Items where Author is "Amiruddin, Hilmi"
 | Up a level |
Abdollah, Mohd Fadzli bin and KAZIM, MUHAMMAD NUR AKMAL and Amiruddin, Hilmi and Ramli, Faiz Redza (2022) Surface quality and absorption properties of Polymeric Composite (PLA-PCU) fabricated using 3D printing for articular cartilage application. JURNAL TRIBOLOGI, 35. pp. 167-185. ISSN 2289-7232
Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Mohamad Norani, Mohamad Nordin (2022) Lubricity and mechanical stability of bio-grease formulated from non-edible vegetable oil. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. pp. 1-21. ISSN 1350-6501
Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Nordin, Mohamad Jabbar (2021) Effect Of Fibre Length And Composition On The Tribological Attributes Of Oil Palm Fibre Polymeric Composite: Organic Brake Friction Material. Industrial Lubrication and Tribology, 73 (4). pp. 614-620. ISSN 0036-8792
Amiruddin, Hilmi and Abdollah, Mohd Fadzli and Azmi, Muhammad Alif and Mat Tahir, Noor Ayuma (2021) Lubrication Mechanisms Of Hexagonal Boron Nitride Nano-Additives Water-Based Lubricant For Steel-Steel Contact. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 235 (5). pp. 1038-1046. ISSN 1350-6501
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli and Tamaldin, Noreffendy and Amiruddin, Hilmi and Ramli, Faiz Redza and Mohamad Norani, Mohamad Nordin (2021) Mechanical And Tribological Properties Of FFF 3D-Printed Polymers: A Brief Review. Jurnal Tribologi, 29. pp. 11-30. ISSN 2289-7232
Abdullah, Muhammad Ilman Hakimi Chua and Mohamad Norani, Mohamad Nordin and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Ramli, Faiz Redza and Tamaldin, Noreffendy (2020) Tribological Analysis Of A 3D-Printed Internal Triangular Flip ABS Pin During Running-In Stage. Jurnal Tribologi, 27. pp. 42-56. ISSN 2289-7232
Mohamad Norani, Mohamad Nordin and Abdollah, Mohd Fadzli and Abdullah, Muhammad Ilman Hakimi Chua and Amiruddin, Hilmi and Ramli, Faiz Redza and Tamaldin, Noreffendy (2020) Correlation Of Tribo-Mechanical Properties Of Internal Geometry Structures Of Fused Filament Fabrication 3D-Printed Acrylonitrile Butadiene Styrene. Industrial Lubrication and Tribology, 72 (10). pp. 1259-1265. ISSN 0036-8792
Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Ramli, Faiz Redza and Tamaldin, Noreffendy and Mohamad Norani, Mohamad Nordin and Abdullah, Muhammad Ilman Hakimi Chua (2020) Synergistic Effect Of Loads And Speeds On The Dry Sliding Behaviour Of Fused Filament Fabrication 3D-Printed Acrylonitrile Butadiene Styrene Pins With Different Internal Geometries. International Journal of Advanced Manufacturing Technology, 108. pp. 2525-2539. ISSN 0268-3768
Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Mohamad Nizar, Muhamad Aliff Danial (2020) Measurement Of Roller Chain Wear Lubricated With Palm Oil-Based Hexagonal Boron Nitride Nanoparticles. Industrial Lubrication And Tribology, 72 (10). pp. 1199-1204. ISSN 0036-8792
Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Ramli, Faiz Redza and Tamaldin, Noreffendy and Mohamad Norani, Mohamad Nordin and Abdullah, Muhammad Ilman Hakimi Chua (2020) 3D Printing Parameters Of Acrylonitrile Butadiene Styrene Polymer For Friction And Wear Analysis Using Response Surface Methodology. Proceedings Of The Institution Of Mechanical Engineers, Part J: Journal Of Engineering Tribology, 235 (2). pp. 468-477. ISSN 1350-6501
Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Mohamad Zin, Mohd Rody and Tamaldin, Noreffendy (2020) Effect Of Hydrogen On Graphene Growth From Solid Waste Products By Chemical Vapour Deposition: Friction Coefficient Properties. Industrial Lubrication And Tribology, 72 (2). pp. 181-188. ISSN 0036-8792
Abdollah, Mohd Fadzli and Mat Tahir, Noor Ayuma and Tamaldin, Noreffendy and Mohamad Zin, Mohd Rody and Amiruddin, Hilmi (2020) Optimisation Of Graphene Grown From Solid Waste Using CVD Method. International Journal of Advanced Manufacturing Technology, 106 (1-2). pp. 211-218. ISSN 0268-3768
Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Tamaldin, Noreffendy and Amiruddin, Hilmi and Mohamad Zin, Mohd Rody and Kamis, Shahira Liza (2020) Tribological Performance Of The Graphene Synthesized From Fruit Cover Plastic Waste And Oil Palm Fiber Using A CVD Method. Industrial Lubrication and Tribology, 72 (6). pp. 771-777. ISSN 0036-8792
