new services in nagios: network bandwidth utility, email notification and sms alert in improving the network performance. In: International Conference on Information Assurance and Security, 5-8 Dec 2011, Malaysia.

Mohd Shukor, Salleh and Hanizam, Hashim and Mohamad Haidir, Maslan and Wahyono Sapto, Widodo (2011) Analysis Of Springback Phenomenom In Aluminium Sheet Metal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shukor, Salleh (2010) BMFS 2523: Proses Pembuatan II (Manufacturing Process II). [Teaching Resource]

Mohd Shukor, Salleh (2009) DMFD 2323: Proses Pembuatan (Manufacturing Process). [Teaching Resource]

Mohd Shukor, Salleh (2015) Pembangunan Aloi Aluminium Untuk Pemprosesan Logam Separa Pepejal. PhD thesis, Universiti Teknikal Malaysia Melaka..

Mohd Shukree, Saibu (2010) Development Of Material Requirement Planning, A Case Study In Metal Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Soufhwee, Abd Rahman (2010) DMFD 3582: Kawalan Kualiti (Quality Control). [Teaching Resource]

Mohd Soufhwee, Abd Rahman and Lokman, Abdullah and Hanizam, Hashim (2011) Productivity Improvement On Packing Process In Mushroom Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Soufhwee, Abd Rahman (2009) DMFD 3513: Pengurusan Pembuatan (Manufacturing Management). [Teaching Resource]

Mohd Soufhwee, Abd Rahman (2010) DMFD 3513: Pengurusan Pembuatan (Manufacturing Management). [Teaching Resource]

Mohd Soufhwee , Abd Rahman (2013) Development of integrated failure mode and effect analysis (I-FMEA) for automotive industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Soufwee, Abd Rahman (2010) DMFD 3892: Prinsip Pengurusan (Management Principles). [Teaching Resource]

Mohd Suhairi Irwan, Zahari (2008) Mereka Bentuk Sebuah Alat Menoreh Getah Yang Berkuasa Enjin Kecil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syafiq , Ahmad Roseli (2010) Design Improvement Using Design For Manufacture & Assembly (DFMA) Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syafiq Shaik, Abdul Aziz (2013) Development Of Cooling System In Hot Press Forming For Automotive Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syafiq Zhafri, Mohamed Zon (2011) Baby Walker With RFID System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syahiran , Mohamed (2010) Automatic Box Packing Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syahiran , Saramudin (2015) Investigation of defects in transfer moulding process of the automotive glass run channel specifically for the corner joint. Project Report. UTeM. (Submitted)

Mohd Tajwi, Nurul Akmar (2016) Design And Development Of Cylinder LPG Trolley For Domestic Use. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Tarmizi, Anual (2014) Design and analysis of welding fixture based on dynamic load condition. Project Report. UTeM. (Submitted)

Mohd Tarmizi, Muhammad Syafiq (2017) Design And Development Of Portable Pineapple Leaf Fibre Machnice In Pineapple Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Warikh, Abd Rashid (2003) BMFB 2212: Bahan Kejuruteraan. [Teaching Resource]

Mohd Warikh, Abd Rashid (2009) BMFB 3263: Perincian Bahan (Material Characterization). [Teaching Resource]

Mohd Warikh, Abd Rashid (2010) BMFB 4212: Kakisan & Degradasi (Corrosion & Degradation). [Teaching Resource]

Mohd Warikh, Abd Razak (2008) BMFB 4213: Kejuruteraan Kakisan (Corrosion Engineering). [Teaching Resource]

Mohd Yatim, Maria De Valda (2016) Enterprise Resources Planning : A Case Study In Automotive Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yuhazri, Yaakob (2010) BMFB 3273: Komposit & Bahan Termaju (Composites & Advanced Materials). [Teaching Resource]

Mohd Yuhazri, Yaakob (2008) BMFB 3273 / BMFB 4233: Komposit Dan Bahan Termaju (Composite And Advanced Materials). [Teaching Resource]

Mohd Yusof, Nur Qulbiah (2015) Eliminate Waste At Production Line By Implementing Kaizen Approach To Enhance Product Quality. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yuzairi, Yaakob (2009) BMFB 3273: Komposit Dan Bahan Termaju (Material Characterization). [Teaching Resource]

Mohd Yuzairi, Yaakob (2010) BMFG 1833: Mekanik Mesin (Mechanics Of Machines). [Teaching Resource]

Mohd Zafirdan , Mat Amin (2007) Design And Fabricate Vise Using CAD-CAM System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Zaki , Sharifuldin (2009) Stamping Oil Conditioning Monitoring At Miyazu Using Ft-Ir : Water Peak Monitoring For Blanking Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zamri, Mohd So'ad (2009) DFA Using Computer Program. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Zhafri, Mohd Yaacob (2010) Study And Implementation Of Speed Chess Clock. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zuhri , Mohamed Yusoff (2007) A Case Study Of Rapid Prototyping Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulhilmi, Ismail (2012) Appliction Of Value Stream Mapping (VSM) In Cable Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Amran, Md. Ali (2007) BMFS 3343: Alat Pengeluaran (Production Tooling). [Teaching Resource]

Mohd. Azwan , Mohammad (2008) Electromagnetic Chip Collector (EMCC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Hadzley, Abu Bakar (2007) BMFB 4223: Metalurgi Gunaan (Applied Metallurgy). [Teaching Resource]

Mohd. Hadzley, Abu Bakar (2007) BMFS 4343: Teknologi Alat Pemotongan (Cutting Tools Technology). [Teaching Resource]

Muazam Shah, Mohamad (2005) Design A Patient Transfer System Using QFD Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhaizad , Muhiyddin (2010) Production Yield Analysis Of An Automotive Component Using General Linear Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Afiq, Kamal Arifin (2015) Design And Development Of Wooden Mold Base For Educational Kits. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Akmal , Ashaari (2008) Investigating The Welding Parameters Performance Of Spot Welding Process. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhamad Alif , Abu (2010) Motorcycle Anti-Theft System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Arfauz, A Rahman (2006) BMFA 3423: Control System Design. [Teaching Resource]

Muhamad Arfauz, A Rahman (2008) BMFA 3453: Sistem Kawalan Termaju (Advanced Control System). [Teaching Resource]

Muhamad Arfauz, A. Rahman (2007) BMFA 3423: Reka Bentuk Sistem Kawalan (Control System Design). [Teaching Resource]

Muhamad Asri, Zainul (2006) Application Of Design For Assembly Methodology On Automotive Parts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Azim , Azami (2009) Design Of Automatic Tool Changer For Welding Gun Tip. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhamad Fakhruddin, Mohamed Fauzi (2015) An Emotional Design Of Product Using Kansei Engineering : Mathematical Approach Towards Design Profile. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Hanafi, Kudsi (2014) The priorities criteria of product design toward affective quality using technique for order preference by similarity to ideal solution (TOPSIS) and fuzzy TOPSIS case study (Toothbrush). Project Report. UTeM. (Submitted)

Muhamad Hanif , Zahari (2015) Mistake proofing jig a method to improve Risk Priority Number (RPN) in process FMEA. Project Report. UTeM. (Submitted)

Muhamad Husni , Hussein (2015) Development of knee braces for osteoarthritis patient. Project Report. UTeM. (Submitted)

Muhamad Izwan , Mohd Yahya (2016) Study Of Thermal Stress Effect On Ester Oil Using Breakdown And Fourier Transform Infrared Spectroscopy (FTIR) Test. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhamad Nabil Fikri, Ahmad Jawahir (2011) Quality Improvement Analysis By Using Taguchi Method In Small Medium Enterprise (SME) Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Syahrir, Ibrahim (2006) Implementation Of ISO 9001-2000 Inn Higher Education Institutions (KUTKM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Zulhayyie, Che Sarif (2011) Database For Potential Failure Mode And Effect Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad , Adam (2005) BMFG 4912: Keusahawanan Perniagaan. [Teaching Resource]

Muhammad Adeeb, Mokhtar (2008) Development Of Housing Pattern Using Rapid Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Afdhal, Nazan (2015) Design And Development Kossel Mini 3D Printer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aidil, Adnan (2015) Manufacturing Complexity Characterization: Case Study At Micro-Nano Precision Sdn. Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Amir, Mohd Rohzaini (2015) The Development Of Slitting Sheet Metal Machine For Wire Mesh Using Total Design Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ammar, Hassan (2011) The Effect Of Process Conditions In Vacuum Casting Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Asy Syaheed, Abdullah (2013) Effect Of Resin Ratio On Mechanical Properties Of Resin Bonded Sand Mould. Project Report. UTeM, Melaka. (Submitted)

Muhammad Asyraf, Abdul Jalil (2015) Evaluation And Sensitivity Analysis For Selecting The Best Design Of Automotive Fender Using Analytic Hierarchy Process (AHP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ayub, Md Zain (2015) Development Of Control System For MAP 203 Using Human Machine Interface (HMI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Azlan, Arshad (2014) Wireless Production Monitoring System Using ZigBee. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faisal, Musa (2012) Development Of Differential Steering System For A Microcontroller Based Motorized Walking Aid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faiz, Mispul (2008) Material Handling System Development In Factory Using Catia V5 Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fansuri , Muhyaddin (2010) Design For Environment (DFE) Improvement On Electronic Product : A Case Study On A Mobile Phone Housing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Farhan , Mohamed Khalid (2015) The development of in vivo post circumcision (analysis on market testing). Project Report. UTeM. (Submitted)

Muhammad Fauzi, Muslih (2015) Automated Guided Vehicle System (AGV) System With Flexible Direction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdaus, Mohd Razali (2012) Kajian Parameter Terbaik Untuk Robot Kimpalan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdaus , Mustapa (2010) Jawi Characters DOT Matrix LED Sliding Text Displayer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fuad, Mohamed Zan (2011) Study And Analysis Quality Satisfaction In Service Industry (Damansara Specialist Hospital). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hafidz Fazli , Md Fauadi (2007) BMFA 4463: Pembuatan Berbantu Komputer (Computer Integrated Manufacturing). [Teaching Resource]

Muhammad Hafiz , Ahmad (2009) Case Study : A Study On Overall Equipment Effectiveness At Electronics Manufacturing Company. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Hafizan , Yosri (2007) Mobility Sub Sytem For Robotic Oryza Sativa Pesticide Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hafizuddin, Jumali (2015) Development Of Microcontroller-Based Data Acquisition System For Environmental Monitoring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Haikal , Shamshuri (2015) Poka Yoke jig implemantation to improve productivity at manufacturing industry. Project Report. UTeM. (Submitted)

Muhammad Hakim, Ahmad Suhaimi (2016) Dynamic behaviour of biocomposites. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Hannan, Kamarzaman (2013) Study And Analysis Of The Engineering Quality Feelings Based On Affective Response To Dimensional Integration Of Product Shapes Design Case Study [Product - Spectacles]. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hasbi, Baharuddin (2012) A study on automated self-ordering menu using the lens of technology acceptance model : a focus on Klang Valley Restaurant. Masters thesis, UTeM.

Muhammad Haziq, Hasbullah (2015) Design Of Motion Strategy For Mobile Robot In Reconfigurable Manufacturing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hazwan, Arzmi (2013) An Integration Of Affective Engineering In Product Design Analysis - [The Using Of Kano Model With Kansei Engineering For Evaluating The Design Product) - Case Study] (Product - Pen). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Helmi, Jamil (2010) Automatic Part Feeder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Husnan , Zainal Abdin (2013) Enhancing Material Supply System For Improving The Flow Process Of Assembly Line. Project Report. UTeM, Melaka. (Submitted)

Muhammad Iqbal, Sazali (2013) Value Stream Mapping Using Simulation Towards Lean Manufacturing At Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Izwan, Isa (2009) Statistical Analysis Of The Rapid Prototyping 3D Printer Process To Determine Accuracy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Jazmi , Ibrahim (2009) Development Of Spreadsheet Based Programming For Maintenance Management Systems. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Khairul Aizat , Mohd Radzi (2009) Design Improvement On An MPOC Using DFMA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Khairul Anwar, Roslan (2015) Analyse, Develop And Fabricate New Tactical Knife For Military Using Long Forgotten Keris Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Musfarezal, Mustafa (2015) Development Of A Low Cost 3D Scanner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nabil, Ab Kadar (2015) Simulation Of Crash Impact On A Formed Sheet Metal Using Hypercrash And Radioss. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nazrul, Mohd Yusoff (2015) Product Design Improvement Using Design For Manufacture And Assembly (DFMA) Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nor, Nor Nazihah (2016) Development Of Overall Performance Effectiveness (OPE) At The Semiconductor Industry : A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nur Izhar, Abd Rahman (2015) Design And Development Of A Hand-Arm Support : Lifting Wheelbarrow And Loading Banana Fruit Into The Wheelbarrow. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nurul Hafiz , Abdul Malik (2008) Design And Model Making Of Forming Dies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Qasrin Asyraf , Ahmad Shabri (2015) Design and simulation of investment casting mold for obsolete automotive part. Project Report. UTeM. (Submitted)

Muhammad Ridhwan, Mohd Talib (2012) Studies On Dynamic Behaviour Of The Automotive Door Locking System During Impact. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syafik, Jumali (2007) DMFD 3413: Kuasa Bendalir (Fluid Power). [Teaching Resource]

Muhammad Syafiq, Syed Mohamed (2010) BMFP 3513: Kejuruteraan Industri (Industrial Engineering). [Teaching Resource]

Muhammad Syafiq , Samsudin (2011) Development Of Process Flow And Standard Operating Procedures For Madeena Syrup Process Controls. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syafiq , Ahmad Tarmidi (2010) Development Of Statistical Process Control Software For Small Medium Industries (SMI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syazwan, Abdullah (2015) Application Of Axiomatic Design And Additive Manufacturing : A Case Study Of A Door Knob. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syazwi, Mohd Faudze (2015) Investigation Of Characteristics And Applications Of 3-D Printer Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zahid , Kamarudin (2015) Work study analysis to improve productivity at manufacturing process company. Project Report. UTeM. (Submitted)

Muhammad Zufar, Jurij (2011) Computer Integrated Manufacturing (Continuity Electrical Board Checker). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zulhelmi , Ahmad (2014) Development of an automated guided vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Munawar, Rose Farahiyan and Shahril, M. Khairul and Abu, Maisarah and Bani Hashim, Ahmad Yusairi (2014) Green Magnetic Wave Absorber, The Potential Of Paddy Straw And Recycled Paper. Materials Research Innovations, 18. S6-21. ISSN Print ISSN: 1432-8917 ; Online ISSN: 1433-075X

