Items where Author is "Minhat, Mohamad"

Article

Mohamed, Saiful Bahri and Tengku Sulaiman, Tengku Mohd Sharir and Minhat, Mohamad and Mohamed, Ahmad Syafiq and Mohamed, Ahmad Ridhuan and Yusof, Siti Nurul Akmal (2020) File And Pc-Based CNC Controller Using Integrated Interface System (I2S). Journal of Advanced Research in Applied Mechanics, 70 (1). pp. 1-8. ISSN 2289-7895

Ani, Mohammad Firdaus and Fukumi, Minoru and Kamat, Seri Rahayu and Minhat, Mohamad and Husain, Kalthom (2019) Development Of Driving Fatigue Strain Index Using Fuzzy Logic To Analyze Risk Levels Of Driving Activity. IEEJ Transactions on Electrical and Electronic Engineering, 14 (12). pp. 1764-1771. ISSN 1931-4973

Othman, Muhammad Azri and Minhat, Mohamad and Jamaludin, Zamberi (2019) A Framework Of Next Generation Adaptive CNC Controller. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (11S2). pp. 288-293. ISSN 2278-3075

Salleh, Mohd Shukor and Minhat, Mohamad and Hussein, Nur Izan Syahriah and Abdul Rahim, Mohd Aidil Shah (2018) A Comprehensive Review On Cold Work Of AISI D2 Tool Steel. Metallurgical Research & Technology, 115 (1). pp. 1-12. ISSN 2271-3646

Abdul Rahim, Mohd Aidil Shah and Minhat, Mohamad and Hussein, Nur Izan Syahriah (2018) Current Research Trends In Wire Electrical Discharge Machining (WEDM): A Review. Journal of Advanced Manufacturing Technology (JAMT), 12 (1). pp. 11-23. ISSN 2289-8107

Jamaludin, Zamberi and Mat Seman, Norhidayah and Minhat, Mohamad and Che Ku Junoh, Sahida (2018) Design Of A CAD/CAM-Simulink Data Exchange System For Machine Tool Application. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1(2)). pp. 1-13. ISSN 1985-3157

Mat Seman, Norhidayah and Jamaludin, Zamberi and Minhat, Mohamad (2018) System Interface Design For CAD/CAM-Simulink Data Exchange System Using MATLAB. Intelligent Manufacturing & Mechatronics, LNME. pp. 639-647. ISSN 2195-4356

Minhat, Mohamad and Sulaiman, Mohd Amri and Kasim, Mohd Shahir (2014) RETROFITTING A CONVENTIONAL LATHE TO A DIGITAL INTELLIGENCE SYSTEM. Journal of advanced Manufacturing Technology (AMT). pp. 1-8. ISSN Nil (Submitted)

Minhat, Mohamad (2014) An Open STEP-NC Controller Via LabVIEW platform. Periodical of Applied Mechanics and Materials Vol 660 in 2014, 660 (873). pp. 1-5. ISSN 10.4028/www.scientific.net/AMM.660.873

Mohamed, Saiful Bahri and Abbas, Adnan Jameel and Minhat, Mohamad (2014) A Review on Intelligence STEP-NC Data Model and Function Blocks CNC Machining Protocol. Advanced Materials Research. pp. 779-845. ISSN 10.4028/www.scientific.net/AMR.845.779

Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Minhat, Mohamad and Mohamad, Noraiham and Che Haron, Che Hassan and A Ghani, Jaharah and Saedon, Juri and Saad, Nor Hayati and Mohamed, Saiful Bahri (2014) Prediction Of Cutting Force In End Milling Of Inconel 718. Journal of Engineering and Technology (JET), 5 (2). pp. 63-70. ISSN 2180-3811

Minhat, Mohamad and Abd. Rahman, Md Nizam (2013) A mild steel shear zone temperature minimization using genetic algorithm and direct search toolbox in cnc turning operation. International Review of Mechanical Engineering, 7 (1). pp. 38-45. ISSN 1970-8734 (In Press)

Abbas, Adnan Jameel and Minhat, Mohamad and Abd Rahman, Md Nizam (2012) Optimization of Machining Parameters in Turning Operation Using PSO and AIS Algorithms: A Survey. Scottish Journal of Arts, Social Sciences and Scientific Studies , 7 (1). ISSN ISSN 2047-1278

Minhat, Mohamad (2012) Interoperable CNC Machine via Function Block and STEP-NC Data Model for Milling Operation. Applied Mechanics and Materials, 229-23. pp. 2365-2369. ISSN 1660-9336

Minhat, Mohamad (2011) A Framework for a Development of an Intelligent CNC Controller Based on STEP-NC. Advanced Materials Research , 383 - . pp. 984-989. ISSN 10.4028/www.scientific.net/AMR.383-390.984

Arep@Ariff, Hambali and Minhat, Mohamad (2010) Concurrent Decisions using Analytical Hierarchy Process at the Conceptual Design Stage. Journal of Advanced Manufacturing Technology (JAMT) , 5 (1). pp. 79-85. ISSN 1985-3157

Sivarao, Subramonian and T.J.S, Anand and Ariff, Hambali and Minhat, Mohamad and Azni, Faizul (2010) Review of Automated Machines towards Devising A New Approach in Developing Semi-Automated Grass Cutter. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol: 10 No: 04, 10 (4).

