Items where Author is "Mohammad Taha, Mastura"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 29.

Abdul Kudus, Syahibudil Ikhwan and Syah Lubis, Abdul Munir Hidayat and Amran, Ammar Syafi and Mustafa, Nuzaimah and Mohammad Taha, Mastura and Shaharuzaman, Mohd Adrinata (2024) Flow analysis and shear rate comparison of counter-rotating and co-rotating intermeshing twin-screw extruders for filament extrusion of polypropylene-based biocomposites. Pertanika Journal of Science and Technology, 32 (S2). pp. 1-20. ISSN 0128-7680

Yusuf, Yusliza and Mohammad Taha, Mastura and Omar, Nooririnah and Ghazali, Mariyam Jameelah (2023) A brief overview of the marine environmentally friendly anti-fouling surface strategy. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 237 (6). pp. 1384-1393. ISSN 1350-6501

Yusuf, Yusliza and Wong, Chun Yip and Mohammad Taha, Mastura and Mustafa, Nuzaimah and Che Daud, Zuraidawani (2023) New wood dust reinforced recycled polypropylene composite filament and traditional polypropylene filament for FDM applications: Life cycle assessment study. Journal of Sustainability Science and Management, 18 (9). pp. 157-170. ISSN 2672-7226

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Mohammad Taha, Mastura and Mustapha, Faizal and Leman, Zulkiflle (2023) A review of natural fiber-based filaments for 3D Printing: Filament fabrication and characterization. Materials, 16 (11). pp. 1-16. ISSN 1996-1944

Lau, Kok Tee and Mohammad Taha, Mastura and Abdul Kudus, Syahibudil Ikhwan and Chung, See Ern (2023) Effect of print bed's heat flow on curling and surface roughness of FDM-printed abs sample. Jurnal Teknologi, 85 (2). pp. 211-222. ISSN 2180-3722

Mohammad Taha, Mastura and Mohd Farhan Han, Syaza Najwa and Mansor, Muhd Ridzuan and A. Rahman, Muhamad Arfauz (2022) Investigation of tensile and fexural properties of kenaf fber‑reinforced acrylonitrile butadiene styrene composites fabricated by fused deposition modeling. Journal of Engineering and Applied Science, 69 (1). pp. 1-18. ISSN 1110-1903

Mohammad Taha, Mastura and Norrrahim, Mohd Nor Faiz and Mohd Nasir, Mohd Hakim and Razali, Nadlene and Ahmad Ilyas, Rushdan and Knight, Victor Feizal (2022) Effect of chemical treatment of sugar palm fibre on rheological and thermal properties of the PLA composites filament for FDM 3D printing. Materials, 15 (22). pp. 1-15. ISSN 1996-1944

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Mohammad Taha, Mastura and Mustapha, Faizal and Leman, Zulkiflle (2022) Investigation of ABS-Oil Palm Fiber (Elaeis guineensis) composites filament as feedstock for fused deposition modeling. Rapid Prototyping Journal, -. 01-13. ISSN 1355-2546

Ishak, Mohamad Ridzwan and Ahmad, Mohd Nazri and Mustapha, Faizal and Mohammad Taha, Mastura and Leman, Zulkiflle (2022) Rheological properties of natural fiber reinforced thermoplastic composite for fused deposition modeling (FDM): a short review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 98 (2). pp. 157-164. ISSN 2289-7879

Muhammad, Noryani and Mohammad Taha, Mastura and Mustafa, Nuzaimah and Zakaria, Nazri Huzaimi and Che Hamid, Hazliza Aida and Shaharuzaman, Mohd Adrinata and Loh Y.F (2022) Statistical analysis of the performance of young's modulus of natural fiber composites and synthetic fiber composites. Jurnal Teknologi, 84 (6-2). pp. 151-162. ISSN 180–3722

Lau, Kok Tee and Mohammad Taha, Mastura and Abd Rashid, Norhanani Hidayati and Manogaran, Devaki and Ahmad, Mohd Nazri (2022) EFFECT of hBn fillers on rheology property and surface microstructure of ABS extrudate. Jurnal Teknologi, 84 (4). pp. 175-182. ISSN 2180–3722