Munirah , Othman (2007) Study On Carburizing And The Kinetics Of Low Alloy Tool Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Murugan , Nagaretinam (2005) Implementing Kobetsu Kaizen Steps In A Manufacturing Company Goodway Rubber Industries (M) Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musa , Juman (2012) STUDY ON MACHINE PERFORMANCE FOR PRODUCTIVITY IMPROVEMENT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustafa, Zaleha (2007) BMFB 4233: Komposit Dan Bahan Termaju (Composite & Advanced Materials). [Teaching Resource]

Mustaq, Mohd Khairul Shahril and Munawar, Rose Farahiyan and Mohamed, Muhd Hafez and Arif, Afraha Baiti and Mohamad, Noraiham and Ab Maulod, Hairul Effendy and Abd Manaf, Mohd Edeerozey and ABD RAZAK , JEEFFERIE (2015) Green magnetic composite sheet from durian shell and nano magnetite particles. Applied Mechanics and Materials, 761. pp. 515-519. ISSN 1660-9336 (In Press)

Muzalna, Mohd Jusoh (2009) BACS 1213: Matematik Kejuruteraan (Engineering Mathematics). [Teaching Resource]

Muzalna, Mohd Jusoh (2009) BACS 1223: Persamaan Pembezaan. [Teaching Resource]

Muzalna, Mohd Jusoh (2010) BMFM 1213: Matematik Kejuruteraan (Engineering Mathematics). [Teaching Resource]

Muzalna, Mohd Jusoh (2008) BMFP 3562: Penyelidikan Operasi (Operational Research). [Teaching Resource]

N

Na'ain , Shari (2009) Stamping Oil Condition Monitoring At Miyazu Using FT-iR. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nadlene , Razali (2016) The Effects Of Chemical Treatment On The Structural And Thermal,Physical, And Mechanical And Morphological Properties Of Roselle Fiber-Reinforced Vinyl Ester Composites. Polymer Composites. pp. 1-14. ISSN 1548-0569

Najil, Makong (2015) Design And Fabrication Of Welding Jigs And Fixtures For FKP Lab. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Najwa , Khalid (2007) Programming Of Vision System For Computer Integrated Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Naqisyah, Nazer (2015) Design Optimization Of Drain Cover Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Narishah, Mohamed Salleh (2013) Transformational of conventional wafer defect disposition system info web base application to improve manufacturing performance. Masters thesis, UTeM.

Nas Mustaqim Walad, Ahmad (2015) Design And Development Of Customized Drinking Bottle For SME. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasarudin, Faizun (2017) Improving Manufacturing Process Through Lean Implementation In Small Scale Manufacturing Workshop. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nashrul Adzim , Nashruddin (2009) Obstacle Avoidance Method For Automated Guided Vehicle (AGV). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nasiruddin, Khairuddin (2008) Fabrication Of Silicone Rubber Mould For Vacuum Casting Machine For Various Part Geometries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasrudin, Nur Fatihah (2017) The Optimization Of Welding Parameter For Joining Mild Steel 1020 Using ABB Metal Inerts Gas (MIG) Robot Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazan, Muhammad Afdhal and Ramli, Faiz Redza and Alkahari, Mohd Rizal and Sudin, Mohd Nizam and Abdullah, M. A. (2017) Process Parameter Optimization Of 3D Printer Using Response Surface Method. ARPN Journal Of Engineering And Applied Sciences, 12 (7). pp. 2291-2296. ISSN 1819-6608

Nazri, Syarifuddin (2017) Development Of Monitoring System In OPerating Theater Using Arduino Ethernet Shield. Project Report. UTeM, Melaka. (Submitted)

Nazri, Syarifuddin (2017) Development Of Monitoring System In Operating Theater Using Arduino Ethernet Shield. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Neoh , Thiam Hwa (2013) Design and simulation of die and punch for sheet metal on bending. Project Report. UTeM. (Submitted)

Ng, Jing Yee (2011) Study And Analysis On Customer Satisfaction : Case Study In Service Company (Bank). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Yuet Wan (2009) A Student On Basin Frame Production : A project Management Approach. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ng, Yuet Wan (2008) A Study Of Basin Frame Production : A Project Management Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, K.C. and Chong, Kuan Eng and Goh, G.G.G. (2013) Total Productive Maintenance Strategy in a Semiconductor Manufacturer: A Case Study. In: 2013 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT, 3-4 Jun 2013, Bayview Hotel Langkawi.

Ng, K.C. and Lim, C.P. and Chong, Kuan Eng and Goh, G.G.G. (2013) Elimination of Waste through Value Add/Non value Add Process Analysis to Improve Cost Productivity in Manufacturing - A Case Study. In: 2013 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT, 10-13 Dec2013, Bangkok, Thailand.

Ng, Mee Chin (2016) A Study To Determine The Best Combination Of FDM Process Parameters Using Taguchi Method To Optimize The Build Time And Surface Quality. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Shay Lee (2016) Bondability and reliability study on various silver plated copper leadframe with 25um wire diameter of gold and copper wire. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ng, Shu Juan (2015) Optimization Of Moulding Composition For Quality Improvement Of Sand Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ngadiman, Yunos (2017) Determining Management Factors Of Overall Equipment Efficiency In Selected Malaysian Public Universities. PhD thesis, Universiti Teknikal Malaysia Melaka.

Ngeow, Sook Chin (2015) A Comparative Study On The Design Efficiency Of Products Using DFMA Methods. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Aziah , Abdul Aziz (2010) PIC-Based Temperature Monitoring System Via CAN Bus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Mohd Faizal, Wan Zulkifli (2008) Oil Particle Analysis-Miyazu 1. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Mohd Farid, Che Zainal Abidin (2008) BMFP 3513: Kejuruteraan Industri. [Teaching Resource]

Nik Nur Faeezan , Nik Yusoff (2015) Second used packaging. Project Report. UTeM. (Submitted)

Nik Zubaidi, Nik Mahmood (2012) Designing And Fabrication Modular Products With The Incorporation Of Diy Assembly Method (Shoe Rack). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nithya , Selvakumaran (2009) Investigation Of Shot Peening On The Fatigue Strength Of Aluminium Alloy. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noh Aideal, Abdul Samad (2005) Parameter Optimization In The Injection Molding Using Taguchi Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Adawiah, Ab Razak (2011) Correlation Between DFMEA And Process Capability At Automotive Part Supplier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Adibah, Mat Isa (2012) The Effect Of Phenolic Resin And Hardener Percentage On Mechanical Properties And Loss On Ignition Resin Bonded Sand Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Aizah , Mahat (2011) Surface Integrity Study In EDM Die Sinking Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Ajian, Mohd. Lair (2008) An Integrated Model For Optimising Manufacturing And Distribution Network Scheduling. PhD thesis, University of South Australia .

Noor Ajian, Mohd Lair (2009) BMFP 3582: Ekonomi Pembuatan (Industrial Ergonomics). [Teaching Resource]

Noor Asmah, Arshad (2010) Design And Fabricate An Optimize Mechanism For Fruit Plucker To Be Commercialized. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Masnira , Muhammed Salleh (2009) Analysis Of Quality Product By Using QFD Method And Satisfaction Criteria On Consumer Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Rawaida , Omar (2012) Redesign Of Perforator Through Integration Of Ergonomics Approach And Quality Function Deployment (QFD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Syarida , Abdul Rahman (2009) Papan Partikel Daripada Sekam Padi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noorazmie Afzam , Muhamad Zaki (2009) Use DFMA Methodology To Analyze On Car Wiper System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noorfazlyanisyuain , Zainal (2015) Application of lean manufacturing using value stream mapping. Project Report. UTeM. (Submitted)

Noorhayati , Shaharudin (2008) Design Of Safety System For Industrial Robots Works Cells. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noorhazirah, Sunar and Mohd Fua'ad , Rahmat and Zool Hilmi, Ismail and Ahmad 'Athif , Mohd Faudzi and Syed Salim , Syed Najib (2014) Model Identification And Controller Design For An Electro-Pneumatic Actuator System With Dead Zone Compensation. INTERNATIONAL JOURNAL ON SMART SENSING AND INTELLIGENT SYSTEMS, 7 (2). pp. 798-817. ISSN 1178-5608

Nooririnah, Omar (2010) DMFD 2222: Sains Bahan (Material Science). [Teaching Resource]

Nooririnah, Omar (2010) DMFD 3253: Bahan Kejuruteraan (Engineering Materials). [Teaching Resource]

Noorzilaiwati , Rosli (2006) Characterization Of Fiberglass Impregnation. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Nor Adila, Nordin (2005) Application Of Lean Principle In Manufacturing Companies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Afandi , Sharif (2007) Manipulator Design For Robotic Oryza Sativa Pesticide Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Affendy, Norizan (2013) A Study And Analysis Of Product Design And Development Using Kansei Engineering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Akramin, Mohamad (2005) BMFP 2513: Industrial Engineering. [Teaching Resource]

Nor Akramin, Mohamad (2006) BMFP 2513: Kejuruteraan Industri. [Teaching Resource]

Nor Akramin, Mohamad (2009) BMFP 4542: Pengurusan Projek (Project Management). [Teaching Resource]

Nor Akramin, Mohamad (2007) BMFP 4543: Pengurusan Projek (Project Management). [Teaching Resource]

Nor Akramin, Mohamad (2008) BMFP 4543: Pengurusan Projek (Project Management). [Teaching Resource]

Nor Akramin, Mohamad (2010) DACS 1273: Statistik Kejuruteraan. [Teaching Resource]

Nor Akramin, Mohamad (2010) DMFM 2212: Matematik Kejuruteraan (Engineering Mathematics). [Teaching Resource]

Nor Akramin, Mohamad and Noor Ajian, Mohd Lair (2004) BMFP 2513: Industrial Engineering. [Teaching Resource]

Nor Asmaa Alyaa, Nor Azlan (2013) Assessment Of Manufacturing Facility Layout Using Systematic Layout Planning (SLP) Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Azlin, Ali (2010) A Case Study Of Kaizen Implementation In SMI. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Diana, Hashim (2008) Time Study Method Implementation In Manufacturing Industry. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nor Fazielah , Darwis (2013) Preliminary Investigation Of Laser Joining. Project Report. UTeM, Melaka. (Submitted)

Nor Ismawati , Natilan (2007) Design And Development Of Computer Program To Determine 2D Robot Workspace And Safe Working Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Izati , Md Salleh (2007) Development Of Standard Time Utilizing Work Method And Time Measurement In QC Department At A Textiles Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Mohd Uzair, Norsahperi (2014) Simulation of automation of pen capping process for EK300 at Sparkle Precision Sdn. Bhd. Project Report. UTeM. (Submitted)

Nor Rafika, Nor Hamid (2013) Identification Of Intermetallic Compound At Cu Wire – Al Bond Pad Interface By Using X-Ray Diffraction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Rashidah , Mohamad (2014) Redesign and efficiency analysis of small scale production line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Rizan , Mohamad (2014) Design of lab-scale pre-pregger machine for in house production of pre-preg material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Safura , Nordin (2014) Process-properties relationship of mild steel orbital welding. Masters thesis, UTeM.

Nor Shahirah, Aladdin (2013) Productivity Improvement Through Application Of Lean Manufacturing Concept : A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Syakiroh , Tajudin (2007) Total Productive Maintenance Implementation In Laboratory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Zamri, Nur Ridha Rifaie (2017) Simulation Of Sprocket By Using Different Tool Paths Process In CAD/CAM Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Zhafarina, Aboo Bakar Merican (2009) Design And Product Development Of Multi-Purpose Rihal Through Concurrent Engineering Tools And Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norafiza, Jama (2011) Design And Develop PCB Half Populated Subsytem Of Management Inventory Systems At Motorola. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noraina Alia, Mat Noor (2015) A Simulation-Based Approach To Decision Support For Lean-Practitioners. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nordianaaida, Abdullah (2015) Convolution Design Profile Toward Kansei Engineering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nordiyanna, Norazemi (2013) Modeling of Stress Developed During Intermetallic Compound Growth at Cu Wire–Al Bond Pad Interface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norfaridatul Akmaliah, Othman and Aryani, Ahmad Latiff and Juhaini, Jabar (2012) The impact of construction supply chain on the implementation of safety management systems. Journal of Techno Social. pp. 1-9. ISSN 2229-8940 (In Press)

Norfauzi, Tamin (2017) Differentiation analysis of surface integrity and wear mechanism AISI 1045 machinability assesment under wet and dry condition. Masters thesis, Universiti Teknikal Malaysia Melaka.

Norhafiza, Mohamed (2008) Development Of An Electronic Schedulling Template For Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhashima, Azmi (2015) Assessing A System Reliability: A Case Study In Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhazwani, Baharudin (2015) Appointment Scheduling In Health Care Industry By Using Modeling And Simulation : A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhidayah, Hashim and Kamat, Seri Rahayu and Isa, Halim and Mohd Shahrizan, Othman (2014) A Study on Push-Pull Analysis Associated with Awkward Posture among Workers in Aerospace Industry. International Journal of Research in Engineering and Technology. pp. 233-239. ISSN 2319-1163

Norhidayah, Hashim and Seri Rahayu , Kamat and Isa, Halim and Mohd Shahrizan, Othman (2014) A study on push-pull analysis associated with awkward posture among workers in aerospace industry. International Journal of Research in Engineering and Technologye, 3 (1). pp. 233-239. ISSN ISSN: 2319-1163

Norhidayah, Mohamed Hussin (2010) An Application Of Statistical Quality Control On Process Improvement: Case Study In Stayrod Manufacturing. Masters thesis, UTeM.

Norlizah, Mat Isa (2005) Temperature Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norsani, Siti Hadijah (2016) Application Of AHP For Determining The Best Of Palm Oil Fresh Fruit Bunch. Masters thesis, Universiti Teknikal Malaysia Melaka.

Norshadatul Akmar , Mat Shadid (2015) Development of green noise barrier using coconut fiber. Project Report. UTeM. (Submitted)

Norsiah, Hami (2015) Sustainable Manufacturing Practice And Sustainability Performance Mediated By Innovation Performance. PhD thesis, Universiti Teknikal Malaysia Melaka..

