Items where Author is "Md Ali , Mohd Amran"
 | Up a level |
Md Ali, Mohd Amran and Mohd Ali, Noorfa Idayu and Md Fauadi, Muhammad Hafidz Fazli and Razak, Zakaria and K.J. Khadim (2023) Optimization of injection moulding parameters in reducing cavity pressure using Taguchi method. Journal of Advanced Manufacturing Technology (JAMT), 17 (2). pp. 31-42. ISSN 1985-3157
Md Ali, Mohd Amran and Mohd Ali, Noorfa Idayu and Salleh, Mohd Shukor and Abdullah, Muhammad Ilman Hakimi Chua and Subramonian, Sivarao and Yamaguchi, Masayuki (2023) Optimization of compression moulding parameters on mechanical properties of stainless steel 316L. Journal of Advanced Manufacturing Technology (JAMT), 17 (1). pp. 47-58. ISSN 1985-3157
Subramonian, Sivarao and Kumaran, K. and Dharsyanth, R. and Md Ali, Mohd Amran and Salleh, Mohd Shukor and Pujari, Satish and Ramasamy, Devarajan and Vatesh, Umesh Kumar and Mahdi Al-Obaidi, Abdulkareem Sh and Ramesh, S. and Lee, Kit Yee Sara (2023) Predictive modeling of dimensional accuracies in 3D printing using artificial neural network. Journal Of Engineering Science And Technology, 18 (4). pp. 2148-2160. ISSN 1823-4690
Kasim, Mohd Shahir and Husshini, Nur Husnina Najeah and Raja Abdullah, Raja Izamshah and Mohd Shahrim, Mohammad Shah All Hafiz and W. Mohamad, W Noor Fatihah and Md Ali, Mohd Amran and Abu Bakar, Mohd Hadzley (2021) Current Summary Of Surface Integrity When Machining Inconel 718 Under Different Cooling And Lubrication Strategies. Jurnal Tribologi, 29. pp. 144-155. ISSN 2289-7232
Subramonian, Sivarao and Abdul Khalim, Abdul Zuhair and Salleh, Mohd Shukor and Md Ali, Mohd Amran and Kadirgama, Kumaran and U.K. Dubey and Pujari, Satish and Dhar Malingam, Sivakumar (2021) Artificial neural network predictive modelling of laser micro-grooving for commercial pure titanium (CP Ti) grade 2. Journal of Mechanical Engineering, 18 (2). pp. 217-234. ISSN 1823-5514
Md Ali, Mohd Amran and Mohd Ali, Noorfa Idayu and Abdullah, Zulkeflee and Subramonian, Sivarao and Abdul Aziz, Mohd Sanusi and Wan Muhammad, Wan Nur Azrina and Abu Bakar, Mohd Hadzley and Wakhi Anuar, Nur Farah Bazilah (2021) Fill Time Optimization Analysis In Flow Simulation Of Injection Molding Using Response Surface Method. Malaysian Journal on Composites Science and Manufacturing, 4 (1). pp. 28-39. ISSN 2716-6945
Subramonian, Sivarao and Jayahkundy, Raguvaran and Ali, Aidy and Abdullah, Mohamad Faizal and Dhar Malingam, Sivakumar and Md Ali, Mohd Amran and Arep @ Ariff, Hambali and Salleh, Mohd Shukor and Vates, Umesh Kumar (2019) Investigation of tyre pressure drop phenomenon using specially designed real-time data mining and storage system. International Journal of Recent Technology and Engineering, 7 (5S4). pp. 533-537. ISSN 2277-3878
Abu Bakar, Mohd Hadzley and Abdul Manap, Muhamad Naim Fahmi and Tamin, Nor Fauzi and Azhar, Anis Afuza and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Md Ali, Mohd Amran and Shamsudin, Noorazizi and Mohamad Raffi, Nurul Fatin (2019) Surface Integrity Study For FC300 Cast Iron Using TiAIN Ball End Mill. Jurnal Tribologi, 21. pp. 35-46. ISSN 2289-7232
Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Raja Abdullah, Raja Izamshah and Akmal, Suriati and Md Ali, Mohd Amran and Abu Bakar, Mohd Hadzley and Salleh, Mohd Shukor (2018) Investigation Of Tangential Force On Ball Nose Rake Face During High-Speed Milling Of Inconel 718. Advances In Materials And Processing Technologies, 4 (3). pp. 1-7. ISSN 2374-0698
