XRD ANALYSIS OF Cu-Al INTERCONNECT INTERMETALLIC COMPOUND IN AN ANNEALED MICRO-CHIP

T., Joseph Sahaya Anand and Kok, Yau Chua (2012) XRD ANALYSIS OF Cu-Al INTERCONNECT INTERMETALLIC COMPOUND IN AN ANNEALED MICRO-CHIP. Advanced Materials Research, 620. pp. 166-172. ISSN 1022 - 6680

WarningThere is a more recent version of this item available.
[img] PDF (Scopus Indexed Journal)
24_AMR_620.pdf - Published Version
Restricted to Registered users only until 2 December 2014.
Download (672kB) | Request a copy

Abstract

Cu-Al intermetallic compound (IMC) in Cu wire-Al bond pad interconnect interface is drawing attention of researches. However, due to thin IMC thickness, the characterizations of the IMC are limited to expensive and time consuming techniques. An evaluation is performed to use common X-Ray Diffraction (XRD) technique to identify the IMC in the Cu wired micro-chip samples in powder form. Existence of mixture of CuAl and CuAl2 was first confirmed by transmission electron microscope (TEM) and energy dispersive X-ray (EDX). In XRD analysis, peak correspond to CuAl phase is identified from measurement with slower scan configuration. The difficulty for IMC peak detection in diffractogram is due to low composition ratio of IMC relative to other materials available in the sample. KOH treatment for enhancing IMC peaks intensity does not work as expected as it etches the IMC as well.

Item Type: Article
Uncontrolled Keywords: Intermetallic compound, X-ray diffraction, micro-chip, wire-bonding
Subjects: T Technology > TJ Mechanical engineering and machinery
Divisions: Faculty of Manufacturing Engineering > Department of Engineering Materials
Depositing User: Dr. T. Joseph Sahaya Anand
Date Deposited: 26 Mar 2013 04:32
Last Modified: 28 May 2015 03:46
URI: http://eprints.utem.edu.my/id/eprint/6951
Statistic Details: View Download Statistic

Available Versions of this Item

Actions (login required)

View Item View Item