Norsiah, Hami and Mohd Razali, Muhamad and Zuhriah, Ebrahim (2016) The Impact Of Sustainable Manufacturing Practices On Sustainability. Jurnal Teknologi, 78 (1). pp. 139-152. ISSN 0127-9696

Norsyahida, Sofian (2011) Design And Development Of Robot Arm For Stamping Machine Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norsyahila , Ahmad Sahhidan (2009) Application Of General Flow Pattern In Facility Layout. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur 'Ain, Azmi (2012) Design And Fabricationn Madular Product With The Incorprotion Of Diy Assembly Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Adila , Kamarudin (2015) Handphone triggered switches. Project Report. UTeM. (Submitted)

Nur Afiqah, Abdul Latif (2013) Application Of 7QC Tools To Improve Yield Performance Of Label Stock Product At ABC Company Sdn. Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Aidawaty, Rafan (2008) A Study On The Performance Of An XY Table For Laser Spot Welding. Masters thesis, Universiti Malaya.

Nur Aidawaty, Rafan (2007) BMFA 2413: Sistem Kawalan (Control system). [Teaching Resource]

Nur Aidawaty, Rafan (2010) DMFD 2433: Instrumentasi & Kawalan (Instrumentation & Control). [Teaching Resource]

Nur Aidawaty, Rafan (2007) Development of motion control user interface for XY table. In: International Conference on Engineering and ICT (ICEI 2007), 27 -28 Nov 2007, Hotel Equatorial Melaka. (Submitted)

Nur Aidawaty , Rafan and Zamberi, Jamaludin and Tsung , Heng Chiew and Lokman , Abdullah and Mohd Nazmin , Maslan (2014) Quadrant glitch analysis for ball screw driven positioning stage using friction compensation model feedforward. In: International Symposium on Research in Innovation and Sustainability 2014, 15-16 October 2014, Universiti Teknikal Malaysia Melaka. (In Press)

Nur Aisamuddin , Mohamad (2008) Motorized Worktable For Robotic Application. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Aizatul ' Ain, Md Zahir (2015) Design And Analysis Of Local Fruit’s Pole Picker. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Amalina, Mustafa (2015) Development Of New Shower Head Based On Water Flow Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Amanina, Mahamad Aziz (2015) Factors That Cause The Degradation Of The ERP System In Manufacturing Company In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Asilah, Mastuki (2013) A Customer Affective Quality Analysis Using Analytical Hierarchy Process (AHP) In The Product Development Case Study (Product - Pen). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Atiqah, Md. Sadan (2011) Lean Management Study In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Azizulhakim , Zakaria (2007) Development Of Welding Aid Kit For Shielded Metal Arc Flat Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur El Shahira, Shari (2015) A Study On Productivity Improvement In Production Line By Implementation Of Lean Principles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Farah Izyan, Abd Rahman (2015) Moving Part Combination Using Effort Flow Analysis (EFA) Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Fathana, Mohd Khairol Anuar (2015) Design And Analysis The Optimum Sprue Size For Single Cavity Plastic Name Card Holder Plastic Injection Molding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Fatihah , Madi (2015) The effect of different thickness material stacking for four layer spot welding. Project Report. UTeM. (Submitted)

Nur Halimah, Jamalulil (2015) A Framework To Identify Operational Factors In Overall Equipment Effectiveness (OEE) Towards Lean Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hanisah , Buang (2007) Investigation of Handphone Manufacturing Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hazirah, Mohamad Nasir (2012) Application Of Value Stream Mapping In The Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hidayah , Amir (2009) Life Cycle and Sustainability Of Design On RTV Silicone Rubber Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Izan Syahriah, Hussein (2010) MMFU5023: Advanced Manufacturing Processes. [Teaching Resource]

Nur Izan Syahriah , Hussein and M. N. , Ayof and Tan, Huay Kean (2015) Review on effect of repetitive rework on dissimilar austenistic stainless steel pipes by using GMAW orbital welding. Applied Mechanics and Materials, 789. pp. 146-150. ISSN 1660-9336

Nur Izan Syahriah , Hussein and Segal, Joel and McCartney, Graham and Pashby, Ian (2008) Microstructure formation in Waspaloy multilayer builds following direct metal deposition with laser and wire. Materials Science and Engineering A, 497. pp. 260-269. ISSN 0921-5093

Nur Izzati , Marzuki (2006) Optimizing Number Of Servers For Haemo-Dialysis Fluid (HDF) Production Line At Ain Medicare Sdn Bhd To Increase Efficiency. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Nur Nabila, Mahazid (2013) Effect Of Different Atmosphere For Different Sintering Temperature On Physical And Mechanical Properties Of Sub Micron WC-Co Powder Through The Powder Metallurgy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Nadia Atiqah , Mohamad Dzuhaimin (2015) The adoption of simultaneous engineering (SE) in design-manufacturing interface in automotive new product introduction (NPI). Project Report. UTeM. (Submitted)

Nur Nadia Ramadhani, Md yusuf (2012) Production Operating System A Case Study Of Make To Stock And Make To Order System. Project Report. UTeM, Melaka Malaysia. (Submitted)

Nur Qurratul Ain, Adanan (2015) Evaluation Of Value Stream Mapping Using Simulation In Textile Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Qurratul Ain, Adanan (2016) Integration of six-sigma and Kaizen approached for ball pin quality improvement in Malaysia haberdarshey industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nur Shahirah , Mad Hashim (2009) Rapid Tooling Strategies For Product Customization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Syazana , Mohamed Sultan (2010) DMFD 3892: Prinsip Pengurusan (Principles Of Management). [Teaching Resource]

Nur Syuhada, Hasimuddin (2013) Ergonomic Development Of Shoe Sole Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur'Adinlah, Norman (2015) Reducing Cycle Time To Improve Productivity In Lay-Up Process At Aerospace Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nuralesya, Ramlee (2010) Productivity Improvement In Textile Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nuranisha, Mat Ghani (2007) A Comparison Of Hand Phone Primary Packaging By Using Pugh Method (Case Study). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurasyikin , Araf (2014) Tensile behaviour under thermal degradation of thermoplastic elastomer PP/ENR filled reclaimed rubber. Project Report. UTeM. (Submitted)

Nurazhani , Abas (2008) Evaluatiom Of Product Assembability Using Lucas Hull Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurazliana, Talib (2015) Quality Improvement Through Lean Practice. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurfarhana, Mahmad Toher (2015) A Study On Workforce Innovation Skills Towards Performance Improvement : A Case Study At Sony EMCS (Malaysia) Sdn. Bhd. In Prai, Penang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurhazimah, Mohd Hamka (2015) Implementation Of Value Stream Mapping (VSM) In Textile Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurhidayah , Azmi (2010) RFID Based Door Access System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurjanah, Bahari (2011) Development Quality Function Deployment (QFD) For Employees Satisfaction Through Kano Method And Herzberg Theory Case Study in (Jabatan Perkhidmatan Awam). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurliyana, Zulhanee (2015) Proposing Future Value Stream Mapping For Safety Pin Manufacture. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurliyana, Zulhanee (2016) Quality enhancement on safety pin at textile company using Kaizen approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nursheda , Zainudin (2006) Graphical CIM Process Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nursyahmi, Abdul Sukor (2013) Real-Time Monitoring System For Nursing Home. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Adlina, Mohammad Jamil (2013) The Determination Of Inconsistency Quality Cutting Of Composites Part At Abrasive Waterjet Trim Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Ain , Ismail (2009) Redesign Of A Product Using Boothroyd DFA Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Aini, Ahmad (2013) Overall Equipment Effectiveness Optimization (OEE) In Semiconductor Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Aini , Hamzah (2006) A Study On The Sustainable Product Development (SPD) Practices Among The Malaysian Companies. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Nurul Arbaeyah, Ahmad Yassin (2010) Application Of Relationship Chart Method In Facility Layout. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Asyikin, Adenan (2008) Oil Particle Analysis Using Fourier Transform Infrared Spectroscopy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Farha, Abdul Rahman (2009) Application Of Design Of Experiment For Bell Casting Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hafiza , Ab Ghani (2010) Productivity Improvement In Metal Industry : Work Study Improvement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hafizah , Md Radzi (2008) Manpower Planning Utilizing Work Study At Data Storage Manufacturing Company. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nurul Hatiqah , Harun (2015) Feasible study on dental restoration using time compression technologies. Project Report. UTeM. (Submitted)

Nurul Hidayah, Hamdan (2014) Effect of biodegradable resin ration on the properties of resin onded sand for casting. Project Report. UTeM. (Submitted)

Nurul Khaleeda, Ozman (2015) Analysis Of Material Handling For Automotive Assembly Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Nurain, Dzulkifli (2010) Develop And Propose An Optimum Maintenance Schedule For A Critical Machine At Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Wahida, Hanapiah (2010) Comparison Study Of Press Part Quality Inspection System: Checking Fixture And Faro Arm Laser Scanner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurulhuda, Ahmad (2010) Development Of Automated Maynard Operation Sequence Technique (MOST) Work Study Technique : Case Study At Aerospace Manufacturing Company Using Lean Six Sigma. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurulhuda , Arifin (2009) Study The Effect Of High Temperature Cycle Exposure To Evaluation On Embrittlement Of Welded Pressure Vessel Steel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nurulhuda , Muhamad Nasir (2006) Mechanical Design Of An Automated Guided Vehicle (AGV). Project Report. Melaka, Malaysia, UTeM. (Submitted)

Nusaibah, Mansor and Siti Norbaya, Yahaya and Nurul Zarirah, Nizam and Othman, Aman (2012) Consumers Acceptance Towards Green Technology in Automotive Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

nurul Syuhada, Che Hussin (2012) Implimentation Of Poka Yoke Through DFMEA Stage For Sme Industry In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

O

O., Nooririnah and Abdullah, Rohana and A.Y, Khalil and M.S, Aludin (2013) OVERVIEW POTENTIAL APPLICATIONS OF COLD SPRAY PROCESS FOR AVIATION INDUSTRY IN MALAYSIA. Advanced Material Research, 701. pp. 375-377. ISSN 1022-6680

Octivia, James (2010) Upgrading FMS 200 : Station 5 Using Human Machine Interface (HMI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Omar, Nooririnah and Abdullah, Rohana and ABD RAZAK , JEEFFERIE and Mustafa, Nuzaimah (2013) A REVIEW ON SUPERSONIC PARTICLE DEPOSITION AS POTENTIAL SOLUTION FOR AIRCRAFT METAL MOLD REPAIR. Global Engineers & Technologists Review, 3 (2). pp. 14-16. ISSN 2231-9700

Omar, M.Khaled and Abdullah, Rohana and Abd. Rahman, Md. Nizam (2012) Process and Labour Utilization in The Electronic Industry: A Simulation Approach. In: 6th IEEE International Conference on Management of Innovation and Technology, 10-14 Jun 2012, Sanur, Bali, Indonesia.

Omar, Mohamad Syarafuddin and Jaafar, Hazriq Izzuan and Ghazali, Rozaimi and Mohamad, Syahrul Hisham and Khalil Azha , Mohd Annuar (2015) Investigation Of Single Cart Gantry Crane System Performance Using Scheduling Algorithm. International Journal of Soft Computing and Engineering (IJSCE), 4. pp. 134-138. ISSN 2231-2307

Ong, Chien Chung (2016) Structural Characterisation And Properties Of Lead-Free Solders On Different Surface Roughness Of Copper Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Kah Kah (2016) Productivity Measurement And Improvement In Product Design Process Using Lean Tools Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ooi , Sen Jye (2007) Application Of Modern Product Development Tools In Product Design Development. Project Report. Melaka, Malaysia, UTeM. (Submitted)

P

Pay Jun, Liew (2009) BMFS 2513: Proses Pembuatan I (Manufacturing Processes I). [Teaching Resource]

Perumal, Puvanasvaran (2013) Organizational Vertical & Virtual Integration Model in Implementing Lean Manufacturing Transformation. Journal of Technology Management and Entrepreneurship, 1 (1). pp. 85-99. ISSN 1675-8404

Perumal, Puvanasvaran and Robert, Kerk Swee Tian and Vasu, Suresh (2014) Lean Environmental Management Integration System For Sustainability Of ISO 14001:2004 Standard Implementation. Journal of Industrial Engineering And Management, 7 (5). pp. 1124-1144. ISSN 2104-8423

Perumal, Puvanasvaran A. (2011) A Framework To Develop Tools & Techniques Requirements Methodology For Implementing Lean Manufacturing. In: Proceeding of The Seminar on Science & Its Application in Industry, 2006, Selangor.

Punavasvaran, A. Perumal (2012) People Development System Database In Implementing Lean Process Management. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Puvanasvaran, A. Perumal (2009) People Development System Model For Lean Manufacturing Environment. PhD thesis, Universiti Putra Malaysia.

Puvanasvaran, A. Perumal (2004) TQM Practice in ISO 9000 Certified Manufacturing Company: A Case Study in NSEM. Masters thesis, Universiti Putra Malaysia.

Puvanasvaran, A. Perumal (2005) BMFP 4512: Industrial Management And Cost. [Teaching Resource]

Puvanasvaran, A. Perumal (2010) BMFP 4523: Lean Manufacturing. [Teaching Resource]

Q

Quah, Kai Theng (2016) The Effect Of Inventory Management On Competitive Advantage : A Study On Manufacturing SME In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Qumrul, Ahsan (2010) BMFB 3243: Polimer Kejuruteraan (Engineering Polymer). [Teaching Resource]

R

R. Ahmad , Muhaimin (2008) Critical QA And QC Process Procedures In Pressure Vessel Fabrication. Project Report. UTeM, Melaka,Malaysia. (Submitted)

RAFAN, NUR AIDAWATY and Jamaludin, Zamberi and Chiew, Tsung Heng and Abdullah, Lokman and Maslan, Mohd Nazmin (2014) Contour error analysis of precise positioning for ball screw driven stage using friction model feedforward. In: 12th Global Conference on Sustainable Manufacturing Emerging Potentials, 22-24 September 2014, Johor Bahru, Malaysia. (In Press)

RASSIAH, KANNAN and C, MOHD AS'RI and YAAKOB, YUHAZRI and IP, HAERYIP SIHOMBING (2011) Effect on Mechanical Properties of Hybrid Blended Coconut Coir/Paraffin Wax/LDPE. International Journal of Integrated Engineering, 3 (2). pp. 63-67. ISSN 2229-838X

Radin Zaid, Radin Umar and Nadiah, Ahmad and Isa, Halim (2008) An Anthropometric Evaluation of Workstation Design: A Case Study in an Automotive Industry. In: National Conference on Design and Concurrent Engineering (DECON) 2008 , 28 - 29 October 2008, Melaka, Malaysia..

