Items where Author is "A. P., Puvanasvaran"

Article

A. P., Puvanasvaran and Jamibollah, N and N., Norazlin (2014) INTEGRATION OF POKA YOKE INTO PROCESS FAILURE MODE AND EFFECT ANALYSIS: A CASE STUDY. American Journal of Applied Sciences, 11 (8). pp. 1332-1342. ISSN 1546-9239

A. P., Puvanasvaran and V. A. , Alagendran and N., Norazlin (2014) Developing Lean – EMS Integration Database for Sustaining ISO 14000 Certification. Manufacturing Science and Technology 2(2): 34-44, 2014, 2 (2). pp. 34-44. ISSN DOI: 10.13189/mst.2014.020202

A. P., Puvanasvaran and Y., Hui Hui and N., Norazlin (2014) MANAGING WASTE ELIMINATION DATABASE IN LEAN MANUFACTURING: IMPROVE PROBLEM SOLVING CAPABILITY. American Journal of Engineering and Applied Sciences, 7 (2). pp. 271-281. ISSN 1941-7020

A. P., Puvanasvaran (2013) WORKSHOP STORE ROOM IMPROVEMENT WITH 5S: A CASE STUDY. Advanced Manufacturing Technology, 7 (1). pp. 45-62. ISSN 1985-3157

A. P., Puvanasvaran (2013) CONSIDERATION OF DEMAND RATE IN OVERALL EQUIPMENT EFFECTIVENESS (OEE) ON EQUIPMENT WITH CONSTANT PROCESS TIME. Journal of industrial engineering and management, 6 (2). pp. 507-525. ISSN 2013-0953

A. P., Puvanasvaran (2013) ORGANIZATIONAL VERTICAL AND VIRTUAL INTEGRATION MODEL IN IMPLEMENTING LEAN MANUFACTURING TRANSFORMATION. PROCEEDINGS OF INTERNATIONAL CONFERENCE ON TECHNOLOGY MANAGEMENT AND TECHNOPRENEURSHIP (IC-TMT) 2012 PARTICIPATION, 1 (1). pp. 85-99. ISSN IC-TMT-2012

A. P., Puvanasvaran and T.S.N., Stephanie and N., Norazlin (2013) Study On Streamlined Process Improvement By Using Value Stream Mapping In Automotive Seating Company: A Case Study. Journal of Advanced Manufacturing Technology (JAMT) , 07 (2). pp. 57-67. ISSN 1985-3157

R., Thevendran and A. P. , Puvanasvaran (2012) Industrializing the University-SME Commercialization: A Conceptual Study of Commercialization Industry in Malaysia. PROCEEDINGS OF INTERNATIONAL CONFERENCE ON TECHNOLOGY MANAGEMENT AND TECHNOPRENEURSHIP (IC-TMT) 2012, 1 (1). pp. 100-107. ISSN IC-TMT 2012

A. P., Puvanasvaran (2012) University-SME clusters: A research on commercialization perspective among IPTA & IPTS in Malaysia. PROCEEDINGS OF INTERNATIONAL CONFERENCE ON TECHNOLOGY MANAGEMENT AND TECHNOPRENEURSHIP (IC-TMT) 2012, 1 (1). pp. 10-20. ISSN IC-TMT 2012

A. P. , Puvanasvaran (2012) Employability Skills Assessment Tool Development. International Education Studies, 5 (5). pp. 43-56. ISSN 1913-9039

A. P., Puvanasvaran and M. R. , Muhamad (2012) Integration Model of ISO 14001 with Lean Principles. American Journal of Applied Sciences, 9 (12). pp. 1974-1978. ISSN 1546-9239

A. P., Puvanasvaran (2012) Interrelationship Between Availability With Planning Factor and Mean Time Between Failures (MTBF) in Overall Equipment Effectiveness (OEE). Journal of Advanced Manufacturing Technology (JAMT) , 6 (2). pp. 29-38. ISSN 1985-3157

A. P., Puvanasvaran and M. R., Muhamad (2012) Lean principles adoption in environmental management system (EMS): A survey on ISO 14001 certified companies in Malaysia. Journal of Industrial Engineering and Management, 5 (2). pp. 406-430. ISSN 2013-8423

M.Y, YUHAZRI and P.T, Phongsakorn and I.P, Haeryip Sihombing and A.R., Jeefferie and A. P., Puvanasvaran and A.M, Kamarul and Rassiah, Kannan (2011) Mechanical Properties of Kenaf/Polyester Composites. International Journal of Engineering & Technology, 11 (1). pp. 127-131. ISSN 2077-1185

A. P., Puvanasvaran and Sulaiman, Hisham and Sued, Kamil (2011) Investigation on the Mechanical Characteristics of Sawdust and Chipwood Filled Epoxy. Journal of Mechanical Engineering and Technology, 3 (1). pp. 71-78. ISSN 2180-1053

A. P., Puvanasvaran (2011) People Development System as a Pillar in Implementing Lean For Public Sector. Journal of Human Capital Development, 3 (1). pp. 1-23. ISSN 1985-7012

A. P., Puvanasvaran (2011) People Development System as a Pillar in Implementing Lean for Public Sector. Journal of Human Capital Development, 43 (1). pp. 1-23. ISSN 1985-7012

