Items where Author is "Liew, Pay Jun "

Article

Liew, Pay Jun and Othman, Intan Sharhida and Tee, Chee Yin and Chang, Siang Yee and Raja Abdullah, Raja Izamshah and Wang, Jingsi (2023) Electrical discharge coating of mild steel with fly ash suspension. Journal of Advanced Research in Applied Mechanics, 112 (1). pp. 1-9. ISSN 2289-7895

Liew, Pay Jun and Kursus Othman, Maisarah and Che Sidik, Nor Azwadi and Wang, Jingsi (2022) Recent progress on the application of nanofluids and hybrid nanofluids in machining: a comprehensive review. The International Journal of Advanced Manufacturing Technology, 121. pp. 1455-1481. ISSN 0268-3768

Wang, Jingsi and Liu, Xiaolong and Liew, Pay Jun and Zhu, Jiaqi and Li, Changhe and Huang, Chuanzhen (2022) Ultrasonic abrasive polishing of additive manufactured parts: An experimental study on the effects of process parameters on polishing performance. Advances in Production Engineering & Management, 17 (2). pp. 193-204. ISSN 1854-6250

Liew, Pay Jun and Kursus Othman, Maisarah and Chang, Siang Yee and Wang, J. and Yap, C.Y. (2022) Thermophysical properties of quarry dust suspension and aluminum oxide suspension as cutting fluid for machining. Journal of Advanced Manufacturing Technology (JAMT), 16 (1). pp. 1-10. ISSN 1985-3157

Wang, Jingsi and Liu, Xiaohan and Teng, Dezhi and Liew, Pay Jun and Huang, Chaoming (2022) Electrorheological fluid–assisted ultrasonic polishing for IN625 additively manufactured surfaces. The International Journal of Advanced Manufacturing Technology, 120 (1-2). pp. 891-905. ISSN 0268-3768

Liew, Pay Jun and Yap, Ching Yee and Othman, Intan Sharhida and Abdollah, Mohd Fadzli and Yan, Jiwang (2021) Tribological Characteristics Of Electrical Discharge Coated Layers Using Quarry Dust Suspension. Surface and Coatings Technology, 428. pp. 1-9. ISSN 0257-8972

Liew, Pay Jun and Tay, Hock Seng and Yap, Ching Yee and Othman, Intan Sharhida and Raja Abdullah, Raja Izamshah (2021) Tribological Behaviour Of Palm Oil Mixed With Fly Ash Microparticles As A Bio-Based Lubricant For Manufacturing Processes. Jurnal Tribologi, 31. pp. 73-83. ISSN 2289-7232

Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Rosman, Muhammad Rafiq and Lamat, Arshad and Salleh, Mohd Shukor and Liew, Pay Jun and Abdul Aziz, Mohd Sanusi and Abdullah, R.S.A. (2021) Effects of cutter geometry and cutting parameters on machining Al/SiC Metal Matrix Composites (MMC). International Journal of Nanoelectronics and Materials, 14 (SI). pp. 343-352. ISSN 1985-5761

Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Lamat, Arshad and Rosman, Muhammad Rafiq and Kasman, Muhammad Zaki and Liew, Pay Jun and Abdul Aziz, Mohd Sanusi and Raja Abdullah, Raja Syamsul Azmir (2021) Quality Evaluation On Rotary Ultrasonic Assisted Drilling For Chemically Strengthened Glass. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 353-362. ISSN 1985-5761

Liew, Pay Jun and Mohammad Zainudin, Norhazeratul and Yap, Ching Yee and Mohamad, Noraiham and Jingsi Wang (2021) Effect Of Peak Current And Pulse On Time On The Coating Layer Thickness Using Electrical Discharge Coating. Malaysian Journal on Composites Science and Manufacturing, 6 (1). pp. 14-20. ISSN 2716-6945

Mohamad, Noraiham and Abd Latiff, Anisah and Liew, Pay Jun and Kasim, Mohd Shahir and Abd Razak, Jeefferie and Ab Maulod, Hairul Effendy and Qumrul Ahsan (2021) Morphological Characteristics And Wear Mechanism Of Recycled Carbon Fibre Prepreg Reinforced Polypropylene Composites. Malaysian Journal on CompositesScience and Manufacturing, 5 (1). pp. 1-10. ISSN 2716-6945