Md Alias, Muhammad Aizat and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi (2019) Lubricant And Tribological Properties Of Zinc Compound In Palm Oil. Industrial Lubrication and Tribology, 71 (10). pp. 1177-1185. ISSN 0036-8792
Abdollah, Mohd Fadzli bin and Ibrahim, Maziah and Amiruddin, Hilmi (2019) Friction Reduction Of Palm Kernel Activated Carbon Polymer Composite By Lubricant Impregnation. Tribology Online, 14 (5). pp. 411-416. ISSN 1881-2198
Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Tamaldin, Noreffendy and Amiruddin, Hilmi and Mohamad Zin, Mohd Rody (2019) Graphene Coatings Technology On Tribology Perspective. International Journal of Recent Technology and Engineering (IJRTE), 8 (1S5). pp. 33-37. ISSN 2277-3878
Abdollah, Mohd Fadzli and Mahmud, Dayang Nor Fatin and Masripan, Nor Azmmi and Tamaldin, Noreffendy and Amiruddin, Hilmi (2019) Influence Of Contact Pressure And Sliding Speed Dependence On The Tribological Characteristics Of An Activated Carbon Epoxy Composite Derived From Palm Kernel Under Dry Sliding Conditions. Friction, 7 (3). pp. 227-236. ISSN 2223-7690
Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Norashid, Norjannahtul Ainah (2019) Comparative Study Of The Tribological Behaviour Of 3D-Printed And Moulded ABS Under Lubricated Condition. Materials Research Express, 6 (8). pp. 1-7. ISSN 2053-1591
Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli and Tamaldin, Noreffendy and Amiruddin, Hilmi and Mohamad Zin, Mohd Rody and Tokoroyama, Takayuki and Umehara, Noritsugu (2019) The Tribological Potential Of Graphene Growth From Solid Waste. Progress in Industrial Ecology, 13 (4). pp. 401-413. ISSN 1476-8917
Amiruddin, Hilmi and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Abu Mansor, Mohd Radzi and Mamat, Rizalman and Alias, Azri (2018) Investigation Of The Pressure Ratio And Efficiency Of A Turbocharger Centrifugal Compressor With A Vaned Diffuser. World Review Of Science, Technology And Sustainable Development, 14 (2-3). pp. 228-240. ISSN 1741-2242
Amiruddin, Hilmi and Abdollah, Mohd Fadzli bin and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Abu Mansor, Mohd Radzi and Mamat, Rizalman and Alias, Azri (2017) Effect of Vaned Diffuser on the Performance of Small Turbocharger. Journal of Mechanical Engineering, SI 1 (1). pp. 227-236. ISSN 1823-5514
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid and Saleman, Abdul Rafeq (2017) The hBN Nanoparticles as an Effective Engine Oil Additive to Enhance the Durability and Performance of a Small Diesel Engine. Journal of Mechanical Engineering, SI 1 (1). pp. 103-112. ISSN 1823-5514
Amiruddin, Hilmi and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Abu Mansor, Mohd Radzi and Mamat, Rizalman and Alias, Azri (2017) Application Of Taguchi Method In Optimization Of Design Parameter For Turbocharger Vaned Diffuser. Industrial Lubrication And Tribology, 69 (3). pp. 409-413. ISSN 0036-8792
Mohmad, Martini and Abdollah, Mohd Fadzli and Tamaldin, Noreffendy and Amiruddin, Hilmi (2017) The Effect Of Dimple Size On The Tribological Performances Of A Laser Surface Textured Palm Kernel Activated Carbon-Epoxy Composite. Industrial Lubrication And Tribology, 69 (5). pp. 768-774. ISSN 0036-8792
Shuhimi, Fairuz Fazillah and Abdollah, Mohd Fadzli and Kalam, M.A. and Masjuki, Hassan and Mustafa, Ashafi’e and Mat Kamal, Sushella Edayu and Amiruddin, Hilmi (2017) Effect Of Operating Parameters And Chemical Treatment On The Tribological Performance Of Natural Fiber Composites : A Review. Particulate Science And Technology, 35 (5). pp. 512-524. ISSN 0272-6351
Amiruddin, Hilmi and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Mansor, Mohd Radzi and Abdollah, Mohd Fadzli (2017) Experimental Investigation Of Performance And Emissions Of A Stratified Charge CNG Direct Injection Engine With Turbocharger. MATEC Web Of Conferences, 124 (07004). pp. 1-5. ISSN 2261-236X