Ishak, Anuar and Mohamad, Effendi and Sukarma, Lukman and Salleh, Mohd Shukor and Salleh, Mohd Rizal and Mohamad, Noraiham and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran (2018) Cleaner Production Implementation In An E-Waste Recovery Plant By Using The Value Stream Mapping. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 55-67. ISSN 1985-3157 (Unpublished)
Md Ali, Mohd Amran and Abdullah, Abu and Mohamad, Effendi and Salleh, Mohd Shukor and Hussein, Nur Izan Syahriah and Muhammad, Z. and Dahaman, Shamshulizam (2018) Tensile properties of ternary blends for HDPE/PP/Recycle HDPE in blow moulding process. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1(2)). pp. 31-41. ISSN 1985-3157
Md Ghazaly, Mariam and Ho, Carl Choon and Jamaludin, Irma Wani and Soo, Kok Yew and Yaacob, Mohd Rusdy and Abdullah, Zulkeflee and Md Ali, Mohd Amran (2017) Parameter Analysis Of A Remotely Controlled Home Monitoring System Using Mobile Robot Via Camera. Jurnal Teknologi, 79 (2). pp. 81-88. ISSN 0127-9696
Md Ali, Mohd Amran and Mohd Ali, Noorfa Idayu and Abdullah, Zulkeflee and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Abdul Aziz, Mohd Sanusi and Abdullah, Abu (2017) Interchangeable Core And Cavity Plates For Two-Plate Family Injection Mould. Journal Of Mechanical Engineering And Sciences (JMES), 11 (3). pp. 2815-2824. ISSN 2289-4659
Md Ali, Mohd Amran and Abdul Aziz, Mohd Sanusi and Redzuwan, Bahrin Ikram and Muhammad Zaimi, Zainal Abidin and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Mizobuchi, Akira and Ishida, Tohru (2017) Mechanical Properties And Cutting Performance Of Electroless Ternary Ni-W-P Coated Cutting Tools. Jurnal Teknologi , 79 (5-2). pp. 101-104. ISSN 2180-3722
Seemork, Jiraporn and Sako, Takumi and Md Ali, Mohd Amran and Yamaguchi, Masayuki (2017) Rheological Response Under Nonisothermal Stretching For Immiscible Blends Of Isotactic Polypropylene And Acrylate Polymer. Journal Of Rheology, 61 (1). pp. 1-11. ISSN 0148-6055
Md Ghazaly, Mariam and Abdullah, Zulkeflee and Md Ali, Mohd Amran and Che Amran, Aliza and Chong, Shin Horng (2017) Trajectory Tracking Of A Mobile Robot System. Journal of Mechanical Engineering, S1 (1). pp. 207-226. ISSN 1823-5514
Ali, Aidy and Subramonian, Sivarao and Md Ali, Mohd Amran and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Performance evaluation of reworked weld joints. International Journal of Engineering and Technologies, 9. pp. 5-12. ISSN 2297-623X
Salleh, Mohd Shukor and Omar, Mohd Zaidi and Alhawari, Khalid Salim and Mohammed, Mohammed Naser and Md Ali, Mohd Amran and Mohamad, Effendi (2016) Microstructural evolution and mechanical properties of thixoformed A319 alloys containing variable amounts of magnesium. Transactions of Nonferrous Metals Society of China, 26. pp. 2029-2042. ISSN 1003-6326
Yusri, Izzati and Md Ghazaly, Mariam and Ali Al-Andoli, Esmail Ali and Rahmat, Mohd Fua'ad and Zulkeflee, Abdullah and Md Ali, Mohd Amran and Ranom, Rahifa (2016) Optimization Of The Force Characteristic Of Rotary Motion Type Of Electromagnetic Actuator Based On Finite Element Analysis. Jurnal Teknologi , 78 (9). pp. 13-20. ISSN 2180-3722