Rafeek Ahmad, Mohamed Aiman (2015) Reverse Engineering On 3D Scanned Data For CAD/CAM Programming Using Delcam And Catia V5 Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raharja, Alvin Hadiyan (2017) Development of standard time in repacking operation. Project Report. UTeM, Melaka. (Submitted)

Rahim, Siti Lydia (2017) Study Of The Implementation Of Additive Manufacturing At PROTON Using Analytic Hierarchy Process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rahim, Siti Lydia and Maidin, Shajahan (2014) Feasibility Study Of Additive Manufacturing Technology Implementation In Malaysian Automotive Industry Using Analytic Hierarchy Process. Advanced Material Research, 903 (-). pp. 450-454. ISSN 1662-8985

Rahiman, Nur'Ain (2017) Design And Development Of Pineapple Leaf Fibre Extraction Machine. Project Report. UTeM, Melaka. (Submitted)

Raja Izamshah, Raja Abdullah (2007) BMFS 3373: Teknologi CNC (CNC Technology). [Teaching Resource]

Raja Izamshah , Raja Abdullah (2006) BMFS 3373: Teknologi CNC. [Teaching Resource]

Raja Mohd Firdaus , Raja Ghazali (2008) Autonomous Maintenance Programme For Lathe Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramdan, Nur Sufiah Akmala and Bani Hashim, Ahmad Yusairi and Kamat, Seri Rahayu and Ali Mokhtar, Mohd Najib and Asmai, Siti Azirah (2014) On Lower-back Pain and Its Consequence to Productivity. Journal of Industrial and Intelligent Information, 2 (2). pp. 83-87. ISSN 2301-3745

Ramdan, Nur Sufiah Akmala and Bani Hashim, Ahmad Yusairi and Kamat, Seri Rahayu and Asmai, S. A. (2014) Techniques on Video Streaming for Back Pain Prevention. Manufacturing Science and Technology 2(2): 34-44, 2014, 2 (2). pp. 67-74. ISSN 2333-2697

Ramdzan, Amira Husna (2017) Effectiveness Of Green Innovation Towards Business Performance In Selected Manufacturing Industries. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rasiman, Nadia Ilysa (2017) Improving The Accuracy Of Open Source 3D Scanning Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ravindran Nair, Ajay Nair (2012) The Investigation Of The Influence Of Filler Welding Materials On The Microstructure And Hardness Of GTA Welding In Dual Phase Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razakuan, Abd Rahman (2015) Design Of Laboratory Information And Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razali, Ayob (2003) BMFS 2513: Manufacturing Process I. [Teaching Resource]

Razali, Roslina (2016) Redesign Of Weaving Department Layout Using Systematic Layout Planning (SLP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Reyanhealme , Rohanai (2014) Design and analysis of facilities layout for increase production in food industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rina Syahira , Mohd Sharif (2009) Quality Improvement By Using Six Sigma In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Robert@Kerk, Swee Tian (2016) Development Of Lean Environmental Management Intergration System For Sustainbility Of ISO 14001:2004 Standard. PhD thesis, Universiti Teknikal Malaysia Melaka.

Rohaida , Yusuff (2009) Production Efficiency Improvement For Production Line Of Mass Production : A Case Study Using Poka Yoke Concepts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rohaidah, Mahidin (2011) Automatic Detection Using Human Machine Interface (HMI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rohana, Abdullah (2009) BMFP 3513: Kejuruteraan Industri (Industrial Engineering). [Teaching Resource]

Rohana, Abdullah (2009) DMFD 3582: Kawalan Kualiti (Quality Control). [Teaching Resource]

Rohana , Abdullah and Nor Akramin , Mohamad and Mohd Soufhwee , Abdul Rahman (2011) A Study On Bottleneck Operations To Optimize Manpower Planning For Productivity Improvement At A SME Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rohani, Osman (2008) The Study Of Natural Rubber - Polyethylene Polymer Mixing Mathod. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roni Sahroni, Taufik and Ariff, Hambali and Abdullah, Tajul Arfiifn and Sivarao, Subramonian (2012) Design Optimization of Multi Vacuum Manifold for Semiconductor Industry. Malikussaleh Industrial Engineering Journal (MIEJ), 1 (1). pp. 5-10. ISSN ISSN 2302 934X

Roni Sahroni, Taufik and Mohd Shahir, Kasim and Mohd Amran, Md Ali and Effendi, Mohamad (2014) Design and optimization of runner and gating systems for permanent mould casting. In: 24th Design Engineering Systems Division JSME Conference Japan Society of Mechanical Engineers, 17-19th September, JSME Conference Japan Society of Mechanical Engineers, .

Roni Sahroni, Taufik and Sivarao, Subramonian and Ariff, Hambali and Abdullah, Tajul Ariffin (2012) Design of Jigs and Fixtures for Hydraulic Press Machine. Malikussaleh Industrial Engineering Journal. pp. 19-24. ISSN ISSN 2301 934X

Rose Farahiyan, Munawar and Mohd Khairul Shahril, Mustaq Ahmad and Maisarah, Abu and Ahmad Yusairi, Bani Hashim (2014) Green magnetic wave absorber: The potential of paddy straw and recycled paper. Materials Research Innovations, 18 (S6). pp. 21-25. ISSN Print ISSN: 1432-8917 ; Online ISSN: 1433-075X

Rose Farahiyan, Munawar and Nurul Hayati, Jamil and Mohd Khairul Shahril, Mustaq Ahmad and Skh Muhammad, Skh Abdul Rahim and Muhammad Zaimi, Zainal Abidin and Mohd Asyadi Azam, Mohd Abid and Lau, Kok Tee (2015) Development of green composite: Pineapple Leaf Fibers (PALF) Reinforced Polylactide (PLA). Applied Mechanics and Materials, 761. pp. 520-525. ISSN 16609336, 16627482

Rosidah, Jaafar (2006) BMFR 4113: CAD/C. [Teaching Resource]

Rosidah, Jaafar (2005) BMFR 4113: CAD/CAM. [Teaching Resource]

Rosidah , Jaafar (2005) BMFS 3373: CNC Technology. [Teaching Resource]

Roslan, Fauzei (2017) Topological Optimization In 3D Printing Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Noor Nabila Natasya (2017) Study The Influnce Of Aceton To Improve Surface Finish Of 3D Printed Part For ABS And PLA Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Nornarieyza (2017) Layer Adhesion Investigation Of 3D Printer Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roslina, Mohd Nor (2013) Improvement Of Quality Process Control Of Airbus A320 Spoiler Programmed In Composite Technology Research Malaysia Sdn Bhd (CTRM): Process Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosman, Zamri (2010) Development And Evaluation Of Interactive SPC Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosnah , Sahak (2009) Quality Improvement Of Automatic Cutting And Sewing Machine In Polyprolene Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosnani , Che Mamat (2008) The Quality Approach In Kenseisha (M) Sdn. Bhd Company For Electronic Process Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rostam, O and Dimin, M F and Luqman, H H and Said, M R and Keong, Lau Kok and Norazlina, M Y and Norhidayah, M and Shaaban, A (2015) Assessing the significance of rate and time pulse spraying in top spray granulation of urea fertilizer using Taguchi Method. Applied Mechanics and Materials, 761. pp. 308-312. ISSN AMM.761-308

Roy Hanson, Jimit (2015) Analysis Of Preventive Maintenance Planning For Hydrogen Manufacturing Unit (HMU) In Shell MDS (M) Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozali, Mustafa (2006) A Case Study Of Using Six-Sigma (DMAIC) Methodology In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roziana , Abu Nasir (2011) 5S Implementation And People Involvement At Muehlbaeur Technologies Sdn.Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roziman , Ismail (2007) Implementation Problems In Lean Manufacturing : A Study On Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozman, Rozaidi (2016) Design And Development Of Food Waste Compactor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozuli, Nurul Atikah (2016) Design And Analysis Of Optimum Clearance Of An Open Small Thimble Bending Die. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ruzaidi, Zamri (2009) BMFA 4433: Aplikasi Robot (Robot Application). [Teaching Resource]

Ruzaidi, Zamri (2009) BMFA 4463: Pembuatan Berintegrasikan Komputer (Computer Integrated Manufacturing). [Teaching Resource]

Ruzaidi, Zamri (2008) BMFA 4463: Pembuatan Integrasi Komputer (Computer Integrated Manufacturing). [Teaching Resource]

Ruztamreen, Jenal (2004) Measuring Maintenance Performance. Masters thesis, University of Manchester.

Ruzy Haryati, Hambali (2005) A Quality Study Of Part Produced By SLA In Rapid Tooling Application. Masters thesis, University of Portsmouth.

Ruzy Haryati, Hambali (2006) BMFR 3143: Rekabentuk Alat Pengeluaran. [Teaching Resource]

Ruzy Haryati , Hambali (2007) BMFR 3143: Reka Bentuk Alat Pengeluaran (Production Tools Design). [Teaching Resource]

Ruzzana Aida , Mohd Ramin (2006) A Study The Effectiveness Of Fitness Testing In Pressure Vessel Fabrication Industry. Project Report. Melaka, Malaysia, UTeM. (Submitted)

raja seman, raja noor amalina and Munawar, Rose Farahiyan and Abd Razak, Jeefferie and Zulkapli, Nor Najihah and Bistamam, Mohd Shahril Amin and Talib, Elyas and Tunku Kudin, Tunku Ishak and Abdul Manaf, Nor Syafira and Mohd Abid, Mohd Asyadi Azam (2015) Cyclic voltammetry analysis of carbon based electrochemical capacitor in aqueous electrolytes. Applied Mechanics and Materials, 761. pp. 452-456. ISSN 1660-9336 (In Press)

S

S.Chinniah, Eswaran (2017) Comparative Study Between 3D Scanner,Vernier Calliper,And Coordinate Measurement Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

S.THIRU,, CHITRAMBALAM (2010) Effect of Lead Addition in LM6 Alloy Castings. Indian Foundry Journal, 56 (10). pp. 38-42. ISSN 0379-5446

S.THIRU,, CHITRAMBALAM (2010) Rheocasting and Thixocasting: Semi-Solid Casting Technologies. Indian Foundry Journal, 56 (8). pp. 23-27. ISSN 0379 5446

SKH Muhammad , SKH Abd Rahim (2009) A Study On Practice Of Design For Sustainability And Design For Environment Practices In Automotive Industries In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saari, Saadatunur (2016) Quality Enhancement In Fan Cowl Assembly In An Aero Composite Manufacturing Company Using DMAIC Approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sabrina , Dangatil (2008) Design And Model Making Of Bending Die. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Safady, Hammam M. H. (2017) Industrial Robotics In The Lean Enterprise : A Case Study In Semi-Conductor Company. Masters thesis, Universiti Teknikal Malaysia Melaka.

Safian, Mohd Azizul Hikmi and Salleh, Mohd Shukor and Subramonian, Sivarao and Hussein, Nur Izan Syahriah and Sulaiman, Mohd Amri and Yahaya, Saifudin Hafiz (2017) Production Of LM4 Feedstock For Thixoforming By Using Cooling Slope Casting. Journal Of Advanced Manufacturing Technology (JAMT) , 11 (1). pp. 77-90. ISSN 1985-3157

Sahaya Anand, Joseph (2009) BENG 1113: Prinsip Eletrik Dan Elektronik (Principles Of Electrical And Electronics). [Teaching Resource]

Saifuddin , Mohd Isa (2015) A study on TQM's tools and techniques for quality improvement : the case of Malaysian manufacturing industry. Project Report. UTeM. (Submitted)

Saifudin Hafiz, Yahaya (2010) BACS 2222: Kaedah Berangka. [Teaching Resource]

Saifudin Hafiz, Yahaya (2010) DACS 1222: Kalkulus. [Teaching Resource]

Saifudin Hafiz, Yayaha (2010) BMFM 2223: Kaedah Berangka & Matrik Al-Jabar. [Teaching Resource]

Saifudin Hafiz , Yahaya (2009) DACS 2212: Matematik Kejuruteraan (Engineering Mathematics). [Teaching Resource]

Saiful Azhan, Md Zahir (2015) Wear Behavior And Corrosion Resistance Of Nickel Coatings Electrodeposited On Aluminum Alloy 7075 Substrate Via Various Current Density. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sairizal , Misri (2007) Design Improvement On A Method Of Inflating The Inflatable Articles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salasiah, Zakaria (2012) Chemical Safety And Risk Assessment In A Manufacturing Environment. Project Report. UTeM, Melaka Malaysia. (Submitted)

Saleh, Nurul Sazwani (2016) Study Of Puyuh Farm Environment Control System Using PLC Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saleha Bee, M.Mohd Siraj (2008) Workstudy At Lay Up Process In Preparation For An Aerospace Company Value Stream Mapping And Kaizen Implementation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salim, Mohd Azli and Abdullah, Mohd Azman and Putra, Azma (2014) Predicted Transmissibility Of An Experimental Approach For A Laminated Rubber-Metal Spring. American-Eurasian Journal of Sustainable Agriculture, 8. p. 7. ISSN 1995-0748

Salim , Mohd Azli and Putra, Azma and Abdullah, Mohd Azman and Ahmad, Nazirah (2014) Development Of Laminated Rubber-Metal Spring Using Standard Malaysia Rubber Constant Viscosity-60. International Review of Mechanical Engineering (I.RE.M.E.), 8. p. 5. ISSN 1970-8734

Salini, Kasee (2011) Value Stream Mapping Using Simulation In Semiconductor Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salleh, Mohd Shukor and Minhat, Mohamad and Che Zainal Abidin, Nik Mohd Farid and Arep, Hambali (2011) System Framework Tools for Future CNC Machining. In: 2nd International Conference on Mechanical and Manufacturing Engineering (ICME 2011), 6 - 8 June 2011, PICC, Putrajaya.

