Items where Author is "Azlan, Umar Al-Amani"

Abd Rashid, Mohd Warikh and Azlan, Umar Al-Amani and Shamsuri, Siti Rahmah and Mohamad Dom, Adibah Haneem and Azman, Muhd. Afiq Hafizuddin and Kasim, Shah Rizal and Mat Harttar@Mohd Hatta, Maziati Akmal (2024) Effect of manganese dopant on the structure and electrical properties of potassium sodium niobate thin film. Malaysian Journal of Microscopy, 20 (1). pp. 317-327. ISSN 2600-7444

Abd Rashid, Mohd Warikh and Mohd Ali Piah, Hidayah and Azlan, Umar Al-Amani and Mohd Hatta, Maziati Akmal and Kasim, Shah Rizal (2023) Influence of ZnO dopant on piezoelectric properties of potassium sodium niobate thin films. Journal of Advanced Research in Applied Mechanics, 111 (1). pp. 153-160. ISSN 2289-7895

Tamin, Norfauzi and Ng, Chuan Huat and Hamid, Abdul and Azlan, Umar Al-Amani (2023) Reducing the risk of agglomeration and shrinkage ceramic body from Al2O3-ZrO2 composition. Journal of Mechanical Engineering, 20 (3). pp. 223-237. ISSN 1823-5514

Azlan, Umar Al-Amani and Abd Rashid, Mohd Warikh and Jalaluddin, Mohamed Lokman (2023) A preliminary study of porous ceramics with carbon black contents. AIMS Materials Science, 10 (5). pp. 741-754. ISSN 2372-0484

Wan Mahmood, Wan Hasrulnizzam and Azlan, Umar Al-Amani (2020) QFD Approach In Determining The Best Practices For Green Supply Chain Management In Composite Technology Manufacturing Industries. Malaysian Journal on Composite Science and Manufacturing, 1 (1). pp. 45-56. ISSN 2716-6945

Abu Bakar, Mohd Hadzley and Tamin, Nor Fauzi and Azhar, Anis Afuza and Mokhtar, Muhammad Faiz and Hamed, Muhammad Fitri Naim and Azlan, Umar Al-Amani (2019) Fabrication And Machining Performance Of Ceramic Cutting Tool Based On The Al2O3-ZrO2-Cr2O3 Compositions. Journal of Materials Research and Technology, 8 (6). pp. 5114-5123. ISSN 2238-7854

Jumaidin, Ridhwan and Adam, Nur Wardah and Azlan, Umar Al-Amani and Hussin, Mohamed Saiful Firdaus and Mohammad Taha, Mastura and Mansor, Muhd Ridzuan and Yob, Mohd Shukri and Ahmad Ilyas, Rushdan (2019) Water Transport And Physical Properties Of Sugarcane Bagasse Fibre Reinforced Thermoplastic Potato Starch Biocomposite. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (2). pp. 273-281. ISSN 2289-7879

Osman, Mohd Hairizal and Mokhtar, Muhammad Faiz and Abu Bakar, Mohd Hadzley and Hamed, Muhammad Fitri Naim and Tamin, Nor Fauzi and Azlan, Umar Al-Amani and Aziz, A. A. and Noorazizi, S. (2019) Effect Of Hydraulic Pressure On Hardness, Density, Tool Wear And Surface Roughness In The Fabrication Of Alumina Based Cutting Tool. Journal of Advanced Manufacturing Technology, 13 (1). pp. 23-37. ISSN 2289-8107

Abu Bakar, Mohd Hadzley and Fahmi, Naim and Mokhtar, Faiz and Tamin, Nor Fauzi and Azlan, Umar Al-Amani and Adam, Abdul Aziz and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir (2018) Fabrication And Machining Performance Of Powder Compacted Alumina Based Cutting Tool. MATEC Web Of Conferences, 150. pp. 1-5. ISSN 2261-236X

Mohd Annuar, Khalil Azha and Harun, Mohamad Haniff and Nor Azmi, Muhammad Wahyuddin and Mohd Aras, Mohd Shahrieel and Azlan, Umar Al-Amani and Azahar, Arman Hadi and Mohd Ab Halim, Mohd Firdaus and Yaakub, Muhamad Faizal and Zainal Abidin, Amar Faiz (2018) A Study On The Potential Of Peltier In Generating Electricity Using Heat Loss At Engine And Exhaust Vehicle. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 49 (1). pp. 77-84. ISSN 2289-7879

Mat Harttar, Maziati Akmal and Abd Rashid, Mohd Warikh and Azlan, Umar Al-Amani and Azmi, Nurul Azuwa and Salleh, Mohd Shukor and Kasim, Mohd Shahir (2017) Optimizing The Processing Conditions Of Sodium Potassium Niobate Thin Films Prepared By Sol-Gel Spin Coating Technique. Ceramics International, 44. pp. 317-325. ISSN 0272-8842

Mohd Ab Halim, Mohd Firdaus and Azlan, Umar Al-Amani and Harun, Mohamad Haniff and Mohd Annuar, Khalil Azha and Manap, Mustafa and Johari, Siti Halma and Abdullah, Abdul Rahim and Hushim, Mohd Faisal (2017) Lighting Retrofit Scheme Economic Evaluation. Indonesian Journal Of Electrical Engineering And Computer Science, 5 (3). 496 - 501. ISSN 2502-4752

Abd Rashid, Mohd Warikh and Mat Harttar @ Mohd Hatta, Maziati Akmal and Azmi, Nurul Azuwa and Azlan, Umar Al-Amani (2017) The Effects Of Different Annealing Temperature And Number Of Deposition Layers On The Crystallographic Properties Sodium Niobate (KNN) Thin Films Synthesized By Sol-Gel Spin Coating Technique. Journal Of Advanced Manufacturing Technology, 11 (1). pp. 91-102. ISSN 1985-3157

Hashim, Hanizam and Mohamad, Noraiham and Azlan, Umar Al-Amani and Mohd Ahyan, Muhammad Qamaruddin (2017) Process Optimization Of EDM Cutting Process On Tool Steel Using Zinc Coated Electrode. MATEC Web Of Conferences, 97. pp. 1-5. ISSN 2261-236X

Mat Harttar @ Mohd Hatta, Maziati Akmal and Azlan, Umar Al-Amani and Abd Rashid , Mohd Warikh and Azmi, Nurul Azuwa (2015) Enhanced Structural And Electrical Properties Of Lead-Free Y-Doped (K, NA) NBO3 Thin Films. Jurnal Teknologi, 77 (21). pp. 67-71. ISSN 0127-9696

Mohamad, Noraiham and Abdul Hamid, Nor Nadiah and Abdul Aziz, Nor Abidah and Abd Razak, Jeefferie and Azlan, Umar Al-Amani and Dimin @ Mohd Amin, Mohd Fairuz and Shaaban, Azizah (2014) Potential of epoxidized natural rubber (ENR) as hydrophobicity contributor in chitosan-urea fertilizer. Applied Mechanics and Materials, 761. pp. 536-541. ISSN 1660-9336