Browse By Repository:

 
 
 
   

Items where Author is "Amiruddin, Hilmi"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 37.

Article

Amiruddin, Hilmi and Abdollah, Mohd Fadzli bin and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Abu Mansor, Mohd Radzi and Mamat, Rizalman and Alias, Azri (2017) Effect of Vaned Diffuser on the Performance of Small Turbocharger. Journal of Mechanical Engineering, SI 1 (1). pp. 227-236. ISSN 1823-5514

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid and Saleman, Abdul Rafeq (2017) The hBN Nanoparticles as an Effective Engine Oil Additive to Enhance the Durability and Performance of a Small Diesel Engine. Journal of Mechanical Engineering, SI 1 (1). pp. 103-112. ISSN 1823-5514

Mohmad, Martini and Abdollah, Mohd Fadzli and Tamaldin, Noreffendy and Amiruddin, Hilmi (2017) The Effect Of Dimple Size On The Tribological Performances Of A Laser Surface Textured Palm Kernel Activated Carbon-Epoxy Composite. Industrial Lubrication And Tribology, 69 (5). pp. 768-774. ISSN 0036-8792

Shuhimi, Fairuz Fazillah and Abdollah, Mohd Fadzli and Kalam, M.A. and Masjuki, Hassan and Mustafa, Ashafi’e and Mat Kamal, Sushella Edayu and Amiruddin, Hilmi (2017) Effect Of Operating Parameters And Chemical Treatment On The Tribological Performance Of Natural Fiber Composites : A Review. Particulate Science And Technology, 35 (5). pp. 512-524. ISSN 0272-6351

Mahmud, Dayang Nor Fatin and Abdollah, Mohd Fadzli and Masripan, Nor Azmmi and Tamaldin, Noreffendy and Amiruddin, Hilmi (2017) Frictional Wear Stability Mechanisms Of An Activated Carbon Composite Derived From Palm Kernel By Phase Transformation Study. Industrial Lubrication And Tribology, 69 (6). pp. 945-951. ISSN 0036-8792

Mustafa, Ashafi'e and Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Shuhimi, Fairuz Fazillah and Muhammad, Noryani (2017) Optimization Of Friction Properties Of Kenaf Polymer Composite As An Alternative Friction Material. Industrial Lubrication And Tribology, 69 (2). pp. 259-266. ISSN 0036-8792

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli and Hasan, Rafidah and Amiruddin, Hilmi and Abdullah, Muhammad Ilman Hakimi Chua (2017) Statistical Models For Predicting Wear And Friction Coefficient Of Palm Kernel Activated Carbon-Epoxy Composite Using The ANOVA. Industrial Lubrication And Tribology, 69 (5). pp. 761-767. ISSN 0036-8792

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2017) Tribological effects of nano-based engine oil diluted with biodiesel fuel. International Journal of Surface and Engineering, 11 (1). pp. 12-22. ISSN 1749-785X

Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi (2016) When should i change my tire? CARe Newsletter. p. 5. ISSN 2289-9871

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2016) The effect of sliding distance at different temperatures on the tribological properties of a palm kernel activated carbon–epoxy composite. Tribology International, 94. pp. 352-359. ISSN 0301-679X

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2016) The potential of hBN nanoparticles as friction modifier and antiwear additive in engine oil. Mechanics & Industry, 17 (1). pp. 1-6. ISSN 2257-7777

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2016) The Effect Of Sliding Distance At Different Temperatures On The Tribological Properties Of A Palm Kernel Activated Carbon-Epoxy Composite. Tribology International, 94 (-). pp. 352-359. ISSN 0301-679X

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and tamaldin, noreffendy and Amiruddin, Hilmi and Mat Nuri, Nur Rashid (2016) Effect of hexagonal boron nitride nanoparticles as an additive on the extreme pressure properties of engine oil. Industrial Lubrication And Tribology, 68 (4). pp. 441-445. ISSN 0036-8792