Salleh, Aboo Hassan (2010) DMFD 2323: Proses Pembuatan (Manufacturing Process). [Teaching Resource]

Salleh, Mohd Shukor and Ishak, Anuar and Mohamad, Effendi and Sukarma, Lukman and Mahmood, Azmi B.R. and A Rahman, Muhamad Arfauz and Yahaya, Saifudin Hafiz and Salleh, Mohd Shukor and Sulaiman, Mohd Amri (2017) Cleaner Production Implementation Using Extended Value Stream Mapping For Enhancing The Sustainability Of Lean Manufacturing. Journal of Advanced Manufacturing Technology (JAMT) , 2289-8 (1). pp. 47-60. ISSN 1985-3157

Salleh, Mohd Shukor and Abdul Rahman, Mohd Hafizi and Ab. Razak, Mohd Suffian and Mohamad Kamal, Mohamad Ridzuan and Marjom, Zolkarnain and Anuar, Liza and Mohamad Saad, Nur Adzly (2018) Design And Optimization Of Front Lower Control Arm (FLCA) For C-Segment Passenger Car. International Journal Of Engineering & Technology, 7. pp. 71-75. ISSN 09754024, 23198613

Salmie Suhana, Saad (2010) Design And Analysis Of Turbocharger By Casting Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salwa, Ismail (2015) Design Optimization Of Fryer Basket Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sam, Mei Lee (2015) Preventive Maintenance Application Of Machineries At Apparel Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samsi, Md. Said (2007) BMFA 3433: Sistem Kecerdikan Buatan (Artificial Intelligence System). [Teaching Resource]

Samsi , Md. Said (2006) BMFA 3433: Sistem Kecerdikan Pembuatan. [Teaching Resource]

Samsudin, Anuar (2009) Robot Gripper Using Microprocessor 68000. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samsudin, Abdul Rahim (2010) DMFD 2113: Rekabentuk Mesin (Machine Design). [Teaching Resource]

San, Chee Hou (2016) The Implementation Of 5S In Manufacturing Industries : A Case Study Of Foreign Workers In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sani, Mohamad Safei (2017) Wear Behaviour Of 3D Printed Part Of Carbon Fibre Reinforced ABS Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sanjay, C (2003) BMFP 2522: Quality And Realibility. [Teaching Resource]

Sanjay, C and Abdul Halim, Hakim (2004) BMFP 2522: Quality And Reliability. [Teaching Resource]

Sapardin, Siti Azureen (2016) Product Improvement Of Cornell CFF-12P Fan By Design For Assembly Method (Boothroyd Dewhurst). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saparuddin, Hasan (2017) Effect Of Spot Weld Tip To The Welding Characteristic Of Dissimilar Resistance Spot Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saptari, Adi (2010) MMFD5033: Management Of Global Manufacturing Operations. [Teaching Resource]

Saptari, Adi (2011) MMFU5033: Pengurusan Operasi Pembuatan Global. [Teaching Resource]

Saptari, Adi and Leau, Jia Xin and Mohamad, Nor Akramin (2015) Optimizing Assembly Line Production through Line Balancing: A Case Study. Applied Mechanics And Materials, 761. pp. 104-108. ISSN 1662-7482

Saptari, Adi and Sabuk, Precilla and Isa, Halim and Effendi , Mohamad and Mohd Rizal , Salleh (2015) The effect of assembly design parameters on assembly time. Journal of Advanced Manufacturing Technology, 9 (1). pp. 78-90. ISSN 1985-3157

Saravanan , Paramasivan (2008) An Assessment Of Quality Control System In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarjuni, Noor Afiqah Nabila (2016) Semisolid Processing Of Aluminium LM6 Alloy Using Cooling Slope Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarvin , Silvarajo (2008) Quality Improvement Using 5S Concept In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarvyeen Babu , Ramakrishnan (2009) Packaging CD And Mini CD Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Semposothy, Sevasothy (2017) Investigation On Vision Lead Over Rejection For D-PAK Package At Testing Operation Using Seven Quality Control Tools. Masters thesis, Universiti Teknikal Malaysia Melaka.

Seri Izzatie , Abd. Azizs (2009) Evaluation On Embrittlement Phenomena For Welded Pressure Vessel Steel Exposed To Hydrogen. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Seri Rahayu, Kamat (2005) BMFA 2423: Instrumentasi Dan Kawalan. [Teaching Resource]

Seri Rahayu, Kamat (2006) BMFP 4593: Ergonomik Industri. [Teaching Resource]

Seri Rahayu, Kamat and Nor Akramin, Mohamad (2004) BMFS 2523: Manufacturing Process II. [Teaching Resource]

Seri Rahayu , Kamat and Mohamad Firdaus , Ain (2014) Design and analysis ergonomics workstation in stamping industry. In: International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), 15 and 16 October 2014, PPS UTeM Melaka.

Seri Rahayu , Kamat and Norhidayah, Hashim (2013) A study on muscle fatigue associated with awkward posture among workers in aerospace industry. Advanced Engineering Forum, 10 (1). pp. 287-292. ISSN 103.26.74.254-27/05/14,09:25:29

Seri Rahayu , Kamat and Norhidayah, Hashim and Isa, Halim (2014) Effect of Working Posture and Hand Grip for Carpal Tunnel Syndrome Among Aerospace Workers. International Journal of Mechanical & Mechatronics Engineering, 14 (01). pp. 1-6. ISSN 2077-124X

Seri Rahayu , Kamat and Norhidayah, Hashim and Mohd Shahrizan, Othman (2014) Diminish muscle activity by changing an anthropometry data with appropriate workstation among workers in aerospace manufacturing industry. In: International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), 15 and 16 October 2014, PPS UTeM .

Shaaban, Azizah and SE, Siang Meng and Mitan, Nona Merry M and Dimin, Mohd Fairuz (2014) Characterization of Biochar Derived from Rubber Wood Sawdust through Slow Pyrolysis on Surface Porosities and Functional Groups. Procedia Engineering, 68 (56). pp. 365-371. ISSN ISSN: 1877-7058

Shaharuddin, Syafiqah (2017) The Effect Of Lean Production Toward Company Performance Is Noodle SME's Company In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shahbodin, Faaizah and Wan Hassim, Wan Haniza and Shibghatullah, Abdul Samad (2014) Solving New Student Allocation Problem (NSAP) With Analytical Hierarchy Process (AHP). Science International (Lahore), 26(5), 1659-1662, 2014, 26. pp. 1659-1662. ISSN 1013-5316

Shahdan Ajib , Omar (2011) The Effect Of Process Parameters On Spot Welds Strength Of 6061 Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahrinna, Mohd Salleh (2015) Improvement Of Overall Equipment Effectiveness In A Haberdashery Manufacturing Company For Productivity Enhancement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahrir, Sahari (2010) Mechanical Properties Determination Of Mild Steel And Stainless Steel Joint Fabricated By MIG Welding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahrom, Mohamad Nur Haqkim (2017) The Effectiveness Of ISO 31000 Implementation In Manufacturing Industries In Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shajahan, Maidin (2005) BMFS 3343: Production Tooling. [Teaching Resource]

Shalizah , Aman Shah (2009) Design Rules Analysis For Sheet Metalworking Using Cad Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shamsuddin, Mohamad Fakhri (2016) Development Of Baby Stroller Automation System Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shamsuddin, Muhammad Nasiruddin (2016) Physical And Mechanical Properties Of Natural Rubber Reinforced Carbon Black For Effect Of Tapioca Starch Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sharaynee, Krishnan (2008) Development Of An Expert System For Welding Process Verification Using MS Visual Basic. Project Report. UTeM, Melaka. (Submitted)

Sharifah Zulaikha, Syed Muhammad Nurdin (2015) Modeling Part Supply System For Automotive Assembly Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shariful Redzuan Naquiddin, Abd Lah (2015) Development Of A Simulation Based Kanban System for Lean Practitioner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shariman, Abdullah (2005) BMFA 4443: Automasi Industri. [Teaching Resource]

Shariman, Abdullah (2009) BMFA 3443 / BMFA 4443 Automasi Industri (Industrial Automation). [Teaching Resource]

Shariman, Abdullah (2008) BMFA 3443: Automasi Industri. [Teaching Resource]

Shariman, Abdullah (2010) BMFA 3443: Automasi Industri (Industrial Automation). [Teaching Resource]

Shariman, Abdullah (2006) BMFA 4443: Automasi Industri. [Teaching Resource]

Shariman, Abdullah (2010) DMFD 3463: Robotik Dan Automasi (Robotics and Automation). [Teaching Resource]

Sheikh Fahmi , Mohamed Bamadhaj (2007) A Study On Quality Tools And Techniques Based On Swot Analysis At CTRM AC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shivarajh, Egambaram (2008) Sustainable Development of Coffeemaker Using Design for Environment (DFE) Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shuhimi, Fairuz Fazillah and Abdollah, Mohd Fadzli and Kalam, M.A. and Masjuki, Hassan and Mustafa, Ashafi’e and Mat Kamal, Sushella Edayu and Amiruddin, Hilmi (2017) Effect Of Operating Parameters And Chemical Treatment On The Tribological Performance Of Natural Fiber Composites : A Review. Particulate Science And Technology, 35 (5). pp. 512-524. ISSN 0272-6351

Shukri , Zakaria (2009) Semi-Automated Lemon Grass Cutter. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Sia, Jia Ling (2013) Industrial Temperature Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sihombing, Haeryip and Halim, Isa and Ab Rahman , Mahmood and Baharudin , Abu Bakar (2014) Kano Model approach for design improvement associated with ergonomics issues in CNC machine design. Journal of Advanced Manufacturing Technology, 8 (2). pp. 61-69. ISSN 1985-3157

Sihombing, Haeryip and M.K., Hafiz and M.Y. , Yuhazri (2012) Taguchis Quality Improvement Analysis of the SME Bread Manufacturing. Global Engineers & Technologist Review, 2 (9). pp. 6-18. ISSN 2231-9700

Sihombing, Haeryip and Rassiah, Kannan and Chidambaram, Parahsakthi (2011) Line Balancing Analysis of Tuner Product Manufacturing. International Journal of Engineering Science and Technology, 3 (6). pp. 5206-5214. ISSN 0975-5462

Sihombing, Haeryip and Yaakob, Mohd Yuhazri and Vasu, Suresh (2011) Peningkatan Mutu Molding Injeksi dengan Metode DMAIC Six Sigma. Jurnal Pasti (Penelitian dan Aplikasi Sistem & Teknik Industri) , 4 (3). 01-14. ISSN 2085-5869

Sim, Chee Seng (2008) An Analysis Of Product Quality By Using Quality Control Method In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Amirah, Mohamad Noor (2015) Productivity Enhancement By Overall Equipment Effectiveness (OEE) Improvement In Harberdashery Industry: A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Balqis Nurilyani , Ibrahim (2007) Study of product architecture for design for maintenance. Project Report. Universiti Teknikal Malaysia Melaka. (Submitted)

Siti Farah Nadiah , Taib (2007) Design Of An Improved Production Layout For A Shoe Making Factory: A Case Study Of A Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Farha , Abdul Manan (2007) Developing The Material In Industry Using 3D Modelling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Farhani , Mohd Amin (2015) Temperature monitoring system for infant incubator using Arduino. Project Report. UTeM. (Submitted)

Siti Hajar, Mohamad and Juhaini, Jabar (2012) Measuring sustainability and competitiveness among Malaysian manufacturers: A conceptual paper. In: Business and Economics Conference: Enhancing Sustainability, Competitiveness and Innovation , 9 July - 11 July, Kota Kinabalu, Sabah, Malaysia.

Siti Hajar, Mohamad and Norfaridatul Akmaliah, Othman and Izaidin, Abdul Majid and Juhaini, Jabar and Mastura, Roni (2013) Customer relationship management (CRM): The impact on SMEs performance. In: 4th Social, Development and Environmental Studies International Conference 2013; Faculty of Social Science and Humanities, 19 March 2013, Universiti Kebangsaan Malaysia, Bangi, Selangor, Malaysia.

Siti Huzaimah, Husin (2005) CIM Control Design Using Grafcet. Masters thesis, Universiti Tun Hussein Onn.

Siti Najatul Aishah, Majid (2015) Design And Fabricate The Model Of An Innovative Plucking Device For Salak Fruit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Noridayu, Samad (2013) A Study Of Value Stream Mapping (VSM) In HPF Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nur Madihah , Apandi (2012) Design And Analysis Of Casting Valve For High Voltage ABC Dead End Clamp By Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nurbaya, Tamin (2009) Improvement Of The Reactor Feed Pump Performance By Implying Six Sigma Method Using The Dmaic Phases. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nurfatihah , Ab Rasid (2014) Waste reduction in textile manufacturing company by value stream mapping implementation. Masters thesis, UTeM.

Siti Rahmah, Mohd Alias (2008) Design Improvement Of A Household Appliance Using DFMA. Project Report. UTeM, Melaka Malaysia. (Submitted)

Siti Rahmah, Shamsuri (2008) DMFD 3253: Bahan Kejuruteraan (Engineering Materials). [Teaching Resource]

Siti Rahmah, Shamsuri (2010) DMFM 1212: Matematik Asas (Fundamental Mathematics). [Teaching Resource]

Siti Rossmah , Omar (2009) A Quality Study Of Parts Produced By Silicone Rubber Mould Using Vacuum Casting Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Sahara , Abdullah Shani (2007) Development Of Robot Selection Strategy For An Application Using Ms Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Shahara, Dolah (2015) Optimization For Maintenance Staffing Needed Using Spreadsheet Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Shamila, Yakabasah (2015) Design Analysis Of Retractable Hose Mechanism Using DFMA Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Zulaiha, Yusoff (2008) Design A Up Side Down Robot Gripper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siva Kumar, Subramaniam (2009) Real Time Production Monitoring System. Masters thesis, UTeM.

Sivanyanam , Subramaniam (2013) Modeling, Prediction And Optimization Of Dilution On Austenitic Stainless Steel (AISI 316L) Surfacing Of Low Carbon Steel (AISI 1020) Using Robotic Arc Welding. Project Report. UTeM, Melaka. (Submitted)

Sivapragasam, Thiliban (2016) Design Of Automatic Loading And Unloading Of Workpiece System For HAAS CNC Milling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sivarao, Subramonian (2003) BMFG 2823: Mekanik Gunaan. [Teaching Resource]

Sivarao, Subramonian (2005) BMFG 2823: Mekanik Gunaan. [Teaching Resource]

Sivarao, Subramonian (2010) BMFG 4812: Jurutera Dalam Masyarakat (Engineer In Society). [Teaching Resource]

Sivarao, Subramonian (2006) BMFS 3363: Teknologi Mesin Peralatan. [Teaching Resource]

Sivarao, Subramonian (2006) BMFS 3363: Teknologi Mesin Peralatan (Machine Tools Technology). [Teaching Resource]

Sivarao, Subramonian (2007) BMFS 3363: Teknologi Mesin Peralatan (Machine Tools Technology). [Teaching Resource]

Sivarao, Subramonian (2008) BMFS 4343: Teknologi Alat Pemotongan (Cutting Tool Technology). [Teaching Resource]

Sivarao, Subramonian (2009) BMFS3323 / BMFS 4353: Proses Pembuatan Termaju (Advanced Manufacturing Processes). [Teaching Resource]

Sivarao, Subramonian (2008) DMFD 2323: Proses Pembuatan (Manufacturing Process). [Teaching Resource]

Sivarao, Subramonian (2010) Design and Development of Unmanned Grass Cutter. LA Publishing, Germany. ISBN 978-3-8433-5267-3

Sivarao Subramonian (2012) SUPA FAST KEY-LESS GRILL LOCKING SYSTEM. PI 2012002778.