Subramonian, Sivarao and Kasim, Mohd Shahir and Md Ali, Mohd Amran and Raja Abdullah, Raja Izamshah and Anand, T Joseph Sahaya (2015) Micro-Drilling Of Silicon Wafer By Industrial CO2 Laser. International Journal of Mechanical and Materials Engineering , 10 (2). pp. 1-6. ISSN -
Subramonian, Sivarao and Raguvaran, Jayahkudy and Md Ali, Mohd Amran and T., Joseph Sahaya Anand and Qumrul, Ahsan and Raja, Izamshah (2015) Way forward to halt pressure loss in automotive tyres. Applied Mechanics and Materials, 761. pp. 510-514. ISSN 1660-9336
Ibrahim, Mohamad Amran and Mohamad, Effendi and Arzmi, Muhammad Hazwan and A Rahman, Muhamad Arfauz and Saptari, Adi and Shibghatullah, Abdul Samad and Sulaiman, Mohd Amri and Md Ali, Mohd Amran (2015) Enhancing efficiency of die exchange process through single minute of exchanging die at a textile manufacturing company in Malaysia. Journal of Applied Sciences. pp. 456-464. ISSN 1812-5654
Abdullah, Zulkeflee and Janin @ Abd. Karim, Nurul Fadzlina and Md Ali, Mohd Amran and Shamsudin, Shamsul Anuar and Kasim, Mohd Shahir and Samat, Khairul Fadzli (2015) Design And Development Of Weaving Aid Tool For Rattan Handicraft. Applied Mechanics and Materials, 761 (-). pp. 277-281. ISSN 1660-9336
Md Ali, Mohd Amran and K.M, Faizal and Salleh, Mohd Shukor and Sulaiman, Mohd Amri and Mohamad, Effendi (2015) Design Consideration For Design A Flat And Ring Plastics Part Using Solidworks Software. IOP Conference Series: Materials Science And Engineering, 100 (1). pp. 1-9. ISSN 1757-8981
Md Ali, Mohd Amran and M., Faizal and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Subramonian, Sivarao (2015) Product And Tooling Design Of Slanted Glass Injection Mould For Visualization Of Flow Molten Plastic. Jurnal Teknologi, 77 (21). pp. 9-18. ISSN 0127-9696
Md Ali, Mohd Amran and Hilmi, Hazwani and Mohd Sani, Siti Salmah and Abdullah, Zulkeflee and Mohamad, Effendi and Liew , Pay Jun (2014) Evaluation of Mechanical Performance of Homopolymer Polypropylene/Kenaf Fibre/ Binder using Full Factorial Method. Advanced Research in Materials Science, 1 (1). pp. 7-13. ISSN 2289-7992
Raja Izamshah Raja Abdullah (2014) A plastic wall tile and method of manufacturing thereof. PI 2014703490.
Md Ali, Mohd Amran and Raja Abdullah, Raja Izamshah and Hussein, Nur Izan Syahriah and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Salleh, Mohd Rizal and Mohamad, Effendi and Subramonian, Sivarao and Liew, Pay Jun and Abdullah, Zulkeflee (2014) Performance of wire-EDM parameters on machining characteristics of titanium alloy (Ti6Al4V) using Taguchi method. In: Malaysia University Conference Engineering Technology 2015, 10-11 November 2014, Melaka.
Md Ali, Mohd Amran and Laily, Suraya and Fatin, Aisyah and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Bukhari and Mohd Amri, Lajis and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Taufik, Roni Sahroni (2014) The Performance of Brass Electrode on Material Removal for Aluminium Composite in EDM Die-Sinking. Applied Mechanics and Materials, 660. pp. 43-47. ISSN 1662-7482
Roni Sahroni, Taufik and Kamaruddin, Mohammad Aizrulshah and Kasim, Mohd Shahir and Md Ali, Mohd Amran and Mohamad, Effendi and Ito, Teruaki (2014) Design and optimization of runner and gating systems for permanent mould casting. In: 24th Design Engineering Systems Division JSME Conference Japan Society of Mechanical Engineers, 17-19th September, JSME Conference Japan Society of Mechanical Engineers, .