Liew, Pay Jun and Yap, Ching Yee and Jiwang, Yan (2020) Surface Modification Of Tungsten Carbide Cobalt By Electrical Discharge Coating With Quarry Dust Suspension. International Journal of Advanced Manufacturing Technology, 111. pp. 2105-2116. ISSN 0268-3768

Liew, Pay Jun and Yap, Ching Yee (2020) Surface Modification Of Tungsten Carbide Cobalt By Electrical Discharge Coating With Quarry Dust Powder: An Optimisation Study. Materials Research Express, 7 (10). pp. 1-14. ISSN 2053-1591

Liew, Pay Jun and Wong, Kah Yan and Lau, Kok Tee and Jingsi, Wang (2020) Optimization Of Copper Via Filling Process For Flexible Printed Circuit Using Response Surface Methodology. Journal of Advanced Manufacturing Technology (JAMT), 14 (2). pp. 1-14. ISSN 1985-3157

Jingsi, Wang and Liew, Pay Jun and Jinlong, Wang and Fengming, Du and Keita, Shimada (2020) Processing Capabilities Of Micro Ultrasonic Machining For Hard And Brittle Materials: SPH Analysis And Experimental Verification. Precision Engineering, 63. pp. 159-169. ISSN 0141-6359

Liew, Pay Jun and Yap, Ching Yee and Wang, Jingsi and Zhou, Tianfeng and Yan, Jiwang (2020) Surface Modification And Functionalization By Electrical Discharge Coating: A Comprehensive Review. International Journal of Extreme Manufacturing, 2 (1). pp. 1-32. ISSN 2631-8644

Jingsi, Wang and Liew, Pay Jun and Jiaqi, Zhu (2019) Material removal in ultrasonic abrasive polishing of additive manufactured components. Applied Sciences, 9 (24). pp. 1-13. ISSN 2076-3417

Tianfeng, Zhou and Liew, Pay Jun and Fubin, Ma and Benshuai, Ruan and Xibin, Wang and Jia, Zhou (2019) Microlens array fabrication on WC mold using EDM milling with in situ electrode trimming. The International Journal Of Advanced Manufacturing Technology, 103 (5-8). pp. 3003-3011. ISSN 0268-3768

Liew, Pay Jun and Zainal, Nurlishafiqa and Ahsan, Qumrul and Zhou, T. and Yan, J. (2018) Experimental Investigation Of RB-SiC Using Cu–CNF Composite Electrodes In Electrical Discharge Machining. The International Journal Of Advanced Manufacturing Technology, 98 (9-12). pp. 3019-3028. ISSN 0268-3768

Liew, Pay Jun and Mohd Hajazi, Aini Syahida and Shaaroni, Ainusyafiqah and Sulaiman, Mohd Amri and Raja Abdullah, Raja Izamshah (2018) Investigation Of Effects Of Carbon Nanofiber Nanofluid In Drilling Of AISI 304 Stainless Steel. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 491-500. ISSN 1985-3157

Liew, Pay Jun and Shaaroni, Ainusyafiqah and Abd Razak, Jeefferie and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2017) Optimization Of Cutting Condition In The Turning Of AISI D2 Steel By Using Carbon Nanofiber Nanofluid. International Journal of Applied Engineering Research, 12 (10). pp. 2243-2252. ISSN 0973-4562

Liew, Pay Jun and Hashim, Umira Syafika and Abd Rahman, Md Nizam (2017) Effect Of Chilled Air Coolant On Surface Roughness And Tool Wear When Machining 2205 Duplex Stainless Steel. Journal of Advanced Manufacturing Technology (JAMT) , 11 (1). pp. 61-68. ISSN 1985-3157

Liew, Pay Jun and Shaaroni, Ainusyafiqah and Che Sidik, Nor Azwadi and Yan, Jiwang (2017) An Overview Of Current Status Of Cutting Fluids And Cooling Techniques Of Turning Hard Steel. International Journal of Heat and Mass Transfer, 114 (-). pp. 380-394. ISSN 0017-9310