Minhat, Mohamad and Vyatkin, Valeriy and Xu, Xun and Wong, Soon and Al-Bayaa, Zina (2009) A novel open CNC architecture based on STEP-NC data model and IEC 61499 function blocks. Robotics and Computer Integrated Manufacturing, 25. pp. 560-569.

Minhat, Mohamad and Vyatkin, Valeriy and Xu, Xun (2009) STEPNCMillUoA: A CNC system based on STEP-NC and Function Block architecture. . International Journal of Mechatronics and Manufacturing Systems, 2 (1/2). pp. 3-19.

Book Chapter

Minhat, Mohamad and Xu, Xun (2008) Characteristics and Technologies of Advanced CNC Systems. In: Encyclopedia of Information Science and Technology. IGI Global, Hershey, PA 17033-1240, USA, pp. 519-526.

Conference or Workshop Item

Minhat, Mohamad and Abd Rahman, Md Nizam and Abbas, Adnan Jameel (2014) Prediction of Optimum Cutting Conditions in Dry Turning Operations of S45C Mild Steel using AIS and PSO Intelligent Algorithm. In: international symposium on Research in Innovation and Sustainability 2014 (ISoRIS2014), 15-16 October 2014, Malacca.

Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Mohamad, Effendi and Abu Bakar, Mohd Hadzley and Minhat, Mohamad (2014) Analysis of Tool Performance during Ball-end Milling of Aluminium Alloy 6061-T6. In: iDECON 2014 – International Conference on Design and Concurrent Engineering, 21 - 23 September 2014, Melaka.

Jamaludin, Zamberi and Minhat, Mohamad (2014) Review on Cutting Force Compensation Techniques for Machine Tools Application. In: iDECON 2014 – International Conference on Design and Concurrent Engineering, 21 - 23 September 2014, Melaka.

Minhat, Mohamad and Abd Rahman, Md Nizam and Abbas, Adnan Jameel (2014) Cutting Parameters Optimization of Mild Steel via AIS Heuristics Algorithm. In: iDECON 2014 – International Conference on Design and Concurrent Engineering, 21 - 23 September 2014, Melaka.

Minhat, Mohamad and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) RETROFITTING A CONVENTIONAL LATHE TO A DIGITAL INTELLIGENCE SYSTEM. In: International Conference on Artificial Intelligence and Computer Science (AICS 2014), 15 - 16 September 2014, Bandung, Indonesia.

Minhat, Mohamad and Kasim, Mohd Shahir (2014) MACHINING PARAMETERS OPTIMIZATION FOR TRIMMING OPERATION IN A MILLING MACHINE USING TWO LEVEL FACTORIAL DESIGN. In: 5th International Conference on Mechanical, Industrial and Manufacturing Technologies MIMT2014, 10-11 March 2014, Penang Malaysia. (Submitted)

Ahmad, NurulHuda and Kamat, Seri Rahayu and Minhat, Mohamad and Bani Hashim, Ahmad Yusairi and Isa, Halim (2014) Modeling an ergonomic driving for in-car interaction: A propose framework. In: International Conference on Industrial Engineering and Operations Management (IEOM2014), January 7 – 9, 2014, Bali, Indonesia.

Mohamed, Saiful Bahri and Abbas, Adnan Jameel and Minhat, Mohamad (2013) A Review on Intelligence STEP-NC Data Model and Function Blocks CNC Machining Protocol. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC 2013), December 4-6, 2013, Johor Bahru, Malaysia.

Jameel Abbas, Adnan and Minhat, Mohamad and Abd. Rahman, Md. Nizam (2013) Improvement Performance Characteristics of CNC Turning Operation by Exploit Immune System's Properties. In: 2nd International Conference on Computer Engineering and Mathematical Sciences (ICCEMS2013), 5-6 December 2013, Kuala Lumpur, Malaysia.

Minhat, Mohamad (2013) CNC Machine System Via STEP-NC Data Model and Lab VIEW Platform for Milling Operation. In: 2013 IEEE Conference on Open Systems (ICOS), December 2-4, 2013, Sarawak, Malaysia.