Md Ali, Mohd Amran and Salmah, Siti and Zaki, Mohd and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) The Effect of Pressure on Warpage of Dumbbell Plastic Part in Injection Moulding Machine. Advanced Materials Research, 903. pp. 61-66. ISSN 1662-8985
Md Ali, Mohd Amran and Suraya, Laily and Assyura, Nor and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Bukhari and Lajis, Mohd Amri (2014) The Effect of EDM Die-Sinking Parameters on Non-Conductive Materials. Advanced Materials Research, 903. pp. 56-60. ISSN 1662-8985
Md Ali, Mohd Amran and Salmah, Siti and Abdul Aziz, Mohd Sanusi and Mohd Yuhazri, Yaakob and Noraiham, Mohamad and Mohd Abid, Mohd Asyadi Azam and Zulkeflee, Abdullah and mohamad , effendi (2014) Surface Roughness Optimization in Drilling Process Using Response Surface Method (RSM). Jurnal Teknologi (Sciences and Engineering), 66 (3). pp. 29-35. ISSN 21803722
Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Abdul Aziz, Mohd Sanusi and Mohd Abid, Mohd Asyadi 'Azam and Che Haron, Che Hassan and A Ghani, Jaharah (2014) The Influence Of Cutting Parameter On Heat Generation In High-Speed Milling Inconel 718 Under MQL Condition. Journal of Scientific & Industrial Research (JSIR), 73 (1). pp. 62-65. ISSN 0975-1084 (Online); 0022-4456 (Print)
Raja Abdullah, Raja Izamshah and Hassan, Zulhairy and Kasim, Mohd Shahir and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Sulaiman, Mohd Amri and Subramonian, Sivarao (2014) Cutter Path Strategies For Shoulder Milling Of Thin Deflecting Walls. Advanced Materials Research, 903 (-). pp. 175-180. ISSN 1662-8985
Md Ali, Mohd Amran and Laily, Suraya and Nor, Halida Ilyani Kamarudin and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Bukhari and Lajis, Mohd Amri and Raja Izamshah , Raja Abdullah and Abu Bakar, Mohd Hadzley and Taufik, Roni Sahroni (2014) The Effect of EDM Die-Sinking Parameters on Material Characteristic for Aluminium Composite Using Tungsten Copper Electrode. Applied Mechanics and Materials, 465-466. pp. 1214-1218. ISSN 1662-7482
Md Ali, Mohd Amran and Laily, Suraya and Kamarudin, NOR Halida Ilyani and Hussein, Nur Izan Syahriah and Mohd Razali, Muhamad and Bukhari, Mashoor and Lajis, Mohd Amri and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Taufik, Roni Sahroni (2014) The Effect of EDM Die-sinking Parameters on Material Characteristic for Aluminium Composite Using Tungsten Copper Electrode. Applied Mechanics and Materials. pp. 1214-1218. ISSN 1662-7482
Md Ali, Mohd Amran and Laily, Suraya and Nor Assyura, Nor and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Mohd Bukhari and Lajis, Mohd Amri (2014) The Effect of EDM Die-sinking Parameters on Non-conductive Materials. Applied Mechanics and Materials. pp. 56-60. ISSN 1662-7482
Raja Abdullah, Raja Izamshah and Mohd Nawawi, Nurul Husna and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) Effects Of Cutter Geometrical Features On Machining Polyetheretherketones (PEEK) Engineering Plastic. Journal of Mechanical Engineering and Sciences (JMES), 6 (-). pp. 863-872. ISSN 2289-4659
Abu Bakar, Mohd Hadzley and Ahmad, Siti Sarah Nadia and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Mohamad Raffi, Nurul Fatin (2014) Evaluation Of The Surface Integrity When Machining LM6 Aluminum Metal Matrix Composites Using Coated And Uncoated Carbide Cutting Tools. Applied Mechanics and Materials, 465-16 (-). pp. 1049-1053. ISSN 1660-9336
Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Mohamad, Effendi and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Saedon, Juri (2014) Multi-Objective Optimization Using Box-Behken Of Response Surface Methodology For High-Speed Machining Of Inconel 718. Applied Mechanics and Materials, 629 (-). pp. 487-492. ISSN 1660-9336
Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Mohamad, Effendi and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Saedon, Juri (2014) Multi-Objective Optimization Using Box-Behnken Of Response Surface Methodology For High-Speed Machining Of Inconel 718. Applied Mechanics and Materials, 629. pp. 487-492. ISSN 1662-7482
Mohamad, Effendi and T., Ito and D., Yuniawan and Ibrahim, Mohamad Amran and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad and Md Ali, Mohd Amran (2014) A Proposal Of Muda Indicator Agent To Estimate Lean Manufacturing Verification. Journal Of Advanced Manufacturing Technology, 8 (2). pp. 71-82. ISSN 1985-3157