Mahmud, Dayang Nor Fatin and Abdollah, Mohd Fadzli and Masripan, Nor Azmmi and Tamaldin, Noreffendy and Amiruddin, Hilmi (2017) Frictional Wear Stability Mechanisms Of An Activated Carbon Composite Derived From Palm Kernel By Phase Transformation Study. Industrial Lubrication And Tribology, 69 (6). pp. 945-951. ISSN 0036-8792
Mustafa, Ashafi'e and Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Shuhimi, Fairuz Fazillah and Muhammad, Noryani (2017) Optimization Of Friction Properties Of Kenaf Polymer Composite As An Alternative Friction Material. Industrial Lubrication And Tribology, 69 (2). pp. 259-266. ISSN 0036-8792
Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli and Hasan, Rafidah and Amiruddin, Hilmi and Abdullah, Muhammad Ilman Hakimi Chua (2017) Statistical Models For Predicting Wear And Friction Coefficient Of Palm Kernel Activated Carbon-Epoxy Composite Using The ANOVA. Industrial Lubrication And Tribology, 69 (5). pp. 761-767. ISSN 0036-8792
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2017) Tribological effects of nano-based engine oil diluted with biodiesel fuel. International Journal of Surface and Engineering, 11 (1). pp. 12-22. ISSN 1749-785X
Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi (2016) When should i change my tire? CARe Newsletter. p. 5. ISSN 2289-9871
Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2016) The effect of sliding distance at different temperatures on the tribological properties of a palm kernel activated carbon–epoxy composite. Tribology International, 94. pp. 352-359. ISSN 0301-679X
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2016) The potential of hBN nanoparticles as friction modifier and antiwear additive in engine oil. Mechanics & Industry, 17 (1). pp. 1-6. ISSN 2257-7777
Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2016) The Effect Of Sliding Distance At Different Temperatures On The Tribological Properties Of A Palm Kernel Activated Carbon-Epoxy Composite. Tribology International, 94 (-). pp. 352-359. ISSN 0301-679X
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and tamaldin, noreffendy and Amiruddin, Hilmi and Mat Nuri, Nur Rashid (2016) Effect of hexagonal boron nitride nanoparticles as an additive on the extreme pressure properties of engine oil. Industrial Lubrication And Tribology, 68 (4). pp. 441-445. ISSN 0036-8792
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Tamaldin, Noreffendy and Mat Nuri, Nur Rashid (2016) The Potential Of hBN Nanoparticles As Friction Modifier And Antiwear Additive In Engine Oil. Mechanics & Industry, 17 (1). pp. 1-6. ISSN 2257-7777
Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2015) The effect of temperature on the tribological properties of palm kernel activated carbonepoxy composite. Tribology Online, 10 (6). pp. 428-433. ISSN 1881-2198
Amiruddin, Hilmi and Abdollah, Mohd Fadzli bin and Idris, A.M. and Abdullah, Muhammad Ilman Hakimi Chua and tamaldin, Noreffendy (2015) Stability of nano-oil by pH control in stationary conditions. In: Mechanical Engineering Research Day 2015, 31 March 2015, Melaka.
Abdullah, Adli Zil Ikram and Abdollah, Mohd Fadzli bin and Tee, Boon Tuan and Amiruddin, Hilmi and Mat Yamin, Ahmad Kamal and Tamaldin, Noreffendy (2015) Thermal performance of carbon-based microencapsulated phase change materials. In: Mechanical Engineering Research Day 2015, 31 March 2015, Melaka.
Mustafa, Ashafi'e and Abdollah, Mohd Fadzli bin and Shuhimi, Fairuz Fazillah and Ismail, N. and Amiruddin, Hilmi and Umehara, Noritsugu (2015) Selection and verification of kenaf fibres as an alternative friction material using weighted decision matrix method. Materials and Design, 67. pp. 577-582. ISSN 0261-3069
Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Chua, Khai Wei and Mat Tahir, Noor Ayuma (2014) Potential of palm kernel activated carbon epoxy (PKAC-E) composite as solid lubricant: effect of load on friction and wear properties. Jurnal Tribologi, 2. pp. 31-38. ISSN 2289-7232
Amiruddin, Hilmi and Abdollah, Mohd Fadzli bin and Mazlan, Mohd Afiq Azfar and tamaldin, noreffendy (2014) Effect of Lubrication Environments on Wear Performance of Ball Bearing Materials. In: Proceedings of 41th Leeds-Lyon Symposium on Tribology 2014, 2-5 September 2014, Leeds, United Kingdom.