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Mustapha, Faizal and Mohammad Taha, Mastura and Lukista, Debby Dyne and Ghazali, Ihwan and Leman, Zulkiflle and Irianto (2022) Application of Taguchi method to optimize the parameter of Fused Deposition Modeling (FDM) using oil palm fiber reinforced thermoplastic composites. Polymers, 14 (11). 01-15. ISSN 2073-4360

Jumaidin, Ridhwan and Abdul Halim, Harith Hilman and Mohammad Taha, Mastura and Ab Ghani, Ahmad Fuad and Mustafa, Nuzaimah and Zakaria, Nazri Huzaimi and Abdul Kudus, Syahibudil Ikhwan and Yaakob, Mohd Yuhazri and Aziz, Alia Ruzanna and Keshavarz, Meysam and Salleh, Tuan Suhaimi and Rushdan, Ahmad Ilyas and Saleman, Abdul Rafeq and Razali, Nadlene and Abdul Munir, Fudhail and Shaharuzaman, Mohd Adrinata (2022) Thermal and mechanical properties of thermoplastic cassava starch/beeswax reinforced with cogon grass fiber. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 96 (1). pp. 53-59. ISSN 2289-7879

Mohammad Taha, Mastura and Siti Azura, Ahmad Tarusan and Abdul Kudus, Syahibudil Ikhwan and Hussin, Mohamed Saiful Firdaus and Razali, Nadlene and Mansor, Muhd Ridzuan (2022) Concurrent material selection of natural fibre filament for fused deposition modeling using integration of analytic hierarchy process/analytic network process. Journal of Renewable Materials, 10 (5). pp. 1221-1238. ISSN 2164-6341

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Mohammad Taha, Mastura and Mustapha, Faizal and Leman, Zulkiflle (2021) Rheological and morphological properties of oil palm fiber-reinforced thermoplastic composites for fused deposition modeling (FDM). POLYMERS, 13 (21). 01-14. ISSN 2073-4360

Hussin, Mohamed Saiful Firdaus and Ahmad, Mohd Nazri and Jumaidin, Ridhwan and Mohammad Taha, Mastura and Mansor, Muhd Ridzuan and Muhamad Damanhuri, Amir Abdullah and Mukhtar, Mohd Fariduddin and Wahid, Mohammad Khalid and Zakaria, Azrul Abidin (2021) Effect Of Surface Roughness On Oil-Water Separation For Oil Skimmer. ARPN Journal Of Engineering And Applied Sciences, 16 (17). pp. 1742-1750. ISSN 1819-6608

Razali, Nadlene and Dhar Malingam, Sivakumar and Jamadi, Aida Haryati and Mohammad Taha, Mastura and Lazim, Yusriah and Rushdan, Ahmad Ilyas (2021) Natural fibre filament for Fused Deposition Modelling (FDM): a review. International Journal of Sustainable Engineering, 14 (6). pp. 1988-2008. ISSN 1939-7038

Jumaidin, Ridhwan and Mohd Zainel, Siti Nuraisyah and Adam, Nur Wardah and Hussin, Mohamed Saiful Firdaus and Ab Ghani, Ahmad Fuad and Mohammad Taha, Mastura and Yaakob, Mohd Yuhazri and Ahmad, Mohd Nazri and Maidin, Nurul Ain and Wahid, Mohammad Khalid and Ab Rahman, Mohd Hidayat and Osman, Mohd Hairizal and Mansor, Muhd Ridzuan and Mohamad Yatim, Nor Azlina (2021) Thermal Degradation And Mechanical Characteristics Of Sugarcane Bagasse Reinforced Biodegradable Potato Starch Composites. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 78 (1). pp. 157-166. ISSN 2289-7879

Salit, Mohd. Sapuan and H. N., Salwa and Mohammad Taha, Mastura and Zuhri, Mohd Yusoff Moh (2020) Life Cycle Assessment of Sugar Palm Fiber Reinforced-Sago Biopolymer Composite Takeout Food Container. Applied Sciences, 10 (22). pp. 1-21. ISSN 2076-3417