Sivarao, Subramonian and Abu Bakar, Muhamad Diah (2009) Automatic Tyre Pressure Controller (ATPC). In: National Conference on Bumiputra Small Medium (SME) Industries, Academy of Malaysian SMEs, 10-11 March, 2009, Putra World Trade Centre (PWTC), Kuala Lumpur.

Sivarao, Subramonian and Mohd Rizal , Salleh and Ahmad, Kamely and Tajul Ariffin, Abdullah and Taufik, - (2011) MECHANICAL PROPERTIES MODIFICATION OF POLYETHYLENE (PE) FOR CaCO3 PARTICULATED COMPOSITES. Advanced Materials Research, 264-26. pp. 880-887. ISSN 10226680

Sivarao, Subramonian and Mohd Rizal , Salleh and Ahmad , Kamely and Tajul , Arifin and Taufik, , (2011) CHARACTERIZING CHICKEN EGGSHELL REINFORCED POLYPROPYLENE (PP). Advanced Materials Research, 264-26. pp. 871-879. ISSN 1662-8985

Sivarao, Subramonian and Nantha, kumar and Taufik, , and Sivakumar, Dhar Malingam and Mohd Amri , Sulaiman and Kassim, M.S (2013) Heat Exchanger Analysis to Reduce Hexane Loss in Palm Kernel Oil Extraction Plant. International Journal of Mechanical and Mechatronics Engineering, 13 (4). pp. 29-33. ISSN 2077-124X

Sivarao, Subramonian and T.J.S, Anand and Ariff, Hambali and Minhat, Mohamad and Azni, Faizul (2010) Review of Automated Machines towards Devising A New Approach in Developing Semi-Automated Grass Cutter. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol: 10 No: 04, 10 (4).

Soleha , Rossdy (2007) A Study On Manufacturing Information Requirements For Electronics Assembly. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Solihin, Muhammad Zulfadhli (2015) Production Defect Reduction By Using Six Sigma (DMAIC) In Rubber Gloves Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Stephanie Mujan , Hamilton (2013) Thermal insulation particle board made from sugarcane bagasse and kenaf fibers reinforced with polythlene. Project Report. UTeM, Melaka. (Submitted)

Su, Zhi Qian (2016) Determination Of Tensile Properties Of Topologically Optimized FDM For End-Used Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Subramaniam, Siva Kumar and Siti Huzaimah, Husin and Yusmarnita, Yusop and Abdul Hamid, Hamidon (2009) Real Time Production Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Subramaniam , Siva Kumar (2006) Production Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Subramonian, Sivarao and Abdul Rahim, Samsudin (2014) Comparison between Taguchi Method and Response Surface Methodology (RSM) in modelling CO2 laser machining. Jordan Journal of Mechanical and Industrial Engineering, 8 (1). pp. 35-42. ISSN 1995-6665

Sudin, Mohd Nizam (2010) THE ROLE OF A SPECIFICATION IN THE DESIGN PROCESS: A CASE STUDY. In: INTERNATIONAL DESIGN CONFERENCE - DESIGN 2010, 17-20 May 2010, Dubrovnik - Croatia.

Sudin, Mohd Nizam (2005) A note on the conceptual design of polymeric composite automotive bumper system. Journal of Materials Processing Technology, 159. pp. 145-151. ISSN 0924-0136

Sudin, Mohd. Nizam and Ramli, Faiz Redza and Tan, CheeFai (2013) FUNCTIONAL MODELLING APPROACH IN THE DESIGN OF AN ELECTRICAL SHOE DRYER. Suranaree Journal of Science and Technology, 20 (4). pp. 279-287. ISSN 0858-849X

Sugumar, Dharmalingam (2010) BMFG 1823: Statik Dan Kekuatan Bahan (Static And Strengh Of Materials). [Teaching Resource]

Suhaily , Mohamad Yusof (2009) Investigation On The Fracture Toughness Of Welded Pressure Vessel Steel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Suhaini, Mamat (2009) BACS 1232: Kimia. [Teaching Resource]

Suhana , Mohd Gazi (2007) Design And Development Casting Mould Pattern (Keris). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sukarma, Lukman (2014) The Critical Role Of TQM, JIT, AND TPM In The Revisiting World Class Manufacturing And Manufacturing Excellence. Applied Mechanics and Materials, 660 (-). pp. 959-965. ISSN 1660-9336

Sukarma, Lukman (2014) Enhancing Firm Competitiveness Through Concurrent Implementation Of TQM, JIT And TPM. Applied Mechanics and Materials, 660 (-). pp. 976-982. ISSN 1660-9336

Sukarma, Lukman and Azmi, Hafizah (2015) The Measures Of Performance For World Class Manufacturing Practices: A Critical Review. Applied Mechanics and Materials, 761 (-). pp. 545-549. ISSN -

Sukarma, Lukman and Azmi, Hafizah and Abdullah, Nurlisa Loke (2014) The Impact Of World Class Manufacturing Practices On Company Performance : A Critical Review. Applied Mechanics and Materials, 564 (-). pp. 727-732. ISSN 1660-9336

Sulaiman, M. N. I. and Choo, Yun Huoy and Chong, Kuan Eng (2011) Ant Colony Optimization with Look Forward Ant in Solving Assembly Line Balancing Problem. In: 3rd Conference on Data Mining and Optimization (DMO), 28-29 June 2011, Selangor, Malaysia.

Sulaiman, Mohd Amri (2006) Fatigue analysis on die insert of connecting rod in closed die forging process. Masters thesis, Universiti Putra Malaysia .

Sulaiman, Sabikan (2010) Design And Develop Wireless Based Control Of Industrial Robotics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sumaidy, Eliyana Sari (2016) Ergonomic Design Chair For Postpartum Mothers. Masters thesis, Universiti Teknikal Malaysia Melaka.

Suraya, Laily and Mohd Amran, Md Ali and Nur Izan Syahriah, Hussein and Muhamad, Mohd Razali and RAJA ABDULLAH, RAJA IZAMSHAH and Taufik, Roni Sahroni (2014) The effect of EDM die-sinking parameters on surface integrity for aluminium composite using copper electrode. In: International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), 15 and 16 October 2014, PPS UTeM .

Suresh, Vasu (2014) Lean-environmental management system integration model. Masters thesis, UTeM.

Suriati, Akmal and Ruzy Haryati , Hambali (2009) Moulding Process For The Malaysia Traditional Cookies (Cakar Ayam). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suriati, Akmal (2007) BMFP 3543: Kejuruteraan Metrologi (Engeering Metrology). [Teaching Resource]

Suriati, Akmal (2008) BMFG 1823: Statik Dan Kekuatan Bahan (Static & Strength Of Materials). [Teaching Resource]

Suriati, Akmal (2007) BMFP 3543: (Engineering Metrology). [Teaching Resource]

Suriati, Akmal (2006) BMFP 3543: Metrologi Kejuruteraan. [Teaching Resource]

Sutiati, Akmal (2009) BMFG 1823: Statik Dan Kekuatan Bahan (Static & Strenght Of Materials). [Teaching Resource]

Suzilawati , Abdullah (2009) Application Of SWOT Analysis As A Management Tool For Analyzing Competitiveness Of A Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syafiq, Ramli (2013) Manufacturing Process Selection For Circular Blade Using Analytical Hierarchy Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syamimi, Shamsuddin (2007) Automasi Industri (Industrial Automation). [Teaching Resource]

Syamimi, Shamsuddin (2010) BMFA 2413: Sistem Kawalan (Control System). [Teaching Resource]

Syamimi, Shamsuddin (2009) BMFA 2433: Sistem Mekatronik (Mechatronics System). [Teaching Resource]

Syamimi, Shamsuddin (2007) BMFA 4443: Automasi Industri (Industrial Automation). [Teaching Resource]

Syaqayum Zaiman, Abd Rahman (2010) Application Of Value Stream Mapping (VSM) In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syazwani, Mohd Hashim (2015) A Methodology To Develop Ontology Of Additive Manufacturing Using Formal Attributes Specification Template (FAST). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Idris, Syed Muhammad Al-Amin (2017) Fabrication Of Complete Denture Via 3D Printing Technology With Reverse Engineering Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Syed Mohd Fadly , Syed Hassan (2007) Reverse Engineering Of Dogbone Mould Into Another Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Mohd Fadzil, Sharifah Nurul Jannah (2017) Development Of Electronic Component Rack System By Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Salim , Syed Najib and Mohd Fua'ad , Rahmat and Noorhazirah, Sunar and Ahmad 'Athif , Mohd Faudzi and Zool Hilmi, Ismail and Shamsul Anuar, Shamsudin (2014) Practical robust control using Self-regulation Nonlinear PID controller for pneumatic positioning system. In: Proceeding of International Conference on Electrical Engineering, Computer Science and Informatics (EECSI 2014), 20-21 August 2014, Yogyakarta, Indonesia.

Syed Salim , Syed Najib and Rahmat, Mohd Fua'ad and Mohd Faudzi, Ahmad 'athif and Ismail, Zool H. and Sunar, Noorhazirah and Sharatul Izah, Sharatul Izah (2013) TRACKING PERFORMANCE AND DISTURBANCE REJECTION OF PNEUMATIC ACTUATOR SYSTEM. In: Control Conference (ASCC), 2013 9th Asian, 23-26 June 2013, Istanbul.

Syed Salim , Syed Najib and Rahmat, Mohd Fua’ad and Mohd Faudzi, Ahmad ’Athif and Ismail, Zool H. and Sunar, Noorhazirah (2014) Position Control of Pneumatic Actuator Using Self-Regulation Nonlinear PID. Position Control of Pneumatic Actuator Using Self-Regulation Nonlinear PID. pp. 1-12. ISSN 1024-123X

Syed Syamsudin, Abdul Hakim (2017) Balancing Equipment For High RPM Pulley. Project Report. UTeM, Melaka, Malaysia. (Submitted)

sabikan, sulaiman and Syed Salim , Syed Najib and Sulaiman , Marizan and Miskon, Muhammad Fahmi (2008) Vision-Based Navigation Of An Autonomous Guided Vehicle For Tracking. In: National conference of Design and Concurrent Engineering, 28-29 Oktober 2008 , Universiti Teknikal Malaysia Melaka, . (Submitted)

T

T. Joseph, Sahaya Anand (2009) BMFB 4273: Semiconduktor (Semiconductor). [Teaching Resource]

Taharim, Nor Najwa (2017) Quality Improvement In Manufacturing Industry By Using DMAIC Approach. Project Report. UTeM, Melaka. (Submitted)

Tajul Ariffin, Abdullah and Taufik, , and Sivarao, Subramonian (2011) Design And Analysis Of Car Heat Remover Based On Design For Sustainability Using Rapid Prototyping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tajul Ariffin, Abdullah (2008) BMFR 4143: Rekabentuk Untuk Pembuatan & Pemasangan (Design For Manufacturing & Assemble). [Teaching Resource]

Tajul Ariffin, Abdullah (2010) BMFR 4173: Rekabentuk Untuk Persekitaran (Design For Environment). [Teaching Resource]

Tajul Arus, Muhammad Syazwan (2016) Examining The Relationship Between The Maintenance Machine Downtime And Firms's Production Yield: The Case Of Manufacturing Companies In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tam, Yau Yin (2016) Modelling Overall Equipment Effectiveness Improvement With Overall Production Cost. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tamby Suleiman, Nurusshahidah (2016) Waste Reduction By Implementing Kaizen Activities In Textile Manufacturing Company. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tan, Beng Hong (2013) Design, Optimization And Prototyping Of Multipurpose Weld Electrode Holder. Project Report. UTeM, Melaka. (Submitted)

Tan, CheeFai and Ismail, N. (2013) Design of a Feature Recognition System for CAD/CAM Integration. World Applied Sciences Journal, 21 (8). pp. 1162-1166. ISSN 1818-4952

Tan, CheeFai and Ismail, N. and Ranjit, S.S.S. (2013) Feature Recognition System for Rotational Features. Journal of Applied Sciences. ISSN 1812-5654

Tan, Kah Ee (2011) Impact Of Forecast Modeling On Cost Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Kui Siong (2010) Implementation Of Production Schedule Board To Decide Standard Production Time In Manufacturing Industry (Case Study: Asia Roofing Industries Sdn Bhd). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, CheeFai and Mohd Rizal, Alkahari and Ranjit Singh, Sarban Singh (2011) Water pressure loss analysis of mobile machine for fire figthing purpose. International Journal of Soft Computing and Engineering (IJSCE). pp. 437-440. ISSN 2231-2307 (Submitted)

Tan, CheeFai and Ranjit, S.S.S. (2012) An Expert Carbide Cutting Tools Selection System for CNC Lathe Machine. International Review of Mechanical Engineering, 6 (7). pp. 1402-1405. ISSN 1970-8734

Tan, Choon Heong (2015) The effectiveness of Electronic Data Interchange (EDI) between different sites of production with new manufacturing executive system (CAMSTAR). Masters thesis, Universiti Teknikal Malaysia Melaka.

Tan, Huay Kean (2015) Effect Of Repetitive Rework On Dissimilar Austenitic Stainless Steel Pipes By Using GMAW Orbital Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Kian Heong (2016) Non-sticking on ground ring improvement for copper wire bonding with DMAIC approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tan, Lee Ping (2016) DMAIC Approach To Reduce Total Duration Of Prototyping Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Mei Yi (2015) Investigation Of Optimum Parameters Of FDM Rapid Tooling Pattern For Sand Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Terence Kah Haw (2016) The Influencing Factors Of Technology Adoption That Could Enhance Manufacturing Processes In Paper Mill Company : A Case Study Of Yeoung Chaur Shing Paper Mill Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Wei Chen (2011) Upgrade FMS200 : Station 4 Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Xihan (2017) A Study Of Future Of Manufacturing In The Context Of Developed Countries. Technical Report. UTeM, Melaka. (Submitted)

Tan , Chin Nam (2011) Productivity Performance Improvement In A Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan , Choon Leong (2014) Implementing TPM approach in semiconductor company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan , Soo Yeen (2014) The reduction of defect on label print operation in hard disk drive assembly through lean concept. Masters thesis, UTeM.

