SCAPS numerical analysis of solid-state dye-sensitized solar cell utilizing copper (I) iodide as hole transport layer

Arith, Faiz and Noorasid, Nur Syamimi and Firhat, Ain Yasmin and Mustafa, Ahmad Nizamuddin and Mohd Shah, Ahmad Syahiman (2022) SCAPS numerical analysis of solid-state dye-sensitized solar cell utilizing copper (I) iodide as hole transport layer. Engineering Journal, 26 (2). 01-10. ISSN 0125-8281

Text ej/article/download/4414/4414-Article Text-20766-2-10-20220302.pdf Download (934kB)

Abstract

Here, numerical study of solid-state dye-sensitized solar cell (SSDSSC) with Copper (I) Iodide as a hole transport layer was investigated using SCAPS-1D simulation software. The complete simulated device structures in this project are composed of FTO/TiO2/N719/CuI/Ni. Several key parameters of HTL such as layer thickness, doping concentration, working temperature, and interface defect have been analysed to obtain the highest efficiency for SSDSSC as well as the influence of back contact. The incorporation with various ETLs such as TiO2, ZnO, and SnO2 were also studied. The results show that SSDSSC with back contact yields a better performance due to low HTL thickness compared to without back contact. In addition, it can also be proved that TiO2 as ETL obtained the best efficiency up to 5.6%. Further investigation also found that combining optimized CuI and TiO2 parameters with a perovskite layer would increase cell efficiency to nearly 30%, higher than previously reported devices. The proposed parameter structure may trigger the temptation for the use of CuI as HTL in solar cell application.

Item Type:	Article
Uncontrolled Keywords:	CuI, Hole transport layer, SCAPS-1D, SSDSSC, Perovskite solar cell.
Divisions:	Faculty of Electronics and Computer Engineering
Depositing User:	mr eiisaa ahyead
Date Deposited:	24 Mar 2023 11:36
Last Modified:	24 Mar 2023 11:36
URI:	http://eprints.utem.edu.my/id/eprint/26676
Statistic Details:	View Download Statistic

Actions (login required)

View Item