Sapuan, S. M. and Hamdan, N. Salwa and Mohammad Taha, Mastura and Zuhri, Mohd Yusoff Moh (2020) Application Of Shannon’s Entropy-Analytic Hierarchy Process (AHP) For The Selection Of The Most Suitable Starch As Matrix In Green Biocomposites For Takeout Food Packaging Design. Bioresources, 15 (2). pp. 4065-4088. ISSN 1930-2126

Sapuan, S. M. and Muhammad, Noryani and Mohamed Yusoff, Mohd Zuhri and Zainudin, Edi Syams and Mohammad Taha, Mastura (2020) Statistical Inferences In Material Selection Of A Polymer Matrix For Natural Fiber Composites. Polimery, 65 (2). pp. 105-114. ISSN 0032-2725

Hussin, Mohamed Saiful Firdaus and Mohd Yassim, Halyani and Zakaria, Azrul Abidin and Jumaidin, Ridhwan and Mansor, Muhd Ridzuan and Mohammad Taha, Mastura (2019) Fully Automatic Solar Powered Oil-Water Separation System For Grease Trap Controlled By Arduino: A Conceptual Design. International Journal of Recent Technology and Engineering, 8 (4). pp. 1266-1271. ISSN 2277-3878

Sapuan, S. M. and Mohammad Taha, Mastura and Muhammad, Noryani and Zuhri, Mohd Yusoff Moh and Zainudin, E. S. (2019) Material Selection Of A Natural Fibre Reinforced Polymer Composites Using An Analytical Approach. Journal of Renewable Materials, 7 (11). pp. 1165-1179. ISSN 2164-6341

Jumaidin, Ridhwan and Adam, Nur Wardah and Azlan, Umar Al-Amani and Hussin, Mohamed Saiful Firdaus and Mohammad Taha, Mastura and Mansor, Muhd Ridzuan and Yob, Mohd Shukri and Ahmad Ilyas, Rushdan (2019) Water Transport And Physical Properties Of Sugarcane Bagasse Fibre Reinforced Thermoplastic Potato Starch Biocomposite. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (2). pp. 273-281. ISSN 2289-7879

Muhd Ridzuan Mansor, Muhd Ridzuan and Taufiq, M.J. and Mustafa, Zaleha and Jumaidin, Ridhwan and Mohammad Taha, Mastura and Firdaus, Firdaus, H. M.S. and Basori, Basori (2019) Thermal And Mechanical Behaviour Of Recycled Polypropylene/Polyethylene Blends Of Rejected-Unused Disposable Diapers. Journal of Advanced Manufacturing Technology (JAMT), 13 (3). pp. 13-23. ISSN 1985-3157

Mohd Sapuan, Salit and Mohammad Taha, Mastura and Muhammad, Noryani and Moh Zuhri, Mohd Yusoff and Zainudin, Edi Syams (2019) Material Selection Of Natural Fibre Using A Stepwise Regression Model With Error Analysis. Journal of Materials Research and Technology, 8 (3). pp. 2865-2879. ISSN 2238-7854

Salit, Mohd. Sapuan and H. N., Salwa and Mohammad Taha, Mastura and M. Y. M., Zuhri (2019) Analytic Hierarchy Process (AHP)-Based Materials Selection System For Natural Fiber As Reinforcement In Biopolymer Composites For Food Packaging. Bioresources, 14 (4). pp. 10014-10046. ISSN 1930-2126

Mohammad Taha, Mastura and Mansor, Muhd Ridzuan and Mohd Farhan Han, Syaza Najwa (2019) Thermal And Melt Flow Behaviour Of Kenaf Fibre Reinforced Acrylonitrile Butadiene Styrene Composites For Fused Filament Fabrication. Defence S and T Technical Bulletin, 12 (2). pp. 238-246. ISSN 1985-6571

Mohammad Taha, Mastura and Salit @ Sinon, Mohd Sapuan and Mansor, Muhd Ridzuan and Abdul Aziz, Nuraini (2016) Application Of Hybrid Sugar Palm-Filled Polyurethane Application Of Hybrid Sugar Palm-Filled Polyurethane Composites In Conceptual Design Of An Automotive Anti Roll Bar. Journal of Engineering and Technology (JET), 7 (1). pp. 102-113. ISSN 2180-3811

This list was generated on Wed Oct 9 04:54:49 2024 +08.