Tang, Mei Shick (2017) The Influence Of Process Parameters On Mechanical Properties Of Fused Deposition Modeling Parts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tarmeze @ Ghazali, Ahmad Afiq (2016) Study Of Accuracy Of Molar Teeth Prototype Produced By Powder And Liquid Base Layer Manufacturing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Taufik, and Mohd Rizal, Salleh and Sivarao, Subramonian and Tajul Ariffin, Abdullah (2012) Desing Of An Organic Battery For Residentail Purpose Using Design For Sustainability And Rapid Prototyping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Taufik, , (2010) BMCG 2123: Pemindahan Haba (Heat Transfer). [Teaching Resource]

Taufik, , (2009) BMFG 2813: Termo Bendalir (Thermo Fluid). [Teaching Resource]

Taufik, , (2008) BMFG 2813: Termo-Bendalir (Thermo Fluid). [Teaching Resource]

Taufik, , (2009) BMFR 2123: Rekabentuk Mesin (Machine Design). [Teaching Resource]

Taufik, , (2010) BMFR 3143: Rekabentuk Alat Pengeluaran (Production Tool Design). [Teaching Resource]

Taufik, , (2010) BMFR 4152: Design Case Studies. [Teaching Resource]

Taufik, - (2007) BMFG 2813: Termo-Bendalir (Thermo-Fluids). [Teaching Resource]

Taufik, - (2005) BMFR 3143: Production Tooling Design. [Teaching Resource]

Taufik, Roni Sahroni and Hambali, Arep@Ariff (2011) Design and Simulation on Investment Casting Mold for Metal Matrix Composite Material. Journal of Applied Mechanics and Materials, 66-68. pp. 1676-1681. ISSN 1660-9336

Taufik, Roni Sahroni and Hambali, Arep@Ariff and Tajul Ariffin , Abdullah and Md Dan, Md Palil (2011) Design of Car Heat Remover Based on Product Design and Development Methodology. Journal of Advanced Manufacturing Technology (JAMT) , 5 (2). pp. 59-68. ISSN 1985-3157

Taufik, Roni Sahroni and Mohd Rizal , Salleh and Hambali, Arep@Ariff (2011) Nonlinear Thermal Expansion Model for SiC/Al. World Academy of Science, Engineering and Technology, 78. pp. 923-927. ISSN 1307-6884

Taufik, Roni Sahroni and Tajul Ariffin, Abdullah (2011) Design Simulation of Filing Sequence and Solidification Time for Cast Metal Matrix Composite by Low Pressure Die Casting. International Review of Mechanical Engineering Journal (I.RE.M.E.), 5 (20). pp. 315-320. ISSN 19708734

Taufik, Roni Sahroni and Tajul Ariffin, Abdullah and Sivarao, Subramonian (2011) Design and Simulation on Compressor Metal Matrix Composite by Investment Casting. Advanced Materials Research, 264-26. pp. 403-408. ISSN 10226680

Taufik, Roni Sahroni and Tajul Ariffin , Abdullah and Sivarao, Subramonian (2011) Design and Simulation on Cast metal Matrix Composite by Investment Casting. Advanced Materials Research, 264-26. pp. 323-328. ISSN 10226680

Tayalan , Patmanathan (2014) Enhancement of vision inspection method for multiple gap products. Masters thesis, UTeM.

Tee, Chu Ling (2010) Quality Improvement In The Manufacturing Industry An Application Case. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Chee Hong (2015) Design Flexibility Study For Product Development Using Direct Modeling CAD System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Shaw Ting (2017) A Study On Effect Of Process Parameters In Sheet Metal Forming Simulation Of AA5052. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tengku Ahmad Dzilkarnain, Tengku Mohamad (2014) Investigation based on design of experiment for woven composite deformation. Project Report. UTeM. (Submitted)

Tengku Ezura, Tengku Mansor (2015) Design And Testing Of Automation Control For Mini Gula Melaka Production System Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tengku Mohd Saalahuddin, Tengku Nordin (2008) Product Design Optimization Using Design For Manufacture And Assembly Approaches. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teo, Phaik Yuan (2017) Optimisation Of Poka-Yoke Concept To Develop A Prism Jig Assembly For Semiconductor Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Teoh, Yong Siang (2011) Implementation Of FMEA And Waste Elimination In Company Muehlbauer (Assembly Company). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teoh , Yong Siang (2013) Customer demand and planning efficiency in overall equipment effectiveness (OEE). Masters thesis, Universiti Teknikal Malaysia Melaka.

Tey, Sock Chien (2016) Influence Of Gold Silver Plating Thickness On Palladium Coated Copper Wire On Stitch Bonding. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tey, Sock Chien and Lau, Kok Tee and Mohamad Noor, Mohd Hafizul and Tham, Yon Loong and Abd Manaf, Mohd Edeerozey (2015) Stitch Bonding Strength of Cu Wire on AuAg/Pd/Ni Preplated Cu Leadframes: Influence of AuAg Thickness. Applied Mechanics and Materials, 761. pp. 364-368. ISSN 1662-7482

Thang , Jun Boon (2010) Visual Interface To Controlling A Dot Matrix LED Display. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Thoguluva, Raghavan (2009) BMFB 3253: Metalurgi (Metallurgy). [Teaching Resource]

Thoguluva Raghavan, Vijayaram (2008) BMFB 4223: Metalugi Gunaan (Applied Metallurgy). [Teaching Resource]

Thoguluva Raghavan, Vijayaram (2009) BMFS 3333: Proses Bukan Logam (Non Metallic Processes). [Teaching Resource]

Thoguluva Raghavan, Vijayaram (2008) BMFS 3333: Proses Bukan Logam Non Metallic Processes). [Teaching Resource]

Thurairaj , Arumugam (2009) Development Of TPM Spreadsheet For Laboratory. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ting, Hui Yin (2017) Investigation Of The Effect Of Raster Angle And Layer Thickness On Mechanical Properties Of Fused Deposition Modeling (FDM) Parts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tioh, Boon Peng (2005) Sensory System For Industrial Robot Automation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tiong, Xiang Kai (2016) Design Of Wireless Industrial Robotic Arm And Control Using Android Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Toh, Hui San (2017) Sustainability Key Performance Indicators (Kpis) For Healthcare Industry Using Analytic Network Process (ANP). Project Report. UTeM, Melaka. (Submitted)

Toibah, Abd Rahim (2010) BMFB 4253: Seramik Kejuruteraan (Engineering Ceramics). [Teaching Resource]

Tormudzi, Umi Nurnajeha (2017) A Study On Profile Design Using Kano-AHP Approach For Baju Muslimah Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tshai, Chen Tong (2008) An Analysis On Facility Layout Using Systematic Layout Planning - Case Study In Lighting Manufacturer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

V

Vinod Kumar, Isweran (2015) Multiple Valve Spring Compressor (MVC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Voon, Pei Hee (2007) Versatile Dot Matrix Display With Time Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

Waheeda Hanim, Ab. Rahman (2005) Quality Improvement In Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wahyono, Sapto Widodo (2010) Design of New Punch Geometry to Reduce Force in Sheet Metal Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wahyono Sapto, Widodo (2010) BMFR 3153: Analisis Kejuruteraan Berbantu Komputer (Computer Aided Engineering Analysis). [Teaching Resource]

Wahyono Sapto, Widodo (2008) BMFR 3153: Analisis Kejuruteraan Berbantu Komputer (Computer Aided Engineering Design). [Teaching Resource]

Wahyono Sapto, Widodo (2010) BMFR 4113: CAD/CAM. [Teaching Resource]

Wahyono Sapto, Widodo (2009) BMFR 4163: Analisa Kejuruteraan Berbantu Komputer (Computer Aided Engineering Analysis). [Teaching Resource]

Wahyono Sapto, Widodo (2009) Statik & Dinamik (Static & Dynamics). [Teaching Resource]

Wan Ahmad Fitri, Johari (2012) A Study On The Failure Analysis Of The Tig Welding With Dissimilar Joint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Azhari, Wan Noor Azrina (2016) Effect Of Injection Moulding Parameters On The Shrinkage Using Taguchi Method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wan Fadilah , Wan Jamaludin (2006) Intelligent Part Recognition And Auto Storage Using Feature-Based Modelling Withing CAD System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Wan Hasrulnizzam, Wan Mahmood (2009) BMFP 2522: Kualiti Dan Kebolehpercayaan (Quality And Reliability). [Teaching Resource]

Wan Hasrulnizzam, Wan Mahmood (2006) BMFP 3523: Pengurusan Kualiti. [Teaching Resource]

Wan Hasrulnizzam, Wan Mahmood (2007) BMFP 3523: Pengurusan Kualiti (Quality Management). [Teaching Resource]

Wan Hasrulnizzam, Wan Mahmood (2008) BMFP 3523: Pengurusan Kualiti (Quality Management). [Teaching Resource]

Wan Hasrulnizzam, Wan Mahmood (2007) BMFP 4563: Strategi Pembuatan (Manufacturing Strategy). [Teaching Resource]

Wan Hasrulnizzam, Wan Mahmood (2008) BMFP 4563: Strategi Pembuatan (Manufacturing Strategy). [Teaching Resource]

Wan Hasrulnizzam , Wan Mahmood (2006) A Study On Lean Manufacturing In Aerospace Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Hasrulnizzam , Wan Mahmood and Zuhriah, Ebrahim (2007) Development Of An Office Total Productive Maintenance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Ismail, Wan Nor Afifah (2015) Applying 7QC Tools To Measure Product Quality Performance At Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Ismail, Wan Syarma Adila (2016) Implementation Of Quality Method To Improve Procedure In Handling Quality Issue At SME Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba (2012) Model Persamaan Struktural untuk Mengkaji Kesan Pengurusan Rantaian Pembekalan Hijau dalam Industri Pembuatan. Jurnal Teknologi, UTM, 59. pp. 21-27. ISSN 0127-9696

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba (2011) A Comparative Analysis of Supplier Performance Measures for Malaysian Aero Composite Manufacturing Companies: Case Study. In: 15th International Conference on ISO & TQM (ICIT 15), 26-28 July 2011, Kuala Lumpur, Malaysia.

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba (2011) Do Manufacturing Performance leads to Green Supply Chain Practices? In: 15th International Conference on ISO & TQM (ICIT 15), 26-28 July 2011, Kuala Lumpur, Malaysia.

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba (2011) Green Practice in the Supply Chain: The Case of Malaysian Aero Composite Manufacturing Industry. In: ADVANCED PROCESSES AND SYSTEM IN MANUFACTURING APSIM 2011, 14-15 December 2011, Kuala Lumpur, Malaysia.

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba (2012) Green Supply Chain Management in Malaysian Aero Composite Industry. Jurnal Teknologi, UTM, 59. pp. 13-17. ISSN 0127-9696

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba (2011) The Relationship between Manufacturing System Performance and Green Practices in Supply Chain Management. In: ICME 2011 : International Conference on Manufacturing Engineering, 28-30 December 2011, Venice, Italy.

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba (2009) Spreadsheet simulation for industrial application: a case study. In: International Conference on Quality, Productivity and Performance Measurement (ICQPPM'09), 16-18 November 2009, Putrajaya, Malaysia.

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba and A.G., Jaharah (2011) Improving Production Line Performance:A case study. Applied Mechanics and Materials, 44-47. pp. 4136-4140. ISSN 1660-9366

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba and Abdul Ghani, Jaharah (2010) Improving Production Line Performance: A case study. In: 2010 INTERNATIONAL CONFERENCE ON FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE, 11-12, December 2010, Chongqing, China.

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba and Ismail, Ahmad Rasdan (2011) Product and Vendor Development Programme in Encouraging Supply Chain Management: A Case Study. Applied Mechanics and Materials, 44-47. pp. 4141-4145. ISSN 1660-9366

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba and Ismail, Ahmad Rasdan (2010) Product and Vendor Development Programme in Encouraging Supply Chain Management: A Case Study. In: 2010 INTERNATIONAL CONFERENCE ON FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE, 11-12, December 2010, Chongqing, China.

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba and Mazli, Husiah (2011) Maintenance management system for upstream operations in oil and gas industry: a case study. Int. J. Industrial and Systems Engineering, 9 (3). pp. 317-329. ISSN 1748-5037

Wan Mahmood, Wan Hasrulnizzam and Abdullah, Ilyana and Md Fauadi, Muhammad Hafidz Fazli (2015) Translating OEE Measure Into Manufacturing Sustainability. Applied Mechanics and Materials, 761 (-). pp. 555-559. ISSN 1660-9336

Wan Mahmood, Wan Hasrulnizzam and Mat Tahar, Nurulain and Ab Rahman, Mohd Nizam and Md Deros, Baba (2011) Supply chain enhancement through product and vendor development programme. Journal of Modelling in Management, 6 (2). pp. 164-177. ISSN 1746-5664

Wan Mahmood, Wan Hasrulnizzam and Mohamed, Norhafiza (2008) The Effectiveness of Electronic Scheduling Template: Case Study on Composite Based Product’s Company. In: International Conference on Science and: Application s in Industry and Education ( ICSTIE 2008), 12-13, December 2008, Penang, Malaysia.