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Tamaldin, Noreffendy and Mat Nuri, Nur Rashid (2016) The Potential Of hBN Nanoparticles As Friction Modifier And Antiwear Additive In Engine Oil. Mechanics & Industry, 17 (1). pp. 1-6. ISSN 2257-7777

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2015) The effect of temperature on the tribological properties of palm kernel activated carbonepoxy composite. Tribology Online, 10 (6). pp. 428-433. ISSN 1881-2198

Mustafa, Ashafi'e and Abdollah, Mohd Fadzli bin and Shuhimi, Fairuz Fazillah and Ismail, N. and Amiruddin, Hilmi and Umehara, Noritsugu (2015) Selection and verification of kenaf fibres as an alternative friction material using weighted decision matrix method. Materials and Design, 67. pp. 577-582. ISSN 0261-3069

Chua, K.W. and Abdollah, Mohd Fadzli bin and Mat Tahir, Noor Ayuma and Amiruddin, Hilmi (2014) Potential of palm kernel activated carbon epoxy (PKAC-E) composite as solid lubricant: Effect of load on friction and wear properties. Jurnal Tribologi, 2. pp. 31-38. ISSN 2289-7232

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid and Hassan, Masjuki and Saleman, Abdul Rafeq (2014) Improving Engine Oil Properties by Dispersion of hBN/Al2O3 Nanoparticles. Applied Mechanics and Materials. pp. 70-73. ISSN 1660-9336

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Mat Nuri, Nur Rashid and tamaldin, noreffendy and Hassan, Masjuki and Saleman, Abdul Rafeq (2014) Effect of hBN/Al2O3 nanoparticles on engine oil properties. Energy Education Science and Technology Part A: Energy Science and Research. pp. 3261-3268. ISSN 1308-772X

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2014) Effect of hBN/Al2O3 Nanoparticle Additives on the Tribological Performance of Engine Oil. Jurnal Teknologi , 66 (3). pp. 1-6. ISSN 2180-3722

Abdollah, Mohd Fadzli and Mazlan, Mohd Afiq Azfar and Amiruddin, Hilmi and Tamaldin, Noreffendy (2014) Experimental Study on Friction and Wear Behaviors of Ball Bearings under Gas Lubricated Conditions. Jurnal Teknologi , 66 (3). pp. 43-49. ISSN 2180-3722

Mustafa, Ashafi'e and Abdollah, Mohd Fadzli bin and Ismail, Nurhidayah and Amiruddin, Hilmi and Noritsugu, Umehara (2014) Materials Selection for Eco-Aware Lightweight Friction Material. Mechanics & Industry. pp. 279-285. ISSN 2257-7777

tamaldin, noreffendy and Mat Yamin, Ahmad Kamal and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and ABDULLAH, Mohd Azman (2013) Design Optimization of Thermal Management System for Electric Vehicle Utilizing CFD Analysis, DFMEA and CES. Procedia Engineering , 68. pp. 305-312. ISSN 1877-7058

Zakaria, Nazri Huzaimi and Mohamad Zin, Mohd Rody and Abdollah, Mohd Fadzli bin and Saleman, Abdul Rafeq and Amiruddin, Hilmi and tamaldin, noreffendy (2013) Elastohydrodynamics Lubrication for Bio-Based Lubricants in Elliptical Conjunction. Procedia Engineering , 68. pp. 123-129. ISSN 1877-7058

Abdollah, Mohd Fadzli bin and Mazlan, Mohd Afiq Azfar and Amiruddin, Hilmi and tamaldin, noreffendy (2013) Frictional Behavior of Bearing Material Under Gas Lubricated Conditions. Procedia Engineering , 68. pp. 688-693. ISSN 1877-7058

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2013) Optimization of Tribological Performance of hBN/AL2O3 Nanoparticles as Engine Oil Additives. Procedia Engineering , 68. pp. 313-319. ISSN 1877-7058