A. P., Puvanasvaran and Kerk, Swee Tian and Muhammad, Mohd Razali (2011) Principles and Business Improvement Initiatives of Lean Relates to Environmental Management System. Proceeding IEEE International Technology Management Conference 2011, 2 (11). pp. 439-444. ISSN 978-1-61284-952

A. P., Puvanasvaran and Kerk, Swee Tian and Muhammad, Mohd Razali (2011) Sustainability Of ISO 14001 Standards Through An Integration With Lean Principles. American Journal of Applied Sciences, 8 (11). pp. 1182-1194. ISSN 1546-9239

A. P., Puvanasvaran and M. R., Muhamad (2011) Sustainability of International Standards Organisation 14001 Standards through Integration with Lean Principles. American Journal of Applied Sciences, 8 (11). pp. 1182-1194. ISSN 1546-9239

A. P., Puvanasvaran and M. R., Muhamad and S.T. Kerk, Robert (2010) A Review of Purpose, Benefits, Impediments and Structure of Environmental Management System (EMS). Australian Journal of Basic and Applied Sciences, 4 (10). pp. 4710-4716. ISSN 1991-8178

M. S., Kamil and A. M., Kamely and H. Y., Saifudin and A. P., Puvanasvaran and M.M.P., Dan (2010) The Source of Uncertainty in 3D Laser Scanner. Journal of Advanced Manufacturing and Technology, 4 (1). pp. 87-96. ISSN 1985-3157

A. P., Puvanasvaran (2009) Importance of Employability Skills as Perceived by Employers of Malaysian Manufacturing Industry. Journal of Human Capital Development, 2 (2). pp. 23-35. ISSN 1985-7012

A. P. , Puvanasvaran and M. R., Muhamad (2009) Lean Behavior in Implementing Lean Process Management. Journal of Applied Sciences Research, 5 (8). pp. 930-943.

A. P., Puvanasvaran and M. R. , Muhamad (2009) Leanness Achievement through People Development System in Implementing Lean Process Management. American J. of Engineering and Applied Sciences, 2 (1). pp. 105-119. ISSN 1941-7020

A. P., Puvanasvaran and M.R, Muhamad (2008) A Review of Problem Solving Capabilities in Lean Process Management. American Journal of Applied Science, 5 (5). pp. 504-511. ISSN 1546-9239

Book Chapter

A. P., Puvanasvaran (2012) Enhancing Productivity Through Lean Behavior. In: Theoretical and Methodological Approaches to Social Sciences and Knowledge Management. INTECH, pp. 283-306. ISBN 978-953-51-0687-6

Conference or Workshop Item

A. P., Puvanasvaran (2012) Evolution Sustainable Innovation Management in China. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

A. P., Puvanasvaran (2012) Overall Equipment Efficiency (Oee) Improvement Through Integrating Quality Tool: Case Study. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

A. P., Puvanasvaran (2012) A Study on the Effect of Different Interconnection Materials (Wire and Bond Pad) on Ball Bond Strength after Temperature Cycle Stress. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

A. P., Puvanasvaran (2012) Sustainability of Green Technology in Malaysia Industry. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15-16 October 2012, Universiti Teknikal Malaysia Melaka (UTeM).

A. P., Puvanasvaran (2012) Workshop Store Room Improvement With 5s: A Case Study. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

A. P., Puvanasvaran and M. R. , Muhamad (2011) Principles and Business Improvement Initiatives of Lean Relates to Environmental Management System. In: IEEE Int'l Technology Management Conference.

A. P., Puvanasvaran and S.T. Kerk, Robert and A. R., Ismail (2010) A CASE STUDY OF KAIZEN IMPLEMENTATION IN SMI. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010, Faculty of Mechanical Engineering, UMP Pekan, Kuantan, Pahang, Malaysia.

A. R. , Ismail and N. , Jusoh and A. P. , Puvanasvaran and M. S. , Reza (2010) A CASE STUDY OF OCCUPANT ENVIRONMENTAL COMFORT AT AUTOMOTIVE ASSEMBLYWORKSTATION. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010, Faculty of Mechanical Engineering, UMP Pekan, Kuantan, Pahang, Malaysia.

A. P., Puvanasvaran and A. R. , Ismail and N., Jusoh and A. Z. , Ismail and M. H. , Abu Bakar and W. H. W. , Deraman (2010) ERGONOMICS ASSESSMENT OF WORKSTATION DESIGN IN AUTOMOTIVE INDUSTRY. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010, Faculty of Mechanical Engineering, UMP Pekan, Kuantan, Pahang, Malaysia.

N. K., Makhtar and A. R. , Ismail and N. , Jusoh and A. P. , Puvanasvaran (2010) THERMAL COMFORT IN TECHNICAL SCHOOL: PHYSICAL MEASUREMENT APPROACH. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010, Faculty of Mechanical Engineering, UMP Pekan, Kuantan, Pahang, Malaysia.

A. P., Puvanasvaran and S.T.Kerk, Robert and A. R. , Ismail (2010) WORK STUDY IMPROVEMENT FOR CUERVO (ANALOG) PRODUCT IN AN ELECTRONIC INDUSTRY. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010, Faculty of Mechanical Engineering, UMP Pekan, Kuantan, Pahang, Malaysia.

Book

A. P., Puvanasvaran (2014) Lean Manufacturing: Tools & Techniques. UTeM.