Wan Mahmood, Wan Hasrulnizzam and Mohd Rosdi, Mohd Noor Hanif and Muhamad, Mohd Razali (2014) Formulating The Strategy In Managing Manufacturing Complexity : A Pre-Review. Science International-Lahore, 26 (5). pp. 1849-1853. ISSN 1013-5316

Wan Mahmood, Wan Hasrulnizzam and Yusup, Muhamad Zaki and Salleh, Mohd Rizal and Mohd Yusof, Azrul Shahimy (2015) The Relation Between Manufacturing Sustainability And Lean Production In Malaysian Industries An Initial Study. Applied Mechanics and Materials, 761 (-). pp. 560-565. ISSN -

Wan Mohd Salihin, Wan Mustafa (2008) Smart Bottle Packing System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Wan Noor Azrina , Wan Azhari (2007) Observation Of Quality Inspection Standard For Shoe-Making Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nor Azman, Wan Ainul Syafika (2016) Study And Analysis Physiognomic Toward The Product Design (Kansei Engineering). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Noridayu , Wan Mansor (2011) Forecasting Highly Irregular Demands. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nurul Effah, Wan Roslan (2015) Application Of Graph-Based Method For Manufacturing Layout Evaluation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Yaacob, Wan Nur Hidayah (2016) An Analysis And Measurement For The Customer Design Preferences. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wang, Chenqing and Abdul Rahman, Azrul Azwan and Seliger, Günther (2012) A Case Study: Feasibility and economic analysis for advanced automation in spoke rim assembly for motorcycle towards sustainability. In: Sustainable Manufacturing - Shaping Global Value Creation. Springer Berlin Heidelberg, pp. 387-392. ISBN 978-3-642-27289-9

Warikh, Abd Rashid and Zulkifli, Rosli and Jariah, Mohamad Juoi (2004) BMFB 2212: Bahan Kejuruteraan. [Teaching Resource]

Widodo, Wahyono Sapto (2007) BMFG 1823: Statik & Kekuatan Bahan (Static & Strenght Of Materials). [Teaching Resource]

Wong, Foo Yong (2016) The Study Of Critical Factor That Affect The Efficiency Of Kanban System In Production Line: A Study Of Paper Mill Industrial. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Kuan Lih (2015) Using Visual Management Tool To Error Proof WIP Lots Withdrawal In Semiconductor Manufacturer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong , Yun Shi (2012) Quick Response Manufacturing (QRM) In Job Shop Environment. Project Report. UTeM, Melaka Malaysia. (Submitted)

Wong , Nelson Wye Leong (2010) Improve Product Sustainability Through DFE Approach On Design Of Home Appliances : A Case Study On Electric Iron. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Y

Yaakob, Mohd Yuhazri and Husin, Mohd Amirhafizan and Saijod, Lau and Abdullah, A. and Yahaya, Saifudin Hafiz (2017) Potentiality Of Utilising Non-Woven Kenaf Fibre Composite For Car Door Map Pocket. Journal of Advanced Manufacturing Technology (JAMT) , 11 (2). pp. 129-138. ISSN 1985-3157

Yaakub , Juliana and Mohamad, Noraiham and Abd Razak, Jeefferie and Lau, Kok-Tee and Abd Manaf, Mohd Edeerozey and Shueb, Mohammed Iqbal (2015) Dispersion stability of graphene nanoplatelets (GNPs) and noncovalent-functionalization of GNPs with chitosan in ethanol. Applied Mechanics and Materials, 761. pp. 447-451. ISSN 1660-9336 (In Press)

Yahaya, Muhamad Amerul Mukmin (2017) Electrodepostion Of Nickel Fly Ash (Ni-FA) Composite Coating On Aluminium Alloy 7075 Substrate From Non-Aqueous Media : Study Effect Of Current Density. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yap, , Wan Loong (2013) Design Development Of Load Carrier Type AGV. Project Report. UTeM, Melaka. (Submitted)

Yap, Yeok Ven (2017) Reveal Hidden Waste Through Maynard Operation Sequence Technique (MOST) - A Case Study. Technical Report. UTeM, Melaka. (Submitted)

Yasarudin, Yayah (2014) Sustainability of zero contamination defects incoming quality inspection : a case study of automated optical visual inspection. Masters thesis, UTeM.

Yatim, Norazlina Mohamad and Shaaban, Azizah and Dimin, Mohd Fairuz and Yusof, Faridah (2015) Statistical evaluation of the production of urea fertilizer-multiwalled carbon nanotubes using Plackett Burman experimental design. Procedia - Social and Behavioral Sciences , 195. 315 - 323. ISSN 195 ( 2015 ) 315 – 323

Yee, Sze Ling (2017) Investigation On Mechanical Properties Of Additive Manufacturing Bone Scaffold. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yoong, Sai Sieng (2016) Process Parameter Relationship Of Stainless Steel To Carbon Steel Pipes Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yoxall, Alaster and Kamat, Seri Rahayu and Langley, Joe (2009) Squeezability. Part 2: getting stuff out of a bottle. In: Proc. IMechE Vol. 224 Part C: J. Mechanical Engineering Science.

Yuearajan, Santhiran (2013) Modeling And Simulation Of Drawing Process On Aluminium AA7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yuhazri, Yaakob (2008) BMFB 3273 / BMFB 4233: Komposit Dan Bahan Termaju (Composite And Advanced Materials). [Teaching Resource]

Yuk Choi, Lee (2005) BMCC 4743: Pengukuran & Instrumentasi. [Teaching Resource]

Yumasir, Mohamad Hadi (2017) Design Analysis Of Metal Forming Process For The Corrugated Metal Gasket. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusuf, Yusliza and Zulkifli, Mohd Rosli and Jariah , Mohamad Juoi and Omar, Nooririnah and Umar , Al-amani (2014) The influence of the microwave plasma nitrided Ti6Al4V substrate properties to the duplex coating performance. Applied Mechanics And Materials (doi:10.4028/www.scientific.net/AMM.761.68). pp. 68-72. ISSN 1660-9336

Yusup, Mohd Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Mohamed, Norhafiza (2013) THE TRANSLATIONAL PROCESS OF CLEANER PRODUCTION STRATEGIES. GLOBAL ENGINEERS & TECHNOLOGISTS REVIEW, 3 (5). pp. 29-39. ISSN 2231-9700

Yusup, Mohd Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Mohd Rosdi, Mohd Noor Hanif (2013) THE TRIGGER SIGNAL FOR LEAN PRODUCTION PRACTICES : A REVIEW. GLOBAL ENGINEERS & TECHNOLOGISTS REVIEW, 3 (6). pp. 23-32. ISSN 2231-9700

Yusup, Mohd Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal (2015) Review the influence of lean tools and its performance against the index of manufacturing sustainability. Int. J. Agile Systems and Management, 8 (2). pp. 116-131. ISSN 1741-9182

Yusup, Muhamad Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Muhamad, Mohd Razali and Saptari, Adi (2015) Synthesizing The Domain Of Lean Practices In Manufacturing Operations : A Review. Jurnal Teknologi , 77 (1). pp. 153-162. ISSN 2180-3722

Yusup, Muhamad Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Muhamad, Mohd Razali and Saptari, Adi (2015) Synthesizing The Domain Of Lean Practices In Manufacturing Operations : A Review. Jurnal Teknologi , 77 (1). pp. 153-162. ISSN 2180-3722

Yusup, Muhamad Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Mohd Yusof, Azrul Shahimy (2015) Review The Influence Of Lean Tools And Its Performance Against The Index Of Manufacturing Sustainability. International Journal Of Agile Systems And Management, 8. pp. 116-131. ISSN -

Z

Zahlizamrina, Ramli (2011) Inventory Storage With Barcode (ISwB). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zahlizamrina , Ramli (2011) Inventory Storage With Barcode (ISWB). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zahra , Hosseini and Hamed , Fazlollahtabar and Iraj , Mahdavi and Minhat, Mohamad (2013) A Mathematical Model for Waste Management in Reverse Supply Chain. In: Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management, January 7 – 9, 2014, Bali, Indonesia. (Submitted)

Zaid , Mohd Sa'at (2014) Performance analysis of industrial robots in handling hard disk drive. Masters thesis, UTeM.

Zaimi , Sahak (2006) Design And Fabrication Of Pressure Limiting Valve For Automobile Tube-Tubeless. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Zainal Abidin , N.F and Salleh, M.S. and Minhat, M and Arep, H (2011) STEP-NC Controller ̶ Testing and Commissioning for Open Architecture Control System. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Zainal Kifli, Muhammad Syahmi (2017) Investigation On The Suitability Of Plastic Bottle Material As 3D Printer Filament. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainila, Salam (2013) Design and simulation of proposed automation system in existing manufacturing work environment. Masters thesis, UTeM.

Zainudin, Robiatul Aqirah (2017) Development Of Casing And Ventilation System In 3D Printer, Prusa 13 By Using Integrated Approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainul Abidin, Siti Nursyafiqa (2017) Development Of Simulator Training Centre For The Manufacturing Of Automative Seating. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zakaria, Fazlinizam (2016) Design Of Ultimate Shield For Impact Resistant Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Nurul Farmira (2016) Design A Low Cost Table Fan Using DFMA Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Nurul Nadiah (2015) The Evaluation Of Production Line Performance By Using ARENA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zaleha, Mustafa (2006) BMFB 3213: Teknologi Plastik. [Teaching Resource]

Zaleha, Mustafa (2006) BMFB 3213: Teknologi Plastik. [Teaching Resource]

Zaleha, Mustafa (2006) BMFB 3223: Metalurgi Mekanikal. [Teaching Resource]

Zaleha, Mustafa (2007) BMFB 3233: Bahan Polimer (Polymer Materials). [Teaching Resource]

Zamberi, Jamaludin (2003) BMFA 2423: Instrumentasi & Kawalan. [Teaching Resource]

Zamberi, Jamaludin (2009) BMFA 3453 / BMFA 3423: Sistem Kawalan Termaju (Advanced Control System). [Teaching Resource]

Zamberi, Jamaludin (2010) BMFA 3453: Sistem Kawalan (Advanced Control System). [Teaching Resource]

Zamberi, Jamaludin (2009) BMFA 3453: Sistem Kawalan Termaju (Advanced Control System). [Teaching Resource]

Zamberi, Jamaludin (2010) BMFP 2423: Kawalan & Instrumentasi (Instrumentation & Control). [Teaching Resource]

Zamberi, Jamaludin (2010) MMFS5043: Robotics And Automation. [Teaching Resource]

Zamberi, Jamaludin (2010) MMFS5043: Robotik Dan Automasi (Robotics And Automation). [Teaching Resource]

Zamberi, Jamaludin (2009) Sistem Kecerdikan Buatan (ArtificiaL Intelligent System). [Teaching Resource]

Zamri, Ruzaidi (2008) BMFG 4812: Jurutera Dalam Masyarakat (Engineer In Society). [Teaching Resource]

Zamuri, Amiza Aliyana (2017) Reducing Rejection On Nickel Free Plating At Finishing Line In Metal Manufacturing Company By Using Kaizen Approach. Project Report. UTeM, Melaka. (Submitted)

Zaren Mukrish , Zainal Ariffin (2010) Production Losses Analysis Of An Automotive Component Using General Linear Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zenoraiman, Mustapha (2006) A Study of Surface Integrity Whilst Turning AISI 1045 Steel With TIC/WC Coated Insert. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zhafran Aizat , Zakaria (2007) Productivity Improvement By Using Line Balancing Technique Case Study At An Electronic Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zharif Anwar, Sulaiman (2011) Analyzing Transformer Manufacturing Failure By Using FMEA Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zolkarnain, Marjom (2009) BMFR 4143: Rekabentuk Untuk Pembuatan Dan Pemasaran (Engineering Material). [Teaching Resource]

Zolkarnain, Marjom (2008) DMFD 2823: Statik & Dinamik (Statics & Dynamics). [Teaching Resource]

Zolkarnain, Marjom and Shariman, Abdullah (2003) BMFG 2823: Mekanik Gunaan. [Teaching Resource]

Zolkepli, Buang (2010) BMFB 2213: Bahan Kejuruteraan (Engineering Materials). [Teaching Resource]

Zolkepli, Buang (2009) DMFD 3253: Bahan Kejuruteraan (Engineering Material). [Teaching Resource]

Zuhriah, Ebrahim (2004) Integrating Lean Management And Quality Management: The Critical Links And A Contingency Model. Masters thesis, Coventry University.

Zuhriah, Ebrahim (2004) BMFP 3453: Metrology Engineering. [Teaching Resource]

Zuhriah, Ebrahim (2004) BMFP 3543: Engineering Metrology. [Teaching Resource]

Zuhriah, Ebrahim (2005) BMFP 3543: Engineering Metrology. [Teaching Resource]

Zuhriah , Ebrahim (2005) BMFP 4573: Industrial Laws And O.S.H.A. [Teaching Resource]

ZulFadli , Zailan and Seri Rahayu , Kamat and Muhamad Arfauz, A Rahman and Norhidayah, Hashim (2014) Design of an ergonomic acquisition and monitoring framework in assembly task. In: International Conferance in Concurrent and Design Engineering (iDECON 2014), 20 and 21 September 2014, Melaka.

Zulkafli, Norizzati (2017) Measurement Of Residual Stress In Cold Work Austenitic Stainless Steel 316L With Deflection Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkeflee, Abdullah (2003) Analysis And Improvement of the Product and Process Design Using DFA House Methodology. Masters thesis, Universiti Teknologi Malaysia.

Zulkeflee, Abdullah (2007) BMFG 4812: Jurutera Dalam Masyarakat (Engineers In Society). [Teaching Resource]

Zulkeflee, Abdullah and Nurazua, Mohd Yusop (2004) BMFS 3343: Production Tooling. [Teaching Resource]

Zulkiffli Fahmi , Ambia (2013) A Study Of AGV Drive Mechanism. Project Report. UTeM, Melaka. (Submitted)

Zulkiflee, Mad Atari (2005) Development Of Postprocessor For Milling Machine HAAS Vop-C. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkifli, Mohd Rodzi (2016) Study Of Thermal Effect On Ester Oil Dielectric Stress Using Breakdown Measurements And Total Acid Number (TAN) Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkifli, Mohd Rosli (2009) BMFB 4263: Pemilihan Bahan (Materials Selection). [Teaching Resource]

Zulkifli, Mohd Rosli (2010) BMFB 4263: Pemilihan Bahan (Materials Selection). [Teaching Resource]

Zulkifli, Mohd Rosli (2010) BMFB 4283: Analisa Kegagalan Bahan & NDT (Failure Analysis & NDT). [Teaching Resource]

Zulkifli, Mohd Rosli (2009) DMFD 3253: Bahan Kejuruteraan (Materials Engineering). [Teaching Resource]

Zuriah , Zakaria (2007) Pencengkam Robot Berbentuk Silinder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zurina, Shamsudin (2006) BMFB 3233: Bahan Polimer. [Teaching Resource]

Zurina, Shamsudin (2008) BMFB 3243: Kejuruteraan Polimer (Polymer Engineering). [Teaching Resource]

This list was generated on Tue Mar 26 13:34:39 2019 MYT.