Monograph

Tamaldin, Noreffendy and Rosley, Mohammad Nazry and Abdollah, Mohd Fadzli and Ramlan, Roszaidi and Mohamed Arifin, Yusmady and Amiruddin, Hilmi and Mat Nuri@Md Din, Nur Rashid (2017) Engine Performance And Emission Characteristics Of Hydrogen Enrichment In Light Duty Diesel Engine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Yamin, Ahmad Kamal and Tamaldin, Noreffendy and Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Ahmad, Fauzi (2015) Self-Assessment Report 2015 for Bachelor of Mechanical Engineering (Automotive) with Honours. Documentation. Universiti Teknikal Malaysia Melaka. (Unpublished)

Conference or Workshop Item

Amiruddin, Hilmi and Abdollah, Mohd Fadzli bin and Idris, A.M. and Abdullah, Muhammad Ilman Hakimi Chua and tamaldin, Noreffendy (2015) Stability of nano-oil by pH control in stationary conditions. In: Mechanical Engineering Research Day 2015, 31 March 2015, Melaka.

Abdullah, Adli Zil Ikram and Abdollah, Mohd Fadzli bin and Tee, Boon Tuan and Amiruddin, Hilmi and Mat Yamin, Ahmad Kamal and Tamaldin, Noreffendy (2015) Thermal performance of carbon-based microencapsulated phase change materials. In: Mechanical Engineering Research Day 2015, 31 March 2015, Melaka.

Amiruddin, Hilmi and Abdollah, Mohd Fadzli bin and Mazlan, Mohd Afiq Azfar and tamaldin, noreffendy (2014) Effect of Lubrication Environments on Wear Performance of Ball Bearing Materials. In: Proceedings of 41th Leeds-Lyon Symposium on Tribology 2014, 2-5 September 2014, Leeds, United Kingdom.

Abdollah, Mohd Fadzli bin and Abdullah, Muhammad Ilman Hakimi Chua and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2014) The hBN Nanoparticles as an Effective Additive in Engine Oil to Enhance the Durability and Performance of a Small Diesel Engine. In: Proceedings of 41th Leeds-Lyon Symposium on Tribology 2014, 2-5 September 2014, Leeds, United Kingdom.

Abdollah, Mohd Fadzli bin and Abdullah, Muhammad Ilman Hakimi Chua and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2014) Drive to Greener Future: Tribological and Engine Performances of Nano-Oil. In: JAST Tribology Conference, Spring 2014, 19 - 21 May 2014, Tokyo.

Ashafi'e, Mustafa and Abdollah, Mohd Fadzli bin and Ismail, Nurhidayah and Amiruddin, Hilmi and Umehara, Noritsugu (2014) Pre-Materials Selection for Eco-Aware Lightweight Friction Material. In: 9th International Materials Technology Conference and Exhibition, 13 - 16 May 2014, Kuala Lumpur.

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2014) The Effect on Friction Coefficient and Wear Rate of Palm Kernel Activated Carbon-Epoxy (PKAC-E) Composite at Different Temperatures. In: 3rd Malaysia-Japan Tribology Symposium 2014 (MJTS2014), 12-14 November 2014, Malaysia-Japan Internation Institute of Technology (MJJIT).

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Mat Nuri, Nur Rashid (2013) Optimized Nanolubricant for Friction Reduction. In: 40th Leeds-Lyon Symposium on Tribology & Tribochemistry Forum 2013, 4 - 6 September 2013, Lyon, France.

Abdollah, Mohd Fadzli bin and tamaldin, noreffendy and Amiruddin, Hilmi and Mohd Zamberi, Mahanum and Rody, M. Z. M and Mat Kamal, Sushella Edayu (2012) Tribology-Related Researches at Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka (UTeM). In: Malaysia-Japan Tribology Meeting 2012, 27-28 August 2012, Kuala Lumpur.

This list was generated on Mon Nov 19 20:23:44 2018 MYT.