Items where Author is "Abdollah, Mohd Fadzli"

Article

Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Mohamad Norani, Mohamad Nordin (2022) Lubricity and mechanical stability of bio-grease formulated from non-edible vegetable oil. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. pp. 1-21. ISSN 1350-6501

Liew, Pay Jun and Yap, Ching Yee and Othman, Intan Sharhida and Abdollah, Mohd Fadzli and Yan, Jiwang (2021) Tribological Characteristics Of Electrical Discharge Coated Layers Using Quarry Dust Suspension. Surface and Coatings Technology, 428. pp. 1-9. ISSN 0257-8972

Ismail, Rainah and Abdollah, Mohd Fadzli and Azmi, Muhamad Syafwan (2021) Lattice Structure Design Parameters Optimization For The Structural Integrity Of Passive Vibration Isolator. Manufacturing Technology, 21 (6). pp. 736-748. ISSN 1213-2489

Alkahari, Mohd Rizal and Abdollah, Mohd Fadzli and Ramli, Faiz Redza and Rosli, Nor Ana and Maidin, Shajahan and Herawan, Safarudin Gazali (2021) Review On Effect Of Heat Input For Wire Arc Additive Manufacturing Process. Journal of Materials Research and Technology, 11. pp. 2127-2145. ISSN 2238-7854

Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Nordin, Mohamad Jabbar (2021) Effect Of Fibre Length And Composition On The Tribological Attributes Of Oil Palm Fibre Polymeric Composite: Organic Brake Friction Material. Industrial Lubrication and Tribology, 73 (4). pp. 614-620. ISSN 0036-8792

Amiruddin, Hilmi and Abdollah, Mohd Fadzli and Azmi, Muhammad Alif and Mat Tahir, Noor Ayuma (2021) Lubrication Mechanisms Of Hexagonal Boron Nitride Nano-Additives Water-Based Lubricant For Steel-Steel Contact. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 235 (5). pp. 1038-1046. ISSN 1350-6501

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli and Tamaldin, Noreffendy and Amiruddin, Hilmi and Ramli, Faiz Redza and Mohamad Norani, Mohamad Nordin (2021) Mechanical And Tribological Properties Of FFF 3D-Printed Polymers: A Brief Review. Jurnal Tribologi, 29. pp. 11-30. ISSN 2289-7232

Mohamad Norani, Mohamad Nordin and Abdollah, Mohd Fadzli and Abdullah, Muhammad Ilman Hakimi Chua and Amiruddin, Hilmi and Ramli, Faiz Redza and Tamaldin, Noreffendy (2020) Correlation Of Tribo-Mechanical Properties Of Internal Geometry Structures Of Fused Filament Fabrication 3D-Printed Acrylonitrile Butadiene Styrene. Industrial Lubrication and Tribology, 72 (10). pp. 1259-1265. ISSN 0036-8792

Rosli, Nor Ana and Abdollah, Mohd Fadzli and Alkahari, Mohd Rizal and Ramli, Faiz Redza (2020) Influence Of Process Parameter On The Height Deviation Of Weld Bead In Wire Arc Additive Manufacturing. International Journal of Mechanical and Production Engineering Research and Development, 10 (3). pp. 1165-1176. ISSN 2249–6890

Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Ramli, Faiz Redza and Tamaldin, Noreffendy and Mohamad Norani, Mohamad Nordin and Abdullah, Muhammad Ilman Hakimi Chua (2020) 3D Printing Parameters Of Acrylonitrile Butadiene Styrene Polymer For Friction And Wear Analysis Using Response Surface Methodology. Proceedings Of The Institution Of Mechanical Engineers, Part J: Journal Of Engineering Tribology, 235 (2). pp. 468-477. ISSN 1350-6501

Yusuf, Yusliza and Ghazali, Mariyam Jameelah and Abdollah, Mohd Fadzli and Otsuka, Yuichi and Ohnuma, Kiyoshi and Nakamura, Susumu and Morakul, Sarita (2020) Antibacterial Properties Of Laser Surface-Textured TiO2/ZnO Ceramic Coatings. Ceramics International, 46 (3). pp. 3949-3959. ISSN 0272-8842

Abdollah, Mohd Fadzli and Mat Tahir, Noor Ayuma and Tamaldin, Noreffendy and Mohamad Zin, Mohd Rody and Amiruddin, Hilmi (2020) Optimisation Of Graphene Grown From Solid Waste Using CVD Method. International Journal of Advanced Manufacturing Technology, 106 (1-2). pp. 211-218. ISSN 0268-3768

Abdollah, Mohd Fadzli and Mahmud, Dayang Nor Fatin and Masripan, Nor Azmmi and Tamaldin, Noreffendy and Amiruddin, Hilmi (2019) Influence Of Contact Pressure And Sliding Speed Dependence On The Tribological Characteristics Of An Activated Carbon Epoxy Composite Derived From Palm Kernel Under Dry Sliding Conditions. Friction, 7 (3). pp. 227-236. ISSN 2223-7690

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli and Tamaldin, Noreffendy and Amiruddin, Hilmi and Mohamad Zin, Mohd Rody and Tokoroyama, Takayuki and Umehara, Noritsugu (2019) The Tribological Potential Of Graphene Growth From Solid Waste. Progress in Industrial Ecology, 13 (4). pp. 401-413. ISSN 1476-8917