Liew, Pay Jun and Abdul Razak, Muhammad Raziman and Hussein, Nur Izan Syahriah and Ahsan, Qumrul (2016) Experimental Investigation Of Electrical Discharge Machining Using Dielectric Fluid With Surfactant And Different Carbon Additives. International Journal Of Applied Engineering Research, 11 (15). pp. 8507-8510. ISSN 0973-4562

Mohd Amran, Md Ali and Siti Salmah, Mohd Sani and Zulkeflee, Abdullah and Liew, Pay Jun and Mohd Razali, Muhamad and Raja Izamshah , Raja Abdullah and Mohd Hadzley, Abu Bakar and Abu , Abdullah and Zolkarnain, Marjom (2015) Effect Of Different Coolant Medium On Warpage Deflection Using Moldflow Insight Analysis. Applied Mechanics And Materials, 761. pp. 42-46. ISSN 1662-7482

Raja Abdullah, Raja Izamshah and Yu, Aaron Lung and Mohamad, Effendi and Mohd Abid, Mohd Asyadi 'Azam and Sulaiman, Mohd Amri and Liew, Pay Jun and Abdul Aziz, Mohd Sanusi (2015) Optimization Of Milling Parameter For Untreated And Heat Treated Polyetheretherketones (PEEK) Biomaterials. Applied Mechanics And Materials, 761. pp. 293-297. ISSN 1662-7482

Md Ali, Mohd Amran and Hilmi, Hazwani and Mohd Sani, Siti Salmah and Abdullah, Zulkeflee and Mohamad, Effendi and Liew , Pay Jun (2014) Evaluation of Mechanical Performance of Homopolymer Polypropylene/Kenaf Fibre/ Binder using Full Factorial Method. Advanced Research in Materials Science, 1 (1). pp. 7-13. ISSN 2289-7992

Liew , Pay Jun and Yan , Jiwang and Kuriyagawa, Tsunemoto (2014) Fabrication of deep micro-holes in reaction-bonded SiC by ultrasonic cavitation assisted micro-EDM. International Journal of Machine Tools & Manufacture. pp. 13-20. ISSN 0890-6955

Liew , Pay Jun and Yan , Jiwang and Kuriyagawa, Tsunemoto (2013) Experimental investigation on material migration phenomena in micro-EDM of reaction-bonded silicon carbide. Applied Surface Science. pp. 731-743. ISSN 0169-4332

Liew , Pay Jun and Yan , Jiwang and Kuriyagawa, Tsunemoto (2013) Carbon nanofiber assisted micro electro discharge machining of reaction-bonded silicon carbide. Journal of Materials Processing Technology. pp. 1076-1087. ISSN 0924-0136

Liew , Pay Jun and Shimada, Keita and Mizutani, Masayoshi and Yan , Jiwang and Kuriyagawa, Tsunemoto (2013) Fabrication of Microstructures on RB-SiC by Ultrasonic Cavitation Assisted Micro-Electrical Discharge Machining. International Journal of Automation Technology. pp. 621-629. ISSN 881-7629

Liew, Pay Jun and Yan , Jiwang and Masaki, Takeshi and Kuriyagawa, Tsunemoto (2012) Effect of Different Dielectric Fluids on Micro EDM of Low Conductivity Ceramic Material RB-SiC. Advanced Materials Research. pp. 529-534. ISSN 10226680

Conference or Workshop Item

Md Ali, Mohd Amran and Raja Abdullah, Raja Izamshah and Hussein, Nur Izan Syahriah and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Salleh, Mohd Rizal and Mohamad, Effendi and Subramonian, Sivarao and Liew, Pay Jun and Abdullah, Zulkeflee (2014) Performance of wire-EDM parameters on machining characteristics of titanium alloy (Ti6Al4V) using Taguchi method. In: Malaysia University Conference Engineering Technology 2015, 10-11 November 2014, Melaka.

Kamalrudin, massila and Mohan, Sharmini and Liew , Pay Jun and Abdullah, Rosmiza (2008) The mold cost estimation calculator for plastic injection mold manufacturing. In: ITSim 2008, 26-28 Aug. 2008 , Kuala Lumpur,Malaysia.