Abdollah, Mohd Fadzli bin and Abdullah, Muhammad Ilman Hakimi Chua and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2014) The hBN Nanoparticles as an Effective Additive in Engine Oil to Enhance the Durability and Performance of a Small Diesel Engine. In: Proceedings of 41th Leeds-Lyon Symposium on Tribology 2014, 2-5 September 2014, Leeds, United Kingdom.
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid and Hassan, Masjuki and Saleman, Abdul Rafeq (2014) Improving Engine Oil Properties by Dispersion of hBN/Al2O3 Nanoparticles. Applied Mechanics and Materials. pp. 70-73. ISSN 1660-9336
Abdollah, Mohd Fadzli bin and Abdullah, Muhammad Ilman Hakimi Chua and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2014) Drive to Greener Future: Tribological and Engine Performances of Nano-Oil. In: JAST Tribology Conference, Spring 2014, 19 - 21 May 2014, Tokyo.
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Mat Nuri, Nur Rashid and tamaldin, noreffendy and Hassan, Masjuki and Saleman, Abdul Rafeq (2014) Effect of hBN/Al2O3 nanoparticles on engine oil properties. Energy Education Science and Technology Part A: Energy Science and Research. pp. 3261-3268. ISSN 1308-772X
Ashafi'e, Mustafa and Abdollah, Mohd Fadzli bin and Ismail, Nurhidayah and Amiruddin, Hilmi and Umehara, Noritsugu (2014) Pre-Materials Selection for Eco-Aware Lightweight Friction Material. In: 9th International Materials Technology Conference and Exhibition, 13 - 16 May 2014, Kuala Lumpur.
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2014) Effect of hBN/Al2O3 Nanoparticle Additives on the Tribological Performance of Engine Oil. Jurnal Teknologi , 66 (3). pp. 1-6. ISSN 2180-3722
Abdollah, Mohd Fadzli and Mazlan, Mohd Afiq Azfar and Amiruddin, Hilmi and Tamaldin, Noreffendy (2014) Experimental Study on Friction and Wear Behaviors of Ball Bearings under Gas Lubricated Conditions. Jurnal Teknologi , 66 (3). pp. 43-49. ISSN 2180-3722
Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2014) The Effect on Friction Coefficient and Wear Rate of Palm Kernel Activated Carbon-Epoxy (PKAC-E) Composite at Different Temperatures. In: 3rd Malaysia-Japan Tribology Symposium 2014 (MJTS2014), 12-14 November 2014, Malaysia-Japan Internation Institute of Technology (MJJIT).
Mustafa, Ashafi'e and Abdollah, Mohd Fadzli bin and Ismail, Nurhidayah and Amiruddin, Hilmi and Noritsugu, Umehara (2014) Materials Selection for Eco-Aware Lightweight Friction Material. Mechanics & Industry. pp. 279-285. ISSN 2257-7777
tamaldin, noreffendy and Mat Yamin, Ahmad Kamal and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and ABDULLAH, Mohd Azman (2013) Design Optimization of Thermal Management System for Electric Vehicle Utilizing CFD Analysis, DFMEA and CES. Procedia Engineering , 68. pp. 305-312. ISSN 1877-7058
Zakaria, Nazri Huzaimi and Mohamad Zin, Mohd Rody and Abdollah, Mohd Fadzli bin and Saleman, Abdul Rafeq and Amiruddin, Hilmi and tamaldin, noreffendy (2013) Elastohydrodynamics Lubrication for Bio-Based Lubricants in Elliptical Conjunction. Procedia Engineering , 68. pp. 123-129. ISSN 1877-7058
Abdollah, Mohd Fadzli bin and Mazlan, Mohd Afiq Azfar and Amiruddin, Hilmi and tamaldin, noreffendy (2013) Frictional Behavior of Bearing Material Under Gas Lubricated Conditions. Procedia Engineering , 68. pp. 688-693. ISSN 1877-7058
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2013) Optimization of Tribological Performance of hBN/AL2O3 Nanoparticles as Engine Oil Additives. Procedia Engineering , 68. pp. 313-319. ISSN 1877-7058
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Mat Nuri, Nur Rashid (2013) Optimized Nanolubricant for Friction Reduction. In: 40th Leeds-Lyon Symposium on Tribology & Tribochemistry Forum 2013, 4 - 6 September 2013, Lyon, France.
Abdollah, Mohd Fadzli bin and tamaldin, noreffendy and Amiruddin, Hilmi and Mohd Zamberi, Mahanum and Rody, M. Z. M and Mat Kamal, Sushella Edayu (2012) Tribology-Related Researches at Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka (UTeM). In: Malaysia-Japan Tribology Meeting 2012, 27-28 August 2012, Kuala Lumpur.