Mohmad, Martini and Abdollah, Mohd Fadzli and Tamaldin, Noreffendy and Amiruddin, Hilmi (2017) The Effect Of Dimple Size On The Tribological Performances Of A Laser Surface Textured Palm Kernel Activated Carbon-Epoxy Composite. Industrial Lubrication And Tribology, 69 (5). pp. 768-774. ISSN 0036-8792

Shuhimi, Fairuz Fazillah and Abdollah, Mohd Fadzli and Kalam, M.A. and Masjuki, Hassan and Mustafa, Ashafi’e and Mat Kamal, Sushella Edayu and Amiruddin, Hilmi (2017) Effect Of Operating Parameters And Chemical Treatment On The Tribological Performance Of Natural Fiber Composites : A Review. Particulate Science And Technology, 35 (5). pp. 512-524. ISSN 0272-6351

Amiruddin, Hilmi and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Mansor, Mohd Radzi and Abdollah, Mohd Fadzli (2017) Experimental Investigation Of Performance And Emissions Of A Stratified Charge CNG Direct Injection Engine With Turbocharger. MATEC Web Of Conferences, 124 (07004). pp. 1-5. ISSN 2261-236X

Mahmud, Dayang Nor Fatin and Abdollah, Mohd Fadzli and Masripan, Nor Azmmi and Tamaldin, Noreffendy and Amiruddin, Hilmi (2017) Frictional Wear Stability Mechanisms Of An Activated Carbon Composite Derived From Palm Kernel By Phase Transformation Study. Industrial Lubrication And Tribology, 69 (6). pp. 945-951. ISSN 0036-8792

Mustafa, Ashafi'e and Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Shuhimi, Fairuz Fazillah and Muhammad, Noryani (2017) Optimization Of Friction Properties Of Kenaf Polymer Composite As An Alternative Friction Material. Industrial Lubrication And Tribology, 69 (2). pp. 259-266. ISSN 0036-8792

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli and Hasan, Rafidah and Amiruddin, Hilmi and Abdullah, Muhammad Ilman Hakimi Chua (2017) Statistical Models For Predicting Wear And Friction Coefficient Of Palm Kernel Activated Carbon-Epoxy Composite Using The ANOVA. Industrial Lubrication And Tribology, 69 (5). pp. 761-767. ISSN 0036-8792

Lee, Shing Chuan and Tamaldin, Noreffendy and Abdollah, Mohd Fadzli (2017) Tribological Performance Of Low Blend Decanter Cake Biodiesel. Industrial Lubrication And Tribology, 69 (3). pp. 425-432. ISSN 0036-8792

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Tamaldin, Noreffendy and Mat Nuri, Nur Rashid (2016) The Potential Of hBN Nanoparticles As Friction Modifier And Antiwear Additive In Engine Oil. Mechanics & Industry, 17 (1). pp. 1-6. ISSN 2257-7777

Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Chua, Khai Wei and Mat Tahir, Noor Ayuma (2014) Potential of palm kernel activated carbon epoxy (PKAC-E) composite as solid lubricant: effect of load on friction and wear properties. Jurnal Tribologi, 2. pp. 31-38. ISSN 2289-7232

Abdollah, Mohd Fadzli and Mazlan, Mohd Afiq Azfar and Amiruddin, Hilmi and Tamaldin, Noreffendy (2014) Experimental Study on Friction and Wear Behaviors of Ball Bearings under Gas Lubricated Conditions. Jurnal Teknologi , 66 (3). pp. 43-49. ISSN 2180-3722

Mohamad, Noraiham and Zainol, Nur Sharafina and Rahim, Faisal Faris and Ab Maulod, Hairul Effendy and Abd Rahim, Toibah and Shamsuri, Siti Rahmah and Mohd Abid, Mohd Asyadi Azam and Yaakub, Mohd Yuhazri and Abdollah, Mohd Fadzli and Abd Manaf, Mohd Edeerozey (2013) Mechanical and morphological properties of polypropylene/epoxidized natural rubber blends at various mixing ratio. Procedia Engineering . pp. 1-6. ISSN 1877-7058 (Unpublished)

Conference or Workshop Item

Rosley, Mohammad Nazry and Tamaldin, Noreffendy and Abdollah, Mohd Fadzli and Zakaria, Muhammad Zulfattah and Mat Yamin, Ahmad Kamal (2016) Emission Characteristics of Hydrogen Enrichment in Light Duty Single Cylinder Diesel Engine. In: The 4th International Conference on Engineering and ICT (ICEI 2016), 4 April 2016 - 6 April 2016, Hatten Hotel Melaka. (Submitted)

Book

Shamsudin, Shamsul Anuar and Abd Samad, Md Fahmi and Abdollah, Mohd Fadzli and Abdullah, Mohd Azman (2023) Mechanics of machines. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792772

Technical Report

Ab Maulod, Hairul Effendy and Mohamad, Noraiham and Shamsuri, Siti Rahmah and Ahsan, Qumrul and Mohd Abid, Mohd Asyadi ‘Azam and Zainal Abidin, Muhammad Zaimi and Abdollah, Mohd Fadzli (2018) Tribological Behaviour Of GreenCarbon Fibre Waste Reinforced Thermoplastic Composites Prepared Via Melt Mixing. [Technical Report] (Submitted)