Mohamad, Effendi and Ito, Teruaki and Yuniawan, Dani and Ibrahim, Mohamad Amran and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad and Md Ali, Mohd Amran (2014) A Proposal Of Muda Indicator Agent To Estimate Lean Manufacturing Verification. Journal of Advanced Manufacturing Technology (JAMT) , 8 (2). pp. 71-82. ISSN 1985-3157
Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Ahmad, Siti Sarah Nadia and Mohamad Raffi, Nurul Fatin (2014) Surface Integrity Of LM6 Aluminum Metal Matrix Composite When Machined With High Speed Steel And Uncoated Carbide Cutting Tools. Journal of Mechanical Engineering and Sciences (JMES), 6 (-). pp. 854-862. ISSN 2289-4659
Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Yusoff, Wan Azahar and Wijeyesekera, Devapriya and Hasanah, Tuan Noor (2014) Surface Observation Of Hollow Tube Mat After Sintering And Cutting Process. International Symposium on Research in Innovation and Sustainability 2014, 26 (5). pp. 1895-1898. ISSN 1013-5316
Laily, Suraya and Md Ali, Mohd Amran and Nur Izan Syahriah, Hussein and Mohd Razali, Muhamad and Manshoor, Bukhari and Mohd Amri, Lajis and Raja Izamshah , Raja Abdullah and Abu Bakar, Mohd Hadzley and Taufik , Roni Sahroni (2014) TAGUCHI METHOD PREDICTION OF EDM DIE-SINKING PARAMETERS ON SURFACE INTEGRITY FOR ALUMINIUM COMPOSITE USING COPPER ELECTRODE. Sci.Int.(Lahore), 26 (4). pp. 1455-1458. ISSN ISSN 1013-5316; CODEN: SINTE 8
Md Ali, Mohd Amran and Salmah, Siti and Zolkarnain, Marjom and Umar , Al-amani and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Zulkeflee, Abdullah and Abdul Aziz, Mohd Sanusi (2014) WARPAGE ANALYSIS VERIFICATION BETWEEN SIMULATION AND EXPERIMENTAL OF DUMBBELL PLASTIC PART IN THE INJECTION MOULDING PROCESS. Sci.Int.(Lahore), 26 (4). pp. 1575-1579. ISSN ISSN 1013-5316
Md Ali, Mohd Amran and Mohd Sani, Siti Salmah and Mohd, Zaki and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) The effect of pressure on warpage of dumbbell plastic part in injection moulding machine. Applied Mechanics and Materials, 529. pp. 61-66. ISSN 1662-7482.
Mohamad, Effendi and Ito, Teruaki and Yuniawan, Dani and Ibrahim, M. A. and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad and Md Ali, Mohd Amran (2014) A proposal of Muda Indicator agent to estimate Lean Manufacturing verification. Journal of Advanced Manufacturing Technology (JAMT) , 8 (2). pp. 71-82. ISSN 1985-3157
RAJA ABDULLAH, RAJA IZAMSHAH and YAAKOB, MOHD YUHAZRI and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Subramonian, Sivarao (2013) Effects of End Mill Helix Angle on Accuracy for Machining Thin-Rib Aerospace Component. Applied Mechanics and Materials , 315 (2013). pp. 773-777. ISSN 1662-7482
Md Ali, Mohd Amran and M., Samsul and HUSSEIN, NUR IZAN SYAHRIAH and Mohd Rizal , Salleh and Raja Izamshah , Raja Abdullah and Mohd , Hadzley and Mohd Shahir, Kasim and Mohd Amri , Sulaiman and Sivarao, Subramonian (2013) The Effect of Edm Die-sinking Parameters on Material Removal Rate of Beryllium Copper Using Full Factorial Method. Middle-East Journal of Scientific Research. pp. 44-50. ISSN 1990-9233
Yamaguchi, Masayuki and Yokohara , Tadashi and Md Ali , Mohd Amran (2013) Effect of flexible fibers on rheological properties of poly(Lactic Acid) composites under elongational flow. Journa of the Society of Rheology Japan. pp. 129-135. ISSN 0387-1533
Hussein, Nur Izan Syahriah and Md Ali, Mohd Amran and Sivarao, Subramonian (2012) Effect of CNC Ball Nose End Milling Process Parameters on Surface Roughness and Chip Length of Aluminium Alloy 6061. Universiti Teknikal Malaysia Melaka, pp. 1-3. ISBN 978-967-0257-16-7
Md Ali, Mohd Amran and Raja, Izamshah and Abu Bakar, Mohd Hadzley and Sivarao, Subramonian and Hussein, Nur Izan Syahriah (2012) Mechanical Properties of Polypropylene Composites Containing Polymer Fibers. In: International Conference on Design and Concurrent Engineering, iDECON2012. Universiti Teknikal Malaysia Melaka, pp. 239-242. ISBN 978-967-0257-16-7
Md Ali, Mohd Amran and Mohd Sani, Siti Salmah and Raja Abdullah, Raja Izamshah and Abu Bakar, Md Ali and Sivarao, Subramonian and HUSSEIN, NUR IZAN SYAHRIAH and Hussain, Mohamad Zaki (2012) Optimization Parameters of Injection Moulding Machine For Reducing Warpage of Dog Bone Plastic Part. In: The 28th International Conference Of The Polymer Processing Society (PPS-28), 11-15 December, Pattaya.