Zahra , Hosseini and Hamed , Fazlollahtabar and Iraj , Mahdavi and Minhat, Mohamad (2013) A Mathematical Model for Waste Management in Reverse Supply Chain. In: Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management, January 7 – 9, 2014, Bali, Indonesia. (Submitted)

Minhat, Mohamad (2013) ADVANCED MANUFACTURING: TECHNOLOGY REVIEW ON THE FABRICATION OF AN AIRCRAFT COMPONENT (FISH-HEAD). In: National Conference on Engineering Technology 2013, 1 - 2 July 2013, Shah Alam Convention Centre (SACC, 1 - 2 July 2013, Shah Alam Convention Centre (SACC). (In Press)

Minhat, Mohamad (2012) Design and Machining Control via Interoperable Function Blocks and STEP-NC Data Model. In: 3rd International Conference on Design and Product Development (ICDPD 2012), December 29-31, 2012, Montreux, Switzerland.

J.A., Adnan and Minhat, Mohamad and Abd Rahman, Md Nizam (2012) Artificial Immune System (AIS) Algorithm For Optimizing Shear Zone Temperature In CNC Turning Operation. In: 2nd International Conference on Design and Concurrent Engineering, 15-16 October 2012, Equatorial Hotel, Melaka..

Abbas, Adnan Jameel and Minhat, Mohamad and Abdul Rahman, Md. Nizam Bin and Akbar, Habibullah (2012) Future prospects of turning processes optimization using metaheuristics methods. In: International Conference on Uncertainty Reasoning and Knowledge Engineering ICURKE 2012, 14-15 Aug. 2012, Jakarta, Indonesia.

Minhat, Mohamad (2012) Interoperable_CNC_Machine_via_Function_Block_and_STEP-NC_Data_Model_for_Milling_Operation. In: 4th International Conference on Mechanical and Electrical Technology , 26-26 JULY 2012, KL.

Minhat, Mohamad (2012) Design and Machining Control via Interoperable Function and STEP-NC Data Model. In: International Conference on Flexible Automation and Intelligent Manufacturing, June 10-13, 2012, Helsinki, Finland.

Minhat, Mohamad (2011) An Assessment on Graphite Milling Characteristics. In: International Conference and Exhibition on Sustainable Energy andAdvanced Materials (ICE SEAM 2011), October 3-4, 2011, Solo-Indonesia.

Daud, Mohd Elias and Yusof, Yusri and Minhat, Mohamad (2011) A framework for a development of an intelligent CNC controller based ON step-NC. In: International Conference on Manufacturing Science and Technology ICMST 2011, 16 - 18 September 2011, Singapore.

Salleh, Mohd Shukor and Minhat, Mohamad and Che Zainal Abidin, Nik Mohd Farid and Arep @ Ariff, Hambali (2011) System Framework Tools For Future CNC Machining. In: 2nd International Conference On Mechanical And Manufacturing Engineering (ICME 2011), 6 - 8 June 2011, PICC, Putrajaya.

Arshad, Nurul Hidayah and Arep @ Ariff, Hambali and Samsudin, Abdul Rahim and Minhat, Mohamad (2011) Application of Integrated Kano’s Method and Quality Deployment Function in New Product Development Process. In: International Conference on Advanced Manufacturing 2011 , May 23 – 24, 2011, TATi University College, , Terengganu.

Daud, Mohd Elias and Yusof, Yusri and Minhat, Mohamad (2011) A review of intelligent CNC controller development based on step-NC. In: 2nd International Conference on Mechanical and Manufacturing Engineering (ICME 2011), 6 - 8 June 2011, PICC, Putrajaya.

Minhat, Mohamad and Xu, Xun (2010) ‘STEPNCFBUoA’ - An Advanced Manufacturing Control System based on STEP-NC and FB enabled technology. In: The 2nd International Conference on Engineering and ICT (ICEI 2010), 18-20 February 2010, Holiday Inn, Melaka.

Minhat, Mohamad and Xu, Xun (2009) A feature-based Machining Using Function Block Technology. In: IEEE International Conference on Control and Automation, December 9-11, 2009, Christchurch, New Zealand .

Minhat, Mohamad and Xu, Xun (2008) Development of an Open Soft CNC System Based on STEP-NC and Function Blocks. In: 5th International CIRP-sponsored Conference on Digital Enterprise Technology (DET), 22-24 October 2008, Nantes, France.

Book

Abd Rahman, Ammar and Subramonian, Sivarao and Minhat, Mohamad and Abd. Rahman, Md. Nizam and Salleh, Mohd Rizal (2013) Manufacturing Process Volume 1. Penerbit Universiti UTeM.